Lint trap fails with the Classes of LV

LV2013, LVRT 2013, Win7

I'm working on a large (1600 + screw) of the project, for a few years now.

Long ago, I created a program of "lint filter.  Here's what it does:

1... make a list of all the files in all of the LLBs in the project folder and subfolders.

2... to read a file of EXCLUSION and remove screws specified in the list.

3 open... all HAND screw for programs (one by one).

4.. remove this VI from the list.

5... find out all subVIs called by this main VI. Remove them from the list.

6... find out all subVIs called by THESE subVIs.  Remove them from the list.

7... repeat 3-6 until all screws are covered.

All that is left is "Lint" - live have any appellants.  If it's a dynamically called VI, I put in the EXCLUSION list and run again.

The point is the discovery of false starts and screws I created, but not a not end up using.  I can then delete those and keep the code free of lint.

Everything works beautifully for years, until I started to use objects (LV).  For the last month, I was including a descendants of class and severel parent in the project.

The project works.

However, it has generated a lot of fluff.  Some of the old code has been replaced, and I made a few false starts, he didn't screw is not used.

The problem is - the lint filter reports now over 200 lint screws, some of them I know are really. (If I remove one, the main VI is broken).

I traced the problem to the fact that the Classes appear to be invisible.

Here's some code that continues the screw and subVIs, etc.. :

The problem is - the exit CALLED this property node does not list all the LVCLASS elements, or any screws that take an entry CLASS.

Even a simple test cases, and with a constant of CLASS and a CLASS VI, will not be displayed.

Any normally called VI is in the list, but if it is related to a class, it is forgotten.

Anyone have any ideas on how to make lint filter works in this case?

Technical support comes through (thanks, Chris!) with a response:

Given a reference of VI, there is a method (call the node) called GET VI RELATIONSHIPS that can be used.

There are all sorts of options, which must INCLUDE all OVERRIDES THEM.

I guess that will always leave a substitution that I wrote, but never actually call.

Yet, this is a great step in the right direction, and it is MUCH faster than through the chain myself.

Tags: NI Software

Similar Questions

  • patch p11879896_112020_Generic failed with the missing req for error computer

    Hello
    Apply the fix for issue on Linux 32 with

    opatch apply - invPtrLoc /u01/app/oraInventory/oraInst.loc

    has failed (with message
    Patch 11879896 : Required or missing components: [oracle.sysman.console.db, 11.2.0.2.0]),

    debugging follows below. Any idea?

    Thank you.

    Anatoliy

    _osArch is
    /u01/app/oracle/product/11.2.0/home11gR2/jdk/bin/java -mx96m -cp /u01/app/oracle/product/11.2.0/home11gR2/OPatch/ocm/lib/emocmutl.jar:/u01/app/oracle/product/11.2.0/home11gR2/oui/jlib/OraInstaller.jar:/u01/app/oracle/product/11.2.0/home11gR2/oui/jlib/share.jar:/u01/app/oracle/product/11.2.0/home11gR2/oui/jlib/srvm.jar:/u01/app/oracle/product/11.2.0/home11gR2/oui/jlib/orai18n-mapping.jar:/u01/app/oracle/product/11.2.0/home11gR2/oui/jlib/xmlparserv2.jar:/u01/app/oracle/product/11.2.0/home11gR2/OPatch/jlib/opatch.jar:/u01/app/oracle/product/11.2.0/ home11gR2/OPatch/jlib/opatchutil.jar:/U01/app/Oracle/product/11.2.0/home11gR2/OPatch/jlib/opatchprereq.jar:/U01/app/Oracle/product/11.2.0/home11gR2/OPatch/jlib/opatchactions.jar:-DOPatch.ORACLE_HOME=/u01/app/oracle/product/11.2.0/home11gR2-DOPatch.DEBUG=true-DOPatch.RUNNING_DIR=/u01/app/oracle/product/11.2.0/home11gR2/OPatch oracle/opatch/OPatch apply - invPtrLoc /u01/app/oraInventory/oraInst.loc
    Citing O Patch 11.1 .0.6.6

    Setup Oracle interim Patch version 11.1.0.6.6
    Copyright (c) 2009, Oracle Corporation. All rights reserved.

