Limit on the expansion of network?

I have 3 AirPort Extreme base stations, 2 are 5th generation and a 3rd generation. I also have an AirPort Express in the mixture. I have a 3rd generation connected to the FiOS router and I consider that it is the "primary" router Initially, it worked. I had 2 Extreme extending by connecting to the 'main' and the Express has been connected to one of the Extreme 2 extension. This morning, an extreme extension 2 has been disconnected. The error was that he was unable to expand the network. I checked the range and it's well within 100 feet of the central station. I checked the network password and that's OK. I unplugged the other extreme, which extends and restarted then that gave the error. This time, he connected very well to the main but when I turned on the other that I had turned off, he started too give the error of not being able to expand the network.

Yes, is there as a limit to how many base stations can connect to one to extend a network?

I checked the range and it's well within 100 feet of the central station.

100 feet is quite far away... even if you have line of sight between the main airport and the airports of their extension. If there are walls on the signal path, get a good signal for extending airport is going to be quite a challenge.

The golden rule for the placement of an airport that will extend wireless is the place to a point that is about halfway between the airport and the area that needs more wireless coverage.  For example, if you need more wireless coverage has a few rooms at the other end of the House, extending airport would be located in between the main airport and the other end of the House.

The reason is that the airport expansion "to extend" the quality and the speed of the signal it receives. If it is located too far from the main airport, then it gets a signal low and slow to expand, so there are few vested benefits.

I had 2 Extreme extending by connecting to the 'main '.

Understand that.  If all goes well, the two extremes are found as they are at equal distance between the main airport and each Extender... And each extension's closest major airport that it is another extension unit.

and the Express has been connected to one of the Extreme 2 extension.

The Express is unable to extend the signal to a device that is already expanding the network. In other words, you can have multiple devices, the expansion of the network, but each extension must connect directly to the main airport... not at another airport that already is the extension of the network.  In your case, the AirPort Express is actually 'join' the network... so it will work for AirPlay or a printer USB remote... but the Express provides no additional wireless signal coverage in this type of installation.

For the moment... try turning off all the... from the 'main' airport and all other airports.

Wait a few seconds and then starts the 'main' airport and run a minute or two

Turn on one of the extreme airport which extend the network and let it run for a minute or two

Assuming that the AirPort Extreme that works you just turned correctly, turn on the other AirPort Extreme

Post back your results, and we are going to discuss options for the Express.

Tags: Wireless

Similar Questions

  • the name of the local computer network card limit has been exceeded

    noticed that my domain root name has been defined for the replication of the dns to the domain only. When I tried to return to the replication with the forest, I got the above message. It will obviously be let me no change without correction of this error. No other error message appears in the newspapers.

    Hi Monroetech,

    You can read the following article and check if it helps:

    Error message: the name of the local computer network card limit has been exceeded

    Hope this information is useful.

  • Photosmart 7510: Access to the separate wifi network printer

    I have 2 wifi networks, for the expansion of the range in my house; We built my router (Fios) fios and others (Asus) connected to the same router via ethernet.  My printer is connected to the wifi Fios network.  When I'm at the back of the House, I connect my laptop to the Asus wifi network but am unable to connect to the printer.  Is there a way to make the printer visible on both networks?

    Hi @lsrothstein,

    Welcome to the HP Forums!

    I see you're wondering if you can access the printer HP Photosmart 7510 of several networks at once. I'm happy to answer that question for you!

    The printer is designed to work only on wireless at the same time. So to be able to print to the printer, the cell phone/mobile device must be connected to the same wireless network to which the printer is connected to. think of it as an invisible cable from the computer to the router, to the printer.

    This website, HP Wireless Printing Center - basics wireless, goes into great detail, if you are interested.

    Hope that answers your question and have a great day!

    "Please click the Thumbs up icon below to thank me for having responded."

  • Change the type of network "private."

    Hello, I have three NICs in a computer - two LANs and a WiFi adapter.

    LAN1 is the domain network (and correctly apply the firewall domain profile).
    LAN2 is virtualbox virtual card, it is always 'public '. It was not (and are not) all the options to change.
    LAN2 and WiFi are merged in public place 'Networks' unidentified

    How can I move LAN2 location 'private' instead?

