line on copies ran through the document feeder

Similar Questions

• HP Officejet Pro 8600 Premium - black line on pages that pass through the document feeder

  Hello! I have a HP Officejet Pro 8600 Premium. Any time that I scan, fax or copy via the document feeder a black line appears on the document created. Anyone know how to fix this?

  Thank you in advance,

  Lynn

  Hello Lynn_Fritschi.

  I see that you encounter errors of quality on your prints when you use the Officejet Pro 8600.

  Here are two links that should be useful for you. The first is to support your product page and the second is a document that explains errors output quality and the ways to solve them.

  HP Officejet Pro 8600 Support

  Vertical stripes, lines or streaks on Copies, faxes or scan

  Please let me know if they help you.

  -Chauntain

• HP Envy 7640: When copying using the document feeder

  When I copy in black ink by using the document feeder there is a vertical line either on the left or right side of the copy. It ranges from which side. I cleaned the scanner glass. There is no line if I put the paper on the scanner glass instead of using the document feeder.

  Hello and welcome to the HP support community!

  Lift the tray and look at the end of the width of the scanner glass.  (Even on the side of the paper feeds through).

  You will find a small slit of a window that is the same width as the window of flat glass.  Generally, you will find a piece of paper or dirt in the exact spot you see the line appear!

  Use a can of compressed air, or gently move away with a soft brush.

  I hope this will fix the problem!

  WyreNut

• HP Officejet J5780: Stripe yellow towards the bottom of the page when you use the document feeder

  When using the document feeder copy has a yellow stripe down page @21/8 "from the left margin. NO problem when using the tray.

  Hi @GlennG1 and welcome to the Forums of HP!

  I see that you have lines in the ADF.  I would like to help!

  I recommend to remove the ink cartridges and perform a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I also recommend this document:

  Vertical stripes, lines or streaks on Copies, faxes or scan

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• OfficeJet Pro 8610: Cannot scan from the document feeder

  I'm unable to scan a document using the ADF.  This has never been a problem until I recently updated my OS from Windows 7 to WIndows 10.  Nothing I found online seems to solve my particular problem.  My printer is connected to my Lenovo ThinkPad W520 computer by USB, this is what I've learned so far:

  I can print without problem.

  I can copy a document from the Board without any problems.

  I am able to copy a document using the charger, so the charger seems to be working.

  I am able to scan a document from the tray, then the scan function also seems to work.

  I checked the updates and the printer indicates that the firmware and software are up-to-date.

  What can I do to once again allow me to scan a document from the document feeder?  Your help would be much appreciated.

  Yes, under "Source", I got "Use Document Feeder so burdened" and I got the beep signaling that the document is loaded in the feeder.  So, it wasn't the problem, but I do it thanks for trying to help out.

  Fortunately, I finally found a solution, although it took a job.  I have reset the printer to its defaults, uninstalled the printer (and its drivers) from my computer, downloaded the latest HP drivers (even if the printer had stated that he was "aware" before all this effort) and reinstalled the printer from scratch.  A lot of work, but the printer works now as it did before my upgrade to Windows 10.

  While I'm not a "techie" and do not really understand why things work the way they do, I hope that my efforts may provide ideas for others who may have similar problems after upgrading to Windows 10.

• Why hangs Arcobat DC Pro on page 2, when scanning a document via the document feeder?

  Why plant Arcobat DC Pro on page 2, when scanning a document via the document feeder?

  I m using an OS X 10.10.4 system and a HP LASERJET PRO 200 COLOR MFP M276.

  Before the latest updates, it was no problem to create a PDF file from a multipage documents in the document feeder, but not she scann process stops at the second page. When I use the Scanner directly from the system I ve no problem and I can save documents in a PDF document. I reinstalled Acrboat DC but no effect. The Scanner still works in the part of the system, but not with Acrobat...

  Someone at - it an idea?

