line and force the timestamps
Is there a reason why I shouldn't be able to use the range and force the timestamps? In this VI the value isn't being converted, but the scale is false. With the values out of range, it force exit.
Making the possible mistake of meet without first tested... is it possible that the problem is that you have traded the upper and lower limits? The timestamps are numbers and dates are a greater number. 12 being greater than 8, the upper limit should be 11/12/2014, and the lower limit should be 11/08/2014.
EDIT: after testing, Yes, it is definitely the problem. Exchange your upper and lower limits, and it will work as expected.
Tags: NI Software
Similar Questions
-
[Bug]? Line and force the comparison Mode
It seems that changing the Mode of comparison of the IR & C function with the tables or Clusters attached does not Type of spread, or anything that is responsible for the selection of the instance. By example, if I combine three tables at the entrances of IR & C, change the comparison mode for comparing aggregates, and then create an indicator of the range in? output, the result is the wrong indicator and a cut wire. Similarly, can I change the mode on a function IR & C with a wired in the range? output and it will not break the thread until a subsequent change triggers a recompilation or type of spread.
LV10 (no SP1) and Win7.
Hi Darin.K,
I was able to reproduce the behvior you see in LabVIEW 2010 SP1. If the tables are entered and the comparison Mode is the change in the creation of 'Compare the aggregates' indicator will incorrectly create an array of Boolean flags wired to a single Boolean result.
This was previously reported in a request for Corrective Action (RCA) and the behavior has been corrected in LabVIEW 2011. Thank you for taking the time to report the problem and apologize for any inconvenience it caused.
-
I want to do a VI that will show me how many random numbers from 0 to 100 range must be generated. After that VI needs to draw a histogram showing how much % of the numbers was 0-49 range and how much between 50 and 99. There was also two digital indicators showing how many numbers is both of these ranges.
I use ' line and force ", but for example if I generate numbers: 78, 97,74;
' First ' line and force "(50-99)" will show the output: 78, 97,74, which is correct.
"But second" line and force "(0-49)" will show the output 49,49,49 that I don't want. I just want to show in this example a zero.
After that I'll connect both inputs of histogram, will be OK?
See photo, thank you
-
I'm trying to create a PDF file with several signature lines in that anyone can "Sign" by using their digital signature CAC (Common Access Card) active. The goal is to have a single document that people can open, sign on a designated line and save the document (replacing the existing document) and close. Then another person can open the same document digitally sign another area of the form, save it, and close it. So on, and so on. Is there a way to do this? At the end of the day, I would end up with a PDF file with literally hundreds of signatures to enable different ACC everywhere...
I don't understand what the problem is. In the post of the davidr96549424 on May 8, 2015 07:58 you presented a structure of a correct document. Is the issue of the creation of this structure in a PDF file? For this, you will need an Acrobat, not reader.
XI in Acrobat, select Tools-> forms-Edit. Click 'No' on the form fields 'detect '. In the tasks Panel that opens, click on "add new field". Select "Digital Signature" and move it to the location in the document where you want to than the appearance of the signature to be. Repeat that for signature fields as you want. Users will sign by clicking on the prepared unsigned signature field which shows the dialog box "sign. Do not forget that as TSN has noted that a digital signature applies to the entire document. The entry in the document where it is is irrelevant. Each next signature covers all previous signatures.
Your users can also sign a document from anywhere that they want without signature fields already prepared. For this select fill & sign-> work with certificates and the type of signing you want to sign up with. A dialog box that will tell you a rectangle for the appearance of signature rises and after you draw the rectangle of the dialog 'Sign' rises.
PDF/Acrobat doesn't have a limit on a number of signatures in a PDF document. But! Don't forget that when you open a PDF file with Acrobat/Reader signatures valid all of them and takes time (several seconds - until 10 - for every signature), so if you have several signatures of dozens of their validation open can take a long time.
I don't know how build you your workflow so that each person signs the same PDF and saves it. Economy runs on the same computer where the PDF is stored. You'll have to decide how to allow different people to have access to the same PDF. They, of course, you may sign this only one-at-a-time PDF.
-
On the laptop typing jumps on another line and continues the text on the line
while typing in the jumps to cursor/type on another line. Sometimes in the middle of the previous text or else starts a new line somewhere towards the bottom of the page. This began several weeks ago, but is more and more often. without limitation Oulook, but more often happens. Has he done it 4 times during typing of these 3 lines.
Hi GuyTiffany,
Thanks for choosing Microsoft Community!
