Linksys wireless-g usb network adapter unable to detect the router using windows XP desktop PC

Similar Questions

• The network adapter could not establish the connection using the external ip address

  Hi team,

  Please look in the attached files.

  I installed db 11g on my desktop machine (Windows 7, with a local network) and then I created a data source connection in tomcat which was also in the same system and then I deployed my sample web application, everything works fine, I am able to access web applications.

  But once that I kept my system with external IP address (excluding local network of my company), oracle gives these following errors when tomcat start

  Here is the following URL will display the error during the startup of tomcat.

  The network adapter could not establish the connection,

  In these two files, listener and tnsnames ora ora, need to change the configurations if I change the Ip address of the system?

  even I tried my address keeping external Ip instead if host in these two configuration files, yet this does not work.

  any help would be greatly appreciated!

  Thank you.

  Because as I explained - your listener is listening on localhost only. localhost is never accessible to another machine.

  Stop your listener, change the listener.ora to listen to on the real machine name and start the receiver.

  In addition, your tnsnames.ora points to localhost...

  Stop using localhost, unless you only want things to work on the same machine.

• Device driver for LINSYS Wireless-B USB Network Adapter 2.4 cannot install or find the drivers for it?

  I can't find the drivers for a wireless - b network card to install?

  Hello

  1. What operating system is installed on the computer?
  2. You try to create a new connection?
  3. The computer is connected to the domain envirnoment?
  4. Do you have similar problems with drivers with other USB devices?

  Please provide more information on the issue so that we can better help you.

• Linksys Wireless - G PCI Network adapt with sharing SpeedBooster (wmp54gs) problems

  Trying to route internet even if the computer to my xbox but there's no sharing tab under the properties of devices. There are in my connection to the local network. just need to know how to turn on sharing. operating system 32 bit vista

  Yes, you can I understand it. I have uninstall my wirerless adper and then reinstalled. the sharing tab and then he got to work thanks anyway.

• front usb ports are unable to detect the large capacity external hard drive (250 GB)

  Hello
  I have 250 GB external hard drive, whenever I connect to my front usb ports it detected, but pen drives, are to detect flash drives, one of my friends said that you need to update my bios & I here is the motherboard.

  motherboard: Mercury 945gcm

  It is possible that the USB 1.1 and not 2.0 ports that can explain the problem.  In addition, sometimes USB ports out enough power to run an external device that is not powered separatelly.  I don't know if updating the BIOS will help, but if there is an update available for your system (and it MUST be for your system - big bad can occur if you install the wrong BIOS so get with the computer manufacturer, and speak to a representative to confirm that they are appropriate for your system AND your version of Vista) then by all means install it and see if that solves the problem.  You can also get the updated drivers for the motherboard manufacturer, at the same time and see if that helps as well.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Linksys wireless-G USB wireless network monitor

  I have a home desktop computer I recently purchased at my friend that everything was already on the computer when I bought there including linksys wireless-G USB Wireless network monitor and I don't know much on the network or the settings of all but I not the reason why it is installed on a home desktop computer when im not not with wireless connection. I would like to know if it binds another computer to mine than in sharing or something?

  Hello

  Linksys Wireless Network Monitor is a software provided by Linksys. If you do not have a Wireless Linksys router/adapter, you can safety uninstall the same.

  For further assistance on issues related to Linksys, please contact Linksys.

• Wireless network adapter cannot connect to the wireless network

  When I start my PC HP TouchSmart it does not recognize my wireless network.  It says wireless network adapter cannot connect to the wireless network and the details said network adapter "Local network connection * 16 ' does not work properly. The strange thing is that if I leave my computer for a few minutes, then restart it twice, it recognizes the network and starts working. Frustrating is that I have to do this everytime I turn on my computer.  It takes at least 10 minutes of starting and restarting my computer before it will recognize my wireless network.   Any help?

  Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• Just installed a vigin superhub my portable computer that has a network adapter and connected to the hub, but I get the message cannot connect without certificate

  wireless problem

  just installed a vigin superhub my portable computer that has a network adapter and connected to the hub, but I get the message cannot connect without a certificate, any siggestions would be welcome

  Tom

  Hello, Bill Bates,.

