Limit Mail Server 5.1.5 attachments

Hi all

Does anyone know the terminal command to increase the limit of the attachment on Mac OS Server?

It seems it has been removed the app server settings.

Thank you

ebrind

Try this:

OS X Server: setting limits of size of message for the e-mail service - Apple support

The document is a bit long in the tooth, but as far as I know, the method still works.

C.

Tags: Servers and Enterprise Software

Similar Questions

  • Mail server integrated with FTP

    I am looking for a solution to the problem of large attachments that are underway through Microsoft Exchange Server 2003. I suppose a solution to the problem is to have a mail server outgoing specially configured which detaches attachments from any greater than 1 MB email, generates an ftp account and inserts a message at the top of the email saying "go to ftp://Username:Password@ft (the username and password must be generated automatically for temporary) for fixing referenced in this e-mail."
     
    Y at - it something like that? I did some research on Google, without success.

    SUPPORT IS LOCATED IN THE FORUMS OF EXCHANGE SERVER:
    http://social.technet.Microsoft.com/forums/en-us/category/ExchangeServer/

  • No e-mail entering the e-mail server

    Dear friend,

    I made a new configuration on ASA5505. This ASA to connect a switch that spread from the user and the mail server.  User from the local network able to browse the Internet and send emails to user/e-mail external. The problem is no email don't come through the outside entrance to the mail server.
    Is there something missing on the config. It is NAT? or my ACL
    (ISP - ASA 5505 - switch - mail server)

    Here is the config.
    !
    interface Vlan1
    nameif inside
    security-level 100
    IP 192.168.100.1 address 255.255.255.0
    !
    interface Vlan2
    nameif outside
    security-level 0
    IP address s.s.160.26 255.255.255.252
    !
    interface Ethernet0/0
    switchport access vlan 2
    !
    2KFQnbNIdI.2KYOU encrypted passwd
    passive FTP mode
    DNS server-group DefaultDNS
    domain default.domain.invalid
    inside_access_in of access allowed any ip an extended list
    outside_access_in of access allowed any ip an extended list
    outside_access_in list extended access permit tcp any any eq
    POP3
    outside_access_in list extended access permit tcp any any eq
    SMTP
    inside_nat0_outbound list of allowed ip extended access everything
    192.168.100.240 255.255.255.252

    pager lines 24
    asdm of logging of information
    Within 1500 MTU
    Outside 1500 MTU
    mask IP local pool 192.168.100.240 pool - 192.168.100.242
    255.255.255.0

    ICMP unreachable rate-limit 1 burst-size 1
    ASDM image disk0: / asdm - 523.bin
    don't allow no asdm history
    ARP timeout 14400

    Global 1 interface (outside)
    NAT (inside) 0-list of access inside_nat0_outbound
    NAT (inside) 1 0.0.0.0 0.0.0.0 dns
    public static s.s.160.26 (Interior, exterior) 192.168.100.250
    subnet mask 255.255.255.255

    inside_access_in access to the interface inside group
    Access-group outside_access_in in interface outside
    Route inside 0.0.0.0 0.0.0.0 192.168.100.250 2
    Route outside 0.0.0.0 0.0.0.0 s.s.160.25 1

    Hi Mohd,

    Something seems wrong with the NAT configuration.

    You forgot to hide the IP address on VLAN 2, that is your ip of the interface. (I'd edit the post and making it s.s.160.26).

    So, if your external interface ip,'s s.s.160.26, while NAT static (inside, outside) s.s.160.26 192.168.100.250 may not exist!

    You need to have something like:

    public static tcp (indoor, outdoor) interface smtp 192.168.100.250 smtp

    public static tcp (indoor, outdoor) interface 192.168.100.250 imap imap

    public static tcp (indoor, outdoor) interface 192.168.100.250 pop3 pop3

    In addition, another suggestion I would give:

    Have the input access list outside_access_in extended ip allowed any one isn't safe. However, if you only use it to troubleshoot e-mail server problems, then it is fine. Remove in case of actual production.