According to the description of the problem, you have problems with the computer mouse.
Please answer these questions to better understand the issue and help you.
1. What is the brand and model of the computer/mouse?
2 have you made any changes to the computer before the show?
Follow the below mentioned article:
Troubleshoot a wireless mouse that does not correctly:
http://support.Microsoft.com/kb/321122
Note: The article mentioned above also applies to the other mice as well.
Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.
-
update line and reset the value of the column
I have table (CORS_MTR) with 3 columns...
SEQ ID of the EPR the ID of the child / / desc 100 22 1 one 101 22 2 two new entry as 1 number , that means change the flow of child #
102 22 3 three When I enter the new line in number of children 1 instead of 2 and then the values of the column (child id, desc) another need to be reset as...
SEQ ID of the EPR the ID of the child / / desc 100 22 2 two 101 22 1 one 102 22 3 three 103 22 4 four SEQ PRT_ID CHILD_ID DESC_ 100 22 1 one 101 22 2 two 102 22 3 three declare
number of p_seq: = 103;
number of p_prt_id: = 22;
number of p_child_id: = 1;
p_desc varchar2 (25): = 'a ';
Start
Update cors_mtr
set seq = case when child_id = p_child_id
then seq + 1
other seq - 1
end
where prt_id = p_prt_id
and child_id (p_child_id, p_child_id + 1);
insert into cors_mtr (seq, prt_id)
values(p_seq,p_prt_id);
Update cors_mtr
Set child_id = (select max (child_id) + 1 of the cors_mtr).
desc_ = (select to_char (to_date (max (child_id) + 1, 'J'), 'jsp') of cors_mtr)
where child_id is null.
end;
SEQ PRT_ID CHILD_ID DESC_ 100 22 2 two 101 22 1 one 102 22 3 three 103 22 4 four Concerning
Etbin
-
Selection of parts and columns, or entire lines and apply the character style
I am trying to apply character styles to certain parts/whole rows and columns.
I can change individual cells with the following code...
table = app.selection[0]; if (table.hasOwnProperty("baseline")) table = table.parent; if (table instanceof Cell) table = table.parent; if (table instanceof Column) table = table.parent; if (table instanceof Row) table = table.parent; if (table instanceof Table) { table.rows[0].cells[6].texts[0].appliedCharacterStyle = "none report"; }
... but when I try to select an entire line, I get the error 'Object does not support property or method' texts. "" "When I try one of the following two codes.
{ table.rows[0].cells.texts.appliedCharacterStyle = "none report"; }
{ table.rows[0].cells.appliedCharacterStyle = "none report"; }
Anyone know how I can do the following?
1. Select any row (or column) and apply the character style
2. Select the last line (regardless of the number of rows in the table) and apply the character style
3. apply the character style to specific columns (with theexception of the cells of two albums)
Thank you!
Hello
Change this line:
table.columns[a].cells.itemByRange(2,-1).texts.everyItem().appliedCharacterStyle = "chart orange";
for the first 2 rows in each column
Jarek
-
How to remove duplicate Oracle lines and retain the last rows in double
Hello
I have millions of records in the table. Some values / duplicate rows are inserted into it.
I want to just delete the duplicate lines but I also want to keep the last duplicate line.
For example if a record is found three times, I want to delete the first and second record and keep
the third is to say the last inserted a.
Concerning
Valérie SinghHello
PLS, try the commond...!
1. delete from
a where rowid<(select max(rowid) from b where a.ID = b.ID (or perticular column name). OR 2. delete from a where rowid>(select min(rowid) from b where a.ID = b.ID (or perticular column name). for example emp table a.empno=b.empno; * If you are satisfied with this answer make as correct
* If you're ok withi this answer helpful alsoConcerning
KPR -
the break line and enter the tank codes
Hello
I'm working on an application that the user will be able to change the words in the text entry fields. I loaded a file txt for example like this:
"
| Light | LY | rank | light | LY | rank |
| O ' er. the | Glas | Sy | waves | We | go!
| Smooth | LY | glide | smooth | LY | glide |
| On | the | TR | ready | tide. |||
"
I let people change the words and save it again txt file. Pipes divides syllables. After customization of user text I would like to have the text in the same format as the original, and it works fine. The thing is that I don't know how to deal with line breaks and enter the channels. (Sent to sript php to write to the file) output txt file is something like this:
"
| Light | LY | rank | light | LY | rank | O ' er. the | Glas | Sy | waves | We | go! Smooth | LY | glide | smooth | LY | glide | On | the | TR | ready | tide. |||
"
In the txt output file, I lose all the data line break. But if I copy this content txt file doc, all data on formatting of line break will be there.
