Linking New Extreme old Extreme and Express. New Airport utility does not recognize old Extreme/Express

I had a linear new extreme connection (connected to the wireless model Cat5) related to the old extreme then Express (newish).

I would have put in place using airport Utility (for example) 4 years ago and has worked well.

I changed my wireless modem (formerly broken) but cannot now reconnect the old extreme and express to the extreme again.

The extreme new connects to internet just fine as long as it is in Bridge mode (does not work in DHCP/NAT mode).

My real question is the utility software Airport now seems not to recognize the Express extreme or old old to get re-connected.

The manual of Apple still shows configurations using the old utilitarian approach Airport (with each unit sitting on LHS page)

If you're still using OS X (10.5.8)... as, you enter in your profile information... then the AirPort Utility in this operating system must be able to recognize the old AirPort Extreme and Express.

However, if you have updated to a new operating system such as the Mountain Lion (10.8.x), Mavericks (10.9.x), Yosemite (10.10.x) or El Capitan (10.11.x)... and... you have more "round" or version 'dome' in the form of AirPort Extreme, and an old version of the AirPort Express A1084... so, the new version of AirPort Utility is not compatible with older airports.

So, this would help a lot if we could get clarification from your part...

(1) what operating system you're using now?  If you are not sure about this, click on the Apple icon in the upper left corner of the screen, then click on about this Mac and post back with the Version of OS X number that you see there.

(2) what version of the AirPort Extreme you may have.  Is it a 'rounder', or 'dome' in the form of version... or... The "flat" or "square" version? If you have flat or square version, the number of model of the device is required. It is on the lower part of the airport, probably integrated in the base of carpet of MOSS. The model number starts with an 'A' follow-up of four digits. Please post back this information.

(3) what version of AirPort Express you have?  Please look for the model number on the side of the Express. It is difficult to see, with grey lettering in a certain context, so you need to perhaps good lighting and glasses to discern the number of reading.  As extreme, the Express, model number starts with an 'A' followed by four digits. Please post back this information.

Once we have the information we need, we know more about how to proceed from this point.

Tags: Wireless

Similar Questions

  • Since the new update Illustrator does not recognize the graphics card to my SURFACE PRO 2 and the digitizer stylus does not work properly.

    Since the new update Illustrator does not recognize the graphics card to my SURFACE PRO 2 and the digitizer stylus does not work properly.

    Any ideas out there?
    I know the pro 2 surface is not the real model, but at least it should work fine.

    arwinq,

    You can see the system requirements, including the maps here.

    https://helpx.Adobe.com/Illustrator/system-requirements.html

    but I fear that you may be taken in this GPU issue described by butz in post #13 here:

    https://forums.Adobe.com/message/7773402#7773402

    You can try to switch between GPU and CPU by pressing Ctrl / Cmd + E, or you try disabling GPU performance by clicking on the icon of the rocket in the bar of the App, or on the top of the menu bar, deselect the box Performance GPU. You may also uncheck performance GPU in your preferences.

  • How to create a guest account? I followed the instructions and it says that it does not recognize the user!

    I followed the instructions to create a guest account and it says that it does not recognize the user's address or the password.

    Hello

    1. What is the operating system installed on the computer?

    2. are you trying to create or attempt to activate the guest account?

    3. How have you tried to create the guest account?

    4. What is the exact error you get when you try to create the guest account?

    Perform the steps in the articles to create a guest account and check if the problem is solved or not.

    Turn the guest account on or off (Windows 7)

    Turn the guest account on or off (Windows Vista)

    Hope that helps.

  • I got Windows 7 and when I plug it does not recognize a sandisk to my pc USB flash drive

    I got Windows 7 and when I plug it it does not recognize a drive flash USB San-disk on my PC, all the other brands are. Can someone help me?.

    Hi Martin,.

    Thanks for posting your question in the Microsoft Community forums.

    I see from the description of the problem, that a USB SanDisk flash drive is not detected on the computer.

    I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

    To resolve the problem with the connection of a USB flash drive, I need more information:

    1 have you tried plugging the machine into the other USB Ports?
    2. did you of recent changes on the computer before this problem?

    Method 1:
    I suggest you to connect the USB device to another computer and check if it gets detected. If this is not the case, this could be a problem with the USB device.

    Method 2:
    If the USB device is detected on another computer, you can run the hardware and devices Troubleshooter and check if it helps.