    I hope this helps.

    -Shrikant

    PS: Please mark this question as answered if it was resolved. Note the useful messages. Thank you.

  • Cannot change the incoming mail server. no text highlight

    I am unable to send mail from my Mac.  No problem with iphone or iPad. Cannot change incoming mail server as text is not highlighted.  Cannot change the server for outgoing (SMTP) mail. Cannot change the list of SMTP servers. Says offline.

    Hi Granny Smith 1.

    Thank you for using communities Support from Apple. Sorry to hear that you are having problems with mail. It's a little bit clear exactly what you see when you say that you cannot change any server info, but if you continue to have problems sending or receiving mail, you will find the troubleshooting steps in the following article useful:

    If you cannot send or receive e-mail on your Mac - Apple Support

    Kind regards.

  • Settings for the outgoing (SMTP) mail server for icloud

    Settings for the outgoing (SMTP) mail server for icloud, please provide the setting advanced account. Thank you!

    Hope this helps: iCloud: server for e-mail clients - Apple support settings

  • e-mail account working do not mistake the e-mail server for this account does not

    One of my Gmail account does not not via Thunderbird. He worked for until our days. Get them an error message saying
    "The current operation on the Inbox doesn't have to succeed. The e-mail server of the account... responded: unknown command 34
    the e-mail server for this account in not responding do not, the unknown command...)

    I delete this email account and re-created with the same problem. The unknown command is different everytime I try to get new messages...

    See if that helps.
    https://productforums.Google.com/Forum/#! subject/gmail/KB-HRs8VGsg

    In any case, it looks more like a problem of Google, so you can also ask in a forum of Google.

  • Error reported: Thunderbird will try to download a message that says that there is no such thing as the mail server. 86 other pending messages

    For the last two days, I can't get the messages. The following error message appears: "the RETR command failed. Error when retrieving a message. "Mail server pop3.tiscali.co.uk responded: cannot open the file ' /nfs2/mailgb/mail_29/27/12/a.lockley%tiscali.co.uk/0A70004056E64E83.msg' errno 2, the file does not exist. He has apparently 86 messages to download and more are arriving regularly

    Looks like there may be a logjam caused by either the webmail junk folder or more old not yet downloaded email.

    Try this:
    Account sign-in webmail via a browser.
    Empty folder 'spam' to the server.
    In Thunderbird new attempt to get the Messages.

    If still a problem:
    Access webmail.
    Read email oldest, but not yet downloaded.
    Delete or move to another folder.
    In Thunderbird new attempt to get the Messages.

    Report on the results.

  • mail server rejects emails because it does not relay. What is the relay?

    I'm trying to set up an e-mail account on my imac, iphone and the ipad. Implementation was a success on the imac and can send and receive messages to test. However, in putting in place ACCT even on phone and Tablet returns an error msg "... the recipient ' my @me.com apple" was rejected by the server because it does not relay ".". " The sender email acct server rejects email or the receiving email server rejects it? Regardless, how to fix? IOS and newer and operating system are installed on all devices.

    Relay, this is how mail servers send messages between them. You are not a mail server, you will need to login with the appropriate credentials. The configuration for sending mail is bad for the account that you are using. These settings are found under SMTP, the main server at the bottom of the account settings. The automatic configuration of iOS is perhaps not good for the server. Since he works on the iMac, you can use it as a guide. Look especially for the SSL port number required and the type of authentication (password, etc.).

  • Cannot send email from a computer that is not on the same domain as the e-mail server

    We have just set up a mail server on Amazon. I can send email from the fine command line. I can send and receive e-mail from a PC connected to the Amazon with Thunderbird field. I can receive e-mail from a PC outside the realm of server (Amazon) with Thunderbird mail, but cannot send mail. I always get an error in time-out to a PC outside the field of Amazon. The SMTP settings are identical between computers connected to different areas. All necessary ports are also open. Any help would be greatly appreciated.

