Linksys E3200 - what are the parameters that I need to change to get the full speed wireless?

Hello, I never had a router before.

I just bought Linksys E3200, because I need a wireless connection on my HTPC.

I only put a password for my network. Don't touch or changed the factory settings.

My main PC is connected to a router via a network cable,

my HTPC is wiresly connected using the Linksys EA2500 wireless network card. I had a wireless connection.

However, my internet speed on my main PC (cable) is COMPLETE and about 50 Mbit/s.

Wireless on my HTPC is max 10 Mbpsspeed.

My modem, router, main PC and HTPC are in the same room next to the other.

What is the problem? What are the setting do you recommend to change?

Thank you.

Ensure that networks in the router (5 GHz and 2.4 GHz) have unique names on the other. This way you will know what network the HTPC is connected to. After making sure that the two networks have unique names, change the channel to the network of 2,4 GHz. try 1, 3, 6 or 9.

Tags: Linksys Routers

Similar Questions

  • I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

    I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

    I use a processor 2.3 GHz Intel Core i5 with DDR3 4 GB 1333 MHz memory.

    My last similar attempt on another machine resulted in a very slow computer.

    Thanks, Ron

    Apple says the following:

    General requirements

    • OS X 10.6.8 or later version
    • 2 GB memory
    • 8.8 GB of available storage

    For best performance, I would say not less 4 GB and preferably 8 GB or more.

    Your i5 is well able to support properly.

    http://www.Apple.com/OSX/how-to-upgrade/#Hardware Configuration

  • What are the best bluetooth wireless speakers to use with the iMac

    I have the desktop iMac 27 in. on which I have my iTunes.  I want to buy some speakers for the room which will connect to the iMac's wireless.  Someone at - it a system like this to recommend.  I looked the Sonos speakers that run through wi - fy - but don't know if that's what I need.  Any input would be appreciated.

    Speakers are a very personal choice. Better would be those that you love the most. Which may be different from someone else.

    Excellent fact Bose pregnant BT that work with your iMac, I like them a bit. However, some say that they can be too bass-ey.

    You must listen to the speakers to find the ones you want to use.

    Try looking at Bose or Harman Kardon to start. Any pregnant BT should work with your iMac

    .

  • T530, what are the sata speeds?

    Does anyone know if the slot msata T530 uses sata2 or sata3 speeds?

    The same with the main drive Bay and ultrabay slim sata adapter housing. Are these sata2 or sata3?

    Manual equipment is unclear. I looked at.

    There is no whitelist for mSATA mSATA is SATAII.

    Main hard drive and ultrabay = SATAIII

  • Control Panel - give me my labtop-"Tablet PC settings" is that at the time? What are the parameters?

    Control Panel - give me my labtop-"Tablet PC settings" is that at the time? What are the parameters? Common sense is the garment of the genius work.

    Hello

    Yes some of the Tablet Settings 'could be useful on some laptops to some users." Easier to understand
    This is for all users of Vista to make a special version for users of the tablet.

    If not using a Tablet you can simply ignore them.

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • What are the parameters? How are Variables differenet? Why we can not use variables to pass data to one sequnece to another? What is the advantage to use parameters instead of Variables?

    Hi all

    I am new to TestStand. Still in the learning process.

    What are the parameters? How are Variables differenet? Why we can not use variables to pass data to one sequnece to another? What is the advantage to use parameters instead of Variables?

    Thanks in advance,

    LaVIEWan

    I'm sorry... I discovered that... its not at all possible to pass data to another sequence using variables... it must be through settings... once again I apologize for the display of such a stupid question

  • What are the ideal memory for Adobe SpeedGrade parameters

    What are the ideal memory settings Adobe SpeedGrade? If it is possible how can I define a perfect way for my pc and Adobe Cloud applications?

    Because when I use SG need all the RAM (95%) in use and it crashes sometimes, through the use of all the RAM.

    SG settings and the PC:

    The PC:
    Intel core I7 processor - 5930K 3, 5 GHz
    16 GB OF RAM
    64 bit
    SG
    2015.0 CC release
    Memory management
    Installed RAM 16 GB
    Reserved for other applications 8.2 GB RAM
    RAM available fot Adobe apps 7.7 GB

    If it is possible how can I set the optimal settings for my pc and Adobe Cloud applications?

    Thank you in advance.


