Linked clones (Windows 7 64 bit) deployining with logical scsi Bus controller.

Hello

I have typical problem with my opinion 6.0 related clones.

Every time I recompose the pools, the pools of related clones (Windows 7 64-bit) deploying with a logic of Bus SCSI controllers. I check the image of the master, is entitled controller SCSI (LSI logic). I don't understand why its happening.

Because the question virtual machine does not run.

Can help with this.

Concerning

Surya

Hello

I found the problem.  In the main image, the disk has been configured with IDE, because its deployment with logical driver. Once I changed to SCSI drives everything works fine.

Kind regards

Surya.

Tags: VMware

Similar Questions

  • I have re installed the operating system on my Dell Studio 15 for Windows Vista 32-bit. But now the network controller is not working and I can't use wireless internet

    I have re installed the operating system on my Dell Studio 15 for Windows Vista 32-bit.  But now the network controller is not working and I can't use wireless internet, but I can plug a cable ethernet in there and get online.  What can I do?

    I have reinstalled the operating system on my Dell Studio 15 for Windows Vista 32-bit.  But now the network controller is not working and I can't use wireless internet, but I can plug a cable ethernet in there and get online.  What can I do?

    Install the appropriate network device drivers and software from the Dell downloads web site for your particular model, or better yet, tag Service...

  • HP HDX Windows Vista 64 bit laptop with error 1002 of the recovery process

    Hello

    I have laptop HP HDX which had a sound problem with message of error "Could not play the test tone", tried in several ways by online suggestions and ended to reinstall the new copy with recovery disk. As part of the recovery with a reovery of HP drive, I tried to get it back and it formatted boot partiion and got this error message "error 1002 if the problem persists, please contact HP support. My laptop is out of warranty now.  I talked to HP support and they ask me to buy new drives recovery and someone in this forum mentioned that recovery disk will lift the same mistake and we would need to purchase technical support and even that has not worked for soembody after paying $ 200 to support. I am struck with recovery of the laptop now. I also tried the recovery partition revovering and gave rise to no luck.  I'm now out of warranty.

    I am really fedup with bearing on my this laptop windows vista 64 bit HP HDX laptop problems. What is your best suggestion for me to recover my windows vista now?

    Thank you.

    GK

    I ordered the drive to restore HP for $ 16 and I have no problem in my OS with this disk recovery. Recovery partition that came with my laptop had this error 1002 and he really tortured than me. It is recovered successfully with this new disc of recovery with on all issues.

    I would have saved a lot of time, would not have had any stress and restore ($16) if HP disks price had built the free bug recovery partition.

    I'll be very careful in buying HP products in the future.

    Peace out.

  • Toshiba Satelite a300 Windows 7 32 bit problem with music keys

    Hi, I just installed Windows 7 (32 bit) and I have a problem with the music keys. I can't find driver for it even on the toshiba official site. I had been looking in this and many other forums, but no answers have been good enough to solve my problem. "I've been to the installation of several ' for sure the work drivers" and nothing. It is with my Web camera - no driver. After I installed my touchpad began to be brighten up, but I still can't use the music BIOS update keys. I hope someone can help. Please :)

    Sorry for my English

    Install the Toshiba value added for the A300 (use the PVAT Win7, not the PVAT Vista).

    This site of Toshiba: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp?nav=Download

  • HP LaserJet M1217 Wireless Installation on HPG60 Windows 7 64-bit issues with no error message.

    I tried to install a new HP LaserJet M1217 with a wireless connection to my PC (HP G60 with operating system Windows 7 64-bit).  I spent many hours trying to a simple task.  I have not in all instructions and options slowly and kept my concentration without success.  I have the method wireless attempt, the method of USB, the method of attached CD-Rom and downloaded from the HP website.  Always without success.

    I followed the instructions of troubleshooting and always without success.