    CmdLineParser::initRuntimeOptions()
    Audit on the class oracle.opatch.opatchutil.CmdLineOptions$ StringArguments
    A list of the fields defined in the class oracle.opatch.opatchutil.CmdLineOptions$ StringArguments
    There are 7 fields defined in this class.
    Add option "fp".
    Add option "dp".
    Add option "fr".
    Add option "dr."
    Add option "mp".
    Add option 'phbasedir '.
    Add option 'phbasefile '.
    Audit on the class oracle.opatch.opatchutil.CmdLineOptions$ BooleanArguments
    A list of the fields defined in the class oracle.opatch.opatchutil.CmdLineOptions$ BooleanArguments
    There are 2 fields defined in this class.
    Add option 'delay_link '.
    Add option "cmd_end.
    Audit on the class oracle.opatch.opatchutil.CmdLineOptions$ IntegerArguments
    A list of the fields defined in the class oracle.opatch.opatchutil.CmdLineOptions$ IntegerArguments
    There are 2 fields defined in this class.
    Add option 'integerarg1 '.
    Add option 'integerarg2 '.
    Audit on the class oracle.opatch.opatchutil.CmdLineOptions$ StringtegerArguments
    A list of the fields defined in the class oracle.opatch.opatchutil.CmdLineOptions$ StringtegerArguments
    There are 5 fields defined in this class.
    Add option 'stringtegerarg1 '.
    Add option 'stringtegerarg2 '.
    Add option "ps".
    Add option "mp".
    Add option "xmlinput.
    Audit on the class oracle.opatch.opatchutil.CmdLineOptions$ DoubleArguments
    A list of the fields defined in the class oracle.opatch.opatchutil.CmdLineOptions$ DoubleArguments
    There are 2 fields defined in this class.
    Add option 'doublearg1 '.
    Add option 'doublearg2 '.
    Audit on the class oracle.opatch.opatchutil.CmdLineOptions$ RawStringArguments
    A list of the fields defined in the class oracle.opatch.opatchutil.CmdLineOptions$ RawStringArguments
    There are 1 fields defined in this class.
    Add option "cmd".
    CmdLineHelper::loadRuntimeOption() for the class "oracle.opatch.opatchutil.OUSession".
    option string initialization 0, fp
    initialization of string option1, dp
    initialization of string option 2, en
    option during initialization of channel 3, dr
    4, MP initialization string option
    initialization string 5 option, phbasedir
    initialization string 6 option, phbasefile
    does init. String argument.
    initialization of the Boolean option 0, delay_link
    initialization of the Boolean option 1, cmd_end
    does init. Boolean argument.
    initialization option to the integer 0, integerarg1
    the initialization of the whole number 1 option, integerarg2
    does init. Integer argument.
    initialization of StringTeger option 0, stringtegerarg1
    initialization of option StringTeger 1, stringtegerarg2
    initialization of StringTeger option 2, ps
    initializing StringTeger option 3, mp
    initialization of StringTeger option 4, xmlinput
    does init. SringTeger arg
    the initialization of the Double option 0, doublearg1
    the initialization of the Double option 1, doublearg2
    does init. Double argument.
    initialization of RawString option 0, cmd
    does init. RawString arg.
    CmdLineHelper::loadRuntimeOption() for the class "oracle.opatch.opatchutil.OUSession", actually.
    CmdLineParser::initRuntimeOptions()
    Audit on the class oracle.opatch.opatchprereq.CmdLineOptions$ StringArguments
    A list of the fields defined in the class oracle.opatch.opatchprereq.CmdLineOptions$ StringArguments
    There are 3 fields defined in this class.
    Add option 'phbasedir '.
    Add option "patchids.
    Add option 'phbasefile '.
    Audit on the class oracle.opatch.opatchprereq.CmdLineOptions$ BooleanArguments
    A list of the fields defined in the class oracle.opatch.opatchprereq.CmdLineOptions$ BooleanArguments
    There are 2 fields defined in this class.
    Add option 'booleanarg1 '.
    Add option 'booleanarg2 '.
    Audit on the class oracle.opatch.opatchprereq.CmdLineOptions$ IntegerArguments
    A list of the fields defined in the class oracle.opatch.opatchprereq.CmdLineOptions$ IntegerArguments
    There are 2 fields defined in this class.
    Add option 'integerarg1 '.
    Add option 'integerarg2 '.
    Audit on the class oracle.opatch.opatchprereq.CmdLineOptions$ StringtegerArguments
    A list of the fields defined in the class oracle.opatch.opatchprereq.CmdLineOptions$ StringtegerArguments
    There are 2 fields defined in this class.
    Add option 'stringtegerarg1 '.
    Add option 'stringtegerarg2 '.
    Audit on the class oracle.opatch.opatchprereq.CmdLineOptions$ DoubleArguments
    A list of the fields defined in the class oracle.opatch.opatchprereq.CmdLineOptions$ DoubleArguments
    There are 2 fields defined in this class.
    Add option 'doublearg1 '.
    Add option 'doublearg2 '.
    CmdLineHelper::loadRuntimeOption() for the class "oracle.opatch.opatchprereq.PQSession".
    initialization string 0 option, phbasedir
    the initialization of the option channel 1, patchids
    initialization of string option 2, phbasefile
    does init. String argument.
    the initialization Boolean option 0, booleanarg1
    the initialization of the Boolean option 1, booleanarg2
    does init. Boolean argument.
    initialization option to the integer 0, integerarg1
    the initialization of the whole number 1 option, integerarg2
    does init. Integer argument.
    initialization of StringTeger option 0, stringtegerarg1
    initialization of option StringTeger 1, stringtegerarg2
    does init. SringTeger arg
    the initialization of the Double option 0, doublearg1
    the initialization of the Double option 1, doublearg2
    does init. Double argument.
    CmdLineHelper::loadRuntimeOption() for the class "oracle.opatch.opatchprereq.PQSession", actually.
    reqVer to use getEnv() = 10.2.0.4.0
    curVer = 11.2.0.1.0
    Worm of the current later that required? : true
    Current ver is equal to required? : false
    Checking the EMDROOT using the API of YES...
    CmdLineParser.processOPatchProperties () starts
    Ends of CmdLineParser.processOPatchProperties)
    OUIReplacer called::runEnvScript()
    SystemCall:RuntimeExec(cmds,_runDir): GOING to start to thread to read the input stream
    SystemCall:RuntimeExec(cmds,_runDir): Started thread to read the input stream
    SystemCall:RuntimeExec(cmds,_runDir): GOING to start to thread to read the error stream
    ::Run() ReaderThread: Stream InputStream about to be read
    SystemCall:RuntimeExec(cmds,_runDir): Started thread to read the error stream
    SystemCall:RuntimeExec(cmds,_runDir): ENTER process.WAITFOR()
    ::Run() ReaderThread: ErrorStream stream being read
    ::Run() ReaderThread: Stream InputStream finished reading
    ::Run() ReaderThread: reading stream ErrorStream completed
    SystemCall:RuntimeExec(cmds,_runDir): process.WAITFOR() is ON
    SystemCall:RuntimeExec(cmds,_runDir): Wire flow error joined with success
    SystemCall:RuntimeExec(cmds,_runDir): Input stream thread joined with success
    OUIReplacer called::setKeyValue()
    OPatchSession::main()
    Environment:
    OPatch.ORACLE_HOME=/u01/app/oracle/product/11.2.0/home11gR2
    oracle.installer.invPtrLoc=/u01/app/oraInventory/oraInst.loc
    Oracle.Installer.oui_loc=/U01/app/Oracle/product/11.2.0/home11gR2/Oui
    Oracle.Installer.library_loc=/U01/app/Oracle/product/11.2.0/home11gR2/Oui/lib/Linux
    Oracle.Installer.startup_location=/U01/app/Oracle/product/11.2.0/home11gR2/Oui
    OPatch.PLATFORM_ID =
    OS. Name = Linux
    OPatch.NO_FUSER =
    OPatch.SKIP_VERIFY = null
    OPatch.SKIP_VERIFY_SPACE = null
    oracle.installer.clusterEnabled = false
    TRACING. ENABLED = TRUE
    TRACING. LEVEL = 2
    OPatch.DEBUG = true
    OPATCH_VERSION = 11.1.0.6.6
    Delivered OPatch property file = properties
    Minimum version of YES: 10.2
    OPatch.PATH=/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oracle/bin:/u01/app/oracle/product/11.2.0/home11gR2/bin:/u01/app/oracle/product/11.2.0/home11gR2/OPatch
    Independent House: false