I tried to browse the output string characters and I found that charcodes 10 and 13 are in place, but not displayed in a txt file.
At this point, I would like to replace line breaks with # custom mark for example. I tried this:
var charcode:uint = 10;
var char = string.fromCharCode(0)) (charcode);
var nouvelleChaine = _newLyrics.replace (char, ' #');
But he replaced only the first char to a string.
How could I use regexp with charcodes?
How is - 10 and 13 tank appears in tracing instructions and is actually in the string but not in corectlly in a txt file format?
Any ideas?
a line break is \n and a carriage return is \r. (and, if you need a tab, \t).
-
I have data to the basic generic text file format that must be converted into Excel spreadsheet format. The data are much longer than 65536 rows and in my code, I was not able to find a way to see the data in the next column. Currently, the conversion is done manually and generates an Excel file which has a total of 30-40 complete columns of data. Any suggestions would be greatly appreciated.
Thank you
Darrick
Here is a possible solution to the (potential) problem. Convert an array of strings and erase the data before writing to the file
-
line and force does not not in EXE
Good evening
I'm using LabVIEW 8.21 and build an executable from my screws. In doing so, I seem to get intermittent service in the range and Coerce, as behavior noted below:
I'm trying to look at a chart and keep the items in the ranges of INCLUDED entry and get rid of all the others. To this end, I have the double black dots on the stove and the Coercefunction, but it is functioning as inclusive on the limit inferior, but exclusive on the upper limit. I copied the code on a separate VI block, and it works well here, but not in my original. As you can see, the upper front wall is not to let the value of the upper limit "0.269", where the background is it. Please note the same code on the block diagrams. These screws are embedded in an executable, in the same specifications of construction, but with different behaviors. The non-working code is a subvi dynamically called VI, but it is included in the specification.
Copy of the labour code in VI-labour code to replace does not result in operation.
What is happening here, or that I'm missing?
Thank you
Tim
How numbers are generated? Are make sure that it is exactement.269 or the value actually dating more than decimals are rounded to one You have the same problem with other values for the Max and Min.
I wonder if the problem is due to the inherent inaccuracy of a computer trying to represent certain numbers. Essentially error due to try to make accurate comparisons on the doubles.
-
How can I change the lines and save the changes so that they survive by e-mail?
I created a PDF from a png file and various tools to edit the pdf file as in the text box, add rows, etc.. After I have saved and re-opened the case I have one is no longer able to make changes to the lines, polygons, etc. Also, when I send the file to the text and lines disappear. Help
Hi blaker52005242,
Seems to be a specific problem of files. Try to re-create the PDF file & try it.
KB doc. using Acrobat help. Edit PDF files
Kind regards
Nicos -
How a TableView can iterate over the lines and get the cells?
I need to iterate over all rows in a TableView without using events. I would like to get the total number of lines, TableRow and a cell of a TableColumn specified in the TableRow.
Something like this:
Is this possible?for(TableRow tableRow: tableView.getRows()){ Cell cell = tableRow.getColumn(4).getCell(); // do something to the cell }
Published by: Conzar on May 19, 2013 23:18However, the problem with the checkbox has been resolved so I don't need to iterate over the lines longer.
Yes, don't use do not research to manage this is a much better solution, I just gave my search for a solution based on because you asked an iterative solution.
Below (research) code produces no output.
It works for me, I've included an example of executable, so you can try it.
My guess is that you are not taking into account the fact that the research is just a glimpse of the cells of the table at a time in time.
