Link inside the declaration of nat in outermost interface ERROR
Hi all
I'm having a problem with my PIX501 w / "Cisco PIX Firewall Version 6.3 (4)", when ordering I get this caveat, is that normal? because it works perfectly fine in version 7.2 (2)...
THE ERROR:
PIX1 (config) # nat (outside) 1 222.127.244.52 255.255.255.252
WARNING: Link inside the nat in outermost interface declaration.
WARNING: Keyword 'outside' is probably missing.
REFERENCE:
# Sh nameif PIX1
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
In addition,
Here is information on the 'outside' of the order PIX 6.3 setting
outdoors |
If this interface is on a lower security interface that you identify by the corresponding overall statement, you must enter on the outside. This feature is called outside NAT or bidirectional NAT. Note from firewall PIX 6.3.2 source translation is performed before the translation of destination. For this reason, if the political source NAT allows the connection, the xlate will create, even if the traffic is denied by the policy of destination. |
Source:
http://www.Cisco.com/en/us/docs/security/PIX/pix63/command/reference/Mr.html#wp1032129
Don't forget to mark the answer as the correct answer or useful rate answers
-Jouni
Tags: Cisco Security
Similar Questions
-
Access values inside the declarative part uploading
HIE
I created a declarative component in 11g. I exhibited an attribute counter in my computer.
So I can get and set this value on a label in my component as #{attrs.counter}
The questions is to say I have a requirement to change the value of the counter based on logic and then post it so how to do this?
I have exposed a java class during the creation of the declarative component but could not find how to read what #{attrs.counter} inside this java class.
VikVik,
Maybe the [blog of Frank Nimphius | http://thepeninsulasedge.com/frank_nimphius/2008/06/26/how-to-access-attributes-of-a-declarative-component-from-a-managed-bean/] helpTimo
-
Linked server: the provider OLE DB 'MSDAORA' reported an error
I have a problems with a linked server to Oracle...
Initially, the server running SQL Servre 2000 and Oracle8i and the linked server works well...
But after that the it Department installs an Oracle 11 g Client on the server...
When I run my query open in SQL Server, I get an error message
[OLE/DB provider returned message: Oracle error, but the error message could not be found from Oracle.]
OLE DB error trace [provider OLE/DB 'MSDAORA' IDBInitialize::Initialize returned 0x80004005:].
MSG 7399, level 16, State 1, line 1
The provider OLE DB 'MSDAORA' reported an error.
Hope you guys can help me, thanks.
Hello
What is the version of the database used for related serere? Is Oracle 8i? Please confirm.
If the database is 8i and customer Oracle 11 GR 2, these versions are not compatible.
After you install Client Oracle 11 g, you saved the OLEDB driver.
Restart the SQL Server, after installing the Oracle Client and then create the server bound.
Thanks and greetings
Vincent
-
Click on the link inside the non-Focus field
Hi all
I use an ActiveRichTextField non-focusable because the field is part of a larger container making screenshots click on itself - not the children. This was done to make it easier for the user to scroll up and down on a list of text fields (do not have to move the focus to a line-of-text database).
Question:
My customer wants to activate by clicking on hyperlink. This is done natively by the ActiveRichTextField, but it cannot be activated because the emphasis is disabled.
Question:
Someone has any idea how to reconcile the conflicting requirements?
(a) the ActiveRichTextField should not be focusable on a baseline of text (if it is wrapped, of course)
(b) by clicking on the hyperlink should open the browser, etc.
Thank you.
You can get the x / y position of the textfield, but translate the active regions in x / there would be rather difficult (if possible at all).
I just looked at the API, but I don't see how you can extract the links (or information about them) as the analysis is done in the background.You can analyze the text yourself with regular expressions to detect hyperlinks and offer them in a context menu.
(e.g. http://www.regexguru.com/2008/11/detecting-urls-in-a-block-of-text/ )I usually change my paradigma UI if it turns out that a usecase I need is not taken in charge, but it is sometimes easier to patch something on.
Basically, your decision: change the user interface in order to support this usecase, or something (like the context menu) on this patch.
I would say to list the options see, then speak to the customer what he likes.
-
Links inside the flash form buttons
Is it possible to place buttons inside a flash of and use these buttons to leave the form and go to another page? I guess using GetURL would be used, but I failed to run. I also thought to make each button a button to send with a CF variable as value and then pass this value to the 'action' of the form, but again... no luck. I think I am barking the wrong branch of the tree so to speak.Thank you scarecrow. Which lead me to what I was looking for, use the syntax appropriate for the form element.