    Environment:
    OPatch.ORACLE_HOME=/u01/app/oracle/product/11.2.0/home11gR2
    oracle.installer.invPtrLoc=/u01/app/oraInventory/oraInst.loc
    Oracle.Installer.oui_loc=/U01/app/Oracle/product/11.2.0/home11gR2/Oui
    Oracle.Installer.library_loc=/U01/app/Oracle/product/11.2.0/home11gR2/Oui/lib/Linux
    Oracle.Installer.startup_location=/U01/app/Oracle/product/11.2.0/home11gR2/Oui
    OPatch.PLATFORM_ID =
    OS. Name = Linux
    OPatch.NO_FUSER =
    OPatch.SKIP_VERIFY = null
    OPatch.SKIP_VERIFY_SPACE = null
    oracle.installer.clusterEnabled = false
    TRACING. ENABLED = TRUE
    TRACING. LEVEL = 2
    OPatch.DEBUG = true
    OPATCH_VERSION = 11.1.0.6.6
    Delivered OPatch property file = properties
    Minimum version of YES: 10.2
    OPatch.PATH=/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oracle/bin:/u01/app/oracle/product/11.2.0/home11gR2/bin:/u01/app/oracle/product/11.2.0/home11gR2/OPatch
    Independent House: false



    Oracle home: /u01/app/oracle/product/11.2.0/home11gR2
    Inventory Center: / u01/app/oraInventory
    from: /u01/app/oraInventory/oraInst.loc
    OPatch version: 11.1.0.6.6
    YES version: 11.2.0.1.0
    YES location: /u01/app/oracle/product/11.2.0/home11gR2/oui
    Location of the log file: /u01/app/oracle/product/11.2.0/home11gR2/cfgtoollogs/opatch/opatch2012-01-19_04-10-13AM.log

    History of patch file: /u01/app/oracle/product/11.2.0/home11gR2/cfgtoollogs/opatch/opatch_history.txt

    OUISessionManager::instantiate()
    lockCentralInventory(): OUISessionManager::lockCentralInventory() retries 0 times with every 120 seconds to get a lock of the inventory.
    Try OUISessionManager::lockCentralInventory() round # 1
    OUISessionManager::setupSession()
    OUISessionManager::setupSession() instantiates an OUIInventorySession obj.
    OUISessionManager::setupSession() init. the session
    OUISessionManager::setupSession() implements READ ONLY session
    OUISessionManager::setupSession() done
    OUISessionManager::lockCentralInventory() configure session OK
    reqVer = 10.2
    curVer = 11.2.0.1.0
    Worm of the current later that required? : true
    Current ver is equal to required? : false
    ApplySession::process()
    ApplySession::process(): loading object patch.
    ApplySession::loadAndInitPatchObject()
    PatchObject (patchLocation)
    PatchObject::PatchObject looking for file /u01/app/oraInventory/etc/config/actions.xml actions
    PatchObject::PatchObject looking for the file /u01/app/oraInventory/etc/config/inventory.xml inventory
    parserXMLFile: start
    parserXMLFile: start

    Bugs fixed by this patch 11879896 :
    11879896: SMPSSE: OVERVIEW OF THE PERFORMANCE OF DATABASE DOES NOT WORK ON MAC/LINUX

    PatchObject::setPreReadMeAction: readMeFile = /u01/app/oraInventory/custom/pre.txt
    noOp = true
    fileContent =
    PatchObject::setPreScriptAction: [PreScriptAction:-]
    no - op = true, fileLoc = / u01/app/oraInventory/custom/scripts/pre
    [Pre script is not present.-]

    PatchObject::setPostReadMeAction: readMeFile = /u01/app/oraInventory/custom/post.txt
    noOp = true
    fileContent =
    PatchObject::setPostScriptAction: [PostScriptAction:-]
    no - op = true, fileLoc = / u01/app/oraInventory/custom/scripts/post
    [Post script does not exist.-]

    PatchObject::setInitReadMeAction: readMeFile = /u01/app/oraInventory/custom/init.txt
    noOp = true
    fileContent =
    PatchObject::setInitScriptAction: [InitScriptAction:-]
    no - op = true, fileLoc = / u01/app/oraInventory/custom/scripts/init
    [Init script does not exist.-]

