Linksys WPC55AG, WPC54GX on wireless LAN, "connected to the AP, but Internet is not found.
Aloha, finally a forum thar actually solves the questions, mahalo.
These two wireless network adapters used to work properly with my DSL modem Westell 7500. Now, not so much.
I can wire Enet cards pcmcia network very well. I see my Brother MFC885CW wireless printer.
I'm on a gateway 9100, Win2k, Service Pack 4 running.
Linksys utilities show that I received, but do not send bits.
ipconfig gives 0.0.0.0 for the IP address auto configuration
I looked at the parameters of the DSL router, I don't see anything strange of course.
I also use wireless MAcBook Pro, airport, very good works. Hmm
Any thoughts?
The WPC54GX allowed ascii/text in box 1 WEP key, the WPC55AG has failed, only hex characters. However, after a search fast on another computer, I found an alpha decoder spell and managed to enter the WEP key in hexadecimal form, which I was able to confirm the MAc RPN calculator. Network cards do not seem to do the conversion correctly. I knew this because of my string of characters in the password.
Also, the dual-band has been assigned, when he did at all, a "unrelational", (best way to put it) the IP address of 169.254.81.145, instead of a 192.168... as I was expecting.
So with a little effort, both network adapters are now connected to the internet, and ipconfig shows well, as valid information.
Some once said that I spoke in hex, there you have it.
Thank you very much, I would say that the problem is solved.
Aloha
Tags: Linksys Adapters
Similar Questions
-
Microsoft Office (Word, Excel, Outlook) and printer slow when connected to the network, but quickly when not. with windwos vista, I have reintall the operating system, but still the same. Environment Network (Win server)
Hello
Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in Windows Vista IT Pro Technet Forums network.
http://social.technet.Microsoft.com/forums/en-us/category/windowsvistaitpro/
I hope this helps.
-
Wireless router connected to the provision of internet access no
I've just moved to a new place and have connected my router (WRT610N) wireless to my switch located in the smart panel in the basement (SE2500). Connect my ultrabook to the wall confirmed that the signal from the switch in the basement is sent up, but if I connect my router making wireless and connect to the wireless router I have no internet access. Someone knows what's going down? WRT610N
Yes, but you must properly configure the 2nd router. Wired is the only medium, 2nd router, disable DHCP, set router IP 192.168.1.2, connect you via LAN - LAN.
Go here for help.
-
WRT120N Wireless laptop connected to the router, but does not connect to internet
I have a HughesNet HN9000 modem connected to a Linksys WRT120N router. I have two desktop computers, both running XP Home, connected to the router via ethernet .5e cables and work perfectly. I have a laptop running Vista Home Premium, I am trying to connect to the internet via the internal wireless card. According to me, the laptop connects with the wireless router, as it connects but says 'Local only' - it won't let me access the router IP/control panel. I tried to reset the router / modem as well as the parameters of the laptop, but I keep getting the same question.
If I connect the laptop and the port #3 on the router via a cable .5e I can browse the Internet. But I need to be able to use the laptop throughout the House so electrician is not an option.
I found this article which directed me to this download , which worked. If your help is most needed. Thanks anyway.
-
Printer connected to the network, but it is not
Hello world. Could someone help me please. I bought a HP4620 to use with my IPad. He ok installed and connected to the network ok. The problem is that sometimes it prints and sometimes not. Print the Configuration page it says that it is connected, even if the iPad don't see. He gives in detail all the same in every situation.
When the iPad can't see the printer if the wireless hub is restarted everything goes back to as it should. 1 hour later and it went again.
Can someone help me please?I think that this is a business hub 3 if it changes anything?
-
Connection to the base tells me file not found...?
I just installed Dreamweaver CS3 and I'm moving from classic ASP to ASP.NET. I have an Access database that I work with and I am able to set up a connection to the database successfully. The test button shows successful and I can also create a recordset through DW links Panel. I create a SQL, I have test and I see the data correct, returned in the test on the display window. Everything looks great.
