Linksys WRT320N problems. Keep losing ground day after day

Hello

I have a nasty problem and I absolutely had no idea on how to solve this problem.

A couple of days, I installed my new router WRT320N in combination with 50mbit Ziggo speed (internet provider from netherland)

On the first day speedtest.net always give mbit 47/48 down and 5 Mbps up.

But after a few days, the router maintains a fall and a fall and abandonment until the subject of 2 Mbps.

Now, I have reset the router and also restarted the modem for the new software etc but still nothing works.

Ive also tried to reset the router to the parameters of Carillon and that worked... until he went down every day.

I also took some tips from this forum that was MTU setting to 1350 manually instead of 1500 automatic and it worked... until a few days have passed and new ive got 10mbit today.

I am naïve and in desperate need of your help!

Setting keep passing my router 50mbit speed to almost zero in a few days at a time?

Thank you in advance!

Rens Voeten

Change every time I pass the MTU to 1500, and then back to 1350 is the jump from speedtest.net meters up still crazy 50mbit.

But if I let it, it will decrease again day after day.

Thank you for your advice.

Ive done what you say and also disabled UpnP and I think it did the trick.

Ive got constant speeds to 48mbit/s (50 in total) and they have not fallen so far.

Verify speedtest.net during lunch again tomorrow and will post here if it is down again.

Greetz

Rab

Tags: Linksys Routers

Similar Questions

  • C4780 keeps losing wireless connection after 24 hours

    I think I've tried almost everything this mentioned on this forum...

    Sitecom router dhcp mode, range 192.168.1.40 - 192.168.1.80, the firewall is disabled

    printer is powered 192.168.1.100 (static, after having the same problems with Dynamics)

    Gateway and dns remains empty. Subnet 255.255.255.0

    Security: WEP

    Already changed the channel radio from 6 to 11, but it does not help.

    Anyone have any idea?

    Kind regards!

    Change from WEP to WPA or WPA2.  WEP is no longer safe (..., can be broken with freeware in about 10 minutes), and can cause this kind of connectivity issues.

    Run a wireless network Test when / if the printer loses connection next time.  Let me know what it says.

  • Keep losing the customization of controls after the new start or updates [firefox 24/25/26] 'customize navigation as bookmarks, back buttons and reload '.

    Since the 24 FF and also in the 25 & 26 it keeps losing the customization of controls after new impetus or updates.

    I always do this: 'Customizing the navigation like back, home, bookmarks, & reload buttons' - http://mzl.la/LqHj2n.

    When I updated from 23-24/25/26 or have a crash FF in one of these versions, the customization is default return. I do not have to repeat this every time!

    What is your operating system?

    You can check the problems caused by a corrupt localstore.rdf file.

  • Time Machine every few weeks stopped backup because it must create a new backup. 9 to on MY Cloud EX2 takes 4 full days. Crazy to keep losing all backup dates.

    Time Machine every few weeks stopped backup because it must create a new backup. 9 to on MY Cloud EX2 takes 4 full days.

    Crazy to keep losing all backup dates

    Message reads

    "Time Machine has conducted an audit of your backups on"WDMyCloudEX2". To improve the reliability,

    Time Machine must create a new backup for you"

    Click Start a new backup to create a new backup. This will remove your existing backup history. This may take several hours.

    Click Back Up later to be reminded tomorrow. Time Machine won't perform backups during this period.

    Is - this common, no way to stop it?

    Just take a brief look at WD for 'My Cloud EX2' site, they list El Capitan as an operating system supported. Mavericks is the latest OS listed. Probably you need to contact Western Digital support.

  • Anyone know when will fixed the problem of material with the "IPAD PRO"? The question that keeps it from starting after the load.

    Anyone know when will fixed the problem of material with the "IPAD PRO"? The question that keeps it from starting after the load.

    According to Apple, it has been addressed in the latest update of the iOS, iOS 9.2.

  • my HDD keep losing free space, I lose about 1 GB per day

    my hard drive keeps losing free space I'm losing about 1 GB per day

    Did you recently do disk cleanup?

    http://www.Vistax64.com/tutorials/76073-disk-cleanup.html

    The tutorial is really made up of 2 parts:

    From #1 to #11 on "ordinary" disk cleanup This will give you in disk space.
    #12 at the end is on more Options. It is mainly to erase all of your points except the most recent restoration. This will give bring you a ton of disk space. There is a downside to this. You have more 'old' restore p [stated to fall back until several restore points are created. So make sure that your computer works correctly before you use more Options.