    Fix provisional application '11879896' ApplySession to OH ' / u01/app/oracle/product/11.2.0/home11gR2'
    ApplySession::processLocal()
    OPatchEnv:
    ["OPatchEnv: OracleHome="/u01/app/oracle/product/11.2.0/home11gR2 ", force = false, value = false, mod. inv. = true, the system mod. = true, local mode = false, all the lsinv = false, lsinv detail = false, lsinv patch = false, nolink = false, Retry = 30, delay = 120, CallerName = OPatch, CallerVersion = 11.1.0.6.6, SessionType = apply, JdkLoc=/u01/app/oracle/product/11.2.0/home11gR2/jdk, JreLoc=/u01/app/oracle/product/11.2.0/home11gR2/jre/1.4.2] , OracleHome via-oh = OracleHome via env.=/u01/app/oracle/product/11.2.0/home11gR2, via the response file OracleHome =, OPatch recognized InvPtrLoc=/u01/app/oraInventory/oraInst.loc, InvPtrLoc=/u01/app/oraInventory/oraInst.loc is specified by the user, without re-creating a link = false, Patch ID used in Rollback =, Patch ID with OPack timestamp =, PreOpt =, PostOpt =, OSName = Linux, is = false,.patch_storage=/u01/app/oracle/product/11.2.0/home11gR2/.patch_storage , .patch_storage / < ID > =/u01/app/oracle/product/11.2.0/home11gR2/.patch_storage/ entire Patch is saved to=/u01/app/oracle/product/11.2.0/home11gR2/.patch_storage//original_patch, backup restore path=/u01/app/oracle/product/11.2.0/home11gR2/.patch_storage//backup backup for Rollback path=/u01/app/oracle/product/11.2.0/home11gR2/.patch_storage//files, FilesMap info from=/u01/app/oracle/product/11.2.0/home11gR2/inventory/oneoffs/ < patch_id > [, PatchLoc = / u01/app/oraInventory, SyntaxErrorMsg =]
    Process InitReadMeAction()
    InitReadMeAction::catFile() is a no - op
    InitScriptAction::process() is a no - op
    Checking prerequisites 'CheckApplicableProduct '...

    PrereqAPI::checkApplicableProduct
    PrereqAPI::checkStandAloneHome())
    PREREQ checkApplicableProduct spent
    OPatch checks if the patch is applicable to this type of product home
    ApplySession::setupPatchStorage()
    ApplySession::processLocal() load inventory
    OracleHomeInventory::createInventoryObj()
    OracleHomeInventory::createInventoryObj() gets OUIInventorySession object
    Locker: lock()
    call of lockCentralInventory()
    OUISessionManager::getInventorySession()
    Details of the appellant:
    Name calling: OPatch calling Version: 11.1.0.6.6 requested access read-only: false Oracle Home: /u01/app/oracle/product/11.2.0/home11gR2
    OUISessionManager::instantiate()
    lockCentralInventory(): OUISessionManager::lockCentralInventory() retries 30 times with every 120 seconds to get a lock of the inventory.
    Try OUISessionManager::lockCentralInventory() round # 1
    OUISessionManager::setupSession()
    OUISessionManager::setupSession() instantiates an OUIInventorySession obj.
    OUISessionManager::setupSession() init. the session
    OUISessionManager::setupSession() put in place the session of READING / WRITING
    OUISessionManager::setupSession() done
    OUISessionManager::lockCentralInventory() configure session OK
    OUISessionManager::register()
    Record of the appellant: OPatch
    Locker::Lock(): /u01/app/oracle/product/11.2.0/home11gR2/.patch_storage does exist, no need of mkdir.
    Locker::Lock(): /u01/app/oracle/product/11.2.0/home11gR2/.patch_storage/patch_free exists, will delete the file.
    Locker: lock() creates /u01/app/oracle/product/11.2.0/home11gR2/.patch_storage/patch_locked
    OracleHomeInventory::createInventoryObj() gets OUIInstallAreaControl object
    OracleHomeInventory::createInventoryObj() gets OUIInstallInventory object
    OracleHomeInventory::createInventoryObj() gets OUIOracleHomeInfo object
    OracleHomeInventory::createInventoryObj() built
    OracleHomeInventory::load()
    OracleHomeInventory::load() Gets a vector of all categories of products
    OracleHomeInventory::load() Gets a vector of all the unique entries
    OracleHomeInventory::load() starts to process the raw data of the YES to accumulate the primitive classes OPatch
    RAC::GetInstance()
    initializing racType
    RAC::getClusterNodes()
    call OiiOracleHomeInfo::getNodeList()
    OiiiOracleHomeInfo::getNodeList() returned 0 items.
    RAC::getClusterNodes() returns a list of items from 0.
    The user has not used - no_inventory, then why clusterNodes are empty?
    clusterNodes is null or empty, set racType to NO_RAC
    checkIfSidAddition()
    OracleHomeInventory::load()
    OracleHomeInventory::load() Gets a vector of all categories of products
    OracleHomeInventory::load() Gets a vector of all the unique entries
    OracleHomeInventory::load() starts to process the raw data of the YES to accumulate the primitive classes OPatch
    ApplySession::processConflict()
    PrereqAPI::checkConflictAgainstOHWithDetail()

    Number of Oneoffs in the Oracle home: 0
    PrereqAPI::checkConflictAgainstOH()

    List of patches on which runs the prereq InterConflict are:
    11879896
    OneOffEntry::getBugIDsFixed()
    OneOffEntry::getBugIDsFixed() returns 1 bugs.

    There is no conflict/supersets.
    PREREQ checkConflictAgainstOHWithDetail Passed
    Run all the prereqs associated with apply.

    Prior running check...

    Checking prerequisites 'CheckForInputValues '...
    PrereqAPI::checkForInputValues()
    Input values is present for all the shares of the given patches.

    Checking prerequisites 'CheckSystemSpace '...
    PrereqAPI::checkSystemSpace()

    Find the total space required...

    Space required for patches are total: 11865356

    Checking if a space is present on the disk...

    Amount of required space is available on the disk.
    PREREQ checkSystemSpace Passed
    Enough space system is available.

    Checking prerequisites 'CheckPatchApplicableOnCurrentPlatform '...
    PrereqAPI::checkPatchApplicableOnCurrentPlatform()
    Read the platforms for patch11879896

    Genereic 0est platform ID specified for the patch: 11879896
    All the given patches are applied on the current platform.