    My desired configuration-
    LAN1 stays "domain."
    LAN2 becomes "private".
    WiFi adapter is "public".

    This way I can config adv.firewall using profiles (that is how it should be used, isn't it?). From now on, I have TO use a profile for all locations (public profile), limit all the rules by IP scopes and deactivate all other profiles to avoid confusion.

    The system is 64-bit Windows 7 Professionsl

    Open the network and sharing Center.  Under LAN2, it should say 'Public '.  Click on 'Public' and you should get the option to change in private.

    -B-
    http://www.officeforlawyers.com | http://www.OneNote-tips.com
    Author: Guide to counsel for Microsoft Outlook

  • The limit of the device must be less than or equal to the limit of life cycle license in first cisco 2.2

    Hi all

    I have seen under error in the tool main 2.2 Cisco infrastructure

    The limit of the device must be less or equal to the limit of license of life cycle and also secondary device ISE inaccessible since premium.

    Could you please suggest how we can solve your problem.

    Thanks in advance...

    Kind regards

    Sachin

    Yes. Life cycle license are by smart device managed. See this page for a good overview:

    http://www.Cisco.com/c/en/us/support/docs/cloud-systems-management/Prime...

    .. as well as this page:

    http://www.Cisco.com/c/en/us/products/collateral/cloud-systems-Managemen...

    .. who States:

    Life cycle license: allows access to all the features of the life cycle, which includes the configuration of the devices, image management software, basic health and performance monitoring, fault management, troubleshooting and customer visibility on the network. The license of the life cycle is based on the number of managed devices. Life cycle of the licenses are available in sizes from package of 25, 50, 100, 500, 1000, 2500, 5000, 10,000 and 15 000 devices and can be combined as needed to reach a total number of device under license.

    A device is uniquely identified through the assigned IP address and system object ID (SysOid). Routers, switches, light/unified access points and network first Cisco (NAMs) analysis Modules are charged on the number of licenses. If a switch stack is managed via a single IP address, it counts as a single device. A single frame will, however, be counted as multiple devices if the chassis is configured with several IP addresses. For example, a switch with several service cards, such as a firewall and so forth, or a stackable switch with an IP address assigned to each switch who is involved in the stack is considered multiple devices within the first Cisco Infrastructure. Cisco Wireless LAN controllers (WLCs), autonomous and peripheral access points third are not counted against the number of licenses.

    When you have more devices that licenses, you will receive the error see you and prevented from adding additional devices to your inventory.

    We see it more often when it is light (i.e. not independent) APs are added to a wireless controller. PI will not prevent the new APs to be added, they are managed under their association with the WLC. However, if you try to add a new switch it would prevent you to do until the deficit of licenses has been sent.

  • 907 invalid cod exceeded the limit of the number of OS 5 bytes

    Hello

    I do face-down issue with jad installation from a Web server. I put all my files of cod with a jad file in our weserver. and appealed to the jad file. After a few seconds, the message as below. The same thing works with phone OS 6 version, but not with the OS 5

    907 invalid cod exceeded the limit of the number of bytes

    Thank you

    RAM

    If you are testing on simulators on the same PC running the same MDS Simulator, the article on connection limits may apply.

    Sorry beat me to it, I've never had the OS 5.0 browser throw up his hands on a download I created it, that the OS 6.0 browser was fine with.  The size of your files is not huge.

    If you really want to count the MDS Simulator out run, start the WiFi on the 5.0 OS simulator (manage connections--> set up the Wi - Fi network, you follow the nose, and then start the WiFi on the device), then change the configuration of the default browser (--> Advanced--> browser Options) in the Hotspot browser.  Stop the MDS Simulator and see if you can still browse.  Then, try the download again.