    I currently have a HP LaserJet P1102's wireless installed.  It works perfectly.  I have a wireless HP7280 all-in-one printer installed prior to my purchase of a new M1217.  I uninstalled the software of HP7280 before my attempt to install the new M1217.

    I don't have any type of error except the computer would stop downloading for all options except the web download procedure.  The web left me hanging with no next steps after being downloaded.

    I'm exahusted after several hours of attempted an installation.  I can get the M1217 print when it is attached to my PC via the USB port.  How can I get to print and scan wireless?

    Thanks for your suggestion.  I had already downloaded the PDF file and followed the instructions without success.

    I received a diagnosis of the HP media card and I was able to complete the installation.

  • Windows 7 64-bit incompatible with HP laserjet 1018?

    Update from Vista to Windows 7 64 bit. My HP laserjet 1018 printer has worked for awhile, but no longer works. When you print, nothing happens, except that you can see in the job printer status window that the job was created, but I disappears in a second or two. I downloaded the latest HP driver, does not help. I tried to uninstall the previous driver, but he said something as unexpected... can't do. Help, please! I need the printer!
    See you soon,.
    Hans

    Hello STHALJ,

    Thanks for posting on the Microsoft answers Forums.

    First of all, I would like to uninstall your HP laserjet printer 1018. Click here to download the latest Windows 7 drivers for your printer.
    So try and install again.

    If this does not help, please contact HP support. You can also visit the forums for discussion of HP.

    I hope this helps.

    Sincerely,
    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Windows 7 64 bit problem with raw format images

    I understand that there is a problem in the use of this raw format images in Windows 7 64 bit can cause problems resulting in the destruction of windows, and that there is an update that needs to be done to avoid this problem. I was unable to find it. Anyone know where he is hiding and what's it called? Thank you, Henry

    Hello

    Are you referring to this:

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=8802

    This is for Windows XP, try to use compatibility mode.

  • problem with the SM Bus controller driver

    Dear Sir...

    My machine is Hp Pavilion 1150ee g6

    product no.: LX309EA #ABV

    I have windows 7 professional service pack 1

    I am from Egypt

    I'have a problem the appliance cannot read usb flash memory and after I cheked my device manager, I found a problem with the driver for Sm Bus controller (kindlly see attached picture)

    so I tried to download the driver from the site sp52791

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = ar & CC = emea_middle_east & DLC = ar & sw_lang...

    But when I installed it I found a wrong message

    kindly I need your support to solve this problem

    Thank you very much for your cooperation

    Nader

    Hello:

    Try the driver directly from Intel...

    https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y & ProdId = 816 & DwnldID = 20775 & Keyword = Chipset + Installation + Utility & lang = eng

  • Games Windows vista 32 bit provided with windows vista have stop working? I have explorer 7 and worked until recently?

    I lost the original games in windows vista that came with windows vista, I installed explore 9 a month ago and it has worked fine until recently, Vista 32-bit. Home Basic

    Hi mast cocoa,.

    1. what happens when you try to play the game? You receive an error message?

    2. did you of recent changes on the computer?

    3. you are unable to find the Windows installed games on the computer?

    Check if you can find Windows games to the following location.

    1. open the Games folder by clicking on the button Start , allprograms, clicking games, and then clicking Games Explorer

    Solve game problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-game-problems

    If you find the windows games to the place mentioned above can ensure that games for Windows is activated in Windows features by using the link below.

    Where are my games?

    http://Windows.Microsoft.com/en-us/Windows-Vista/where-are-my-games

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Color Laserjet 4500 on Windows 7-64 bit > share with XP - 32 bit > need additional 32-bit Drivers

    Here is the configuration:

    Desktop: Windows 7 Professional - 64-bit with Color Laserjet 4500, connected shared, and work very well. The driver name is HP Color LaserJet 4500 PCL 5.

    Laptop: Windows XP Professional - 32-bit.