    Checking prerequisites 'CheckSystemCommandAvailable '...
    PrereqAPI::checkSystemCommandAvailable()
    Rules: shouldSearchOrInvokeFuser()
    the user did not OPATCH_NO_FUSER but executable list is null or empty, return false.

    PatchObject: Patch will need of following commands:
    --------------------------------------------------------------------
    Archives of fuser need do sqlplus ptlpatch mkpatch
    false false false false false false
    --------------------------------------------------------------------
    Do the sqlplus ptlpatch Archives of fuser mkpatch
    true true true true true true


    All the required commands are available.
    PREREQ checkSystemCommandAvailable Passed
    All required system controls are present.

    Checking prerequisites 'CheckActiveFilesAndExecutables '...
    PrereqAPI::checkActiveFilesAndExecutables()

    Fuser invoking the executable list...
    getCommandInPropertyFiles(): command search 'fusion' in the file properties "properties."
    Path in the real estate records merged: / sbin: / usr/sbin: / usr/local/sbin
    check on "/ sbin/fuser unit.
    found ' / sbin/fuser unit.
    getCommandInPropertyFiles(): command search 'fusion' in the file properties "properties."
    Path in the real estate records merged: / sbin: / usr/sbin: / usr/local/sbin
    check on "/ sbin/fuser unit.
    found ' / sbin/fuser unit.

    There is no executable assets.
    PREREQ checkActiveFilesAndExecutables Passed
    None of the executables is active.

    Checking prerequisites 'CheckApplicable '...
    PrereqAPI::checkApplicable() check whether each Action is applicable
    PrereqAPI::checkComponents()
    PrereqAPI::checkComponents search required components.
    OracleHomeInventory::haveComponents()
    There are 1 items to check.
    Patch (component to check) Component is "oracle.sysman.console.db", "11.2.0.2.0", required = "true".
    OracleHomeInventory::haveComponents(): installInventory.getCompInvEntries () on 'oracle.sysman.console.db', '1' = homeIndex returns 1 components.

    Installed process component 'oracle.sysman.console.db', version '11.2.0.1.0 '.
    Installed control product: name = "oracle.sysman.console.db', version = '11.2.0.1.0'
    Installed Comp > < Patch Comp:
    Installed the Comp Version later than Patch Comp = false
    Installed model can replace Patch Comp = false
    Install the Comp Version is equal to or later than the Comp Patch: fake
    Comp. req. not in the inventory OH: oracle.sysman.console.db, 11.2.0.2.0
    Patch 11879896 : Required or missing components: [oracle.sysman.console.db, 11.2.0.2.0]
    PrereqAPI::checkComponents search option components.
    OracleHomeInventory::haveComponents()
    OracleHomeInventory::haveComponents() Gets an empty list. Nothing to do, returns a list return empty.
    The prerequisite checking 'CheckApplicable' failed.
    The details are:
    Patch 11879896 : Required or missing components: [oracle.sysman.console.db, 11.2.0.2.0]
    System intact, OPatch will not attempt to restore the system
    Locker: release()
    OUISessionManager::unRegister()
    Registration not calling: OPatch
    Locker: release() removes /u01/app/oracle/product/11.2.0/home11gR2/.patch_storage/patch_locked
    Locker: release() creates /u01/app/oracle/product/11.2.0/home11gR2/.patch_storage/patch_free
    Cleaning of the directory: ' / u01/app/oracle/product/11.2.0/home11gR2/.patch_storage/patch_unzip '...

    OPatch failed with the error code 74

    Well its quite obvious, isn't?

    Check installed product: name="oracle.sysman.console.db", ver="11.2.0.1.0"
    ...
    Patch 11879896: Required component(s) missing : [ oracle.sysman.console.db, 11.2.0.2.0 ]
    

    11.2.0.1 vs 11.2.0.2

  • Exit 11 topic: config fails with the error analysis

    No problem after installing version 11 until they tried to use
    Subject: config which failed with the following message.

    XML parsing error: undefined entity
    Location: subject: config
    Line number 59, column 1: key = "& focusFilter.key;" modifiers = "accel" oncommand = "document.getElementById('textbox').focus ();" / > "
    ^

    The problem was caused by Prefsearch addon. I have notified the
    Developer.

  • HPDM deployment fails with the error code: 14031022

    Hello everyone,

    I ve a strange problem with a new repository of child I ve created two weeks ago. Following situation:

    We have a master and (until now) repository repository a child for two locations. Capture and deployment on each side works fine. Now we're getting a third place, so we need another hpdm gateway and a child repitory to this place.

    I've added and configured as one worked and insert the IP address of the gateway again to a thin client to the new location. When I deploy an image on this client, I get the following error in the console of hpdm:

    2014-12-16 11:02:09 Assign repository: repository child name repository
    2014-12-16 11:02:13 synchronized correctly Completed.
    2014-12-16 11:02:14 task sent to the device management gateway
    2014-12-16 11:02:17 task has been retrieved from the agent.
    2014-12-16 11:02:58 deploy the image ready using the repository: repository child name guard.
    2014-12-16 11:02:58 running common-task failed.
    2014-12-16 11:02:58 Errorcode: 14031022, error details: download the file (s) failed.
    2014-12-16 11:02:58 running common-task failed.
    2014-12-16 11:02:58 Errorcode: 14031022, error details: download the file (s) failed

    Agent of Thin Client Gateway: 4.5.3660.18502

    HPDM bridge officer: 4.5.3660.19.503

    agent update task works.

    I ve configured the shared folder and FTP access. Both are available from thin client. Configuration of the repository the two test passed successfully.

    Repository of child synchronize all the data from the master repository with success.

    Usually, I use FTP in IIS services, but filezilla I ve installed (disabled FTP IIS) for the best connection.

    Connects to the deployment task:

    000027) 16.12.2014 11:02:27 - (not connected) (10.32.2.52) > connected on port 21, sending the welcome message...

