Limit the audio via the acquisition of data, what is the analog output rate of the pci-6014?

Hello

I'm trying out audio buffers thanks to an acquisition of data pci-6014. Audio files normally have a sampling rate of 44.1 kHz, but I noticed that when I try to exit, at this rate, that I get an overflow error. I checked the datasheet and it shows a rate of output of 10 K samples per second, way too slow!

This device 6014 is quite expensive but are still unable to a stereo sound output signal... ? Is there a way to bypass this limit? It is not sensible to pay $1000 one another.

See you soon.

I don't think there is a way to increase the analogue of rates. The 6014 is old enough. A better card and cheaper, would be the 6221.

Tags: NI Hardware

Similar Questions

  • When I send a 5v of data acquisition, the voltmeter indicates 5V, but when I connect a "normally open" valve Parker for the acquisition of data, the voltage decreases automatically a.14 V. It seems to be grounded. Why is this happening?

    We send 5v data acquisition using a voltage generator. Hook us it up to a voltmeter and see 5V. When connect us the generator voltage to a valve "normally open" parker, the voltmeter indicates .14V. It seems that when we connect the two sons of the valve for the voltage generator, the son act as pattern. We want to control the voltage flowing to tap through Labview. We checked the wires to the valve and they work very well, because if we send a constant 5V since the acquisition of data and put ashore, she, the voltmeter indicates 5V. Someone knows why the son act as pattern and low blood to .14V?

    nsatpute wrote:

    Our data acquisition is NI USB-6259. The valve requires only a 5V max and our DAQ provides up to 5V. However, after connecting the valve to the acquisition of data, the grave tension to almost 0. We start from the principle that the son somehow act as the reason, but we are not sure if this is the case.

    The question here is not how much voltage the valve wants, it's the current needs of the valve.  The 6259 can put only 5mA via an analog output.  Your very likely tap needs much more than that.  If you need to add in an amplifier circuit that can supply more current to operate your faucet.

  • How to limit the I/O in a data store?

    Hello

    Not sure if storage i/o control can accomplish what I want. so, here's the scope. We have an EMC e 3300 connected via iSCSI on our ESXis 5.0 U2. We have a virtual machine that generates a lot of IO.

    Is there anyway to limit the OPS are / s to a specific virtual machine to the data store, so it not to saturate the pipe set iscsi?

    Thank you

    There is a limit of IOPS / s on the virtual disk as an option... You can assign to that.

    http://KB.VMware.com/kb/1038241

  • Edge counting and Source of Timing for timed loop on the request for Acquisition of data - not acquiring data on specified rising edge

    Operating system: Windows XP

    Hardware: PCI 6259

    Terminals used: PFI0 and PFI2

    Counters used: Ctr0 and Ctr1

    IM developing an application for the acquisition of data where timed loop synchronization source comes from my PFI2 (using the string A of an encoder).  IM basically trying to acquire data based on the number of ticks from my encoder.  For the synchronization source, I use counter 1 to capture the rising edge and have the loop time-acquisition of data.  At the same time, Im using the counter 0 to count the number of rising edges so I know exactly in what tick data was acquired.  PFI0 and PFI2 are connect to channel A of the encoder.

    Questions:

    Timed loop acquires data at each tick, because when I discover the data (text) file is missing count of my encoder value.  Is it because there is a limitation on the Windows operating system?  I used a noculars to measure the frequency at the maximum rotation of the channel encoder and 6,757 kHz.  All solutions?

    Also, is there anyway I can route the source channel internally an encoder to generate synchronization source instead of using another counter?  I have attached my VI.

    Hello

    All the samples that you acquire will be read by LabVIEW in a sequential manner. Figure 4-21 on the M-series on page 80 (4-34) shows that you will acquire all the samples you request all channels that you enjoy in sequentially.

  • Difficulty to read the instrument of series and acquisition of data simultaneously.

    Greetings,

    I have some trouble getting my VI read from my data acquisition and instrument of the series at the same time.  If I run the Subvi simultaneously (i.e. subANG runs in a window and subVEL is running in a second window) both return the correct values and behave as I expect.  However, if I call the Subvi in a society mother VI and try to run them both in the same loop structure subANG gets stuck and won't be reprobed with a signal change.