  I would say to contact support with their router blank:
  https://help.virginmedia.com/system/selfservice.controller?configuration=1002&PARTITION_ID=1&TIMEZONE_OFFSET=&usertype=1&VM_CUSTOMER_TYPE=&cmd=ESCALATION_REQUEST

• "The network adapter is not correctly configured to use the ip Protocol" problem on Vista

  Hello. My PC has recently came across this problem "the network adapter is not correctly configured to use the ip Protocol", every time I click on diagnose & repair. I don't know how to fix it. Please help, thanks in advance. Magic

  Hello X-x_MaGiC_x-X,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Try the rest of the stage in this article:

  System restore points are created automatically when the following occur:

  • When you install a new application or driver.
  • When you uninstall or install some programs.
  • When you install new updates
  • Automatically on a daily interval
  • Manually by creating a.
  • If you choose to use system restore to restore to a previous restore point, System Restore creates a new restore point before you restore a previous state in case something goes wrong. If you are restoring to a previous state in Mode without failure, a restore point will create for the current state.

  So that the restoration of the system to work, you must have 300 MB of free space for each hard disk that monitors the system restore. System Restore will also use up to 15% of disk space on each disk that it monitors. That hard disk space runs out, older restore points will be deleted as newer ones. It is also important to note that you must be logged in as an administrator in order to use the system restore. Now that you understand the basics of the system restore, you must continue to the next section to learn how to use it.

  Restore Windows Vista to a previous state

  In the case of a problem on your computer that cannot be solved by normal means, you can restore your computer to a previous working state. To do this, you need to start restoring the system so that you can choose the restore point to restore. If you currently have Windows Vista boot problems, you can use the system restore in Windows recovery environment. Instructions on how to do it in this tutorial can be found: System Restore using the Windows Vista recovery environment.

  If you can connect to Windows Vista, you must follow these steps.

  1. Close and save any documents that you have opened.
  2. Click the Start button to open your Start Menu. The Start button looks like this:
  3. When the Start Menu open click on the menu option all programs.
  4. Click once on the Start Menu Accessories group.
  5. Click once on the System Tools Start Menu group.
  6. Click once on the icon of the system restore. After you click the icon, if a user account control window opens, click on the button continue.

  You will now be on the screen as shown below in Figure 1 system restore. From this screen, you can specify the restore point that you want to restore.

  1 screen of system restore

  By default, Vista will be already selected the restore recommended option. This restore point is one followed a new pilot program, or update has been installed. If you do not want to use this restore point, you can click on the button next to start the restore process. On the other hand, if there is a more recent restore point that you want to restore you should select choose a different restore point and press the next button. This will bring you to a screen, as shown in Figure 2, which contains a list of all available restore points that you can restore.

  2. the list of available restore points

  You must select the restore point that you want to restore, and then press the button next to start the restore process. Vista will display a window showing your selected restore point and asking you to confirm that it is that you want to restore.

  3. confirm the selected restore point

  If you want to select a different restore point, press the Back button. Otherwise, you can press the Cancel button to exit the system restore or the button finish to begin the restore process. If you have selected finish, Vista will display a second prompt asking you to confirm that you want to continue restoring.

  4. second Confirmation

  If you are sure you want to restore, then press the Yes button. Vista will now log you off the computer and start the system restore process, as shown in Figure 5 below.

  5. restoration of a restore point

  When the restore is complete, your computer will be restarted and when Vista starts it backup will be restored to its previous state. When you open a Vista session for the first time after the restore, you will see a message indicating that the restore was successful.

  6. system restore was successful

  If there are problems with your computer because the last restoration, you can return to your previous settings to ebb in the system restore utility and select Undo system restore by pressing the next button.

  7 undo the last system restore

  Your computer should now work correctly again.

  With the help of the restoration of the system in the Windows recovery environment

  Manual creation of Restore Points

  As mentioned previously, it is also possible to create manual restore depending on points. Some popular designs to create manual restore points are when you have your computer configured perfectly and I would save the State in case of problems in the future. To create a manual restore point, you must follow these steps:

  1. Click the Start button to open your Start Menu. The Start button looks like this:
  2. Click on the control panel menu option.
  3. Click the option menu system and Maintenance.
  4. Click on the system menu option.
  5. Click on the System Protection in the list on the left.

  You will now be at the System Protection tab in the system control panel. This tab allows you to enable and disable the system restore as well as making the new manual restore points.

  8. the System Protection tab

  To create a manual restore point, you must click on the button create. When you press this button a prompt asking you to give a title to this manual restore point.

  9. Enter the manual restore point title

  Type a title for the manual restore point and press the button create. Vista will now create a restore point manually and once finished, post a notice that it was created successfully.

  10. Manual restore point has been created

  Now that you have finished doing the manual restore point, you can close the system window.

  Try to download the correct and up-to-date drivers.

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I/o error: the network adapter could not establish the connection: connection to oracle database

  Hello

  I am not able to connect to the Oracle SQL developer database. I said / 0 error: the network adapter could not establish the connection.

  I started the listener, but what I see is, it points to a different IP address instead of the IP address of the host. How to change the name of host or IP address.