    No network problem. Laptop sees the printer, but cannot connect without the correct drivers installed additional 32 - bit on the desktop. The drivers only I could find are listed here. When I try to add under host print properties/sharing/additional drivers, none of the .inf files downloaded are accepted.

    Since Windows 7 installed a 64-bit driver perfectly well, there must be a compatible 32-bit driver cab be added to allow the XP laptop for you to connect to this printer - but I was not able to find it!

    For any help or suggestion will be greatly appreciated!

    Rob

    I got to work:

    I copied the extracted driver files (with the file updated the hpbf231i.inf) to the laptop client XP.

    I used "Add a printer" on the laptop, installed as a network printer, stressed the shared printer and when you are prompted, pointed to the file hpbf231i.inf on the laptop.

    What time, eat enemies! But it works!

    Rob

  • Windows 7 64 bit ISO with current updates

    Hello

    I'm a computer on an enterprise system administrator trying to figure out how to get current, updated to Windows 7 Enterprise 64-bit SP1 ISO.  I am building an imaging server and would like to be able to place the most recent the server image so that I don't have to run hundreds of updates Windows on my PC after installing Windows.  If it is already the answer somewhere with the Microsoft community so I'm sorry that I couldn't find my answer myself to research.  If it is then just direct me to this page please.

    Thank you!

    Business licenses are sold as Volume License and the installation image is provided by the dealer where you bought directly from Microsoft.

    Microsoft don't provide media with all integrated pre updates because this would require recompilation of the image each time a new update is issued.

    Create a new image of master with updates already built using the sysprep utility, or implement an internal update server to manage the distribution of updates Windows Server (WSUS) within your network. An overview of WSUS can be found here:

    https://TechNet.Microsoft.com/en-us/library/hh852345.aspx?f=255&MSPPError=-2147217396

    This forum is intended primarily for the consumer, enterprise level support is better covered through TechNet.

  • Install Windows 7 64 bit cleanly with OEM?

    Hello.

    I noticed that 64-bit Windows 7 OEM are much less expensive that the retail sector in the online stores like Amazon.com. Can I buy, install and use it on the application form/new hard drives? I also, upgraded hardware main every two years and I was wondering if this will affect activations in OEM.

    Thank you in advance. :)

    Yes, you can use it on a blank hard drive, but there are some license limitations that come with it. If you make significant changes to your hard drive as your motherboard, then you will be in non-compliance:

    The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

    -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

    -OEM Licenses are tied to the computer first you install and activate it on

    -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

    -OEM versions does not move directly from an older Windows operating system

    OEM licenses must be installed by professional system manufacturers. Under Microsoft's OEM license agreement, they should not be sold to end-users under any circumstances, must be preinstalled on a computer using the preinstallation OEM (OPK) before delivery to the customer and include to the at least the manufacturer contact information. They are, therefore, designed for installation only on a single computer and are not transferable, even if the original computer is no longer in use. This isn't usually a problem for users who buy a new computer, because systems that most pre-assembled systems ship with a preinstalled operating system. There are very few circumstances where Microsoft will allow the transfer of licensed OEM for a non-functional system to another, but the OEM System Builder License Agreement (SBLA), as well as the EULA (EULA) OEM contract don't contain any provision for this, it is entirely at the discretion of Microsoft, depending on the situation

    http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_for_hobbyists.aspx

    What is OEM software? :
    http://support.Microsoft.com/GP/oemsupport_1/en-GB

    Licensing FAQ:
    http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

  • Windows Vista 64-bit OS with Explorer 9 not answer again Flash Player or to allow to exploit. Was OK in the recent past

    Frustrating because the Flash worked until recently.  I don't want to pay to upgrade to solve the problem.

    See if anything here helps: http://kb2.adobe.com/cps/191/tn_19166.html

  • Package of added value and Windows Vista 64-bit on Satellite P200

    Hello, recently I changed Windows version of 32-bit to 64-bit. Everything works perfectly except PPV.