    I also tried to use a stacked sequence or plate to separate the execution of subVEL and subANG, but I still get no response to subANG.

    The point is is that, if I run Parent.VI in a single window and then creates a copy of subANG (call it '--copy' or other) and run it in a second window, Parent.VI behaves properly and will update the readings as they appear in '--copy '.

    I enclose 3 files.

    (1) subANG.VI - this bed an an inclinometer RS232 signal.  The signal is refreshed every 10ms or more.

    (2) subVEL.VI - this bed raw tension of a channel on the acquisition of data, calculates the average then that converts into a pressure difference and finally a speed based on the pressure and temperature inputs.

    (3) ParentVI.VI - they simply call and displays the Subvi

    My guess is that it's a buffer problem, but I am confused.  Someone out there in Labview Earth knows why this might be happening?  Suggestions welcom.

    It is not an instrument of series.  It is a UEI PowerDAq with their typical A/D and the cable.

    I found away to make it work by placing subANG and subVEL in some time different loops side by side in ParentVI.

  • What type of connections I do for the acquisition of data PCI 619 card pins? What I have to give it to the ground and the CCV on the pins of the connector myself? What should be the value of the SCR I need to give to the PIN?

    I have a PCI 6519 data acquisition card. I want to install it on the PC and use it outputs to control a robot. I have problems with the connections to the terminal block which is attached to the cable.

    What type of connections I do for the acquisition of data PCI 619 card pins? What I have to give it to the ground and the CCV on the pins of the connector myself? What should be the value of the SCR I need to give to the PIN?


  • Acquisition of data using the DAQ card

    Hello everyone

    I need assistance with the acquisition of data of the generator of signals through DAQ cards. I plugged the signal to the SCB-68 generator where the analog inputs of the generator are connected to AI CH5 and AIGRND of the Terminal Board. Then the output of the block is connected to the DAQ card. The maximum sampling frequency of the card is of 250 kech. / s. The problem is for reason that I am not able to see the waveform on the labview. I looked at other examples to find the problem, I am, but I am not able to understand this. I want to be able to choose the sampling frequency. I attatched my code as an attatchment for you all to help me know what the problem is. Any suggestions will be appreciated.

    There is no task!  You have not specified any hardware (i.e. your data acquisition card) anywhere.

    Here's a suggestion.  MAX aperture.  Find your DAQ hardware.  Open a Test Panel.  Implement a continuous sample of N Points to some sampling rate.  Press Run and convince yourself that you get the data.

    Now, while remaining in MAX, to create a task, using the same settings.  Call for example something sensible ("MyFirstDAQTask" is not a good reputation).

    Now, go back to your code.  Eliminate the first two functions DAQmx.  Wire a constant task to the DAQmx Start feature.  See the little triangle down?  Click it, and it should show you the tasks he 'sees', the only one should be the task that you created in MAX.

    Note that 'Samples Visible' is now 'hard coded' in the task.  To get its value back out, you need to put a property node Timing DAQmx after the task start and pull on the quantity of the sample, samples per channel (which, for reasons that escape me, is a Dbl, you need to convert to an I32 before importing it into the while loop).

    Bob Schor

    P.S. Thank you to join your code.

  • How to connect dwyer SERIES 629 differential pressure transmitter to the acquisition of data 9219 and read the signal?

    Here is my sensor
    Pressure sensor

    Here's the DAQ data sheet:

    ACQUISITION OF DATA NOR 9219

    Here are my issues:

    First of all I don't know what is LO and HI exactly in the DAQ 9219 material.

    Second, I don't know what pin code I should connect the DAQ sensor signal wire. PIN 4 or 5 pin? The sensor has three pins, and I guess I should connect the other two wires to the power supply.
    Thirdly how to calibrate the sensor. In labview choose voltage in the wizard?

    I'm pretty new in this acquisition of data and I need your help.

    Thank you

    Hi SilasIII,

    Hmm well 3 sons are probably on the ground, the power and the return signal. The datasheet for the sensor says:

    First of all, you need to know which model you have (4-20mA, 0 - 5V or 0-10VDC). HI refers to the return signal, LO essentially means the land of the food that feeds the sensor. Then, you must get the 13-30 VDC supply. I don't think this should be too complicated and can be a simple wall DC power. You can learn how to create a custom in DAQmx scale. I hope that this is a starting point.

