Linksys makes a Combo of Modem/Router Wireless N cable

Similar Questions

• Modem router Wireless N upgrade?

  I have a Linksys BEFCMU10 ver.2 modem which has served us for about 8 years.  I've recently updated our wireless n router, but have seen no improvement in the coverage area or speed.  The seller in Microcenter told me that my current modem was fine, but I wonder if I need to improve my modem to take advantage of the N WiFi feature.  Another thing, I remember when the tech our cable connected to the modem, it added a 10/100 switch.  Can it be purchased?  The research I did on the forums, it seems that I need a compatible 10/100/1000 switch for the gigabit speed.

  I apologize for the basic questions, but I tell myself that if I want to learn I have well start somewhere

  Thank you!

  It is not question of cause I don't think you have 100Mpbs subscription from your ISP. This modem is good for home use. You will get your your router Wireless N speed and that's only within your local network.

• A100-306 & office via Modem/Router wireless connection: access denied

  I'm trying to file/printer sharing between my laptop A100-306 and office units.
  I used the Windows Wizard to create the internet/LAN connection.

  It has been a success with the connection internet (via Belkin 54 g Wireless Modem/Router), but my "Troarn" LAN does not seem to be recognized by the laptop.
  When I query, on the laptop, My Network places/computers view of the Working Group, the page is white!

  But when I question, the office, My Network places/View workgroup computers, computers are displayed. If I try, on the desktop, for connection access is denied.

  Someone at - it suggestions?

  Hello

  -Check if you have disabled the firewall on the laptop.

  -Be sure that each computer is placed in the same working group.

  -Check the TCP/IP protocol settings.
  If a computer has the IP 168.192.50.1 the other should for example has 168.192.50.2 and so on.

  -If you want access to all records, you must set the rights for sharing this folder.

• Windows fax with modem/router wireless - HELP

  How can I add the free FAX from Windows program that comes with my netbook windows7?  I have a Siemens Gigaset Smartbox 604 wireless modem/router, but the choices are: 1) an internal modem, 2) an external analog modem, 3) a fax through the system administrator server.  What should I do? (Please answer ASAP)

  Fax from a computer, you must have an analog modem installed, internal or external.
   
  Reason: the fax machine at the other end is connected to a regular analog telephone line, not cable or a DSL line.
   
  Welcome to the Windows 7 Compatibility Center: section analogous modem...
   
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/Browse.aspx?type=hardware&category=networking&subcategory=modems
   

  Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• BEFCMU10 Modem Router wireless

  Any suggestions on what wireless router to get to use it with my current modem BEFCMU10.  We are connected to Comast.net and first time was thinking a Cumuldu WCG200 router/modem, but some of the reviews were not good.  Any help would be appreciated.

  Thank you.  I will check into each of them and make a decision.

• With the help of RV016 with DSL modem/router/wireless

  I have a question of configuration that will probably seem obvious to many readers, please go easy on me: I'm new to this.  I used a RV016 because it will allow me to have the diversity and conservation of roads to the internet for our SMEs.  Since we are now counting on the insurance and processing of credit cards that is the Internet, I won't be down if the cable company fails, so I added the DSL service.  When DSL service arrived, the carrier provided a modem Motorola 3347 which includes the router, switch and wireless in one device.  Instead of installing a WAP browser, I would like to use the 3347 wireless.

  However, users on the wireless cannot print to printers on the RV016.  Is it possible that I can make visible printers to wireless users?

  Photo shows the problem...

  

  Yet once, guess I am missing the point and GENTLY try to educate myself.

  Thank you very much.

  Hi Cunnida56

  If I remember the RV016 is installed in what called default gateway mode and you will have to be in router mode.

  Gateway mode essentially allows NAT (NAT) services, so that the LAN is coordinated against the WAN IP address.

  You have an option under Setup > advanced routing to assign the RV016 router, mode option and save the settings.

  In router mode NAT is disabled, but you also have to disable the SPI Firewall options and block Wan requests, all of these options are found under the Firewall tab.

  Your next step is to add a static route in the motorola 3347 that points to the 192.168.2.0 network.

  This static route will allow wireless clients to know the WAN1 address the RV016, who will act as a gateway to the 192.168.2.0 network.