    Another suggestion would be to install CCleaner.
    It's a free program and it will help you to remove unnecessary files and recover disk space.
    I use it regularly.
    Attention, do not touch the registry option.
    If you are interested, here is the download link:

    http://www.filehippo.com/download_ccleaner

  • I was not able to open my my Adobe Illustrator application after update. He says there are a few problems with the preference but after following the instructions, Illustrator still does not work and it keeps giving the samei question. Help, please.

    I was not able to open my my Adobe Illustrator application after update. He says there are a few problems with the preference but after following the instructions, Illustrator still does not work and it keeps giving the samei question. Help, please.

    I think you are talking after upgrade to CC 2015 you're not able to launch I. Also, I believe you speak for read only matter of preference.

    After following the instructions please do not launch Illustrator and check your file preference if the permissions have been set correctly. A good way would be to get inside the preferences folder and then try to create a file manually. If it succeeds, please write to [email protected]

    A few external links to help you set permissions:

    MAC

    OS X Yosemite: set permissions for items on your Mac

    WIN

    Set, view, change, or remove permissions on files and folders

    r-and-file-permissions/465f2b42-63dd-4486-8dd1-c870290efeed http://Answers.Microsoft.com/en-US/Windows/Forum/windows_vista-Files/How-do-i-change-folde

    Kind regards

    Ashutosh

  • My iPhone 5 c keeps losing the pairing with my brand new Nissan Juke

    My iPhone 5 c keeps losing the pairing with my new Nissan Juke. I tried to delete if the car and the phone and repair. He works for a few days then it happens with defective pairing on the car screen. I then go through the whole process again to make it work. Can anyone help?

    Howdy Kevin,

    Welcome to Apple Support communities.

    As I understand it, there is a problem with your iPhone 5 c does not connect to your car radio after using it for a few days. The article below the link provides a lot of information and some general troubleshooting tips that may be able to help you solve this problem.

    Get help to connect your iPhone, iPad or iPod touch with your car radio - Apple Support

    If you use Bluetooth

    1. Consult the user manual of your car stereo to get the procedure to a Bluetooth device.
    2. On your iOS device, drag up to open Control Center, then press ontwice to turn on Bluetooth and turn it back on.
    3. Restart your iOS device.
    4. On your iOS device, Cancel the twinning of your car radio. On the screen of your car désapparier your iOS device and any other device. Restart your car and your iOS device, then pair and connect again.
    5. Update your iOS device.
    6. Install the updates to the firmware of your car radio.
    7. If you still not connect, contact Apple technical support.

    So long.

  • keep losing internet connection on PC laptop of HP Pavilion g6

    As above, I keep losing internet connection on PC laptop of HP Pavilion g6 and often have to go out to get it back. I had the laptop for over a year and have had this problem from day one. There is often no connection at all. I'll be on a a Bab beautiful site and then the next it just freezes. Sometimes clicking on dissconnect then reconnect will solve the problem. But most of the time that I have to turn it off, wait a few minutes and then restart your computer. It does not always if I have to do it again. As above, I have had this problem from day one. When I got it home it has no connection to be seen. I took it streight back to PC world, they passed it and connections were there. When I got home, turned on others were there, but not my own. After the market again was mine. After that, it was OK for a week or two, then I started having the problems that I have now. My son sitting about three feet from me on his laptop has no problems at all so I know that it is the laptop and not my router. My wife, my son and my phone are also on the internet through the router when it fires. Now and then it will be OK for a few days, but most of the time it turns off several times a day. It's a good pain as each else with the laptop is great.

    Hi @wiggie ,

    Thanks for your post, I will do my best to help.

    What trust do not forget it is very helpful if you include your exact model of HP laptop and operating system.  HP produces many models of Pavilion G6

    How can I find my model number or product number?

    It sounds as if after a period of the computer is the ' turn off.

    You would check the Please this setting.

    Go to the Device Manager

    Click on the adpaters network to expand the list

    Right-click on the network adapter and choose Properties

    Click the Power Managerment

    Please uncheck allow the computer to turn off this device to save power if it is checked.

    Repeat the above for all types of additional network adapters.

    I hope this helps.

  • My driver support does not work all the time, won't let me connect, keeps losing internet connection.

    * Original title: SUPPORT of the PILOTS LOSE INTERNET.

    My driver support does not work all the time, won't let me connect, keeps losing internet connection.

    What do you mean by "driver support?

    If you have installed one of these offers of support software driver, you have installed malware.  The vast majority of them no useful software and installing a lot of malware on your computer.

    The drivers are not the soft thing you should normally be updated.  I recommend the updated drivers only in the case of a problem that has to solve, and it's rare.

    Is the ONLY source, you should consider for driver updates or OEM support site.  Even those who sometimes go way overboard in trying to update the drivers.  The latest Dell systems are equipped with updated software that checks for new updates every day.   In most cases, drivers are rarely updated after the first year of a product.