    Kind regards

    Eric

  • Restarting a task for the acquisition of data inside a For loop

    Hello

    I need iterate through my acquisition of data. Currently, I'm doing this through the creation, implementation and tasks for the acquisition of data inside a loop For which is iterated according to the needs of compensation. Unfortunately, the creation of these DAQ tasks slow down my code.

    I would like to be able to create the tasks outside the loop, pass them in and revive the tasks at the beginning of each iteration. Is there an easy way to do this?

    Otherwise, is there a way to make the standard DAQmx digital startup trigger trigger several times (so that it starts each pulse data acquisition in a long pulse rather than just the first pulse train)?

    Thank you!

    -Evan

    I whent before and created this example for you (and many others.)

  • request to help build a vi to acquire a signal of pc6251 for the acquisition of data and perform fft it can u people please help me? Thanks in advance

    Hi all... I learn LabVIEW since few days.i want to acquire a signal of pc6251 of acquisition of data and perform fft it can u people please help me? Thanks in advance

    If you do only use LabVIEW for a few days, you should get familiar with it first by looking at some of the resources available here. After that, you can watch heredata acquisition.

    After reviewing these documents, you can post back with any specific questions.

  • Sampling frequency for the output of an acquisition of data USB-6211 card?

    Hello-

    I use a CGI CMOS FireWire camera to read an interference figure, then using a transformed of Fourier transform spectral interferometery (FTSI) phase recovery simple algorithm to detect the relative phase between the successive shots.  My camera has a linear 28 kHz scan rate, and I programmed my phase retrieval algorithm take ms ~0.7 (of a trigger of camera at the exit of the phase). I use the live signal to control a piezoelectric stack, by sending a voltage single sample to the analog output of a data USB-6211 acquisition card.

    Send this output voltage increases the time of my loop 4 m, I would really like to achieve a 1 kHz or better sampling rate. Is the problem with my DAQ card or with the processor in my computer? The DAQ cards of NOR can support these speeds?

    Thank you

    -Mike Chini

    Hey Mike,

    With USB, your loop rate will be around or under 1 kHz, even on the best of the systems. USB has a higher latency and less determism PCI and PCIe. You can get rates AO one much better sample on a PCI card, potentially a PCI-6221. We have a few HAVE points of reference for targets of RT for PCI, / AO in a loop, you should be able to get similar performance in Windows, but if you do a lot other treatments may suffer from your local loop rates.

    Hope this helps,

    Andrew S

  • Calendar for the acquisition of data on the USB-6212

    I am putting together a sound teaching laboratory.  The basic idea is to send a pulse signal that powers a speaker, and then the acoustic signal travels down a waveguide where it is measured with a microphone and sent to a data acquisition.  One of the important things here is that it is possible to measure the time of propagation of sound waves, so I need for data collection to occur at a time determined with reference to the sound output pulse.  I tried with a sound card, but there are number of milliseconds of random jitter between the writing and the reading of the sound card.

    So, I was watching the USB-6212.  On paper it seems ideal: 2 outputs and lots of inputs.  What I understand, it is possible to trigger analog outputs and data entered so that there is no jitter synchronization between them.  The only question is this: I was thinking about using 2 analog inputs: a reference which collects through a microphone/speaker system to serve a normalization to the second chain that collects through waveguide (see diagram).  The thing is that I need the "timing" on the 2 analog to be consistent and a jitter free so that it is possible to compare the phase of the signals that I collect.  This will be possible using this data acquisition system, given that the ADC is multiplexed between the channels?  There will be a delay between channels 2 and if so it will be known and deterministic?

    Thanks for your help...

    Ben

    Hi Ben,

    Cool application!  To answer your question-Yes, there is a delay, and it is deterministic. Something to note about the 6212 is that your rate of multiplexing will be determined by the clock to convert.  The clock to convert will operate at the faster pace of the device more 10us *.  In the case of the 6212, with Max sampling rate of 400kS/s (aggregation), your pulse will produce each ((1/400,000) 12.5us + 10).

