Linksys router WRT54GL is unable to connect to internet through motorola sb4200 modem

Hey there,.

I'm having trouble connect Router wrt54gl wireless to a motorola sb4200 modem. It is intended for dhcp automatically connect!

but no luck so far!

any help much appreciated!

Thank you

Martin

You said nothing about the netgear. In this case you don't probably have internet either if you connect your computer directly to the modem.

As I wrote before: the ISP is blocking your internet connection on the device that you have connected before. If it is the netgear you clone the mac address of the netgear. It must be printed on the netgear.

Otherwise try to reset the modem. Or unplug it from the power supply and wait a few minutes. Then connect the router to the modem. Turn on the modem and once it is turn on the router.

Tags: Linksys Routers

Similar Questions

  • Unable to connect to Internet through router WRT400N.

    I was able to connect to the Internet via the wireless, but not today it stopped working (without computers can connect if not just my wireless). I am able to connect to the Wireless router and update the parameters, I am able to connect to the wired router and change the settings. I am able to connect to the Internet by plugging directly into the modem and using this same cable I plug it into the router and then no internet. I don't know what to do anymore as I power cycled many times. Any help will be great. Also - all lights seem to be lighting up as usual.

    Who is your Internet service provider?

    You can access the Internet when you connect the computer directly to the modem. This means that the modem works fine.

    Connect the modem to the Internet port and the computer on the Ethernet port on the router.

    Open the router configuration page and check the settings of the router's Internet connection.

    Follow this link to configure the router with cable Internet service.

    Follow this link to configure the router with DSL Internet service.

  • On my iMac running training camp. I get a message saying that my PC cannot find the wireless hub and it is unable to connect to internet Explorer. Help!

    Connection Wi - Fi with internet explorer 8

    I'm under Boot Camp on my iMac with OS 10.6.8. I am connected to the hub of my son-in-law over a wireless connection.  I can access the internet using Safari on the side of the Mac of the partition successfully, but I can't access the internet by using a wireless setup on the side of the PC of the partition by using Internet Explorer 8.  I get a message saying my side PC created by Boot Camp can not find the wireless hub and is unable to connect to internet Explorer.  Help!

    Hello

    ·          What is the version of the operating system running on your computer?

    I suggest you to install the drivers for the network card on the manufacturer's Web site and check if it helps.

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    See: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

  • My computer connects to the wireless internet, but I am still unable to connect to internet even though it is always connected to the wireless connection.

    connection Wi - Fi

    My computer connects to the wireless internet, but I am still unable to connect to internet even though it is always connected to the wireless connection. How can I solve this problem and what could be the problem?

    Hello

    1 did you change your computer, after which the issue started?
    2. during how long have you had the problem?
    3. what web browser do you use?

    I recommend to update your network card drivers and check if that helps.
    http://support.Microsoft.com/kb/283658

    Let us know the status of the issue and also please answer these questions.

  • Unable to connect to internet home with Blackberry 8900 for windows 7

    Unable to connect to internet home with Blackberry 8900 to windows 7, error = a network cable is not plugged in correctly or may be broken, tried a different cable, same problem?

    Hello

    1. are you able to use the Blackberry 8900 on any other computer?

    2 have had any changes made to the computer before the show?

    Please follow the steps in the link.

    Support for attached modem use

    http://btsc.webapps.blackberry.com/btsc/viewdocument.do;jsessionid=55C4DA5CE489E53E47CDDDB9FA0C6A59?externalId=KB05178&sliceId=2&cmd=displayKC&docType=kc&noCount=true&ViewedDocsListHelper=com.kanisa.apps.common.BaseViewedDocsListHelperImpl

    If you are still experiencing a problem, I suggest you to contact Blackberry support team for assistance.

    http://supportforums.BlackBerry.com/T5/community-corner/BD-p/corner

  • I have a SBS 2011 and cannot connect to internet through VERIZON FIOS.

    I have a SBS 2011 and cannot connect to internet through VERIZON FIOS. The SBS is unable to detect the IP address and gave an error message. I never get to a screen that allows me to type in the "IP address of the router" or "IP address". Verizon told me that their router address is "192.168.1.1". After a new trial, I added my NETGEAR FS105 switch between the FIOS router and my PC 2 and SBS. Result - conflict of addresses of servers.
    Any suggestions or solutions to this problem?

