Linksys wireless router is not my new Motorola modem Internet access

Similar Questions

• I recently purchaced a Netgear wireless router. I can't get any Internet access every time I connect to the internet.

  I recently purchaced a Netgear wireless router, I can't get any Internet access every time I connect to internet

  Hello

  Your computer connects to other networks wireless?

  Check with the Netgear support, their online documentation, firmware and ask for their
  Communities and Forums.

  NetGear
  http://www.NETGEAR.com/

  NetGear - Support & community
  http://support.NETGEAR.com/app/

  NetGear - Forums
  http://forum1.NETGEAR.com/

  -----------------------------------

  Have you checked the updates or re-installed the driver of your WiFi? Check with the manufacturer of the system (motherboard
  Manufacturer of custom systems) If an edge device and/or the manufacturer of the device.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• My Linksys wireless router is not all sites loading...

  It's quite frustrating because it took me a day or 2 perfectly set up my wireless network.

  I have finally the network set up after tackling various issues under this...

  In any case, my PC does not load some Web pages, and I can't really say why. It is sites randomly as WWE.com or IGN.com. And I can't connect to my ebay or AOL accounts either. Worse still is that some sites charge at halfway.

  IE, Firefox, and Google Chrome are all that.

  When I plug my computer directly into my modem, everything works fine.

  Any suggestions?

  Well, we found your problem.  Version 2 of material means that you can only use version 2 on the router.  You try to put the version 8 on a router to version 2.  According to the website 4.21.1 is the correct code for this router.

  You must download the latest firmware from version 2.  Try good firmware and let us know the status of the lights on the router when finished.

• New att/motorola modem with linksys wireless router connects local only!

  Trying to set up my linksys wireless router to connect to the internet. I get local only access. Just got the new modem and was able to connect to the internet with a wired connection. I had no problem with my router and adapter wireless during the last 3 years. They had to create a new connection broadband with the modem to local and internet access. My Wi - Fi is a new connection, local only. Any help would be appreciated so to get my connection wireless internet.

  Hello

  Let us work together to solve this problem.

  I ask you to follow these links and check if the problem is resolved:

  Set up a wireless router
  http://Windows.Microsoft.com/en-in/Windows-Vista/set-up-a-wireless-router

  Setting up a wireless network
  http://Windows.Microsoft.com/en-in/Windows-Vista/setting-up-a-wireless-network

  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-in/Windows-Vista/wireless-networking-frequently-asked-questions

  For more information:

  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/thread/4215a10d-08DD-404A-a43a-635a2f141f0d

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Please let us know the status of the issue.

• Cannot renew the IP (WPC54G card/Linksys Wireless Router)

  I think that the Wireless 'hardware' (is that correct?) in my laptop came out because I could use my Linksys wireless router until I installed a Wireless Linksys WPC54G card if I used an ethernet cable to connect with.  If the card is installed and I am connected to my network, I have an excellent signal but no Internet connectivity. I did the command "ipconfig" and renewed my IP address, but it appears as 169.xxx.x.x. I can't renew the IP address of 192.xxx.x.x.

  Does anyone know how to fix, or what is the problem?  I'm set up to ensure that the configuration of IP address automatically, so it has nothing to do with it.  Thank you.

  First check the settings on your Linksys router wireless... Follow this link (this must be done on a computer/laptop wired)...

  Once you know the SSID and the network/WEP/WPA key, then uninstall the adapter linksys and re - install...

  Uninstall the Linksys software menu programs... Re - install drivers insert the CD of Linksys install in your CD-ROM drive, when the welcome is displayed click on exit, connect your USB adapter now... When the Hardware Update Wizard window appears, click on install the software automatically (recommended) and then click Next.

  NOTE: The hardware installation screen may appear indicating that the adapter has failed the Windows Logo test. Ignore the window and click on continue to continue the installation because the adapter has been tested and it works with Windows XP. When Windows has finished installing the driver, click on Finish.Goto Control Panel and double-click on network connections... Right click on wireless network connection, and then select view available wireless networks "-If you see your network wireless in the list, the highlight by clicking 'single' on it now, click on the 'Connect' button below-if your wireless network is secured, it asks you to provide the network key - provide the wireless network key and confirm again in the confirmation box and click 'Connect'." It should work...

• DLink Wireless Router is not connected - indicates "unidentified network".

  original title: DLink Wireless Router is not connect when tried for the second time for the initial Setup on Windows Vista Home Basic SP-3

  DLink wireless router is not connect to my laptop. I don't use wireless sound, but the connection to laptop via cable ethernet for the initial Setup, the first time it connected and I did not any changes, because I couldn't time to set this up, so, I turned off on that day and triend to finish installing the next day to my surprise I see this router is identified as 'Unrecognized network' and when I used the CD that came with the router and he says no router not connected. I did something wrong here or its how Windows Vista Home Basic Edition will identify, can you please help me solve this problem.