  Thorben

  Hi, Rave,

  the problem occurs for the latest updates. I have now I reinstalled it Acrobat DC and scanner completely.  Now everything works again and I can create PDFs directly from the scanner as before. Boredom, it is then that your work you don t you want to reinstall everything... also it took a lot of time to find the problem and finally to find support in the Adobe support "labyrinth." Now, I disable the cloud customer and work with the system running.

  Thank you for your answer!

  Best regards

  Thorben

• HP Officejet 4632 All in One – scanning with a vertical line through the document.

  Just bought the machine less than a month ago.  Faxes and prints fine and until last week was the sweep for our laptops beautifully... but now is scanning with a dark vertical line up and down the sheet about 1/3 in the document.  What is the cause and how can I "fix" it?

  Any suggestions?

  Thank you

  Hi Rohi63.

  I understand that you have a 4632 Officejet which becomes a vertical line what it is scanned. I'm sorry to hear that, but I'll do my best to help you.

  This seems not only to be the case when using the automatic document feeder, or the glass flat?

  Usually something like this is caused because there is something on the glass. If it only happens when you use the scanner, please get a lint cloth and some glass cleaner (Windex or water if nothing else is available) and wipe the entire surface of the glass for scanning. If this only happens when scanning via the charger, you will see there is a separate strip of glass on the left looking at the scan glass, and you can focus your cleaning there.

  If this does not resolve the issue please try the steps in cleaning several times, but if nothing seems to evolve, please make sure that the printer is connected directly to a wall outlet so that we know, that he has all the power it needs.

  Hope this helps, have a nice day!

• HO Officejet Pro L7680 Fax the document feeder

  The printer will be fax unique copies of the scanner bed glass, but will not fax to single or multiple pages from the automatic document feeder.  It connects, but the fax log displays "No document" as well

  Try to do a Hard Reset as described in the following link.  Click here

  You can then run fax Test.  See Page 83  Everything?

  If so, you can load an original in the ADF, see Page 30 and send a fax, see Page 70, to 1.888.473.2963 {test HP fax #}.  If the fax is sent successfully, you should receive a fax in return of Faxback Service HP.  Please give me the details on how this happens, and if you receive error messages.

• Need text box changes to reflect through the document.

  Hi all

  I'm pretty new in InDesign. I was wondering if there's some way to do master text box changes reflect through the whole document used this master page after you move the text boxes on the documents. Is this possible?

  So. Let's say that there is the block of text with the text on the master page. I decided to use this master page on a given document, but I needed to move the block of text with the text in this document. I won't be able to change the master page text?

  Right. Once ignore you it and move on the live page, change the text on the master does not affect the text on the live page.

  If you have the same frame with the same variable text appear in the same place on multiple pages, put that image on a master page is a good way to make your life easier. But if you need the same frame with the same variable text appears upwards in * different * places on many pages, there are more effective ways.

  You don't mention a version. CS3 and CS4 allow variables (Type > text Variables). You can create a custom text variable and insert this variable in your document. Change the definition of the variable and this will change all at once. I think that a custom text variable cannot be more than one line long, but the only limit to the length of the line is the length of the block of text that is.

  For more than one line, you can make your block of text in a separate document, export it to PDF and then place the PDF anywhere in your document. Edit the new document, PDF export and it will change all at once. In CS3 or CS4, you can also directly put your separate Indesign document into your working document. No necessary PDF.

  Ken

• How to make the page numbers see the v.5.6.2 Pages automatically through the document?

  MacOs 10.11.4, v5.6.2 Pages.

  How can I make Pages automatically page numbers?  I want to be able to scroll through a multipage created from a blank template document & print specific pages.  Have sought and found answers on paging, but no address my question.  JV

  Pages v5.6.2 dislike doing anything automatically. Page numbers are shown to you when you scroll through a document:

  1. Associated with each thumbnail in this display mode
  2. By inserting the page number in the header or the footer

  That's all for v5.6.2 Pages. Whenever you want to print a specific page, you will need to check the Pages: of the _____ to the _____ in the OS X Print Panel and specify the same value for each entry field to print the page in question. There is no automatic printing of selected pages in the selection of this Panel paper handling.