  • New installation fails during the expansion of the files Windows 7 Pro

    Recently, I built a new computer after my old man died. I installed Windows 7 Pro, I had on the old system. Everything worked well for about a month. Then I started having various errors, some suggesting a memory error. I ran several times using the most comprehensive parameters of memtest and no problem not found. Further inspection, I discovered that a critical system update was applied just before that the problems started. I decided to roll back the change. It does not solve the problem. I tried to do a system repair. That did not work. She only had basic as IE11 and Skype applications. I had also installed the utilities for the motherboard and graphics card. So, I decided to do a clean install. Each time, it fails during the expansion of the files. The error message is, "Windows cannot install required files. The file may be corrupted or missing. Make sure all files required for installation are available, and restart the installation. "Error code: 0 x 80070570." He gets up to 30% each time. I tried to install for a V300 Kingston SSD (120GB). I also tried another SATA II HDD (750 GB) with the same problems. I downloaded a new ISO and tried to install from that. Yet once, it is not at the same point. I noticed that whenever it creates a partition system reserved 100 MB which is almost full. At one point, I got a message saying that there are about 8 000 MB of free space. (I think that was all trying to manually unzip the files by a tip I found online). I found several suggestions for similar problems, but the solutions proposed did not help. I'm sure it will be a simple solution, but I'm out of ideas. Any help would be appreciated.

    Motherboard: MSI MPower Max
    CPU: Intel i7 - 4770 K 3.5 GHz (not overclocked)
    RAM: Crucial Ballistix Sport 16G (2x8G) DDR3 - 1600 MHz
    SSD: Kingston SSDNow V300 Series 120 GB (no special driver needed)
    HARD drive: Seagate 750 G 7200 RPM SATA II
    Video: EVGA GeForce GT 2 640 GB
    Case: Corsair 400R
    Power supply: Corsair TX650M
    CPU cooler: H80i
    DVD: HP, BluRay BD R/W drive
    OS: Windows 7 Professional 64-bit upgrade (the old computer was an XP update)
    CPU Temp is around 42 C.

    If Memtest86 fails then you need to get into the BIOS and set the RAM timing.  Memtest86 + displays the calendar then use the value displayed and compare to the real specs for your memory.  Also, you may need to increase the voltage to the RAM (in BIOS) place a small amount.

    As regards the function of Intel EIST, let her enabled for now. Then enable it after installing Windows successfully.

    =============================================================

    It's the set of test utilities that I use on every new system that I'm building.

    Note: If you are OverClocking or use an automatic overclocking or BIOS power saving features, start by disabling: Intel EIST, Turbo Mode, Cool and pretty and fall back to the speed of stock as a starting point.

    Disconnect any other (additional) internal hard drives and external USB devices.
    Look for any loose hard drive power or cables SATA, graphics card or other power cables.

    First run Memtest86 +:
    It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
    sticks are bad or the values of the SPD in the BIOS are correct.
    Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
    http://www.memtest.org/
    Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
    http://www.overclockers.com/forums/showthread.php?t=409152

    Hard drive test:
    If you do not know your readers of the brand and model, try "Speccy",.
    It provides information from the computer/system in detail:
    OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
    Note: Option RAM indicates number of slots, DRAM Timing.
    Works your memory speed (frequency). The nominal frequency of your memory.
    http://www.Piriform.com/Speccy

    Test your player - create a Bootable CD:
    Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.
    Note: Reliability of HDD sank medium over the past 18 months.

    Test your drive with the car manufacture utility.
    If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
    (bootable CD) and check bad sectors.
    SeaTools for information: http://www.seagate.com/support/downloads/seatools/
    SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
    SeaTools for DOS download:
    http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

    For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

    Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
    Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm

    Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
    Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
    http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities

    Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/

    Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
    http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

    ============================ SSD Test Software =============================

    Intel® drive SSD Toolbox
    https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18455

    Life of the SSD: http://ssd-life.com/

    OCZ Toolbox: http://ocz.com/consumer/download/firmware

    SanDisk SSD Toolkit: http://kb.sandisk.com/app/answers/detail/a_id/9328/

    = Once Windows installed =.

    Device drivers: have you installed latest drivers from device of the manufacture of the motherboard?
    Check their support site for the latest drivers as the CD that came with the computer
    or motherboard may be older and less stable drivers.