    * 12.5us converts to 80 kHz, so at that point there, convert clock it simply runs at 1 /(aggregate rate). So to sum this up:

    From 0 to 80 kHz: there is a lag multiplexing 12.5us

    From 80 to 400: there is a shift of /(aggregate rate) 1

    In addition, you can also set this rate through the DAQmx driver.  "You can just use a property DAQmx Timing node' more' converted ' rate (or rate Maximum to determine the max).

    If it's a problem, I advise to use a device with simultaneous sampling - let me know if you have any other questions.  Take care!

  • Use two assistants for the acquisition of data at the same time

    Hello

    I want to read multiple data channels of analog inputs on my DAQ hardware. However, when I try to create two separate data acquisition assistants for each entry, it gives an error saying "is reserved for the specified resource. The operation could not be performed as indicated "." Can't use two assistants for the acquisition of data at the same time?

    I have to add different channels in the same assistant DAQ? I tried, but I couldn't separate the data in different graphs.

    How does this work?

    Kind regards

    Allard

    You can't have multiple tasks of the same type (in this case inputs analog) on the same device.  Just so having 1 DAQ Assistant read all your channels and separate your channels for individual transformation.

  • Read for the acquisition of data entries are overwritten

    Hey there

    I have a Daq reading input in a spreadsheet file

    Data acquisition was told that one is supposed to have some time a loop around it and I cannot get it to run without one, so good

    But my main problem is that it means that it replaces my written file each time that the loop repeats

    He also asked me to choose the file to write in several times

    How would I go about fixing this?

    Thank you

    Yes, you can convert digital to the chain, check the attached VI. I recommend you to go through the basic materials of LabVIEW and also play with example of NEITHER which comes with LabVIEW. Remember not to use the attached example and the acquisition of data, always use separate loops.

  • Generation and acquisition at the same time, acquisition of data USB-6356

    Hello

    I have a VI how is able to read entries with a USB DAQ-6356 and I use a generator of signals 'Agilent 33522 A '. I want to generate and acquire with the acquisition of data.

    In fact it works but not well, the frequency is not very stable and does not stop the 2nd loop with 1 (2nd is generating, 1 is Acquire).

    Thanks in advance

    P.S my VI isn't a state machine true because I need to fight against it at the moment.

    OK, so you're at 3 ms/s in writing and reading at 1.25Ms / sec and you wonder why he has a little difference in the frequency set?  Ideally, you want to read and write to share a sample clock but by selecting at least the same frequency clock (or one that is one multiple of the other) would go a long way to fixing this source of your error.

    The second source of error: you generate a contineous waveform.  unless you select 'whole number of cycles' there is a discontinuity when the end is reached at an arbitrary phase and the phase is reset to zero at the beginning of the wave.  DAQ assistant writing can "Use Waveform Timing" to adapt its sync settings to the dt waveform and the number of samples.

Maybe you are looking for

  • If I am infected with malware?

    Hello! This is my first post in the forum, but I followed the discussions since I got my MacBook and the community is very useful. I decided to create this post to ask the experts of the view. I received a phone call from the network admin at my Univ

  • Equium L350 - 10L - how to install the latest Intel graphics driver

    Hello I noticed that my graphics drivers (display) are 2007.The Intel GMAX3100/GM965 site is 2008 drivers but it won't let me install these, it does not say for this production. Toshiba drivers are drivers of 2007 and I NEED the drivers of 2008.Toshi

  • iTunes separating artist for each song by the same artist

    This is something that concerns me for a long time. After you add a few Radiohead songs to the collection, it wouldn't put them in the same section of the artist. In this case a very large number. So I thought that any other time in this case, I have

  • Can I remove a secondary VI running?

    I've seen examples of screw insertion in a high school, but when you insert a new VI, the code deletes the current VI still and he drops. Is there a way to "share" one VI for another, but let it run in the background?

  • error code message appears not

    Hello I tried to create a set of labview error codes codes using the tools-> edition of error codes.  Has created some test errors and saved the file C:\Program NIUninstaller Instruments\LabVIEW 2009\user.lib\errors The file called test - errors.txt