  Hello

  Perform the steps from the link below and see if it helps.

  Windows wireless and wired network connection problems 

  Hope this information helps.

• My wireless router does not appear when I shoot to the top of my devices. It shows my fax, modem, scanner and a few others. But not my belkin wireless.

  My wireless router does not appear when I shoot to the top of my devices. It shows my fax, modem, scanner and a few others. But not my belkin wireless. And when I try to add it, the system can't find it. Please help

  Belkin support for your model, for installation instructions.

  Your router will not appear in the devices

• Router is not connecting to the modem so I can't get internet

  All right-_ - I tried a lot of things with this so I get irritated sorry. Here is my info I have a Linksys Wireless Router with SpeedBoost Firmware Version 7.2 WRT54GS (latest version). I'm trying to use it with a Sprint 645 series Modem. My IP address when you are connected to the router and the router connected to the Modem is 192.168.1.100 who my ISP said was ok to make it work. While it is just connected to my modem, it's the same thing except replace the 100 by 1. My ISP uses a measure of security where The Thing DHCP is 192.168.1.1 and so is the DNS server and default gateway and im not sure if this has something to do with it. I used the ping at a command prompt to make sure that I am connected to the router when its plugged up and it is. This is a new router. I have internet with Modem just perfectly. I tried to reset the router and that does not work-_-. I don't think it is important more because I tried to fix the many way people have told me and it didn't work, but I'll tell u in any case. When I put up the first router time I hung and lit everything at the beginning. Then I noticed that it says Run CD before to connect the cables... those who were not in the instructions but wtv... anyway resetting should have fixed or so I was told by other people on this forum. I use a laptop with Windows Vista, and I don't have access to a desktop computer in case I need a XD. I can connect to the router fine because I can access the Setup page... and I can connect wireless... The ONLY problem seems to be that the router will not connect to the Modem... for some reason of wtv-_ - I think that its because the entire security measure on the way to the DHCP and the DSN and the bridge are all 192.168.1.1, but that's just me. I'm sorry this is very long but I really want this problem-_ - I had this router for a month and becomes really annoying so please help . My ISP is Embarq. I ran the installation CD and I had all through the last step (standby router) after having connected the power supply to the wall for the router. Just, it is there forever and then says "error: 322 cannot find router or something like that." There are 3 steps to try to fix it. It says to make sure that the router is connected (it is), it is said also to make sure that u does not actually connect your old router, (I don't have a-_-) and then re-run Setup. and by the installer, I mean where u plug in all the cables in the right way. * sigh *.

  If you need anything else please ask.

  Your second post says "" ignore this "so I guess everyone thought that you set..."

  When you connect through your router that you have two instances of DHCP past... one is your DSL modem with router IP address on its WAN interface. The other is the router that gives your computer an IP address via the DHCP server on the router. The IP address of the modem gives your router is in the 192.168.1.0 network. Unfortunately, by default, the reange of Linksys routers LAN IP address is also in this range. For that to work, you must set your router 192.168.2.1 LAN ip, so that the LAN and WAN router interfaces are in different networks.

  To do this, unplug the DSL modem router, power it and your computer, and then connect the computer to the router by an ethernet cable. Turn on the router and the computer, and then go to 192.168.1.1. Change the LAN IP on router 192.168.2.1, save the configuration, and then restart the computer. Once the computer returns to the top, navigate to 192.168.2.1... you should be able to get to the router GUI configuration.

  Turn off the router and the DSL modem, connect the router to the modem via the Internet port using an ethernet cable, and then turn on the modem, then the router... you should be good to go...

• JWNR2010v5 (N300 wireless router) will support 100 Mbps connection speed internet in LAN?

  I intend to upgrate my internet connection speed of 60Mbps to 100 Mbps, but my provider says JWNR2010v5 (N300 wireless router) will not support 100 Mbps internet connection speed in LAN. Is this true? that which is the maximum speed of JWNR2010v5 for the LAN support. I don't mind the wireless speed, I use the maximum LAN. Thank you in advance.

  Your provider is correct. Either move your router to a router which supports! 000Mbps (MGI) LAN and WAN ports or stay at your current speed Interent.

  http://www.downloads.NETGEAR.com/files/GDC/datasheet/en/JWNR2010v5.PDF

• Wrt54g Linksys Wireless Router - connected but not display page

  Halo!

  I have a Linksys WRT54G wireless router - I was able to connect to the wireless connection, but there is no display of the page in the browser.

  What seems to be the problem here?