  • Why I keep losing internet connection?

    For a long time, I keep losing the internet connection.

    I lose the connection when:

    • I move to a different location around the House
    • Another computer is turned on
    • I just returned from a sleep mode

    Why is this? Because of the router?

    Help, please! Thanks in advance!

    Hello

    Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And
    I would update your WiFi drivers on computers. How you are positioned in the router?
    Are there obstacles in the path?

    Actually try updating your driver and disabling the network logon.

    Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver-
    Note the version - click on update driver (can't do anything as MS is far behind certifying)
    drivers). Then right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver
    stack.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    Download - SAVE - go where you put it - right click – RUN AS ADMIN.

    You can download several at once however restart after the installation of each of them.

    After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
    (Those become your fonts of rescue system manufacturer).

    Repeat for network (NIC) card and is a good time to get the other updated drivers Vista
    love the updated drivers.

    I would also turn off auto update for the drivers. If Windows Update suggests a just HIDE
    because they are almost always old, and you can search drivers manually as needed.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ------------------------------------------------------

    Make sure you know the details of connection to your wireless router - SSID and password.

    You lose connection when you do and have to redo your logon.

    Control Panel - Network & Sharing Center - right, click custom - defined network
    Locations page - down left click on merge or delete locations networks - REMOVE ALL THE
    instances of your network (and others, you no longer use) - REBOOT. Start - connect
    To connect to the network.

    -----------------------------------------------------

    Check this box:

    Strange problem with Internet under Vista
    http://www.catonett.com/blog/archives/194

    Windows Vista cannot obtain an address IP of certain routers or from certain non-Microsoft
    DHCP servers
    http://support.Microsoft.com/kb/928233/en-us

    ----------------------------------------------------

    And:

    Network connection problems
    http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • I keep losing internet access, then he retrieves himself. This has happened 6 times in the last 15 minutes

    I look at homes for sale, and I keep losing my internet access. Troubleshooting cannot find something wrong and refreshing the page where I left.

    Hi DebbieHanson,

    ·         What version of IE are you using?

    ·         What is a wired or wireless?

    ·         How long have you encountered this problem?

    ·         Did you of recent changes to the computer?

    ·         Are what store you referring?

    I suggest you try to check the computer in clean boot state to see whether any third-party program is causing the problem.

    See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  • I keep losing my connection to the Media Center on my D-Link DSM 750

    I keep losing my connection to the Media Center on my D-Link DSM 750 when you try to view the video library. Music photos and everything else works fine?

    Hi Ghostrider457,

    Are a. When you facing this problem?

    B. you get errors?

    C. recent changes made on the computer?

    Method 1

    Try temporarily disabling the firewall/antivirus software and check if the problem persists.
    Turn on the firewall / antivirus after you check the status.

    Method 2: new user account

    1. open user accounts by clicking the Start button, clicking Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.

    2. click on manage another account.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    3. click on create a new account.

    4. type the name you want to assign to the user account, click an account type, and then click on create an account.

    http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

    Try and tell us the result.

    Bindu S - Microsoft Support
    Visit our Microsoft answers feedback Forum and let us know what you think

  • I keep losing my Firefox toolbar as well as my other toolbars.

    I keep losing my Firefox toolbar, so I can't go to my favorites, tools etc. Today, that I have no toolbar at all.

    If you do not have a tab bar, just the page content from the corner:

    Could check you that Firefox did not pass to display full-screen? You can change whether the use is:

    • Hit F11 on the keyboard
    • Drag the mouse all the way to the top of the window and look for the tabs and toolbars to drag down, right-click on an empty area of the tab bar > exit full-screen Mode

    If it's a regular window with a bar of tabs but no toolbar:

    This may be due to an incompatibility with one of your extensions, or a corrupted data file.

    If you press the ALT key, or press F10, can call you the classic menu bar (File, Edit, View...)? If so, try Mode without failure of Firefox. It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.

    On the Help menu, select Restart with disabled modules

    Not all add-ons are disabled: Flash and other plugins will run

    After stops in Firefox, a small dialog box should appear. Click on 'Start mode safe' (not reset).

    You have your toolbars in Mode safe?

  • mouse for my IMAC Apple keeps losing connection.

    My apple mouse keeps losing connection. I changed the batteries, which show all the power, so I don't think that's the problem. When the mouse loses the connection, I have to keep clicking on it until the connection comes back. The mouse is defective?

    Your answer is probably:

    If your Apple wireless mouse, keyboard or trackpad doesn't work as expected - Apple Support

Maybe you are looking for