Then I simply remove the Recordset values in a table on the page and press F12 to preview in the browser. I get the following error:
------
Description: An error occurred during the parsing of a resource required to service this request. Check the specific error details of analysis following and modify your source file for appropriately.
Parser error message: could not load file or assembly 'DreamweaverCtrls, Version = 1.0.0.0, Culture = neutral, PublicKeyToken = 836f606ede05d46a' or one of its dependencies. The system cannot find the specified file.
Source error:
Line 1: < % @ Page Language = "VB" ContentType = "text/html" ResponseEncoding = "utf-8" % >
Line 2: < % @ Register TagPrefix = "MM" Namespace = "DreamweaverCtrls" Assembly = "DreamweaverCtrls, version = 1.0.0.0, publicKeyToken = 836f606ede05d46a, culture = neutra l" % > "
Line 3: MM:DataSet
Line 4: id = "rsPlayers".
----------------
Any information on what is happening here and how I can solve this problem would be greatly appreciated. Not having is not a very good start to my transition to .NET. :(
Thank you!
Nevermind, I figured it. Had to deploy support files. Sorry for the post.
-
Unable to connect to the server Apache (jrun server not found)
Hello
I have problems connecting Coldfusen 7.0.1 for Apache 2.2.2. on a WinXP SP2
If starting the wsconfig it say: no JRUN SERVER found on localhost
but it works, ist my tasks tell me (jrunsvc.exe and jrun.exe)
There is no firewall and port of the server jrun schud be 2930.
Thanks for helpThere were some problems on Apache 2.2 support, then the article was pulled from the site. It was published today. Support for Apache 2.2 is for Linux and Unix only at this time. The article is at http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=8001e97.
Ted Zimmerman
-
Constantly identified LAN connection, does not connect to the network or internet
I had a problem that suddenly appeared today after a reboot. As the title says, my connection to the local network is constantly switch between "id", "enabled" and "network cable unplugged." I can't connect to my network or to the internet. This is what looks like my ipconfig:
Ethernet connection to the Local network card:
State of the media...: Media disconnected
The connection-specific DNS suffix. :Wireless Network Connection 4 Wireless LAN adapter:
The connection-specific DNS suffix. : ftrdhcpuser.com
Link-local IPv6 Address...: fe80::ed16:e41c:9df2:e2eb %
IPv4 address...: 192.168.1.65
... Subnet mask: 255.255.255.0.
... Default gateway. : 192.168.1.1.Tunnel adapter ISATAP.ftrdhcpuser.com:
State of the media...: Media disconnected
The connection-specific DNS suffix. : ftrdhcpuser.comTunnel adapter isatap. {6254AE81-CEFB-477E-8E90-D451A4E96163}:
State of the media...: Media disconnected
The connection-specific DNS suffix. :Card tunnel Teredo Tunneling Pseudo-Interface:
The connection-specific DNS suffix. :
IPv6 address...: 2001:0:4137:9e76:c24:38bb:
Link local IPv6 Address.....: fe80::c24:38bb:b88e:49 b 7 1%
... Default gateway. : ::Tunnel adapter isatap. {095FED9F-64DE-4677-8CF8-A07B0B386792}:
State of the media...: Media disconnected
The connection-specific DNS suffix. :I tried to uninstall and reinstall the realtek drivers (both automatically and with the realtek official .exe file for current drivers). I tried to assign a static ip address for ipv4 properties, and I tried activation and deactivation of my ethernet controller on my bios, all with no success.
I have ping 127.0.0.1 to see if my material is bad and shut up just fine (0 packets failed). I tried to move the ethernet cords, and that did not help, then I connect my ps3 through ethernet to ethernet port of the same on my router and my router port-light lights up fine for that (but not with my pc).
I'm really at the end of my rope here. Any help would be appreciated.
Yes, I saw that... but I don't know what I have choice. This is clearly an ISP issue, and I've exhausted all my options on my end.
