Line string multi Split where spends the next line

Similar Questions

• Where is the next pages drop-down list?

  Next to the buttons to navigate forward or backward between pages viewed, it used to be that a menu drop-down list but this disappeared.

  This means that if I want to go back to a site I visited five pages ago I must now press the back button five times.

  It is annoying and can be a problem if one of these pages is interactive. On one occasion, it meant that I actually purchased something twice because I introduced new content of order form when you try to move backward in simple steps.

  How can I return the drop-down list?

  Make a right-click on the arrow (s) should produce what you want. You can also hold left click down for a few seconds. If you want the marker to fall back, there is a new extension-

  https://addons.Mozilla.org/en-us/Firefox/addon/backforward-dropmarker/

• Where is the alias XNET file located on a cRIO?

  I managed to delete my cRIO alias XNET .xml file. The problem is that the alias Manager does not connect to the cRIO (error BFF63101). The connection is fine - I can FTP, connection of the user interface, etc. I tried to let fall the firewall but no go. I suspect that it is related to the fact that the cRIO abruptly stopped allowing anonymous FTP.

  Rather than spend the next several hours troubleshooting a connection problem for a transfer of files of 3 seconds, I had rather just copy the xml file on manually. However I don't know where he's going. Can someone point me to the right directory on the cRIO?

  Very long story, but I finally got it working. The short version is that a few months back the cRIO suddenly would not accept anonymous FTP so I had to put a password for the account. Annoying but not too bad. But I suspect that's why XNET database alias Manager unable to connect. If I clear the INVESTIGATION period, then I got an error message. If I tried specifying "user nameassword@ipaddress" he complained it wasn't a valid IP address.

  While that fiddling around with it, suddenly I could not connect via the web. He said that the web server did not work. Then I reinstalled the web server software. I was wondering if this would allow the FTP anonymous now so I removed the password of the account. Already when I tried to do, he would say I couldn't have an account with a blank password, but this time it took. Now, I could connect with the alias Manager and it works beautifully. Alias downloaded, and my code works now. Frankly I still don't know what I did. Debugging Voodoo: try things until it works.

  In response to my own question, I still have no idea where are stored the XNET database aliases, but I think that information would not help me anyway. When you deploy a database, I think remember that LV converts into a kind of binary format.

• How to get the text to the next line of the Label

  Hello

  I am trying to write a code where when I press Enter the text in the text box appears on the next line of the label. However, each new text is get printed on the same line...

  Here is my code:

  java.applet import. *;

  import java.awt.*. *;

  java.awt.event import. *;

  public class ChatBox extends implements ActionListener Applet

  {

  TextField firstNum, secondNum, resultNum;

  Label label1;

  String str1 = "start chat".

  public ChatBox()

  {

  setLayout (new GridLayout (3, 2, 10, 15));

  setBackground (Color.cyan);

  String message;

  message = "start typing and see the magic."

  setLayout (new GridLayout (2,1,10,120)); 10, 15));

  setBackground (Color.cyan);

  firstNum = new TextField (5);

  firstNum.addActionListener (this);

  Label1 = new Label (firstNum.getText ());

  Add (Label1);

  Add (firstNum);

  }

  public void actionPerformed (ActionEvent e)

  {

  String line = System.getProperty ("line.separator");

  String message = "start typing and see the magic."

  str1 = str1 + newline + firstNum.getText ();

  firstNum.setText("");

  message = message + str1;

  Label1.SetText (str1);

  }

  }

  Is it not possible?
  Guide of nicely with another way to do it.

• How to find the words that spans end of line to the next line in pdf format?

  I use Adobe Acrobat Pro X version for our development and form maintenance. I am writing a command Acrobat JAVA script which reads through all words and run the spell check and reports the wrong words spelled in an excel sheet. Because I run this script in batch for more than 1000 PDFs - I get a lot of words together. When I looked in the PDF files all these words are good looking because it makes its appearance at the end of the right margin, and the next word is in the next line. Since there is no space between them, it was mined in one word. Where the failure.

  I have used wordf = this.getPageNthWordQuads (i, j) to get the word start and end coordinates. When I look at my values create a rectangle, and extending through the lines. I got the coordinates for the ordinary Word and which cover the two lines acoross. the coordinates are same.

  I think I'm screwed I 8000 words and not the slightest idea how to get rid of them actual misspelled words.

  Help, please. Let me know if any /method class so I give the speech will give me the end of line or I have to go to the next layer to find this split.

  the addnot is somehow marking the words using this contact information - please hellp understand me how this works. Thank you.

  for all pages

  for (var i = 0; i < this.numPages; i ++)

  {

  For all words

  PG += 1;

  numWords = this.getPageNumWords (i);

  for (j = 0; j < numWords; j ++)

  {

  get spell checking

  ckWord = spell.checkWord (this.getPageNthWord (i, j))

  If (ckWord! = null)

  {

  Jn = 0

  ml = 0

  If the misspelled word found.

  wordf = this.getPageNthWordQuads (i, j)

  swordf = wordf.toString)

  var St = swordf.split(",")

  var diffx0 = parseInt(st[0])-8

  var diffx1 = parseInt(st[1])-8

  var diffx2 = parseInt(st[2])-8

  var diffx3 = parseInt(st[3])-8

  var diffx4 = parseInt(st[4])-8

  var diffx5 = parseInt(st[5])-8

  var diffx6 = parseInt(st[6])-8

  var diffx7 = parseInt(st[7])-8

  If (bparole is csword)

  {

  Jn = 1

  }

  If (m [1]! = m [3])

  {

  ml = 1

  }

  dataLine += "\r\n writing".