    Visit the download of the manufacture of the graphics card:
    Download and install the most recent Windows 7 or 8 drivers for your card.
    ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
    NVIDIA: http://www.nvidia.com/Download/index.aspx?lang=en-us

    See also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos
    or equivalent ATI.

    Prime 95:
    http://www.Mersenne.org/freesoft/
    It's a stand alone .exe file contained in an archive .zip.
    Simply choose to run the 'stress test' option for 8 hours or more.
    If your PC can pass this test, your memory and CPU
    are very good (close the housing cover in order to maintain adequate ventilation)

    Core Temp:
    The temperature of each core of the processor.
    Note: For the overclockers using stock radiator and cooling fan Intel/AMD you can expect
    a range of 35 to 40 at idle and 60 to 65 C max temperature when running Prime95.
    http://www.alcpu.com/CoreTemp/

    CPU-ID (CPUZ): http://www.cpuid.com/cpuz.php
    Watch the clock speed of the CPU under various conditions of loading
    (when using speed step technology Intel EIST).
    #1 Note:
    CPU - ID has two tabs - tab 'Memory' that shows the actual speed of the memory
    and the "SPD" tab shows the nominal speeds for each memory location that is filled.
    #2 Note:
    COMPARE the two values, the actual speed of the memory must not exceed the rated speed of your memory.

    CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.
    voltages, temperatures, fans speed.
    http://www.CPUID.com/HWMonitor.php

    Test of Stress of FurMark GPU (graphics card):
    http://www.oZone3D.NET/benchmarks/fur/

    Pass marks burn in test: http://www.passmark.com/
    Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.

    HD Tune:
    Provides information of the car and has an option (tab scan error) to test your drive.
    http://www.hdtune.com/

    CrystalDiskInfo:
    http://CrystalMark.info/software/index-e.html
    User Manual: http://crystalmark.info/software/CrystalDiskInfo/manual-en/
    Monitoring the State of health and the temperature. Solid State Drives brackets (value of the software).

    SpeedFan:
    Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
    It displays your drives model number and compares your drive with other discs of the same brand and model.
    Note: Unfortunately now includes a lot of bloatware, be very careful when installing remove bloatware.
    http://www.almico.com/SpeedFan.php

    GPU - Z:
    A utility light, designed for you give information about your video card and GPU.
    http://www.techpowerup.com/GPUZ/

    PC WIZARD:
    A powerful utility designed especially for detection of hardware, also analyses more.
    He is able to identify a large scale of system components and supports the latest technologies
    and standards.
    http://www.CPUID.com/pcwizard.php

    J W Stuart: http://www.pagestart.com

  • UC 540 VIC 4 FXO ADD CARD IN THE EXPANSION OF VIC SLOT

    Hi all

    I would add an extra card to 4 FXO VIC to the 540 CPU expansion slot. I can add additional VIC 4 FXO card without adding DSP modules. ?

    Same device I need to create the System Attendant service auto. What are the necessary permit for the auto attendant?

    Product details are given below

    UC 540 VIC 4 FXO ADD CARD IN THE EXPANSION OF VIC SLOT

    Processor UC540W - FXO - K9 (MPC8358) of Cisco (revision 0 x 100) with 235520 K/K 26624 bytes of memory.

    MPC8358 CPU Rev: Part Number 0x804A, Revision ID 0 x 20
    30 user licenses
    10 FastEthernet interfaces
    2 terminal lines
    1 module of virtual private network (VPN)
    4 FXO voice interfaces
    4 FXS voice interfaces
    1 voice interface MoH
    1 802.11 radio
    1 cisco service engine (s)
    128 KB of non-volatile configuration memory.
    250880K bytes of ATA CompactFlash (read/write)

    Kind regards

    Jose Ajay K

    Hi ajay1komban,

    You don t need a permit for the System Attendant service auto and expansion slot VIC, you must take into account the Conference and transcoding of design, you can check the total number of session from this link:

    http://www.Cisco.com/c/en/us/products/collateral/unified-communications/...

    If this was helpful, please rate.

    Kind regards.