  TIA,

  wilardboi

  Please reset the router and reconfigure:

  1. hold the reset for 30 seconds button.
  2. then disconnect the Dungeon can now hold the reset button for
  another 30 seconds.
  3. plug back in the power and keep the reset button pressed
  for 30 seconds.
  4. release the reset button.

  Open the configuration of router with 192.168.1.1 page... White-username and password: admin

  To configure the wireless router.
  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Here the wireless network mode must be mixed
  -Provide any name in the name box of the wireless network (SSID), while
  without space between the two cases.
  -11 wireless channel
  - And wireless SSID broadcast should be enabled and then click

  Save
  Parameters.
  Please take note of the name of the wireless network (SSID) because it is the '
  Network identifier.
  For wireless security: -.
  Now click the sub-tab under wireless > wireless security.
  Change the mode of WEP wireless security
  Encryption must be 64-bit.
  Let the empty password, do not type in anything whatsoever.
  And under type WEP Key 1 in all 10 digits please. Click Save
  Parameters.
  Please note the 1 WEP key as it comes to the security key for the
  Wireless network.

• New wireless router does not have the printer works

  I am trying to help a friend who got a new O2 router provided and now it is installed its Deskjet F4500 no longer works, she has Vista Edition Home Premium, he did before another came, we tried the following support Web page without success please can anyone advise I guess there to with the new code being different routers , but I'm not technical, so don't know how to fix in this

  Replacement of your wireless router try now.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• I have a linksys wireless router and cannot get a full connection, I get the message - 'limited', or that the network keys do not match the linksys network who am I'm not fair?

  When I got the laptop - I was able to connect for about 3 days and then nothing - the yellow icon with the! inside he keeps display, or the router icon comes up - there is an internet connection availabe, but after going through all the steps to connect, nothing happens - my router works fine - I use it on another laptop and my desktop computer also works very well - different messages to arrive at different times on the problem. , but no diagnosis has been able to solve the problem.

  Hi Diane,

  In addition to the advice given, I would have you look at this article and check if the given steps help you correct the problem.

  Also, this might be handy in the future.

  Thank you!

• N of Linksys wireless router

  I just bought (WRT160N) Linksys Wireless N Router and also ordered a Dell Studio 15 laptop.  The laptop comes with a Dell Wireless 1397 802. 11 g Half Mini Card - how do I know if this is a router "g" or "n"?  I was told that all the g's work with g or n; but n only works with n?

  Sorry, but totally new for the whole wireless thing.

  
  

• Can connect to the wireless router, but not to the Internet

  Because I could not find this post, I published in my problem to

  Windows 7, connecting Local only, no Internet

  I think I described the problem a bit better here.

  I had a Gateway DX4300-17 with Windows 7 Home Premium for about six weeks. I connect to the Internet via a Netgear wireless router. My Internet connection dropped often, but I've always been able to reconnect to the Saturday. Since the start-up my computer Sunday, when I try to connect to the Internet, the system tells me that I am connected to the router, but there is no connection between the router and the Internet. I did a system restore to Friday, but it did not help. I searched the Knowledge Base and tried several things I found there. Running "sfc/scannow" indicates that all is well. I disabled the '6' Protocol (I don't remember the letters that were with this, but you probably know what I mean). This made no difference either. I thought I would ask for help here in the hopes of not having to restart the computer to the "hospital". That's a very different problem here barely a week. I need help, please.

  Hello Bill6009,

  Have you tried to boot your computer in SafeMode w/network to see if the problem persists?

  If so, try to perform a clean boot to see if you encounter the same problem.

  Please post back your results if we can help get your problem solved J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• LAN/Ethernet and wireless: can connect to networks, but shows "no Internet access.

  My workplace has cable/Ethernet and Wi - Fi.  I'm working on a laptop, plug it into a dock where my ethernet cable is connected.  Lately, I've been the startup object and the network will connect automatically (by default to connect to the local network, not for the wireless) but I get the point of the triangle/yellow exclamation on my network icon and displays "no Internet access.  Even if I get this warning message /, in fact, I can access the internet, but I can't access resources online through a program installed (such as, to access to the / insertion of a photo online by word or update a SharePoint Outlook calendar).

  In the past, I could connect wirelessly and work around this problem.  However, now my wireless connection does the same thing: it will connect, it displays the warning "no access Internet, I can access the internet, but not another program."

  I ran the resolution of problems and it does not identify the problem.  I've updated drivers, disconnected and reconnected networks - nothing seems to work.  Any ideas?

  Given that you encounter this work to your work network you really need to get your business COMPUTER Department to come and watch. As far as we know, there may be certain restrictions checked in your network permissions that must not checked. There is so much that can happen it is impossible to diagnose on an online forum.