I finally managed to pass on to someone, and they send me a new modem/router... naturally it is the one and only free modem I get "for the life of your contract." But hey, if all goes well, if nothing else, he will have the ability to save and load a configuration file.
-
Window indicates that my new printer Canon PIXMA MG5220 Photo All in One Printer is compatible with my Dell Inspiron E1705, my printer prints so that connected to the computer but when I try to print wireless, it does not work. The printer is wireless and I have a wireless cable modem, what am I I lack to the printer wireless? Please advise.
Hi LouiseFarmer,
It seems there is a problem in the basic WIFI the printer setting.
I suggest you show the manufacturer's Web site to learn more about the drivers and the printer setting to print via WIFI.
-
Received my brother in laws laptop cannot connect wireless, although I can of my own laptop. Trying to connect through the new laptop, I do not see even my own network! What I'm missing here? I'm sure it's maybe something simple, but for the life of me! (When my brother-in-law used this computer, he only uses it through dialup (!), he lives in a remote area). With the help of Vista, and when 'Management of connections' I see my network...
original title: cannot connect wirelessHello
· You get the error message?
Method 1:
I suggest you update the drivers for hardware connected to your computer on the Web site of the manufacturer check if it works.
Updated a hardware driver that is not working properly
Method 2:
Also, follow the steps in troubleshooting section and check if that helps:
In the Windows wireless network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows
Check out these links and check if that helps
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-wireless-router
http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network
See also:
Solve problems with computers not appearing is not in the network mapHope this helps
-
Original title: connection problem
Hello! I recently did a clean installation of Windows 7 Professional 64 bit and I use a wireless USB adapter. Windows says I am connected to the router, but I have no internet access, and I have this yellow on trinagle. Work of all my other Windows 7 PCs, but this one. Could someone help me? Thank you!
Hello
Welcome to the community forums of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue. I see that you are unable to connect to the wireless network after you perform a new installation.
I suggest you to consult the steps described in the article:
Method 1:
You can try the steps in the link and check.
You can update the driver of windows 7 on the manufacturer's Web site.
Method 2:
You can remove and re-create the wireless network connection, follow these steps:a. Click Start, type ncpa.cpl , and then press on Enter.
b. right click on your wireless network connection and then click Properties.
c. click the wireless networks tab.
d. under preferred networks, click your Wireless
network and then click on remove. e. click on view Wireless networks.
f. under management of the network, click refresh the network list.
g. under Choose a wireless network, click the wireless network to which you want to connect, and then click Connect.
Method 3:
If the steps above don't you can uninstall and reinstall the NIC drivers and check with the question.a. click on Start menu, in the Search tab type devmgmt.msc and press ENTER.
b. right click on network adapters and click Uninstall and restart the computer.
c. after rebooting, install network cards and check with the question.
Method 4:
You can temporarily disable the antivirus and firewall on the computer and see if it helps:Enable or disable Windows FirewallNOTE: Turn off Windows Firewall might make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
You can see the following link to disable the Antivirus installed on your computer software.Disable the anti-virus software
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-softwareNOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacksPlease follow these recommended steps and post if you still experience the problem. I'd be happy to help you further. -
Make an ad-hoc and share the LAN connection to the Wi - Fi
How can I get the tab share for my mini HP laptop so I can make an ad-hoc and share the LAN connection to the Wi - Fi so I can get internet to my iPhone. (otherwise the laptop do a hotspot) window 7 I think I
Hello
I suggest you to see link and check if it helps.
Set up a computer-to-computer (ad hoc) network: http://windows.microsoft.com/en-US/windows7/Set-up-a-computer-to-computer-ad-hoc-network
Hope this information is useful.
-
Wireless keyboard connection after the update of El Capitan
Hello
My wireless keyboard freeze constantly or delayed response of the keys after waking from sleep.
I never had this problem before the update. And it happened for a while.
I have tried resetting SMC and have test the AHT but still does not solve the problem.
Users there had the same problem?
Hi wsthong,
I understand that you have a problem with your keyboard doesn't work does not correctly after an update. Let's see if we can understand what is happening.