  • An iPhone Unlocked verizon 7 will work with the T-Mobile network?

    I expect to buy an iPhone 7. I am currently using T-Mobile, but I'll probably use CDMA-based network when I spend my winter in China. Anyone know if an iPhone Unlocked verizon 7 will support the T-Mobile network? Thank you very much

    If you look at the following:

    http://www.Apple.com/iPhone/LTE/

    iPhone 7 seems to have 2 different CDMA models:

    model A1660 (CDMA) iPhone 7

    model A1661 (CDMA) iPhone 7 more

    and 2 different models of GSM:

    Model A1778 iPhone 7

    Model A1784 iPhone 7 more

    My guess is that the models of Verizon (CDMA) do not work on the T-Mobile GSM network. Data connection does not work at least LTE. Not sure about the voice. T-Mobile and AT & T models may support data LTE in both networks.

  • Can't remember how to access my setings bcc, so how to cancel the limit on the number that I can answer in what concerns?:

    Received a message that had been directed to a number of recipients and wanted to respond to all:, but who exceeded my limit on the number of addresses for to: and Thunderbird would not accept.

    I went through a process of establishing a way to have e-mail messages to multiple recipients automatically addressed to bcc

    Maybe it's a supplement that you have installed.

    As part of this process, I put a limit on the number of recipients that would be treated as "to:.".

    Is Thunderbird built-in AFAIK. Check your add-ons and all the settings that you can do.

  • How can I configure the order of networks wifi on my iPhone 6?

    I was browsing the Internet and looking for throughout my general settings but I'm not able to find a way to configure the order of networks wifi on my phone, as I can with my MacBook Air (via Network Preferences > advanced > tab Wi - fi). I had to do a reset to the factory on my router settings and now my iPhone automatically connects to another wifi network in the building which is distant; and, as a result, poor reception. He will also choose my device Chromecast before my own router, so I have to go and manually choose my router every time.

    Is my only option to "forget this network" for the device Chromecast and the other network wifi. Therefore, to move my router plus high in the list (and then add those two later, put further down in the hierarchy list), or y at - it a simple way to just change the order? Thanks for the help.

    Settings > Wi - Fi > select the network to which you want to connect, enter the password.

  • Why do I get the message 'a network error occurred during the processing of your order'?  I was able to print an album without problem about a month ago

    I am trying to print a photo book, but get the message "a network error occurred during the processing of your order.  Please check your network connection and try again.  I had no problem with the printing of a book about a month ago.

    Start in Safe Mode, Mac OS x: Safe Mode bootand try to order from there.

    Don't forget to check out the book before ordering this Apple; Get an overview of a project on paper in Photos, iPhoto or Aperture to avoid problems - Apple Support. Save the PDF to be compared with the printed version when coming out.

  • HP laserjet p1102w: wireless printer does not work with the new wireless network

    My office moved recently and we have a new wireless network. My printer always wireless worked perfectly on the previous network, but it does not work with the new network. I get a message "the printer is offline. I don't know how to reconfigure so that it detects the new wireless network. Can anyone help? Thank you

    Hi Shlomi,
    Thanks a lot for the info. I'll give it a try today...

  • MacMini don't auto connect to the preferred wireless network when the router reboots

    My MacMini is located to join my favorite wifi network. Where I stay, there is usually a power failure close to a minute or two during the day.

    My setup is such that my MacMini running 24 x 7 with a backup uninterruptible but my router (AirPort Express) turns off during the power outage. When the router goes off, my Mac disconnects from the network which should, but now when my router turns, the MacMini reconnect to the preferred network.

    It shows the network preferred list, and when I manually click on this subject, it reconnects immediately without asking for password. But this will not happen automatically.

    If I restart my MacMini it reconnects very well. The problem occurs only when my MacMini is but my router restarts.

    To reproduce this problem on your side, just turn off your router and once your Mac disconnects from the network back on the router. See if your mac reconnects to your wifi fine.

    Any solution or advice for this problem?

    Thank you.

    Please test after taking each of the steps that you have not already tried it. Stop when the problem is resolved. Back up all data before making any changes.