    Kind regards


    Michael

    SpeedGrade 2015.0 RAM eating bug, didn't matter what parameters have been set, SG would eat all the RAM

    I paste the link to the thread here related Speedgrade eat all my 32 GB of RAM - question?

    After SpeedGrade 2015.0 came SpeedGrade 2015.0.1 (or was it a different number?). Now the current version is 2015.1

    If you want to avoid the RAM eating problem, consider an update - but also consider that it is not recommended to update to mid-project. Also consider that when direct linking of first in SpeedGrade versions must match. If you update a you will be locked out of each other - as in if you update SpeedGrdae, but not first, your first will be able to open your "latest version SpeedGrade.

  • What are the changes that the installation of BizTalk has on the SQL instance?

    Original title: BizTalk.

    Hello.

    I want to install BizTalk.
    BizTalk and SQL are different servers.
    I would like to know what are the changes that the installation of BizTalk on the SQL instance.
    Can anyone help?
    Thkz

    Hello

    I know it's late to answer this question, just in case someone else look through this issue.

    BizTalk installation does nothing to SQL Server, but make BizTalk Configuration. When configure us BizTalk on any SQL Server (same or different), it creates the required databases and SQL Server works on this server.

    Here is a series of articles on installing and configuring BizTalk Server: http://sandroaspbiztalkblog.wordpress.com/2013/05/16/biztalk-2013-installation-and-configuration-install-and-configure-biztalk-server-2013-part-9/

    Thank you!

  • If known, what are the main components, or variables that make unnecessary Netflix streaming when Silverlight is to work on other Web sites?

    I uninstalled it, reinstalled, reset all default values, bought new equipment, contacted Netflix, Microsoft, sampled through Silverlight video other sites sampled through my laptop and pc turn to my roommate, but to enjoy.

    What are the other options to get Silverlight to work on my Tower, despite the fact that the application works well on it and for a long time before the current state?

    Hello

    Check in the SilverLight Forums:

    SilverLight - Forums
    http://forums.Silverlight.NET/

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Enter the characters before sending your message... What does that mean? What are the characters?

    That actually means "enter characters before sending your message?  What are the characters?

    Then I suggest that transfer you your question in the APPROPRIATE forum. This forum is NOTHING to do with Hotmail - as the title might suggest.

    Here are the HOTMAIL forum:

    http://windowslivehelp.com/product.aspx?ProductID=1&WA=wsignin1.0

  • When I close a program, it seems that the page is molten! What are the causes that

    Just as I said, when I close my Internet explore the page looks as it melts down.

    When I close the Office computer looks like it is melting.

    What are the causes and how can I fix what is wrong

    I ran mcafee and malware programs.

    I have compaq presario v5000

    Windows xp

    32 bit

    do not add ons running.

    I don't see how someone can offer you promising ideas knowing more about your system.  The best you can get is speculation on what might work sometimes maybe. All we seem to know is what sort of a Presario V5000 with XP (there are a lot of different V5000s).

    It worked better in Mode safe or clean boot?  Even if it did, this does not your problem, unless you want to run mode without failure or boot for the rest of your life.

    If you restored to the factory settings in the past, then you have all your video drivers updated?  Chances are good that everything that comes out of the plant is outdated when it leaves the factory.

    If I were you, I would first take a look at your specifications and make sure that your video drivers are up to date.

    Should be considered ditching of McAfee (since it's a famous memory and CPU hog) and replace it with something with a smaller footprint like Microsoft Security Essentials (MSE).  You can simply use the McAfee uninstaller install temporarily and see how things work... you can always reinstall later if you are forced to do it, right?  (but I wouldn't).

    If you still have the problem after all and the verification of your video drivers, check the properties of your system performance (especially the Visual effects) Options.

    Why don't you do this so that we can see what you have:

    Click Start, run and enter in the box:

    Msinfo32

    Click OK, and when the system info summary appears, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here in your next reply.

    For video device and driver information, expand components, click view, click on edit, select all, copy and then paste the information here.

    There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

    This will minimize back Q & A and eliminate guesswork.

  • Windows closes programs as it is to melt! What are the causes that

    When I close an Office program looks like it's melting!  Even when I turned off the computer.  What are the causes that?

    Thank you

    Deb

    Hello arcand1772,

    Thank you for the question!

    It is disheartening to know that have problems you while closing programs. As I understand it encounter you problems during the closure of the programmes.