    Hardware devices do not work or are not detected in Windows
    Method 3:
    I suggest you try the procedure described in the article and see if it helps.

    Check the link for more information.

    Let us know the status of the issue after you perform the troubleshooting steps. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.
  • Qosmio G30-154 and 155 - image Enhancement Utility does not work

    I read the

    wire https://forums.computers.toshiba-europe.com/forums//thread.jspa?threadID=21006
    as I have such a problem.

    I installed Picture Enhancement Utility and when I started the application I got an error

    * This application does not work on the current version of BIOS system * and stored program settings are not saved.

    My BIOS version is 3, 90 - WIN
    Y at - it the new vesion of work of image Enhancement Utility?

    Image Enhancement Utility came out for the Qosmio G20 series.
    For Qosmio G30 such utility is not out!

    I guess this is the reason why you get the error message: + "this application does not work on the current version of the system BIOS +.

  • downloaded and installed the reader, but does not recognize the key on the back of the card to complete the installation

    downloaded and installed students and teachers edition of acrobat Pro DC, does not complete the installation.  Have a trial version expired always on systems, help

    Hi cherylc10083122,

    Make sure you use the correct serial key, please check using this link, find the serial number of your product Adobe quickly.

    Kind regards

    Nicos

  • Satellite M40X-286: energy saving and the E - key utility does not work on Vista

    First of all, sorry for my bad English.

    I managed to install Windows Vista Ultimate 32-bit on my Satellite M40X-286. Everything works, except for the energy saving and the E - key utility. I tried the added value of packages of other TOSHIBA models, but they all give an error message during the installation. Is there a solution for this problem?

    Now I can't change the speed of the processor and the brightness of my screen, and I can't even adjust these settings in a power mode. The only way to change the brightness is manually using the FN + F6 and F7 keys.

    Kind regards
    Stijn.

    Please don t be crazy about me, but there is no problem at all. The situation is quite clear.

    First: tools and utilities are similar, but in most cases have to be adapted for each laptop model. It may happen that some tools work on the different model of laptop, but this does not mean that he has to work on each model.

    Second important fact is that Toshiba does not Satellite M40X support for Vista operating system and I guess you won't be able to use this tool. In my opinion, it is not so important, because all the energy-saving settings you can find in Vista power options.

    For utility E - key, I don't see a solution. If you use OS not supported, you must live with it.

  • SOLVED! My new Dell Inspiron does not recognize my HP Officejet Pro L7680

    Tried USB in a different port and it worked!  All AOKAY.

    ---------------------------------------------------------------------

    I have tried everything I can, including downloading drivers and using the print and scan doctor, but without success.  The printer remains invisible to the computer despite a 'bong' telltale whenever the USB cable is connected between the two.

    Who has the magic secret?

    Brian

    Brian,
    The usb port that didn't work, maybe a bad port or incompatible.
    1. who has a USB 3.0 or USB 2.0? USB 3.0 port has a usb with "SS" downstairs, logo for 'Super Speed', even if a usb 3.0 ports should take usb 2.0 devices, sometimes things don't work smoothly.
    2. usb port may be damaged (broken contact could cause the kind of question you see). There are a few contacts on the usb port, some power and some data. When a usb device is plugged in, you get the "bong", this means power is taken between the port and a PnP (Plug and Play) event is generated. The device checks with its info (PnP ID, etc.) if all of the son/contacts work, the computer gets this info and use it to identify the device and search for the best driver for it. One way to tell if the computer has obtained information is to look at Device Manager, if the computer has had the info, there will be a new added feature, those that he can find a pilot, will appear with the name and details, or if no driver is found, 'unknown device', but if you click on details, even if it is peripheral unknown It lists the ID of equipment, etc.). A "bong" without even an 'unknown device' means that the usb port is bad.

  • Need help... New office which does not recognize the IP address

    I need help, my father, I bought a HP for Christmas to replace its old.  Problem is that I can't the computer to recognize the INVESTIGATION period, it says all drivers are working correctly, but still cannot connect either wired or wireless.  I have only addressed dells, it's my first experience with HP on Vista.  I need help fast because I'm about to go home and I would like to have him upward and running, any help or suggestions would be greatly appreciated

    I appreciate the suggestion and assistance.  After talking with tech support, they said it was actually the computer, I returned it and got a replacement and everything works fine.  Once again thank you to all who helped.