    1. If possible, test at another network, such as a public access point or hotspot created by a mobile phone. Some Wi - Fi routers are not fully compatible with Apple devices. More specifically, the security mode for the network, as shown in the network preferences window, should be 2 personal WPA or WPA 2 Enterprise. If the router doesn't support either of these modes, it should be replaced with another.

    2. make sure that the network is on the list of favorites by following these instructions. It is important to read the article, as it is the starting point for further efforts to solve the problem. If you skip any step, the problem cannot be resolved. Make sure that the box marked

    Remember this computer has joined the network

    is checked.

    3 follow the instructions in this article to support.

    4. reset the PRAM.

    5. take note of all your parameters of connection Wi - Fi in the network preferences pane, then remove the connection in the connection list and re-create it with the same settings. This by clicking on the icon of the lowest sign from the list of connection, select Wi - Fi as the interface in the form that opens. Select join the other network in the network name menu, then select your network. Enter the password when you are prompted, and then save it in the keychain.

    6. in the menu location at the top of the network preferences window, select Edit locations. A sheet will fall. Click on the plus sign to create a new location. Give it the name of your choice. In the new location, set up the Wi - Fi service with the same settings that you used before. Click on apply and test.

    7. run the Keychain Access application. Find and remove all the network password AirPort elements that refer to the network. Make a note of the password first.

    8 turn off the Bluetoothand the test.

    9. reset the system management controller.

    10. This step should not be necessary, but he has been advised by the Apple Support in some cases, apparently as a solution for a bug. Open the energy saving pane in system preferences. If necessary, click the lock icon in the lower left corner to unlock the settings. When prompted, enter your administrator login password.

    Select the Power Adapter tab and uncheck the boxes marked

    Continued access to the Wi - Fi network

    and

    Enable the NAP...

    If it is present. Then, if the computer is a MacBook, select the stack tab and uncheck the box

    Enable the NAP...

    11. reinstall OS X.

  • In Mail 9.2 OS 10.11.3 the limit between the list of my mailboxes mailbox and my messages keep slipping backward.  Make me feel seasick!  Can I disable this feature?  I want a stable limit!

    In Mail 9.2 OS 10.11.3 the limit between the list of my mailboxes mailbox and my messages keep slipping backward.  Make me feel seasick!  Can I disable this feature?  I want a stable limit!  (I really don't care for any of the new movements of the screen in El Capitan slide-wiggly.)  I don't know if there is

    'fixed' to try!  Help, please!

    Why do you think it is a "feature" as opposed to something to go wrong with your Mac?

    The border between my message list and the display of messages remained constant for several years now.

    Nothing moves, nothing is serrated blade.

    My mailbox list is always hidden, but when I open it, it remains a fixed width.

    I even tried the stupid "full screen" mode and could not see to do random movements, unsolicited.

    I have no idea what would cause the behavior you're seeing.

    No matter what do you do when it happens? Like maybe click on the voicemail of show/hide button?

Maybe you are looking for

  • Ah, tried everything cannot get rid of Claro

    I've tried everything I can find, cannot get rid of Claro.Must find a way, don't like to give up on Firefox

  • Recovery of the Internet

    I tried internet for disk recovery, was the OS x download, was arrested in the Center and told to contact apple support. My question is has the server found something irrelevant in my Macbookpro and wants me to clearfy with them or what? Because they

  • WinHTTP.dll does not work with TLS 1.1 and TLS 1.2

    We cannot send https requests to our payment processors using windows 7 with winhttp.dll or msxml6.dll because it is not support TLS 1.1 and TLS 1.2 on Windows 7 and windows 2008 R2 server I have the same version of winHTTP.dll 6.1.7601.17514; winHTT

  • Garretbp questions about loading a game of low-end pc on Windows 7.

    Recently, I had to have a hardrive replaced at reputable pc store where I bought originally from my pc. Until I'm there, another store I respect updated my OS from XP to Windows 7. Everything worked well. When I recently had my hardrive replaced with

  • How to export pictures to a removable USB device?

    How to export photos to the photo gallery Windows on a removable USB device?