  Good luck.. and have fun, do not forget to save or to apply your chages as you go.

  Best regards, Dave

• Connect an Airport Express Terminal to a non - airport Cable Modem/Router wireless

  I want to use my Airport Express as a wireless adapter to connect my TV to my home wireless network. How to connect an Airport Express Terminal to a non Airport wireless router?

  Not sure I understand your question.

  If the AirPort Express Terminal will connect and 'join' the existing wireless network using a wireless connection... How the TV will connect to the AirPort Express?   Wireless?   Wired Ethernet connection?   USB connection?

• No internet connection with C6300 only cable modem/router - No. Ethernet cable plugged

  About once or twice a week I wake up my desktop PC and see an icon (bottom right) which indicates that I have no internet connection. When I run the troubleshooter network (right-click on the icon) it says to plug in my ethernet cable. I replaced the cable with another know good cable, but the problem continues to return (though intermittently). If I unplug the ethernet cable from the port of my C6300 Netgear and plug it back in the same or another port, the internet connection is restored. I'm on Windows 10 edition 64 - bit OS on my desktop tower PC (Dell). My internet provider is Cox Communications through their cable with up to 100 Mbps of speed. My Netgear firmware version is V1.02.20 to help you can provide me to solve this problem would be appreciated.

  Well, it has been a few weeks of performance without error since I replaced the Netgear C6300. So I close this investigation as "FIXED."

• Xfinity X 1 modem/router is compatible with the Airport Extreme? How it should be configured to maintain my wireless network?

  I got a modem Comcast/Xfinity upgrade. Xfinity X 1 modem/router is compatible with the Airport Extreme? How it should be configured to maintain my wireless network?

  Whenever you change the modem or modem/router on a network, AirPort Extreme will be reset to the default settings and then set it up again to work properly with the new modem. For this he would be...

  Turn on AirPort Extreme for a few minutes... If it is not already turned on

  Hold in the reset button on the back of the AirPort Extreme for 7-8 seconds, then release it.

  Allow a minute for the AirPort Extreme restart to a slow, flashing amber light status

  Make sure that an Ethernet cable connects to one of the four LAN <-->Ethernet ports on the modem/router on port WAN "O" on AirPort Extreme

  To start the Setup program, click the WiFi icon at the top of the screen on your Mac and are looking for a list of the new AirPort base station

  Just below that, click directly on the AirPort Extreme and then follow the prompts for configuration "Wizard".

  When you configure AirPort Extreme once again, you can use the same wireless network name and the same password that you used with AirPort Extreme with the 'old' modem, if you wish, or use a new wireless network name and password

• HP Deskjet 2542: Cannot print wireless Deskjet 2542 after installing the new modem/router

  We have recently installed a new Netgear modem/router and have not been able to print wireless since installation. I tried everything I could find on the forum and still no luck. Any help will be appreciated.

  Replacement/change your wireless router, try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

  Make sure that your router is set to a fixed channel wireless as the 1, 6 or 11, never 'auto '.  Try each of the channels one at a time.  Make sure they are spaced at least 5 feet.

  However, if you have a gateway device (modem + router), all gateway devices are terrible for connectivity and wireless performance.   If this does not work, suggest you put this bridge in full bridge mode device and install your own router of high quality that YOU have full control over.

• modem router WAG120N wireless security configuration

  I use modem router wag120n but is confused abt how to set up wireless security of it is. Security Wireless Configuration recommended in tutorial given here is very different from what is given in my page of configuration routrs.

  I don't know how to manage the key renewal option. If I leave as 3600 seconds does that mean that I have to enter my device a new key wireless connected to the router after every 1 hour?

  Well well with firmware linksys/cisco security gateway wireless configuration seems even that is mentioned in the link provided: http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&app=vw&vw=1&login=1&json=1&docid=7b0d8344c5524f75a8d5b... . But if in case it looks different let it me know what exactly what you see in the configuration page.

  Group key renewal determines how many times your group exchange key. The renewal time should not be too short or too long. The default is 3600 seconds.

  You don't have to deal with the renewal of key. It happens automatically. Customers do not lose connectivity, just the key for the changes of the connection. You won't notice. The longer the interval longer guarantee the link (in theory) as a striker who wants to break the encryption key has less time and less data to work on...