  Pages ' 09 v4.3 would show the current page number on a lower status bar, with or without page numbers inserted in the header of document/footers. This view could be clicked, and it would change to a text entry where we could fix the jump to page number.

  

• What is meant by a line or a slash through the ineligible cloud icon

  I've had other accounts in the past of an old pc and now my music library a lot the song with a line through the icon of cloud and the next column written in inadmissible.  What does that mean?

  Click here for more information. If possible, connect with the associated ID of Apple.

  (139389)

• LaserJet Pro 8600: Laserjet Pro 8600 Plus vertical line on copies put through food

  I read all the messages.  Seems to be a common problem.  I did cleaning and rebooting and it is now plugged directly into a wall outlet.  Still have this line.  Plan to unplug all night and give it one more try tomorrow.  If this does not work, I guess I have to try the factory reset if you could send it to me.  VERY frustrating!

  The document here can help solve the black lines to scan using the ADF on your HP Officejet Pro 8600 Plus.  From my experience this is almost always caused by a specification on the thin glass on the side left which is used for scanning using the ADF.  Cleaning of this area as described in the above document should solve the problem.  If the initial cleanup does not resolve the problem, it can help to shine a bright flashlight almost parallel to the glass.  For a line on the left side of the printed page, the place will be toward the front of the printer, if the line is on the right side of the document, it must correspond to a specification to the rear of the printer.

  Figure: Clean the ADF scanner glass Strip

• Why can't I scroll through the documents in the file of my book?

  I'm new to Framemaker. I'm working on book building. I know that once the documents that form part of a file .book I should be able to browse a document in the book of another document.  I was not able to do in my .book files. I sent the file .book to my instructor and he can, but I can't. ???  Why is anyone know? I use Framemaker 10 in Windows 7. Thanks in advance!
  

  kkm2164 wrote:

  I have tried when the FM files are open. I also tried double-clicking on a file in the book window and in the file that opens, I start scrolling at the end. I understand that initially, Frame asks you to open the next file. But it does not for me. I can only only scroll one file.

  I don't have available to test FrameMaker, but IIRC, you will need to scrill down with the arrow keys, don't hang out not through text or with the scroll bar. I'm not sure that keyboard shortcuts such as Parker and letting n p (next page) in sequence Esc works.

  HTH

  Kind regards

  Peter

  _______________________

  Peter gold

  Know-how ProServices

• OfficeJet Pro 8600: Officejet Pro 8600 leaves black lines on docs scanned when using the document feeder

  This is the second HP Officejet Pro 8600 I had - one was replaced by HP, after that the same issue arose.  I tried to clean the entire unit, but we still get a thin black line running vertically down the page.  This line is divided into sections of 1 "and 2.5" in length.  Sometimes I get the fine line and then almost a shadow line that is parallel.

  Any suggestions would be very appreciated I have scan documents to PDF format and it's hassle to put everyone on the flat for scanning.  I use the charger of the doc on a daily basis and wonder if this could have something to do with the lines.

  Thanks for any help.

  The question is a spec on thin (~ 1 "wide) glass to the left of the main bed scanner.  Clean this area as described in this document.  It can be difficult to see the affected area, a bright flashlight which is held at an angle to the glass can help find the place.  Even a very small spec on the glass can cause a black line when using the ADF.

  

• HP printer works on line printer, but not on the documents from the computer

  Desktop HP 1000 prints from online sites but ignore the lines when printing under Vista (works)

  Hi Jsinger, hope you had a great weekend!

  I recommend to remove the ink cartridges and performing a power reset the printer. Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I also recommend the continuation of the procedure described in this document on the problems of quality Print to the HP Deskjet 1000

  Please hold me!