-
Command link inside the table to an external site in the pop-up window
Hello
I am currently having a command to bind inside a table that sits on the table id. I know that if I'm in control of the landing page, I use setCurrentRowKeyValue. However, I have no control of the external Web site. So I can't add it in my faces-config file. XML? I tried to put a GoLink and a GoButton but I get the illegality according to fragment error, when I put my destination URL in. An example of the format of the URL is:
http://www.BBC.co.UK/radio? & Music = # {rank. PrimaryKey} & adf = 123
Where I add in #{place. PrimaryKey} which is the Id of the line. I would like to have the new page open in a pop-up window, if possible.
I don't know if this can be done in the bean to support or if my approach is right?
Thank you very much
Stevesomething like...
Kind regards
Neeraj -
The details are in issue
Are you clicking on the links in an external program?
Try:
-
Where is the link to the discussion?
I have this page bookmarked for a forum (Flash CC):
http://forums.Adobe.com/community/Flash/flash_general
How to a list of all the discussions in the forum? I can't see a link on the page.
By trial and error, I found that it is the URL for discussions:
http://forums.Adobe.com/community/Flash/flash_actionscript3?view=discussions
Bottom right widget 'A trend of issues', click on the blue "more >"link. "
-
Cannot ping inside the vpn client hosts. It's a NAT problem
Hello everyone, I'm running into what seems to be a cause of exclusion with an IOS IPSEC VPN NAT/nat. I can connect to the VPN with cisco IPSEC VPN client, and I am able to authenticate. Once I have authenticate, I'm not able to reach one of the guests inside. Below is my relevant config. Any help would be greatly appreciated.
AAA new-model
!
!
AAA authentication login default local
radius of group AAA authentication login userauthen
AAA authorization exec default local
AAA authorization groupauthor LAN
crypto ISAKMP policy 3
BA 3des
preshared authentication
Group 2
!
ISAKMP crypto client configuration group businessVPN
key xxxxxx
DNS 192.168.10.2
business.local field
pool vpnpool
ACL 108
Crypto isakmp VPNclient profile
businessVPN group identity match
client authentication list userauthen
ISAKMP authorization list groupauthor
client configuration address respond
!
!
Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
!
Crypto-map dynamic dynmap 10
Set transform-set RIGHT
Define VPNclient isakmp-profile
market arriere-route
!
!
10 ipsec-isakmp crypto map clientmap Dynamics dynmap
interface Loopback0
IP 10.1.10.2 255.255.255.252
no ip redirection
no ip unreachable
no ip proxy-arp
IP virtual-reassembly
!
Null0 interface
no ip unreachable
!
interface FastEthernet0/0
IP 111.111.111.138 255.255.255.252
IP access-group outside_in in
no ip redirection
no ip unreachable
no ip proxy-arp
NAT outside IP
inspect the outgoing IP outside
IP virtual-reassembly
automatic duplex
automatic speed
clientmap card crypto
!
the integrated-Service-Engine0/0 interface
description Locator is initialized with default IMAP group
IP unnumbered Loopback0
no ip redirection
no ip unreachable
no ip proxy-arp
IP virtual-reassembly
ip address of service-module 10.1.10.1 255.255.255.252
Service-module ip default gateway - 10.1.10.2
interface BVI1
IP 192.168.10.1 255.255.255.0
no ip redirection
no ip unreachable
no ip proxy-arp
IP nat inside
IP virtual-reassembly
IP nat inside source static tcp 192.168.10.2 25 interface FastEthernet0/0 25
IP nat inside source static tcp 192.168.10.2 443 interface FastEthernet0/0 443
IP nat inside source static tcp 192.168.10.2 3389 interface FastEthernet0/0 3389
IP nat inside source map route nat interface FastEthernet0/0 overload
nat extended IP access list
deny ip 192.168.10.0 0.0.0.255 192.168.109.0 0.0.0.255
refuse the 10.1.1.0 ip 0.0.0.255 192.168.109.0 0.0.0.255
ip licensing 10.1.1.0 0.0.0.255 any
permit ip 192.168.10.0 0.0.0.255 any
sheep extended IP access list
permit ip 192.168.10.0 0.0.0.255 192.168.109.0 0.0.0.255
ip permit 10.1.10.0 0.0.0.255 192.168.109.0 0.0.0.255
ip licensing 10.1.1.0 0.0.0.255 192.168.109.0 0.0.0.255
outside_in extended IP access list
permit tcp object-group Yes_SMTP host 111.111.111.138 eq smtp
permit any any eq 443 tcp
permit tcp 20.20.20.96 0.0.0.31 host 111.111.111.138 eq 3389
permit tcp 20.20.20.96 0.0.0.31 host 111.111.111.138 eq 22
allow any host 111.111.111.138 esp
allow any host 111.111.111.138 eq isakmp udp
allow any host 111.111.111.138 eq non500-isakmp udp
allow any host 111.111.111.138 ahp
allow accord any host 111.111.111.138
access-list 108 allow ip 192.168.109.0 0.0.0.255 192.168.10.0 0.0.0.255
access-list 108 allow ip 192.168.109.0 0.0.0.255 10.1.1.0 0.0.0.255
access-list 108 allow ip 192.168.109.0 0.0.0.255 10.1.10.0 0.0.0.255
!