    1. the is the problem with a particular program?

    2. were there any changes (hardware or software) to the computer before the show?

    Post a screenshot of the issue to help you best.

    How i: post a screen shot on this forum? -Microsoft Answers

  • What are the causes of the log of user account on missing cursor in Windows XP? I have two trays of office that they have this same problem. If you restart them the cursor returns?

    What are the causes of the log of user account on missing cursor in Windows XP? I have two trays of office that they have this same problem. If you restart them the cursor returns?

    Hi DaddyJeff,

    1. don't you make changes before the show?
    2. are you referring to the cursor in the area of user password on the login screen of Windows?
    3. when the cursor goes missing, the mouse pointer works on screen?

    It is difficult to say what is causing this problem. If the mouse pointer freezes or stops working, then we recommend you to reinstall the mouse. To do this, try the following steps:
    a. sign in to Windows.
    b. Click Start, click Run, type devmgmt.msc, and then click ok.
    c. in the list of objects, expand mice and other pointing devices.
    d. right click on the sub element and click on uninstall.
    e. unplug the mouse and plug it back.
    f. the Device Manager, select an item in the list, click the Action menu, click scan for hardware changes.
    g. check if the mouse is detected, if so, then install it.

    See mouse USB which is connected to a USB 2.0 hub is not detected by Windows XP


    Note:
    if the problem persists, restore the computer to an earlier time. See How to restore Windows XP to a previous state

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • What are the connectors on the video card that comes with a hp pavilion elite h8 - 1280t?

    What are the connectors on the video card that comes with a hp pavilion elite h8 - 1280t?

    Standard card is 1 GB DDR3 AMD Radeon HD 7570 [HDMI, DVI, VGA via adapter],

    Thank you, I thought, but could not find a photo or a specification which connectors.   I need to order some cables to put monitors at long distance of the system units and wanted to make sure I ordered the good.   I don't have the system units or monitors but they are still in the pipeline of generation/ship.

    Dave

  • What are the criteria that the music App or music cloud determines if a song should be reported as 'stream only?

    • I have a very large music library that I uploaded to the cloud.
    • All the files are physically located on a local hard drive.
    • All files are .mp3.
    • All files were purchased from sources other than the music of the Xbox.
    In a seemingly random way, there are songs that have been reported as 'stream only' despite the above conditions.
    In some cases a single song in an album has been reported as 'stream only.
    What are the criteria that the music app or music cloud determines if a song has to be marked as 'stream only'?  If I had this info, maybe I could understand something.
    Please don't tell me to do something about that.  My huge music library; 45K songs, 260 GB in size.  Change files and turn on clouds or extinguish any simply questions I have hours of work manually download songs to the cloud which music xbox has not recognized.

    Hello..

    See this article for more information on the application of music

    http://msdn.Microsoft.com/en-us/library/Windows/apps/hh868270.aspx

    http://Windows.Microsoft.com/en-in/Windows-8/play-music#1TC=T1

Maybe you are looking for

  • The URL I type in Talk21 is not clickable. They are Chrome and IE.

    Hi guys,. When I'm composing a new mail in my account Talk21.com , the url is not clickable. This is not the case if I open Talk21 in Chrome or IE. I tried 3 different computers laptop (Windows 7) and a desktop computer (XP) does not. I am running Fi

  • Equium A60 issue of the wireless USB mouse

    I bought 3 optical mouse for my equium A60. The first 2 have worked for a short period, but then appeared to be very erratic, beating on the entire screen and the slightest touch. I just bought a third and spend money on it to combat this problem, bu

  • Sansa Fuze 8 GB and memory

    I just bought a Sansa fuze 8GB and need to know what capacity micro SD card, I can use. I said that if it's a 2GB, I can only add a 2GB card and a 4 GB, 4 GB card and so on.  If this true? Thanks in advance for any answers.

  • Search SQL question

    I have install a SQL db in my application and research works really well.  I have the onTextChanged and onTextChanging the value: datasource.query = "Select * from items where name like searchtext.text" I'm basically the database load and charging ba

  • Windows XP mode and Windows Virtual PC

    My old system crashed (looked like 15 years in any case lol) and a low-cost system now has the SATA card and readers, but my old HD is ok. My new system is installed with Windows 7 Ultimate, but my old HD has WinXP with all my music, games and other