    When I try to install it, it produces an error message that says:

    ID_ERR_NOTINSTALLTVALZ_MESSAGE

    I found in some old discussions that I should update my bios, so I downloaded most recent bios, and when I tried to update, the pop-up message that I already have this version.

    I did some research and I found some drivers for the 64-bit version - [link to driver | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 152 & selProduct = 746 & selSho rtMod = null & language = 13 & selOS = 27 & selType = all & yearup load = & monthupload = & dayupload = & useDate = null & mode = al lMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = all & page = 1 & ID = 61866 & DISO = 27 & driverLanguage = 13]
    and in the statement, he said that I should
    "It's only the driver of value added package for 64-bit computers. Installation instructions: 1. unzip the zip-> 2. Right-click on the "TVALZ_O.INI" file-> 3. After a right-click on the file, choose "Install" from the context menu. »
    But when I do that there is an error message that says that this INF file selected does not support this method of installation.
    I tried to install it in safe mode, but the error is the same.

    Maybe I should put these drivers in a specific location? If Yes, where?
    Who can I install everything first? VAP installation for 32 bit, then driver for 64-bit? Or maybe the other way around?

    If someone could write me a clear instruction how step by step, I would be really grateful.

    My system: Windows Vista 64-bit Ultimate with SP1
    My Notebook: P200 series

    Best regards, Paul of the Poland.

    Hmm, I wonder about this sentence
    > I've done some research and I found some drivers for the 64 bit version

    What is your laptop model number? Have you chosen the right Toshiba VAP for the right notebook series?

    If you have chosen the correct drivers (for the right notebook series) then try to copy the extracted files in the folder of Toshiba Value Package added to programs-> Toshiba-> Toshiba Value added Package.

    Then try to run the ini file as described on the page of the European driver Toshiba.

  • Does anyone have SOF2 still run on windows 7 64 bit? __

    Here are the steps I've taken so far.

    Updated all the Nvidia drivers for my 9800 GTX +.
    Install Direct X 9 c - hoped this would help with OpenGl
    Configure the program to run as admin.
    Set the program to run in Windows XP SP2
    Set the program to run in Windows XP SP3

    When I start the program it's what I get Windows 7 64 bit
    Deal with the accident of application SOF2MP.exe
    Could not load SOF2MP.exe

    Sof2 ran when I had Vista Ultimate 64-bit.

    The game I was talking about is Soldier of Fortune 2 Double Helix soldier of fortune recovery not.

    I did the recommended settings and it help out but I can not load the game.

    I tried to install Direct x 9 c but I don.t think it worked. That's what the game initially provided with.

Maybe you are looking for

  • Connect a printer non-airprint for the Airport express

    Can I use an express train from the airport as a stand-alone wireless network to allow printing from an IOS device.  I want to connect an AirPrint not printer to the usb port on the Express with no ethernet cable is connected and so no internet and u

  • Satellite P100-275: how to start Express Media Player

    I have a computer laptop P 100-275. I'm looking for the Express Media Player. But I can, t find. Only the windows media player.I, ve used the recovery cd. But I can, t find it yet. Who can help me?Operafreak

  • HP LaserJet MFP M521dw Pro: Black object hanging in the tray paper LSJ M521 Pro

    Hello In my printer, when you remove the paper tray, it seems to be a black object/lever hanging down in the status bar. I have attached two images, where the object is marked with a red circle. I would like to know if it's supposed to be there or no

  • Unable to paste the screenshots in u MS Paint

    I can't paste the screenshots of the Internet using MS Paint - Version 6 (2007). When I use the PrSc, can't do the editing and paste or Ctrl / P options actually paste the screenshot taken out web in paint.  I was able to use it in the past... and th

  • Could not open file Windows Live thanks to save and send

    Hello I need help, send files to my windows live account directly from my Office 2010 trial software. I click on save and send, sign in to windows live and choose the file I want to send to. Then, once I click on save the program appears with an erro