    Thank you
    Chuck

    Hi Chuck

    Your question is addressed in the Microsoft Answers forums.

    Please ask your question in the following forum.

    Small Business Server Forum:

    http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

    Concerning

  • With the help of TC as a bridge between the Linksys router.  TC will be connected by a cable ethernet to another building.  Will this work? Help.

    Need to get wireless to my workshop about 70 feet from the House.  Linksys router connect to the Hughes Net modem uses.  I have a new time Capsule I would like to set up in the workshop.  I have an ethernet cable from my house to the workshop.  (Had bad lighting storm last week and knocked out two Linksys routers.  TVs all otherwise not serious!  Need help, TC inlays.

    Connect the ethernet to the WAN port on the TC and just run the configuration wizard utility airport... it should automatically configure the TC correctly... Have you already tried that and it didn't... If so the TC attached as well during the storm because it can damage the ethernet ports.

  • Linksys Router WRT160N - Wireless does not connect to the cable modem

    I installed the Linksys WRT160n router to replace an existing G router. When installed the new wireless router works, but the router does not receive a connection (IP address - look under status) of the cable modem (so no internet). When I reconnect the old router and then connect the new router, I get any internet connection through two routers (so the old dishes router the IP address that accepts the new router).

    I have configured the router N new for

    "Automatic configuration - DHCP", no need for connection, IP address dynamic, etc (as required by ISP - Timewarner)

    I tried to renewal and release IP address by the router N when it is connected directly to the main switch (the switch to connect to the cable modem). In so doing, shouldn't that assign a new IP address to the router?

    I am allowed 3 IPs from the cable company (because of the switch) and I use all three with three different internet IP cameras to each address for home security system.

    Any suggestions on why the router is not connecting to the internet? Do I need to reboot physically everything on the network, including the cable modem?

    If I understand your post, you said that your ISP gives you 3 Internet IP addresses and you have 3 cameras that use one of these Internet IP addresses.  If this is correct, then that leaves no IP Internet address for your WRT160N use - so that would explain why your WRT160N cannot get an Internet connection.

    If I misread your post, and you have an Internet IP address available for the WRT160N, you might have a problem with your modem and two WRT160N tries to use the same 192.168.1.x subnet.  To check this, follow these steps:

    (1) Please indicate addresses that use your cameras (IE before you take the test below).  If the addresses do not begin with 192.168, then erase the last half of each address.

    (2) Please indicate your ISP

    (3) Please indicate the make and exact model of your modem (not the WRT160N) number.

    (4) Please do the following test:

    Put your entire network.  Disconnect the switch (including cameras) to the modem.  Using an ethernet cable, connect your modem directly to your computer.  (Do not use the WRT160N for this test).  Turn on the modem and the computer.  Make sure you have an active Internet connection, then go ahead with what follows: (even if your Internet connection does not work, include this and move forward.)

    Go to 'Start' > all programs > Accessories > command prompt.
    A black DOS window will appear. Type "ipconfig/all" (with no quotes), and press the Enter key.   Copy all results in your next post.  To make the copy, highlight the results, and then use the keys copy (Ctrl-c) and paste (Ctrl-v) keys.  If your "IP address" does not begin with 192.168, then for security reasons, delete the latter half of your IP address.

  • Unable to connect to Internet in Firefox 33.0

    I just installed the FF33.0 update and I am unable to browse the Internet.

    I'll have to use a different browser on the same laptop to access this site.

    I have Windows installed on a computer 8.1 laptop i7. I connect via WiFi using my router broadband. The connection is good (checked and double checked). Can't even access my router through FF33.0 GUI.

    I checked the Firefox site and downloaded FF33.0 from there. Went through the process (update was chosen) and the same problem occurred.

    Hello, normally these problems are caused by a security/firewall software which does not recognize and therefore blocks the new versions of firefox. If please delete all the rules of the program for firefox to your firewall and let it detect the new version of the browser again.