    It was a problem of incoming firewall after all. Problem solved.

  • Password restricted to 16 characters when sending messages via the mail server outgoing Live/Outlook

    When you use a plus 16-character password, Thunderbird fails to connect to the SMTP outgoing/outlook live.

    The problem persists after you turn off my AV, turn off my VPN, from Thunderbird in safe mode and even after the addition of a '1' at the end of my password 16ch.

    Interestingly, Microsoft has the following warning when changing your password:
    WARNING: passwords longer than 16 characters cannot be used with the Xbox 360

    See the attached screenshots.

    It is a limitation imposed my mail server, not Thunderbird. It is not just the Xbox it's all e-mail clients. The major problem is, Microsoft either don't use folk with general IT experience, preferring the Microsoft professionals who really don't know anything else or deliberately do everything except web mail as difficult as possible. They want you in Microsoft walled garden.

    I'm starting to see four Internets. Apple, Microsoft, Google one, then the open internet, the champions of Mozilla, unfortunately none of the other three Internet really want interoperability. They like vendor lock-in...

  • Error message from the mail server to start with open Manager-password

    When I start TB the password manager ask me the master password.
    When I do not write the master password directly with in 60 seconds, I get an Errormessage of the Mail-Server!
    Why connect TB for the mail server before writing the master password in the InputMask password manager?
    Pref..:
    "mail.startup.enabledMailCheckOnce", false
    "mail.server.server1.login_at_startup", true
    "mail.server.server1.check_new_mail", true
    "mail.server.server1.check_time", 30
    "mail.server.server1.download_on_biff", true
    "mail.server.server1.headers_only", false
    "mail.server.server1.leave_on_server", false
    Fig 1 is directly after starting TB
    Photo 2 is after 60 seconds

    I guess that's the effect you described:

    When I do not write the master password directly with in 60 seconds, I get an Errormessage of the Mail-Server!

    You can try to install this add-on.
    https://addons.Mozilla.org/en-us/Thunderbird/addon/StartupMaster/

    This should stop from trying to access the account before entering the password to Thunderbird.
    Note, it is in no way a measure of security.

  • The mail server responded: 5.7.0 must issue a STARTTLS

    I checked that the settings of the server are also STARTTLS and TB updated to the latest version, restarted the computer.
    I always get the same message
    An error occurred while sending mail. The mail server responded: 5.7.0 must issue a STARTTLS command first. Please make sure your e-mail address is correct in your account settings and try again.

    You are showing us the entry window. Try again in the main Thunderbird window.

    Perhaps have you checked the parameters of the incoming (POP/IMAP) and not the outgoing (SMTP) settings?

  • mail server rejected my sent folder as infected - how can I check it?

    I am in discussion with my email provider having known a lot of my emails rejected by the mail server which has identified as spam or infected - I want to wave avg on the last rejected email but how to find if its buried with others in a single file?

    Please note that AVG is selling personal information and data navigation to their clients free AVG. Or the said their new privacy policy.

  • Creating new email accounts but ONLY Inbox is displayed. Rsh, Snt, Tmplts, DRTS are not. Related: mail server rejects DFSP user even if I copy fm c/Panel

    E-mail server for domain uutupelo.org name is under my control with c/Panel. I added a new account with c/Panel with an appropriate password. The account displays correctly on c/wood. When I use T/bird 38.2.0 to add this new account, that account is found and the settings displayed, but when I PASTE the password in Tbird, the "password or username" is rejected.
    When the account appears in T/bird ONLY shows the Inbox (or sometimes up to 19 inboxes show although I have installed the new feature tested). I have no folder for sent, drafts, models or Trash. T/bird will not accept actions of "New folder" either for the new account.

    These files can only be generated when there is something to put in it. Did you send or delete all messages yet? Or registration as a project?