  I see that it points to the host name in listener.ora.

  Attached the screenshot

  

  Can someone help me solve this problem?

  Thanks in advance

  What he says is the listener.ora file is not necessary to start the listener.  If you rename, then start the receiver, then start the db, after a minute or two, the db should automatically register with the listener and then you can make a tnsping or otherwise connect to the database through the listener.

  I'm not entirely sure what's going on with your image, but I can't help but wonder if somehow something is not what you expect with the investigation period, whenever it starts.

  So use lsnrctl status lsnrctl services to see what the listener is the situation and tnsping and ping from the client to see what he thinks.

• IO error: the network adapter could not establish the connection

  I'm configuration 11.1.2.3 on Windows 2008 using the Oracle database and when I try to configure connection services database and shared registry associated with the House I get the error "IO error +: the network adapter could not establish the connection +" all by filling in the details of the database. Windows Firewall is disabled, database is able to connect through SQL Plus am running, listening for the database service is running and the name of SID and the server have been provided properly. I even used localhost, apart from the name of the server providing the servename and ORCL is the SID. Any suggestions please?

  Usually, if I install on a Virtuelle/portable Windows machine that does not have a fixed IP or a dns entry I install a card closure before installing Oracle and have never had problems, it is established in http://docs.oracle.com/cd/E11882_01/install.112/e24186/reqs.htm#BABFHCJG

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Network adapter could not establish the connection

  Hello users,.
  
  I am facing a problem with my pool of connections configured in weblogic 9.2.3.0.
  
  The error is «network adapter could not establish the connection»
  
  Let me know why this error...
  
  -Milind

  Hey, Milind,

  better make you a telnet with your host name of the database, and the listening port.
  Maybe db url is wrong or database is down.

  -Kiss

• I had a the network adapter could not establish the connection...

  Hi guys,.
  I just downloaded and installed oracle 10g express in my installation of win 7.
  
  I have already created 2 tables and a single user and everything seems to be ok.
  
  but... There is a but! I tried to connect (using the ojdbc14 driver) NetBeans and I got an error "network adapter could not establish the connection.
  
  the connection string is:
  
  JDBC:Oracle:thin:@PCs:1251:XE
  
  (pcs is the name of my pc).
  
  This problem can be?
  
  Thanks much ;)

  Yep, that's what I told you, I tried with "xe" instead of "XE", but I still get the same error...

  What is the second mistake is the line you posted?

  Carefully COMPARE your line to mine

• Test failed: the network adapter could not establish the connection

  Hi friends,
  I am trying to connect my database of Jdeveloper 11 g (ADF) it will be by mistake
  Test failed: the network adapter could not establish the connection
  could u please tell me all the solutions
  Thank you and best regards
  Jocelyne.

  Usual causes are:

  (a) you have a kind of firewall between you and the DB that prevents the connection
  (b) you use the wrong host/port/sid for your database

  John

• Problem SQLDEVELOPER the network adapter could not establish the connection

  Hello I have a strange problem with SQL Developer (2.1.63) under Linux (Debian-testing-squeez/sid) version of the version: java java "1.6.0_16.
  Java (TM) SE Runtime Environment (build 1.6.0_16 - b01)
  Java hotspot Server VM (build 14, 2 - b01, mixed mode)
  
  Java is a debian .deb (sun-java6-jre, sun-java6-jdk).
  Whenever I try to connect to a database running on the remote server, I got error the network adapter could not establish the connection.
  (connection to base and also tnsnames connection)
  Sqlplus on the same machine works very well with the same connection settings, I also try the same SQLDEVELOPER version in the windows box and I had no problem with the connection.
  
  what I tried:
  1. in the course of running tcpdump eth0 dst db01x-i on the client and I don't got no network traffic going out of the box
  2.i have also tried tcpdump - neither eth0 host 192.168.3.9 and port 1521 on the server database to be sure, but also no traffic
  3. put the database server in/etc/hosts nothing change
  4. change the level of logging of the SQLDEVELOPER, but no significant errors
  5 different versions of the jdbc (ojdbc5.jar, ojdbc6.jar) connector
  
  I'd appreciate any help in this topic.
  BR and thx Thomas

  This problem is probably with java networks interacting with a new parameter to the default kernel in Debian. Among the bugs identified on this is here - [http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=560056]
  Two things to try, from various bug reports, are
  (1) "echo 0 >/proc/sys/net/ipv6/bindv6only ' and make this change permanent if it works
  (2) edit {sqldeveloper home}/sqldeveloper/bin/sqldeveloper.conf and add the line}
  "AddVMOption - Djava .net .preferIPv4Stack = true '.

  Jean Paul