    Difficulty of problems connecting to websites after Firefox update

  • Satellite Pro 6100: unable to connect to internet via wireless network

    Have had some problems with the audio device Yamaha for another thread, which now seems to be resolved. Thank you!

    However, do not know why, but now unable to connect to the internet via a wireless network, although the router works well as another computer in the House is connected wireless.

    When you check the available wireless networks it comes up with "no wireless networks were found in range, make sure that your computer's wireless switch is on.
    Where to check it, can anyone help?

    Thank you

    On the left side, there is WLAN switch. Make sure that the switch is in on IT. After doing this using FN + F8 key combination and activate WLAN device.

    After having done that, you should be able to see the WLAN networks available in your area.

  • Unable to connect to internet via WiFi

    Hello

    I am unable to connect WiFi with my laptop. It displays connected to the router but the Red (X) between the router and the network. In the system tray to allow brand yellow exclamatory sign wireless. I am able to connect using my cell phone & macbook pro with WiFi, so there is no problem with the router. When I try to solve the problem using the windows feature, and then he said gateway is not available. I can connect to the internet using the cable & I can connect to the Wi Fi on different router but not able to find out why it does not connect with this router Xfinity?

    Here are the details:

    Laptop computer: laptop Compaq Presario CQ58 155SA
    Serial number: [personal information]
    Product number: B6K01EA

    OS: Win 7 64 bit

    Router: Xfinity Comcast

    Please notify. Thanks in advance.

    Thanks & best regards,

    REDA

    Say hello to new raj_sach.

    You have to call Comcast and ask another router.  This model is known to have many questions.

    If you take a look at the job for the router (click here), you can see that it supports up to Windows 7.  This means that all users on Windows 8 will have an update of the firmware (even if you have Windows 7, I wanted to report it).  ARRIS published an update that solves a number of problems with this router - but it will not work on the version you get from Comcast.  This means that Comcast will have to release their own update to solve problems.  You can see on this site on the site of Comcast that this router is known to have problems.

    You can see similar problems in this article and this thread.

    Contact Comcast immediately and ask for a new router.

    Have a great day!

  • BlackBerry smartphones URGENT aid NEEDS! 'Unable to connect to internet.

    Hi, hoping someone on that can help me.

    I have had my blackberry of the flame for about a month now, I'm with vodafone UK and my rate includes unlimited internet access. I was able to use the internet very well until two days ago, when I got a message saying "unable to connect to the internet, please try again later" I contacted vodafone to this topic earlier in the day and they were quite baffled, told me that everything on my account seems fine and should work fine. The person I spoke made me remove my service books and you sign up again using host routing table. Finally after trying many other things (pulling on the battery, a soft reset, update my SIM Card.) removing books worked service!

    Now (after a hard reset I did) the phone displays the same message telling me I can't access the internet. I repeated the steps to remove my service books and register again, but it only allows me to browse the internet for a short period, until the message is displayed again?

    Everything works fine... Apps, Messenger, call, send SMS...

    Please if someone knows something that will help then I would be very grateful. (Also I did a full cleaning of the phone security - it did not help, the message was still displayed.)

    Hi & thanks for the quick response.

    After phone vodafone up (yet) I was put through to the technical support who told me able for them to update my card sim in order to correct the flaws that I needed to go into internet options, manual switch and choose a random network my phone is picked up (obviously don't pick up not vodafone). After confirmation that my sim card has been updated at the end there I then switched back to automatic in my internet settings and it told me that I have to turn off my phone and take out the card battery & sim for an hour.

    After all an hour and a half, that I decided that I had left the phone long enough & tried to access internet when, surprisingly it worked! (and it's still working fingers crossed).

    Once the phone was back on I received notifications informing me I was registered with the network and I should start to receive email & tel in no time... I did!

    So for someone who is having the same problems or similar, I suggest the ringtone to the top of your service provider and asking them to update your sim card!

    Thanks again for your response, I hope my phone WORKS now as I really like my Blackberry Torch

  • Unable to connect to the server of the modem.

    Hi guys, I have a major problem.