!
!
!
route nat allowed 10 map
match ip address nat
1 channel ip bridge
In my view, the acl applied to customer is back. It must allow traffic from the internal network to the pool of customers.
To confirm, you can open the Cisco VPN client statistics (after login) then go in the route Details tab. We should see the networks you should be able to reach the customer. Make sure that the good ones are here.
Kind regards
-
links inside an iframe with target "_blank" open inside the iframe IOS only.
Hello
I have a simple application that has an iFrame that displays a Web site. Certain links on this Web site have target = "_blank". But on iOS only, when I click on the links in the iframe, they open inside of the iframe and not in the native browser (Safari). On Android, it of very well and opens in the native browser. And given that my application is literally just an iframe, as soon as someone clicks on 1 of these target = "_blank" links, there is no button back so they essentially stuck and have to close the application and reopen it.
What I find EXTREMELY interesting is it seems that most people have the OPPOSITE problem (go figure): cordova - why links inside an iFrame are open in safari system? - Stack Overflow (and this has been posted 4 months ago).
I'm a Noob PhoneGap, so maybe I'm missing something obvious. I use PhoneGap Build compile my app... so I can't change any of the '.m' ios files (or maybe Im confused on this subject).
- PhoneGap (iOS / Android / Windows)
- CLI - 5.2.0 (3.9.1 / 4.1.1 / 3.8.1)
Here are some details of my config.xml file:
< src = "index.html" / content >
< name of option = "phonegap-version" value = "cli - 5.2.0" / >
< access origin = "*" / >
" < allow intention href = ' http://*/* "/>
" < allow intention href = ' https://*/* "/>
< allow intention href = "Tel: *" / >
< allow intention href = "sms: *" / >
< allow intention href = "mailto:*" / >
< allow intention href = "geo: *" / >
< platform name = "android" >
< allow intention href = "market: *" / >
< / platform >
< platform name = "ios" >
< allow intention href = "itms: *" / >
< allow intention href = "itms-apps: *" / >
< / platform >
And here's my index.html
<! DOCTYPE html >
< html >
< head >
< meta charset = "utf-8" / >
< name = "format detection" meta content = "phone = no" / > "
< name meta = "msapplication-tap-featured" content = "no" / >
< name meta = "viewport" content = "scalable user = no, initial scale = 1, maximum scale = 1, minimum scale = 1, width = device-width" / > "
"< script type =" text/javascript"src="js/jquery.min.js "> < / script >
< link rel = "stylesheet" type = "text/css" href = "css/index.css" / > "
< title > law Mobile < /title >
< / head >
< body >
< div class = "app" >
< script type = "text/javascript" src = "cordova.js" > < / script >
< script type = "text/javascript" src = "js/index.js" > < / script >
< script type = "text/javascript" >
App.Initialize ();
< /script >
" < iframe id ="webview"src =" https://MyCloud.Act.com "> < / iframe ".
< / div >
< / body >
< / html >
Hi thanks for the reply!, if I have to do something else and more, simply add
because I just tried this, but have not seen a change.
Edit... turns out I needed to do a little more on my side, but I think I got it. I had to add the following code
IFRAME var = $(#webview);
{iframe.on ("Load", Function ()}
allAs var = iframe.contents () .find ("a [target = _blank]");
{allAs.on ("click", function (e)}
e.preventDefault ();
var url = this.href;
Window.Open (URL, "_SYSTEM");
});
});
-
Deep Linking and currently a Web page inside the app
Hello
Is it possible to display a webpage site inside the App from the DPS? for example, the user click on the subscription banner/Sign Up, and the app will present page e-commerce from the website owner.