  But once again: it does not affect customers wireless connected. It's all past automatically just as it happens when the connection is established in the first place.

• HP Photosmart B209a is no longer connect wirelessly because change of modem/router

  I recently had to change a modem Motorola Surfboard, router Netgear (both at least 5 years). The new modem/router combo is a C3700 Docsis 3.0. My printer HP Photosmart Plus B209a model is no longer connects to the wireless network.  I tried the push button and pin. I get a WPS, unable to connect. When I print the network settings, my network is listed but the printer shows offline with no active conection. Firmware is EIL1FNO926AR and stands as the last revision of the printer. Wireless 802.11 under the mac address is given, and status is offline.  In addition, the printer and modem/router are about 3 feet apart on the same desktop.

  Any ideas for what to do to get my printer back online or is not compatible with the new modem/router?

  Thank you

  Replacement of your wireless router try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• Connect AirPort Express to lemon (Rogers Rocket) Wireless Modem/Router

  I just got Rogers Wireless internet new modem/router Hitron.  I use modem/router mode.  It's great. Very fast and a lot of range. Covers all 3 floors of my house.

  I want to connect an Apple Terminal to my Hitron router with an ethernet cable and put the Hitron in Bridge mode. I want to continue to use the Hitron router as my main and only router.

  However on another floor, I would use an Apple Airport Express connected to my stereo with a jack 1/8 '' to play my music wirelessly from my iTunes from Apple.

  To do this, I need this Apple Airport Express Terminal to 'find' the Hitron router.  How can I get to find the router Hitron?

  I guess that you have a current version or recent of the AirPort Express with the default settings.

  As long as the AirPort Express is located where it can receive a strong signal of the modem/router...and wireless Hitron the Hitron aircraft provides a wireless signal that uses industry standard wireless settings, the AirPort Express can 'join' the wireless network. Wired Ethernet is not necessary.

  Note that the AirPort Express will not "spread" or "repeat" the signal from the router/modem lemon to provide additional coverage of wireless signal wireless, but it can be used to join the wireless network and provide a signal of airtime for your stereo.

  Simply use a Mac running a current or recent operating system, or an iPhone/iPad and configuration "Wizard" Apple to set up things upward. The wizard will automatically offer the correct configuration to 'join' the wireless network. All you really need to do is to enter a device name that you want to use for the AirPort Express and the password of the wireless network and confirm.

  Start the wizard by clicking on AirPort Express under the title of the new AirPort base station.

  

  On an iPhone or iPad, the screen looks like this:

  

  In the example below, the wizard has detected a network named "2WIRE902" for the AirPort Express join. You will see the name of the wireless network that provides the Hitron modem/router on your screen. Just enter a name of device for the Express, then type the wireless network password, then type it again to verify.

  Click next at the bottom right of the window and the AirPort Express displays a green light for a minute or two and you're done.

  

• Can what comparison be made between time capsule and Smart RG s505 wireless modem router for wifi

  Can what comparison be made between time capsule and Smart RG s505 wireless modem router for wifi

  Superior...

  After all, the chip is mainly a modem.

  Wireless is there but not designed as the primary connection.

  Wireless 802.11n 300Mbps AP with 2 x 2 MIMO Wireless bridge, WDS multiple SSID, including isolated invited SSID WiFi QoS (WMM) and PowerSave wireless security: • Wi - Fi Protected Access (WPA, WPA2) • AES, TKIP, WEP encryptio

  It is the Wireless N standard.

  The TC is dual-band simultaneous AC1750... even if in fact apple never leaves anything use 300mbit on the 2.4 GHz is more like AC1450... It is also 3 streams on both bands not 2 x 2.

  The fact that aid.

  The only thing to note is that a router from Apple can join never a router wireless not apple... so, there must always be plugged in by ethernet.

• What linksys Modem router supports WOL or DHCP reservation?

  Hi all

  What linksys Modem router supports WOL or DHCP reservation?

  Thank you Alex

  Hello. I checked the site made up of Cisco and up to 3000 X & X 2000 has the DHCP reservation and like many Eseries routers they have. Just try to check homesupport.cisco.com.