    16.12.2014 (000027) 11:02:27 - (not connected) (XX. XX. X.XX) > USER test

    16.12.2014 (000027) 11:02:27 - (not connected) (XX. XX. X.XX) > 331 password required for the test

    16.12.2014 (000027) 11:02:27 - (not connected) (XX. XX. X.XX) > PASS *.

    16.12.2014 (000027) 11:02:27 - test (XX. XX. X.XX) 230 > connected

    16.12.2014 (000027) 11:02:28 - test (XX. XX. X.XX) > FEAT

    16.12.2014 (000027) 11:02:28 - test (XX. XX. X.XX) > QUIT

    16.12.2014 (000027) 11:02:28 - test (XX. XX. Goodbye > 221 X.XX)

    16.12.2014 (000027) 11:02:28 - test (XX. XX. X.XX) > disconnected.

    Next, I get the above error HPDM. The server log HPDM said next.

    2014-12-16 11:11:35 [line 2] WARN Util - revertNumericString fail: k.A.

    2014-12-16 11:11:35 [line 2] WARN Util - revertNumericString fail: k.A.

    Mhh not a lot of information.

    I Don t really get what could be the problem. You have an idea? Do you need more information (newspapers, error message TE) for assistance?

    Concerning

    Martin

    After the coup of controller.conf and the screen of the dialog editor repository that you set, your master repository was not configured this way:

    ReposPath has the value "C:\Inetpub\Ftproot\HPDM" in controller.conf (assume C:\Inetpub\Ftproot is the root directory of the FTP server)

    In the Master repository Editor dialog box:

    Implement FTP path to ftp: / //HPDM - he WS ftp: / /<>/. your screenshot.

    This is the reason that all of your linked FTP task failed with the same error code.

  • Active Directory certificate services installation failed with the following error: unknown mapping algorithm. 0 X 80091002 (-2146889726 CRYPT_E_UNKNOWN_ALGO)

    Hello

    I installed the role of CA of the authority in the installation, I want to use the existing root certificate when I try to import this certificate .pfx, that I have this error

    Active Directory certificate services installation failed with the following error: unknown mapping algorithm. 0 X 80091002 (-2146889726 CRYPT_E_UNKNOWN_ALGO)

    Anyone know what's wrong

    Thanks for help.

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

    If you give us a link to the new thread we can point to some resources it
  • All security updates fail with the error A 80071, 91 code

    Hello!

    System information: Windows 7 Ultimate 64-bit, i7-720QM, 6 GB RAM, 256 GB SSD, ATI 4670 [Dell Studio XPS 1645]

    Background:

    • UAC was arrested. Turn on UAC stop my gadgets to work [another thread on these forums...].
    • A week ago, I got speech recognition works only with a local edition. Insert this ctfmon '=' CTFMON registry entry. EXE, to HKLM\Software\Microsoft\Windows\CurrentVersion\Run, fixed the problem. However, I can't find to this registry entry.
    • Four days ago, I had slow internet speed. I did a 'Complete' Microsoft Security Essentials scan and it found many exploits (Explot: Java/CVE-2009-3867.) BX, TrojanDownloader / OpenConnection.AK, TrojranDownloader:Java / Rexec.c and a dozen others). I removed all the. The internet speed is back to normal.
    • This morning, I have updated the firmware on my SSD to activate the TRIM. I restored an image of the drive I did with Windows Backup and Restore just before updating the drive.

    Problem:

    • I tried Windows Update after update of the SSD. It downloads all updates, installs, and prompts you to restart the computer to complete the installation. During the shutdown, some files are 'configured '. Upon restart, during the boot of Windows GUI (circles of flight), there is a break-up of the code, something about the registry. On logon, it gets "35%" and says so "returning default configuration updates,' or something like that. I get a notification indicating that the updates failed.
    • On Windows Update, only Silverlight, Windows malicious software removal, MSE definition updated and updated Office Publisher are successful.
    • All other updates (security updates, cumulative updates, security updates for IE, updates for Windows) fail with the error code A 80071, 91.
    • If you are looking for updates that fail, here they are: KB2416400, KB2296199, KB2305420, KB2385678, KB2423089, KB24236673, KB2442962, KB246759 and KB2443685.

    What I tried:

    • Disk Cleanup attempt (and unfortunately removed all restore points). Did not work.
    • Attempt to sfc/scannow. He found a few files, that it could not correct; I have the CBS.log newspaper if you need. However, updates still do not work.
    • Tried to reset the resource manager to file with "fsutil resource setautotest true c:\ ». She is successful. However, after the restart, the updates still do not work.
    • Tried a Full scan with MSE. No anomaly.
    • Tried to reset components to update Windows (using the Vista Fix - It via KB971058). Updates still do not work.
    • Attempt of Microsoft Malicious Software Removal Tool (updated dec 2010) Full Scan, no malicious software was detected. Updates still do not work.
    • Attempt of Anti-Malware analysis complete Malwarebyte, no malicious software found. Updates still do not work.

    I don't think that this is malware, but a Windows problem... My internet is wobbly for these last two days, a lot of packet loss (pages only "" half load, some missing frames, etc.). Not sure if this is related, but it downloads the updates very well. It is not always the marker "35%".

    I'm out of ideas. What's next?

    Thank you

    ~ Ibrahim ~.

    1. about 1 year, I installed MSE.

    2 McAfee has been preloaded; the subscription was updated (in a 90-day trial), and I uninstalled McAfee completely (regular uninstall and Removal Tool provided by McAfee).

    3. Yes, for about 30 minutes before I uninstalled and installed MSE.

    4. Yes.

    However, with a little help seven forums, we have figured out it is the registry. I did a reinstall and then the updates installed correctly.

    Thanks for the help, if! :)

  • The Service Pack installation failed with the 0x8e5e03fe error code.

