Limitations of data Dashboard App

Similar Questions

• Indicator of waveform data dashboard with multiple locations

  I have a chart in waveform with multiple locations on my main VI running.

  I use the Application Dashboard data 2.2.1 on my Ipad to monitor table of wave shape of my running app.  I placed a marker on my Ipad and also related waveform with my waveform array variable.  I can't play my data dashboard application because it shows unable to connect to the server.  I noticed that it is because of multiple plots being plotted on my table of waveform.

  I could only play the App data dashboard when it is just a single parcel related to an indicator on the App.

  My question is if it's possible to have a graphical indicator of waveform on a data dashboard that has several plots being plotted and not only a single square, and how to configure it?

  Thank you.

  Click on Bravo and select as an accepted answer.  You are welcome.

• Problem in the use of data dashboard

  Hello

  I wanted to start with data dashboard application, I installed the app on my phone Android mobile phone.

  I followed the document started with the http://www.ni.com/white-paper/13757/en/ dashboard data

  the screen illustrated in this document comes when I start the application in my laptop.

  The first screen

  

  The second screen after add touch

  

  The last screen that gives an error

  

  Waiting for response.

  Concerning

  resolved after seeing www.youtube.com/watch?v=FCujba8euWc

  Thank you all

• QMH data dashboard

  Hello

  I did a program using the messages in queue (QMH) Manager based on the continuous measurement and logging example comes with LabVIEW 2013.

  I want to view and control the program using the control panel data with web services (for Ipad). I followed this tutorial;

  https://decibel.NI.com/content/docs/doc-40079

  With the help of this tutorial, I am able to connect my desired and indicators controls on the dashboard of data.

  But when I run the dashboard of data, it does not interact with the program. If however, I have the web resource vi of the program itself if works.

  I made a dummy vi which simply creates a random number and it works fine, using the web services of data dashboard.

  Does anyone know what I am doing wrong?

  Kind regards

  I would try to set up the Web server port for the EXE to a different number; something very far from standard 8080. So make sure you that data dashboard is the port for your EXE and not your project.

  I've never tried defining two Web servers to run on the same port, but I had problems with port conflicts (using the same port for the project and as a result of the EXE) using VI server.

• Data dashboard showing "no supported variable... »

  I work with dashboard of data for Android, a mobile phone of Sony, and I followed the whole procedure to create, build and deploy a web service.

  I am able to access the Web server of the data dashboard application, and I can also visualize Web Services and their deployed variables.

  The problem is when I select a particular variable deployed; I show a message "no supported variable... "when I select this, I am taken back to the home page of the dashboard of data. Here is the photo of the message I get.

  I checked the data types of the variables network I used in my VI, and they are all supported by the dashboard of data.

  Does anyone have an idea about what is really happening, and the reason for this message?

  I would be grateful for any help!

  Thanks in advance.

  e.

  
  

• A digital control takes no account of the limits of data at entry entry is typed, why?

  Limits of data located in the property entry seem to have no effect on data entry. A value written to a property node limit the contribution of the increment of buttons but not the data which are entered in the control. How to stop digital control to accept out of desired range values? In the attached example, why I can type in any number for control and data entry limit is ignored?

  In the Properties window of data entry for the digital control, you have the "answer of value out of range" ignore the value.  Change it to compel.

• Example of car iPad/Android data dashboard

  Some time ago there was a piece of information or something similar which showed a car UI on a Tablet (iPad/Android) using the LabVIEW data dashboard.

  Someone know where I can find this item? Can't find out more.

  You are thinking of engine Simulator that is here?

  Good luck

• How to show the output of the signalexpress power spectrum in data dashboard

  Hey guys.

  I made a program that collect analog data from two sensors in vibration, and then I use the signalexpress power spectrum to get in the frequency domain.

  I would like to show the signals and the FFT in dashboard of data.

  It is not possible to display the data directly because the XY graph in data dashboard supports only the two figures on the right cluster table?

  Is it possible to convert data from the spectrum of power signalexpress table of cluster of two numeric values?