    Whenever I connect to internet with my modem, it works. But, when I connect to internet with my router and modem, I can not connect. But I solved my problem by resetting both, my wireless router and modem. Then after I have my wireless router reconfigure everything I have to do is Connect Server from my modem. But I can't connect to the server of the modem. I am tired of connect with 'admin' (that is, the password), but I can't always connect to it.

    I use: Verizon Broadband Network

    Model of ultra RangePlus Wireless - N Broadband Router: WRT160N

    Model of Westell 6100 modem

    What is the problem? Everyone knows about this problem before?

    You won't be able to connect to the modem, as long as the router is plugged

    You must configure the modem first to fill mode, and then connect the router and you connect to it

    1.) disconnect the router and have only the modem

    go to 192.168.1.1 enter

    This will take you into the verizon modem / if you have reset the modem then your username is; Admin

    your password; password

    Once you lopg in what it will ask you to change the name of user and password

    Just type ADMIN in all 3 areas

    now that you are connected to the modem. Access the network at the top, then network connections on the left, broadband connection, you will then put your Protocol on bridge deck / routed.

    now go to the top wireless settings and make sure wireless is enabled

    you have the option to set up a security key on basic security settings

    Once your modem resets then plug your router, you are now in bridge mode and moved modems connect to your router.  You must restart the modem and the computer just to be taken into account...

    also, make sure and update your list of network on your laptop

    I hope this works

  • WRT54GS - no internet connection is detected and yet my computer cable to connect to internet through router

    I had my router for a little over a year. I am connected to a wild blue satellite modem. He has worked without problem for a year.  Now, he claims not to detect an internet connection, even if the computer connected to the router has no problem connecting to the internet. I just can't connect wireless to the internet because the router thinks that there is no internet connection. I have reset several times, turned on and off the power to the modem, followed all the troubleshooting instructions. All the lights on the modem and the router. I need to replace the router, or I would encounter the same problems with a new?

    If you use the update 1.6 LELA LELA 3.0 and your problem will be solved.

  • Satellite A215-S7428 unable to connect to internet by LAN cable

    Comes with * ethernet card - however.
    I can't connect to the internet through an ethernet cable. Card is "activated" and "Properties" indicate that it works. I moved the cable from the back of the XP laptop and XP has no problem so I expect no problems.

    The only perceptible config diff between XP and Vista is THAT XP shows "cDHCP enabled" in the IP address box. Vista indicates "automatic configuration only.

    Any thoughts?
    * Realtek RTL8101E PCI_E Family Fast Ethernet NIC (NDIS 6.0).

    Hello

    Vista and XP supports similar settings and general there should be no problems using the LAN card.
    First check to see if the network card driver has been successfully installed! This can be checked in the device-> network cards Manager

    If there is everything ok please access the LAN properties and automatically sets all (TCP/IP, DHCP, etc.) on

    I also recommend checking all security settings. Vista supports the new firewall and security features to lock down access to the internet.
    Should take a look in the options!

    Good luck and best regards

Maybe you are looking for

  • Authentication on Toshiba NB300-108 problem

    Windows 7 suddenly crashed recently and since then, I got a message saying that my copy of Windows is not genuine more (I've never touched). I used the regular procedure with slmgr/cmd/FLIR and rearm for reinstall the license but it seems that the Wi

  • 3rd party case

    So my POP just gave me his old Pavilion elite e9220y, I wanted to change the case for a new one that I saw online, if I make sure it's the same form factor with I think is a MID case should not be a problem right?

  • DesignJet T520 36in: DesignJet T520 36in printing problem

    I have a banner that I created in Adobe InDesign CS6.  File is 12.2 MB.  The file was created 36 "x 70".  When I try to print in our T520 it will print only a small part of the left area of the bottom of the picture. I tried printing from, PS, ID, Pr

  • Vista updates

    I was wondering if anyone knew why there has been so many updates to vista over these months at least? It seems every day I have to restart my computer after that an update is managed and just curious to know why?

  • Load the items of the combobox file

    Hello I don't know how to use correct components here, but I tried to load some drop-down list items file selector. I have the file, what has changed all the time, so I have to load those to selectro menu drop-down user every time that when the progr