The first thing that comes to mind is that it could be interference from other sources that you might not be aware of, things like the microwave ovens and cordless phone. Take a look at the article below for more information on this to see if it solves your problem.
Potential sources of Wi - Fi and Bluetooth interference
https://support.Apple.com/en-us/HT201542Nice day
-
Wireless printer connects to the laptop, even though she has worked in the past.
My printer HP Officejet 6700 Premium connects to my laptop HP Pavilion 15, although he has worked in the past. Other computers around the House connect to the printer and print documents without any problems. When I go to print from Microsoft Word, it says my printer as offline.
I tried to remove the printer from my devices and printers list (so that I could try to reconnect the printer), but he is not leaving the list after clicking "remove hardware".
Could someone help me please you troubleshooting? I really need to be able to resume printing my documents for the school.
Thank you!
Hi @OfTheFalls
I'd love to help you reconnect your 6700 printer and computer.
I suggest using the HP print and Scan doctor first of all, it can solve many printing and scanning errors, network or USB problems, driver problems and conflicts of port connection. Click here to download and run the print and Scan Doctor >www.hp.com/go/tools
If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to identify the key and check mart are in the green circle.
- If you see only the Green checkmarks ( ), the tool did not find any problem.
-
Original title: Win7 64 bit, connects to the router but no internet access.
Help! Windows 7, XP Home Edition Premium, 64 bit, connects to the router and I can access the network. However, I can't access the internet. PC was working fine until a few days when I was using IE Explorer and I suddenly got the error "page not found". This pc internet connection uses the onboard network controller. I rebooted the pc and used the option "safe mode with network. The pc worked fine and I had access to the internet. I restarted the pc and still no access. I tried a usb wireless adapter. No luck. I have not installed updates or software recently. My other 2 PC works fine. I tried to use the network troubleshooter and he could not find any problems.
Hello
- Have you made changes on the computer before this problem?
- What antivirus application do you use?
I suggest you try these methods and check the status of the issue.
Method 1:
Keep the computer in a clean boot and check the status of the issue. If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem. Continue with the remaining steps to pin-point on the third party service. After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.
http://support.Microsoft.com/kb/929135
Note: Please go up to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem
Method 2:
I would suggest trying the following steps and check the status of the question.
a. open Internet explorer.
b. click on tools, then on Internet options.
c. click on the Connections tab.
d. click on LAN settings.
e. uncheck the option use a proxy server for your LAN .
f. save the changes by clicking on apply and ok.
Method 3:
Configure Internet Explorer to disable simplified HTTP error messages and check the status of the issue.
a. on the Tools menu, click Internet Options.
b. on the Advanced tab, in the browsing section, disable friendly HTTP error messages display check box and then click OK.c. close Internet Explorer.
d. restart Internet explorer and check the status of the issue.
Maybe you are looking for
-
How to merge all my email accounts so that all messages appear in the pane of a message?
With Outlook Express, messages from all accounts appeared in the part of my message. How to configure this in Thunderbird?
-
How to boot from CD with no os on hardrive and I have no floppy drive
-
Why it produces error when I add a scroll bar to a stripchart?
I want to add a horizontal scroll bar to a chart of the band. I have create a checkbox on the Strip Panel. If it is enabled I put SetCtrlAttribute (psmpanelHandle, PSM_PANEL_ACHART, ATTR_STRIP_CHART_PAUSED, 1); and I use GetCtrlVal(psmpanelHandle,PSM
-
Repeatedly offered four updates of windows.
Original title: MICROSOFT UPDATES I would be very happy if you would help solve me the following problem. I run WINDOWS XP PROFESSIONAL with service pack 3, every time, for stuck on threeweeks, I start my computer the startup toolbar includes the
-
access denied to the Cookies folder in vista
Why am I denied access to my cookie folder. I try to open and im denied. I also tried to go directly to her, but it is not shown. went to the folder option and set to show system and hidden. still can not see it. I had a few cookies adt someware and