  }

  on the other

  {

  ml = 2

  }

  dataLine += "\r\n"+this.documentFileName. "

  + "\t" + this.getPageNthWord (i, j)

  + "\t" + pg

  + "\t" + j

  + "\t" + ml

  + "\t" + jn

  '\t st [0]' + diffx0 + '\t m [1]' + diffx1 + '\t st [2]' + diffx2 + '\t [3] st' + diffx3

  '\t st [4]' + diffx4 + '\t st [5]' + diffx5 + '\t [6] st' + diffx6 + '\t st [7]' + diffx7

  CK = 1

  }

  }

  }

  If Acrobat is reading each part of the word and the distinct words, you have a problem.

  The way I approached it in some of my tools was to check if a word ends

  with a hyphen and if so, to check if it is the last one on the line. If the two

  conditions are met, combined with the word on the next line. It comes

  do not fool proof, of course, as there are documents with columns are another

  structural elements that prevent this from working. Better than nothing,

  Although...

  However, it is also possible that Acrobat sees both as parts of

  the same word. In this case, getPageNthWordQuads() returns several

  tables of quads. As you know, this method returns an array of arrays quad.

  He is usually alone, but in principle it could be more... Something

  to check before giving up.

• Patch playhead at the next break (yellow line)

  Hey there,

  For some reason the shortcut where your mounting clip is breaking in the story line (or the location of the playhead) has disappeared and I can't find a way to recover. It's when that yellow line appears through the next break and the clip is automatically. Thanks for any help in advance!

  I'm not. Maybe you do not use the terminology of the FCP? Maybe a screenshot or two will help you. What you do in the screenshot and what do you do?

• Summary of the results on the next line?

  In general, this kind of thing is easily obtained in Excel where you can calculate values in a column of output based on the input values. I need to do it in PL/SQL.

  
  

  I have a relatively simple question where I'm out of values (heads) and then I need to display the sum on the next line (sort of a running Total).

  Let me explain with an example:

  ID Start Date End Date column 1 column 2

  =============================================

  1 1 JANUARY 2010 TO 30 JUNE 2010 120 0

  2 1 JULY 2010 TO 31 DECEMBER 2010 200 120

  3. ON JANUARY 1, 2011 30 JUNE 2011 115 320

  4 1ST JULY 2011 31 DECEMBER 2012 300 435

  5 1 JANUARY 2013 TO 30 JUNE 2013 100 735

  As you can see that the 2 column is derived by adding the previous values in column 1 and appear on the next line.

  So for ID = 4, column 2 = 120 + 200 + 115 = 435 and ID = 5, column 2 = 120 + 200 + 115 + 300 = 735.

  Any ideas or pointers would be greatly appreciated!

  Thank you

  Hello

  That sounds like a job for the analytical SUM function:

  SELECT id, start_date, end_date, colonne_1

  SUM (colonne_1) over (ORDER BY start_date

  End_date

  ,         id

  ) - colonne_1 AS column_2

  FROM table_x

  ;

  If you would care to post CREATE TABLE and INSERT statements for your sample data, and then I could test this.

  This requires no PL/SQL, but this market be the query in PL/SQL or not.

  Don't forget that the rows in a table are not in a particular order, which determines who is the 'next' or 'previous' line in this problem?  Start_date?  End_date?  ID?  A combination of them?  Something else?

• Unnecessary words of partitioning to the next line

  Forgive my ignorance on this, but I don't see what the hell this call in order to just google for the answer.

  InDesign is to choose to partition my words on the next line when it is not needed.

  There is plenty of room at the end of the word on the line, but it is breaking upward in a syllable and move the other half to the next line and I do not understand why or how do stop.

  I don't want words broken up in my manual and I was manually spacing and put on the next line where they are unable to adapt, but I can't take it.

  

  There is enough room for the 'cal' to fit on the top line of clealy...

  If you want to not "broken words" do not forget to select all of the text and the cut of the palette (command-option-T on a Mac) paragraph

• Where along the line on a Canadian French keyboard?

  Where along the line on a Canadian French keyboard?

  Long dashes are to shift option 0 and option shift =.

  Use the keyboard Viewer to see which button does what,

  OS X El Capitan: use the keyboard Viewer

• Several e-mail addresses in 'writing' works with 'enter' key, but the "tab" key directly takes me in the subject line instead of the next address line.