  • Media Player 11 install new music Import does not recognize the album - only songs?

    I recently had my laptop reimagee (XP Pro). I copied the MyMusic folder under my documents. Then installed WMP 11 and he started upward. It has imported all the songs, but nothing appears in the views of the artist or Album except a unknown album with all the songs.

    I got so far without resolving the question of the measures:

    • Removed the program using Add/Remove, then reinstalled WMP 11
    • Delete the database files in %userprofile%\Local Settings\Application Data\Microsoft\Media Player and restarted WMP11. Same happes: songs are added, but not the album or artist information

    What now? iTunes has been installed properly recognized all albums/artists (just saying...), but prefer OMP

    Thank you

    smawsky, have you tried to reset the library with the instructions I mentioned in one of my previous answers? Attention to my note on the WMP network sharing Service.

    If you copy a few of these tracks from the disc in the folder external HARD music in My Documents, WMP reads the tags of the files copied? And what about the sample music files which are added to the default library?

    Tim Baets
    http://www.BM-productions.TK

  • Hi the new extension manager does not recognize the new products Adobe.

    Here is the log file.

    [Warning] Tue Aug 25 13:42:10.442 2015 (ExManProductEnumerator.cpp, 146)-failed to get the version of the path of the file "C:\Program Files\Adobe\Adobe first Pro CC 2015!

    Thanks for help.

    That's right, that it is no longer supported for CC 2015 Bekessy

  • I just upgraded to logic 10.2.4 and now it does not recognize my controller - Yamaha P-95. Yamaha has no new drivers yet. Any suggestions?

    I just upgraded to logic 10.2.4 (and 10.11.16) and El Capitan now logical does not recognize my controller - Yamaha P-95. Yamaha has no new drivers yet. RELOADED drivers available and tried different USB ports. The audio works fine. Any suggestions?

    you need to ask Yamaha if they have a work-around or they intend to release the pilots, have a beta driver or what is their recommendation.

    If the logic is compatible with the operating system then the problem is with the 3rd party controller, and the developer will have to answer it. Past that if you have a backup time machine an instance where worked together your controller, the software and the operating system you can restore to that point

    Use Time Machine to back up or restore your Mac - Apple Support

  • 13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. unplugged

    13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.

    This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

  • Try to reactivate my old Photoshop Elements 10 by downloading to the new computer, but Adobe insists on downloading of 14 elements and does not recognize my serial number

    Try to reactivate my old Photoshop Elements 10 by downloading to the new computer, but Adobe insists on downloading of 14 elements and does not recognize my serial number

    Download & install instructions https://forums.adobe.com/thread/2003339 can help

    -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

    -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

    -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

    -you will need to enter your original serial number during the installation for non-Cloud programs

    - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

    Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  • I changed my password to email microsoft through a possible hack and now I can't get into my laptop, it does not recognize my password to microsoft, old or new, what I do

    I changed my password of Microsoft, I couldn't get into my account.  A few weeks later I went to look for my laptop and it would allow me to get on, it says that my password is incorrect.  It does not recognize the old or new password.  What can do to solve this problem, I need the phone for work.

    You can reset your password here: Microsoft password reset Page count

Maybe you are looking for

  • Screen blacked out how I can restore

    my screen has blacked out how to restore it

  • Re: Satellite Pro L300 - does not recognize CD

    Put the CD in laptop and nothing happehs - went to my computer and tried to run from there, but still nothing.Have you tried several CDs and none seems to be recognized - it's like the driver does not work. Please respond in terms for a fool of compu

  • Go reference on note shortcut key?

    I've been Googling for shortcut keys to use exhibitor and clues on my notes, and all the world says it is cmd + ctrl + the + or - key, but it does not work. When I went to edit/fonts part and verified manually options baseline, it is more shortcut ke

  • Satellite A50-104 does not load

    Hello I've had this laptop for a long time so don t know if anyone will be able to help, but it worked very well, quickly drained batteries but nothing major, then today battery goes dead, then I'm going to load and he won t charge or turn on, the li

  • 8610 HP printer all in one: how to scan with very high resolution 1000 dpi?

    I'm scanning pictures very old, very low (about 1 by 1"). On my 8610, the highest resolution I can apparently is 300 dpi. On my 6600 previous, I was able to get 1000 dpi? Is the 8610 really not able to scan at such a high resolution?