If you do a search for cell before show you the table on a stage, he's not coming back what it is because the cells are generated only on an as needed basis, and there is no need to generate all the cells before displaying the table on a stage.I get the following output on Win7 Java8b89:
NumberedTableViewSample$2$1@344fe46[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@44187690[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@34618adc[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@61eb7609[styleClass=cell indexed-cell table-cell table-column] NumberedTableViewSample$2$1@50b006a1[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@307d4153[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@89b7483[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@70ce61fd[styleClass=cell indexed-cell table-cell table-column] NumberedTableViewSample$2$1@178969ad[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@e3149ea[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@3683d879[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@589e421f[styleClass=cell indexed-cell table-cell table-column] NumberedTableViewSample$2$1@7e26215b[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@69d59720[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@1ad26ff1[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@32b058e4[styleClass=cell indexed-cell table-cell table-column] NumberedTableViewSample$2$1@582e254[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@261c4ebd[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@2cb9cfb[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@63c6fe00[styleClass=cell indexed-cell table-cell table-column] NumberedTableViewSample$2$1@16a98443[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@58247401[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@34dc3da4[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@78a62ea[styleClass=cell indexed-cell table-cell table-column] NumberedTableViewSample$2$1@29e0032e[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@1781c971[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@18b2e479[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@4801295b[styleClass=cell indexed-cell table-cell table-column] NumberedTableViewSample$2$1@19e4c622[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@6a766d41[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@572aed5d[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@3bdf71a4[styleClass=cell indexed-cell table-cell table-column] NumberedTableViewSample$2$1@524c48c7[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@47b5a3ea[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@6ef8b38b[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@7fd2ee72[styleClass=cell indexed-cell table-cell table-column] NumberedTableViewSample$2$1@4994195c[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@49620450[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@246d8751[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@17e90472[styleClass=cell indexed-cell table-cell table-column] NumberedTableViewSample$2$1@def00[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@d1aa50a[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@2a7a58ba[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@2675cbd1[styleClass=cell indexed-cell table-cell table-column] NumberedTableViewSample$2$1@1c06ee08[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@1685718d[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@6ba1936c[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@61ef15e5[styleClass=cell indexed-cell table-cell table-column] NumberedTableViewSample$2$1@6b2ace30[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@3c4d17c7[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@1c3c9aad[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@27eadfe[styleClass=cell indexed-cell table-cell table-column] NumberedTableViewSample$2$1@3f83a064[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@579615f1[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@52a9271b[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@1d221557[styleClass=cell indexed-cell table-cell table-column] NumberedTableViewSample$2$1@18947d9e[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@537eab32[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@687cc257[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@3d524978[styleClass=cell indexed-cell table-cell table-column] NumberedTableViewSample$2$1@44554375[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@22f89594[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@1f891aaf[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@bafcb2f[styleClass=cell indexed-cell table-cell table-column] NumberedTableViewSample$2$1@7ddeea8c[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@26023325[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@4b14700f[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@89eb58[styleClass=cell indexed-cell table-cell table-column] NumberedTableViewSample$2$1@6a55a4a6[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@7d95454d[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@375592eb[styleClass=cell indexed-cell table-cell table-column] TableColumn$1$1@7add3f35[styleClass=cell indexed-cell table-cell table-column]
TestApp:
import javafx.application.Application; import javafx.beans.property.ReadOnlyObjectWrapper; import javafx.beans.property.SimpleStringProperty; import javafx.beans.value.ObservableValue; import javafx.collections.FXCollections; import javafx.collections.ObservableList; import javafx.geometry.Insets; import javafx.scene.Group; import javafx.scene.Node; import javafx.scene.Scene; import javafx.scene.control.Label; import javafx.scene.control.TableCell; import javafx.scene.control.TableColumn; import javafx.scene.control.TableColumn.CellDataFeatures; import javafx.scene.control.TableView; import javafx.scene.control.cell.PropertyValueFactory; import javafx.scene.layout.VBox; import javafx.scene.text.Font; import javafx.stage.Stage; import javafx.util.Callback; public class NumberedTableViewSample extends Application { private TableView