    Hi all

    I'm not able to install Windows Server 2008 R2 SP1, when I install SP1, its going very well up to 90%, after that its giving the below error.

    ' 1. the Service Pack installation failed with the error 0x8e5e03fe. ".

    2 "changes in an update (Service Pack for Microsoft Windows (KB976932)) failed during the installation of the Service Pack.

    Identity: Package_for_KB976932 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.1.17514

    Error code: 0x8e5e03fe

    State: 7 "

    I took the following steps to resolve. but it's not helping me.

    1. I CA anti-virus, I disabled the Agent Client of CA.

    "2. I installed Windows analysis tool, but I did ' t get any error, under the errorlog for your reference."
    =================================
    Preparation of control system was updated.
    Binary version 6.1.7601.21645
    Package Version 11.0
    2011-04-16 15:49

    Checking Windows Service Packages

    Checking of manifests package and catalogs

    Checking package Watchlist

    Watchlist checking

    Checking packages

    Control components store

    Summary:
    Seconds executed: 753
    No error found.

    3. I ran this commond ""dism / online/Remove-Package /packagename:Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514 " "

    Please help me

    Concerning

    Ganga

    Hi Ganga,

    Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Windows Server Forums. Please post your question in the Windows Server forum.

    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

  • Windows updates fails with the error code 'E '.

    Original title: Error Code 'E '.

    What does the error code E?

    Keep saying I need updates and then fails with the E. help error code, please.

    Hi Rodrigues0406,

    1 Windows operating system you are using?

    2. What is the exact error or message code you get?

    Method 1

    I suggest that you reset Windows update components and check if it works.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    Method 2

    If you're still having problems, then you can check in the history of Windows update and the updates recently installed in vain.

    Step 1:

    Check the update history to see what updates have been installed or has failed. See the link for the same mentioned below.

    See the Windows updates are installed

    http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

    Step 2:

    If you see updates failed, you can try downloading and installing the updates manually from the Microsoft download center:

    http://www.Microsoft.com/downloads/en/default.aspx

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Home Vista premium: KB978338 fails with the error code 80004005

    Cannot install other updates windows update screws. Impossible to find answers to this specific problem, all the links seem to point to XP or windows 7

    Went to the Microsoft site and just tried to download and install just the fix KB978338, watched as she worked, system has rebooted with what looked like 266/266/registry component machine appearing on the screen just after the message of the HP bios and just before loading windows.  The PC then realized... Updates not configured correctly - returning changes.

    Seem to be stuck in this loop that KB978338 will not install and stops all other updates installation as all fails with the error code 800F0826.

    Hi gbislay,

    I think that you are able to get on the desktop after changes have been restored.

    Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    Step 2: Download and run the system update tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

    The system update tool

     

    Step 3: Clean boot the computer

    Follow step 1 in the link below,

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    Important: n ' forget not to put the computer to follow normal start-up step 7 in the link.

    Step 4: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the mouse and keyboard and then try to install the updates.

    You can see the steps outlined in the article below, which deals with a similar question

    Windows Update error 800f0826

    The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

    Service pack Windows Vista and Windows Server 2008 install fails with error 0x80004005

     

    Note: Steps to solve the problem of Windows Update for Windows 7 is valid for Windows Vista.

    Thanks and greetings
    Ajay K

    Microsoft Answers Support Engineer
    ***************************************************************************
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

    KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

    Whenever I run this update, it seems that it installs about 90% of the way but then stops and breaks down about 20 seconds later.  If someone else sees this problem and is at - it a solution?  I'm running Vista Home Premium SP2 and KB2183461 is listed as a critical update for my system.  Help?

    Preliminary stage: If the Tea Timer of Spybot is enabled, please disabled until we finished this thread. Seehttp://aumha.net/viewtopic.php?f=26&t=32409

    Tip: If you don't fully understand what Tea Timer does and how it does, leave it disabled permanently.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    McAfee applications (and Norton) are known for not not upgrade (or uninstall) "clean". If you have McAfee Security Center installed since you bought the computer, he is been updated (automatically) several times. Try the following:

    1. run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

    2. after reinstallation of McAfee Security Center to step #3 patch triple, manually & repeatedly updated McAfee Security Center until you get one invite "no updates more".

    3. OPTIONAL: If you have had problems with IE8, open IE8 (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

    4. OPTIONAL STEP: Open IE8 (only) to http://support.microsoft.com/kb/971058 & run the difficulty by DEFAULT inside and modes and AGGRESSIVE. [1]

    5 restart and test by launching a manual check of updates & see if KB2183461 now installs. See...

    How will I know if my computer is up to date?
    http://Windows.Microsoft.com/en-us/Windows-Vista/how-can-I-tell-if-my-computer-is-up-to-date

    ~~~~~~~~~~~~~~~~~~~~~~~~
    [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or updates installed (Vista & Win7).

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • BITS service fails with the error code 193: 0xc1

    Program update of Microsoft with Vista SP 2 is a failure with error code 80246008.  Looking at the forum it was suggested that the BITS service does not work so I check this service and it is not executed.  When I try to start it, it fails with the error message 193: 0xc1.

    The only suggestion I have for this fix is to reinstall Vista.  It is probably not necessary?

    Hello

    I suggest you follow the steps mentioned in the article below.

    You receive an error message when you try to download the updates on the Windows Update Web site or the Microsoft Update Web site, or when you try to start the Background Intelligent Transfer Service

    http://support.Microsoft.com/kb/916251

    If this does not help then I suggest you to download the update that is mentioned in the link given below and install it on the system.

    Update for Windows Vista (KB960568)

    http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=d7ae9660-BB13-4F0C-816b-85de3980ec1b&displaylang=en

    Click the link below for more information about the Windows Update error.

    Error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site: "0 x 80246008.

    http://support.Microsoft.com/kb/956706

    Windows Update error 80246008

    http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80246008

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Download works 9 KB2092914 security update and it fails with the error code 646

    Update of security for Works 9, KB2092914, downlaod fails with the error code 646

    See this thread:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/0c397230-26c6-4214-a5d1-3c99d2b2ef47

    Please let us know if that helps.