  Want to key on the tab 'use' to enter several e-mail addresses (like Outlook) but 'tab' key takes me directly to the 'object' after first address auto line. But 'enter' key works fine and it takes me to the next address line. Win 7; TB 31.3.0

  Just updated to 31.4.0 and problem solved

• When you type an e-mail, when I go to the next line, it jumps two lines instead of a single line. How can I fix it?

  I was typing an email and when I would go to the next line, it will skip two lines instead of a single line. How can I fix the problem?

  I'm not sure that you understand the problem. Could include a screenshot of it just after what happens?

  If you need help to create a screenshot, please see How to make a screenshot of my problem?

  Once you have done so, attach the file to screen shot saved to your post on the forum by clicking on the button Browse... under the box to post your reply . This will help us to visualize the problem.

  Thank you!

• WordPad, cursor returns in the first start, will not move to the next line when I hit enter

  I type a line and press ENTER if I can move to the next line, but the cursor jumps back to the first word I typed and I can't move to the next line

  Hello

   
  -You are aware of any changes made on the computer before this problem?
  -Respect the limit with the Wordpad?
  -Work on a laptop or desktop?

  Follow the steps mentioned below and check if the problem persists.

  System File Checker Scan (Scan SFC): Ihelp in the digitization of all immediately protected system files and it allows you to know the system files corrupted on your computer.

  (a) click on Start

  (b) choose run and type CMD

  (c) type sfc / Scannow

  For reference:

  http://support.Microsoft.com/kb/310747

  Response with more information to help you further.

• SPA942 flipping to the next line

  I install several SPA942s on a SPA9000 PBX to our Church.  The SPA9000 is connected to a SPA400 with 4 incoming lines.  Each phone has an extension with the same extension showing all the appearance of the line.  I expect that when a line is busy with a call, the next appearance of line would be ringing departure time of the next incoming call but rather the first appearance of the line starts flashing and you need to put the current call on hold to answer the next call.  I'm doing something wrong?

  Thanks again and I hope for everyone to announce there was a beautiful day.

  During a trip.

• The use of objects multi-state for the next stage of the course 9

  In my old clumsy e-Learning authoring tool, I could create a slide with several steps. You would click the button Next to display text and graphics.  When you get to the last step, the next step button disappears, so that you know that you have completed. How can I make this work with multi-state Cap 9 objects?  I created an object with 3 States multi-state. I created a button with an action go to Next State.  It is fine until you get to the last State.  If you click the button again, it starts again with the first State.

  Yes, I can create several buttons. But I really just want a button called next step which disappears after posting the last State.  The user would know that she had displayed all the steps.

  Any suggestions are welcome.  Thank you.

  Jeanne M

  Here is a sample script:

  

  This has been implemented for 6 States (for a container of text, the Normal State is an empty form).

  There are 2 user variables:

  • v_counter has a default value of 0
  • v_max is the number of States, you can replace it with the literal '6' or you need to

  The first decision "done" check if the counter reaches the maximum value (v_max). If this is the case all States should have been disclosed, and it should end the loop. That's why this decision will disable the button used to change States (SB_StateTrigger) and here also to change its status to an invisible state (AfterLoop). Upon return to the slide, the State will be back to Normal (visible), and simply activate the button again. You can replace this with a simple action to hide as well if you want.

  If the first decision is not true, there are still reports to be shown and the counter is incremented.

  All 6 other decisions are similar (I collapsed 2 of them): they will test the value of the counter and show the associated State. I used to state3 on a common standard. This makes it possible to use exactly the same advanced also action if the total number of States is less than 6. Simply change the value of v_max.

• I upgraded to 10 window.  She went and worked fine the next morning, then there haywire.  Not only when I right click on a picture to choose 'open in Photoshop 15 CC' is no longer on the list of choices. Where is that going?  I can go to the bridge and go

  I have upgraded to Windows 10 and all is well.  The next morning, it worked well, and then in the afternoon, when I would right click which would bring a window with my choice of app 'Photoshop 15 CC' is no longer on this list.  Where at - it go?  How can I get it back.  I can still go to the bridge, find the picture, click and the photo will be opened for editing.  But sometimes I want to just click on a photo quickly and change. Now I have to go to the bridge, find the photo, click on and it will be opened in Photoshop and I can change.  What happened, and I would like to be able to open a single photo quickly by right-clicking and choosing Photoshop.  As I said, this option is more on the list.

  Another problem is that when I open Bridge I get a window said msg / asking me to clear the cache of thumbnails in the preferences.  I did, but I still get the msg.everytime I open the bridge.  I did this several times.  So, I don't know whether or not the cache is purged.  What is the problem.  BTW, this happened before that I've upgraded to Windows 10 of 8.1.

  Hi Jdd,

  Please go to the following location on your computer C:\Program Files\Adobe\Adobe Photoshop CC 2015 and rename Photoshop.exe Photoshop CC 2015.exe

  Once that is done, then please go ahead and right-click on the image and select Photoshop app to browse and you should be able to do as an option.

  For the bridge, I suggest you to reset the preferences of the bridge once: Troubleshooting Adobe Bridge for errors and freezes

  Let me know if it helps.

  Kind regards

  Tanuj