Thank you
If I understand the question, you have several options. You can create a banner with a URL. Target when the user clicks on the banner, the web page opens in a browser in app. The user then click done to dismiss the browser. Another option is to make a link to a Web site in an article.
-
Please, can someone give me a link to WLS 10.0?
I can't find inside the section of archive Oracle downloads.
As of December 4, 2012, the Archives of liberation BEA has been decommissioned. Customers who are looking for a version of BEA, which is not available on the cloud of delivery of Oracle software, or OTN, please refer to the MOS Document 1071023.1 "Physical shipment request or download URL for the software support".
-
Muse in iframe page inside the iframe links
HI - hope someone can help me.
I have created a web page in Muse and uses an iframe to display on the home page of an existing Web site. Below in the big blue box, you can see the iframe to display. Note the blue area around one of the links:
When you click this link, here's what happens:
The page inside the iframe, which I don't want to happen. I'm back in Muse and selected the "open in a new window" for links, who comes here to open links in a separate tab or a new window, which will not work.
Can someone help me understand how to open links in the same parent window, but not inside the iframe? I have to change the Muse exported HTML page to make it work? I could put something inside the HEAD, on the Muse page before exporting? Any help is appreciated.
Thank you.
Hi - I found the solution. Add this to the head in the properties of the page and it works:
-
Custom button link just inside the frame of webhelp, not on the entire page
Hello
I use Robohelp 8 to create a WebHelp that I linked to a word document. Everything turned out great so far, but one of the last things I'm doing is creating a custom content and Search button that is labeled "SharePoint". I want that this button is a link to the site of our company so that when users are made with the WebHelp, they can simply click on the button and that it will take them back to SharePoint.
I created the button and made a connection, but the problem that I am running is that when they click on the button, our SharePoint site appears as part of WebHelp, not the entire page. I don't know if it's possible, but I would like users to be able to click on the button and our SharePoint site appears on the entire page instead of just inside the frame of WebHelp. Is this possible?
Thanks in advance for your help.
Hello
You want the Sharepoint page to totally replace the WebHelp output in the browser window? If so, choose the option for JavaScript and use the code below for the OnClick field:
parent. Location ='http://www.desiredsite.com'
Of course you replace your link where it says http://www.desiredsite.com.
See you soon... Rick
Useful and practical links
Wish to RoboHelp form/Bug report form
Begin to learn RoboHelp HTML 7 or 8 times now - $24.95!
-
Link to the page from inside an HTML overlay element
We develop a tool of sale using DPS and I would use an HTML overlay to help the user determine the right product for them.
Starting in the folio, the user clicks a button to launch a file HTML. At the end of a series of questions, the HTML file is a recommendation of this product is good for them.
We try to use a "Navto" link, and then take the user out of the HTML and into a particular page from the folio.
Everything works fine, until they were typing on this final link. The user gets an error message "this page cannot be opened because of an error. The error is "the URL can't be shown' (101).
We were told that it was possible. Any ideas what could be wrong?
I suggest looking here everything first:
If you are jumping from an article HTML in an article in InDesign "See the Article of News" should work.
Make sure that you are spelling the name of the article exactly as it appears in the generator of folio; capitals and everything.
Maybe you are looking for
-
TEMPRO does not work for Vista Ultimate x 64
Hello I have a Qosmio F50 - 10K and I installed Vista ultimate x 64 and the Tempro application does not work. After I installed, I left the start Tempro button checked and when I press finish it gives me this error:"internal error 2753.Toshiba.UI.con
-
Pavilion DM4 - 1173CL p.n.: upgrade to 5 GHz WiFi XH123UA
The service doc list the Intel Centrino Advanced - N WiMAX p.n.: 619997-001, as a wireless card compatible for my phone XH123UA. Is this a plug & play, simple replacement of my Broadcom p.n. origin: 593836-001 card adapter wireless or will I have to
-
Windows could not complete the format
can someone help me because can not format my USB what should I to do there at - it something I can do for my USB
-
Hi all My fiancee and I just bought an Acer A210 each and we noticed that 4.1 android is installed as the norm rather than the latest version 4.2. Our legs will get the update from 4.1 to 4.2? I saw you can download versions 4.2 ROM flashing the tab,
-
Path for the shared folder?
What is the path to the shared folder? file:///accounts/1000/shared/documents/ I am using the above, but it does not work, any ideas?