table = new TableView<>(); private final ObservableList data = FXCollections.observableArrayList( new Person("Jacob", "Smith", "[email protected]"), new Person("Isabella", "Johnson", "[email protected]"), new Person("Ethan", "Williams", "[email protected]"), new Person("Emma", "Jones", "[email protected]"), new Person("Michael", "Brown", "[email protected]") ); public static void main(String[] args) { launch(args); } @Override public void start(Stage stage) { Scene scene = new Scene(new Group()); stage.setTitle("Table View Sample"); stage.setWidth(470); stage.setHeight(500); final Label label = new Label("Address Book"); label.setFont(new Font("Arial", 20)); table.setEditable(true); TableColumn numberCol = new TableColumn("#"); numberCol.setMinWidth(20); numberCol.setCellValueFactory(new Callback , ObservableValue >() { @Override public ObservableValue call(CellDataFeatures p) { return new ReadOnlyObjectWrapper(p.getValue()); } }); numberCol.setCellFactory(new Callback , TableCell >() { @Override public TableCell call(TableColumn param) { return new TableCell () { @Override protected void updateItem(Person item, boolean empty) { super.updateItem(item, empty); if (this.getTableRow() != null && item != null) { setText(this.getTableRow().getIndex()+""); } else { setText(null); } } }; } }); numberCol.setSortable(false); TableColumn firstNameCol = new TableColumn("First Name"); firstNameCol.setMinWidth(100); firstNameCol.setCellValueFactory( new PropertyValueFactory ("firstName")); TableColumn lastNameCol = new TableColumn("Last Name"); lastNameCol.setMinWidth(100); lastNameCol.setCellValueFactory( new PropertyValueFactory ("lastName")); TableColumn emailCol = new TableColumn("Email"); emailCol.setMinWidth(200); emailCol.setCellValueFactory( new PropertyValueFactory ("email")); table.setItems(data); table.getColumns().addAll(numberCol, firstNameCol, lastNameCol, emailCol); final VBox vbox = new VBox(); vbox.setSpacing(5); vbox.setPadding(new Insets(10, 0, 0, 10)); vbox.getChildren().addAll(label, table); // this lookup set won't print anything as no cells have been generated. for (Node r: table.lookupAll(".table-row-cell")){ for (Node c: r.lookupAll(".table-cell")){ System.out.println(c); } } ((Group) scene.getRoot()).getChildren().addAll(vbox); stage.setScene(scene); stage.show(); // now the table has been initially rendered and it's initial set of cells generated, // the cells can be looked up. for (Node r: table.lookupAll(".table-row-cell")){ for (Node c: r.lookupAll(".table-cell")){ System.out.println(c); } } } public static class Person { private final SimpleStringProperty firstName; private final SimpleStringProperty lastName; private final SimpleStringProperty email; private Person(String fName, String lName, String email) { this.firstName = new SimpleStringProperty(fName); this.lastName = new SimpleStringProperty(lName); this.email = new SimpleStringProperty(email); } public String getFirstName() { return firstName.get(); } public void setFirstName(String fName) { firstName.set(fName); } public String getLastName() { return lastName.get(); } public void setLastName(String fName) { lastName.set(fName); } public String getEmail() { return email.get(); } public void setEmail(String fName) { email.set(fName); } } } -
Help - Add line and remove the line does not!
Not able to understand why the button "Add and Remove row" do not work.
Thanks in advance
Hello
To remove the specified line, use the function
Table1._Row1.removeInstance (IND);
where ind is the index of the line.
You should put the button Delete in each row of the table and write onClic script:
Table1._Row1.removeInstance (this.parent.index);
BR,
Paul Butenko
-
im running windows 7 64 bit and whenever an update starts to install and download it gets to the end and then will restart my computer and fail to complete the update.
I have since then disabled the automatic update just if I can use my computer without it restarts itself.
the following updates fail.
KB982214
KB2284742
KB981852
KB977074
KB982670
Not sure why it does this or how remedy as im im am not as I'm not as computer like others, an explanation in simple terms would be helpful.
You receive errors related to updates?
- Open Windows Update by clicking the Start button, all programs and then click Windows Update.
- In the left pane, click view update history.
- Find an update for Windows that has failed to install, and then double-click the update to view more information.
Updates that have failed to install will display failed under status, next to the name of update. - In the Windows Update dialog box, next to the details of the error, review the error code for the update has failed.
Follow the links in the Windows Update dialog box under more information or help and Support to resolve the problem, then try to reinstall updates by using Windows Update in Control Panel or by mail with the error code and maybe someone may be able to help others.
FYI
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updatesOpen the Windows Update troubleshooting tool
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-TroubleshooterHarold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.
Maybe you are looking for
-
HP 2000: administrator password
I have haveforgotten administrator password. the disabled system code is 66210985. could you help me please Thank you
-
The phone dialer application will not display buttons.
Hello! When I enter app phone and press the key on the keyboard, I don't get the numeric keypad.
-
Single precision Float (SGL) does not not according to the IEEE754
I can correctly convert the hexadecimal to the SGL of entry. However it does not always during the conversion of this return to a SGL. I tried with 12.961126 and it works very well on both sides. But 0.2556 does not work on the way back. It gives 0.
-
HP Envy Beats: Enter the password administrator or power on password
I have the problem of power on password startup. System disabled [59179008] What is the password?
-
Aspire 7540-1284 stop down. Work is to put and the blue lights work but it just lets me know the Hd is there but gets then quiet - nothing shows up on the screen. He is 5 years old and I just reinstalled Win 7 Pro this week. I removed the battery.