  Or any other ideas would be appreciated

  

  
  

• Connection error android application OR data dashboard

  I did a project and vi on it. I did a shared variable, and it has successfully deployed. I want to pass this variable through my router wireless app android (dashboard OR data). I'm unable to connect it as when he asks me the address of the server on my phone I plugged it to the address 44.0.1.5, but always a connection error message. My router IP is 192.168.1.2, and even still the connection error message. I disabled my firewall and still... in short I want to see the value on my android app. Check it out the images that I attached. How to connect to a shared variable made on my pc and see it on the phone?

  Hey defined

  Have you reviewed this article for the hardware and software firewall configurations?

  http://www.NI.com/white-paper/12402/en/

  Frank R.

• I have limited cell data in my Z320 and want to browse, email and applications updated by wifi?

  I Z320 smart phone with the data of the limited phone and I would like to use wifi in the navigation, update apps and other animals that can wear out my data, can I do and how I can spend according to the data of the wifi phone?  Also I have dual sim, can I use a SIM data card slot and one for the phone and send SMS.  I'm still a novice, please bear with my stupid questions.  Thanks to all those who give their time to respond to my querries.

  SMS = text

  When wifi is connected, your phone uses Wi-Fi only, so you don't need to switch the SIM card, either by the way if you want to be 100% sure it will not be used, you can just use the quick toggle setting to toggle mobile data connection.

  phone Acer, normally there is a quick setting of mobile data, you just pull down the notification bar.

  Google game you don't need to activate, but check if updates will automatically install only if you are using wifi.

  https://support.Google.com/googleplay/answer/113412?hl=en

• "Data dashboard" version 2.0 list drop-down list seen only "one, two, etc.» Instead of the text Enum

  I am currently using the new data on an iPad dashboard 1. I'm coding in suite developer Labview 2012. I found that switches work very well when it is associated with a shared variable. I finally managed to get the drop-down list to control a shared variable of data type typedef/enum. This control very well within the Labview program, but on the dashboard of data drop-down list shows only the "One" "two" etc... instead of the text 'This' Enum 'As' 'Other' I can write back to the dashboard with a text conversion of the enum to the dashboard and place it in a display of string over the fall down. While this gives the operator a display of the current Typedef/enum, it is not very intuitive. They must select 'One' to view 'This' "two to display 'Than' etc...

  How can I get the dashboard of data drop-down list control to display the text of the enum instead of "one" "two" etc?

  I think the point was that your question belongs to this other forum, not the forum of LabVIEW.

  (I'll ask the moderator to move this thread i).

• How to use the graph of the intensity in the iPad data dashboard.

  Hello

  I use a graph of intensity in my vi main under a project of myRIO.

  I created a shared variable of the 2D array. When I selected the variable in the ipad it does not show that he presents in the pc...

  I want to mention that I have selected the multiplier as (= 30/255) 0.117647 in labview in pc

  I use the version of labview 2015 myRIO.

  and I am using iOS 10 in my iPad

  can someone help me please

  Hi adil,.

  The graph of the intensity is not supported in the dashboard of data.

  Kind regards

  Denny

  AE Singapore

• Data dashboard: pending on the user

  In trying to connect with dashboard of data from my laptop to my iPhone, I get the status message on the laptop wireless indicating "waiting for user to connect" with a yellow exclamation point.

  How can I move forward? Thank you!

  Oops! Figured it out! He expects the other device to connect.

  

• Data dashboard

  Hello

  Can someone please give me detailed instructions on how to perform measurements of

  9191 cDAQ chassis and see the results on smartphone using the dashboard of data.

  double post

• Missing data of App

  I recently had an intrusion on my hotmail account. I changed the password, update McAfee. However, when I rebooted my laptop, I get a message saying that I lack the following files

  c:\users\my account name\App Data\local\isuquqoq.dll

  c:\users\my account name\App Data\local\plinci.dll

  During use, when I close a window, I get an error message about the lack of application data for windows live sign in.

  Any ideas?  NOTE: less is better for me.

  Thank you

  No executable file must be loading from the AppData folder.  These files were probably part of a virus or spyware infection that has been partially removed. Run a full scan for virus/spyware.  If the problem persists, use the free Windows Sysinternals Autoruns tool to find and remove the reference to the files.

  For more information about how to use the Autoruns, please see:

  Autoruns for Windows Windows Sysinternals Autoruns Forum

  Boulder computer Maven
  Most Microsoft Valuable Professional