    You say that you are pasting a password. This means is not a trivially-memory string and uses, shall we say, the characters 'exotic '? E-mail protocols have a narrow idea of what is a valid character. Nonalphanumeric characters can not be accepted by e-mail (pop, imap, smtp) protocols, while being OK via the http protocol used in Web-based e-mail. This is why a password that works in a context cannot be good in another.

  • Emails sent via Thunderbird are not saved on the e-mail server.

    I have a critical problem with the backup of the emails I sent to Thunderbird.

    The application works very well, that everyone sent mail is correctly saved in the folder "sent" located in the e-mail account of TB.
    The problem is that messages are not saved on the mail server associated with (in this case, pop.mail.yahoo.com), so whenever I have to reinstall the software, I lose all my outgoing emails. If I access my email on yahoo.com account and email from there, it is regularly saved in the sent folder there.

    I would be grateful if someone could
    (i) say me if it is a known problem, and if there is a way to remedy through Thunberdird server or Composition settings.
    (ii) if there is a way around the problem by saving the file 'sent' located in the Thunderbird mail folder on my HARD drive. Is it possible, after the reinstallation of the application, to paste the file sent to the Mail folder? And I want to save the "Sent.msf" file as well?

    Thank you much for the help.
    L

    The problem is that messages are not saved on the mail server associated with (in this case, pop.mail.yahoo.com),.

    With a POP account, this is the expected behavior. Only the Inbox folder is visible on the server, all the other files are the.
    https://support.Mozilla.org/en-us/KB/glossary-terms-including-types-accounts#w_pop

    To access the other folders on the server, for example your sent folder, you need to configure your account as an IMAP account.
    https://support.Mozilla.org/en-us/KB/glossary-terms-including-types-accounts#w_imap

    so whenever I have to reinstall the software, I lose all my outgoing emails.

    You should not need to reinstall the software in the first place. And even if you do you will not lose any position, unless you deliberately remove your Thunderbird profile.
    With pop, all mail is local to your computer, including the "sent" folder.
    http://KB.mozillazine.org/Profile_folder_-_Thunderbird

    If there is a way around the problem by saving the file 'sent' located in the Thunderbird mail folder on my HARD drive.

    In fact, you must back up the entire profile.
    _ http://KB.mozillazine.org/Thunderbird: _FAQs_:_Backing_Up_and_Restoring

    Is it possible, after the reinstallation of the application, to paste the file sent to the Mail folder?

    As said before, nothing is lost when reinstalling the application. If you want to move to a new computer by simply moving the profile.
    http://KB.mozillazine.org/Move_to_a_new_PC

    do I have to save the "Sent.msf" file as well?

    If you want to backup files individual mail, you don't need to save the *.msf files. They are just the index files and contain no mail. They are rebuild automatically when you start Thunderbird.
    In any case, to save the entire profile is the recommended method.

Maybe you are looking for

  • EliteBook 8530w becomes extremely hot!

    I have an Elitebook 8530w for a few years now and for a few weeks, it's extremely hot, without the laptop even do anything just to be inactive in windows. I can bear high enough levels of heat with my hands, but the temperature of the air coming out

  • Satalite L500-1XD: cutting short lack buttons next to ' POWER on ' switch

    I just bought a Satalite L500 - 1XD Intel i3, 4 GB DDR3 laptop off Argos. Between the two speakers, I noticed there is only 1 button to turn it on. I've seen a lot of photo of this laptop and I saw this laptop to Tesco and all have 5 buttons between

  • selection of icon on the desktop opens C:\ DOS window

    If I select 'My Computer', 'My downloads' or 'My pictures', the DOS window opens.  I believe that this has happened when an update has been made for my computer.  I'm not sure the update or which may have caused this.  I am able to remove the BACK di

  • Cannot find windows vista product key

    It was preinstalled on my Emachines... but I swapped cases and no longer have the original case with the product key.

  • Smart photo printer all-in-one 7510 vertical lines on copies

    When I have the paper source in the feeder to copy, copies made will have a vertical line to the bottom of the page.  When I scan to make a copy, copies do not have lines. Any suggestions?