  • Windows 7 Pro will be not updated for Windows: fails with the error code 1 (0 x 000000000000001), which is a problem of language pack, version __Pro DON 'T SUPPORT SEVERAL LANGUAGES '.

    Windows colleagues for support.

    My windows install/windows update is broken; There will not be security critical update, installers fail with the error

    code 1, indicating a problem with language packs; I use widows 7 pro for software development.

    Several lanagues packs are not part of windows 7. should I upgrade to ultimate for your problem?

    More sophisticated repair attempt, SFC/scannow indicates corruption, but cannot fix it.

    Hand, install the update package out of work.

    Your opinion is welcome. I have

    Hey Hey Hey Doc K whadu say?

    I solved my problem;

    the problem was owner and permission on my programs, all users, the program data and my programs (86).

    As I type this i / m re - run SFC/verify only and a big pile of sucessfully some updates installed.

    What have I done? I took possession of the special directories above from "TrustedInstaller".

    Even when owned by TrustedInstaller, it does not have permissions. Some places I found rejection specific to the owner of the network.

    -What happened? Do you have a trusted Installer get stuck Mid-install?

    I took possession of SYSTEM, and made sure the CREATOR had every right, as in the SYSTEM and

    USER, AUTHENTICATED USER. I was perhaps too broad.

    I took possession, and then all of the repressed, updates windows are presented themselves to install,.

    and I expect /VERIFYNOW SFC before as I mark this as running.

    I'm fairly certain VS2008 and VS2010 now repair and install.

    Hmmm... always to see funny error message in SFC...

    We need a tool to give an overview of a directory tree ownership and permissions.

    dB

    Hey Hey Hey Doc K whadu say?

  • I have problems to install the Microsoft 2007 12 updates. They all invariably fail with the following message details: ___Error error: Code 8007006E___Any ideas on how I can fix this? ___I have Microsoft Vista.

    I have problems to install the Microsoft 2007 12 updates.  They all invariably fail with the following error message:

    Error details: Code 8007006E

    Any ideas on how I can fix this?

    I've got Microsoft Vista.

    Hi 1proudmama
    Welcome to the Microsoft Answers Forum!
    We would like to know are these updates on Office 2007

    I recommend the methods are:
    Method 1:
    Step 1:
    Uninstall the update failed, if she is found in the installed updates, follow these steps
    i. open Control Panel from the start menu
    II. Select programs and features
    III. click Show on the installed update.
    IV. uninstall the update failed
        
    Step 2:
    Reset the component of windows update and then try to install updates, check if the problem is resolved. It has Fix tool link below will help you with the same
    How to reset the Windows Update components: http://support.microsoft.com/kb/971058

    Step 3:
    Install the stand-alone package containing the updates. You can download the stand-alone version of the link with the number of KB below: http://www.microsoft.com/downloads and check if the problem is resolved.

    Method 2:
    Run the SFC (System File Checker) on the computer scan to fix system errors to the file on the computer.
    To run a SFC scan, follow these steps:
    Open an elevated command prompt. To do this,
    i. Click Start,
    II. click principally made programs,
    III. click Accessories, right-click command prompt,
    IV. and then click Run as administrator.
    v. If you are prompted for an administrator password or a confirmation, type the password, or click on allow or continue.
    VI. at the command prompt, type sfc/scannow and press ENTER. Once the scan is complete, restart the computer so that the changes take effect

    Below link for reference: http://support.microsoft.com/kb/936212

    Thank you, and in what concerns:
    Samhrutha G S - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • CallExtractFiles failed with the error 0x8007007e.

    I get the following when Truing error to run Microsoft Update: [error number: 0x8007007E]

    My windowsupdate log has the following entries:

    Notifications of recommended is disabled.
    2012-10-27 23:43:20:843 472 b5c Misc = logging initialized (build: 7.6.7600.256, tz:-0400) =.
    2012-10-27 23:43:20:843 472 Misc b5c = process: C:\Program may Explorer\IEXPLORE. EXE
    2012-10-27 23:43:20:843 472 Misc b5c = Module: C:\WINDOWS\system32\wuapi.dll
    2012-10-27 23:43:20:843 472 b5c COMAPI - COMAPI: IUpdateServiceManager::AddService -.
    2012-10-27 23:43:20:843 472 b5c COMAPI - ServiceId = {7971f918-a847-4430-9279-4a52d1efe18d}
    2012-10-27 23:43:20:843 472 b5c COMAPI - AuthorizationCabPath = C:\WINDOWS\SoftwareDistribution\AuthCabs\muauth.cab
    27-10-2012 23:43:20:859 2012 15 b 8 Misc validation signature for C:\WINDOWS\SoftwareDistribution\AuthCabs\Downloaded\7971f918-a847-4430-9279-4a52d1efe18d.auth.cab.temp\muauth.cab:
    27-10-2012 23:43:20:890 2012 15 b 8 Misc Microsoft signed: Yes
    27-10-2012 23:43:20:890 2012 15 b 8 Agent WARNING: CallExtractFiles failed with the error 0x8007007e.
    27-10-2012 23:43:20:890 2012 15 b 8 Agent WARNING: WU client omits CClientCallRecorder::AddService2 with the error 0x8007007e
    2012-10-27 23:43:20:890 472 b5c COMAPI WARNING: ISusInternal::AddService failed, hr = 8007007E
    2012-10-27 23:43:20:890 472 b5c COMAPI - exit code = 0x8007007E

    You have recently installed a Service Pack?

    This article mentions your error-

    http://support.Microsoft.com/kb/914232
    You may receive error code 0 x 80004005 and other error codes when you try to start a Windows XP-based computer

    in the opposite case

    Some users have cured the problem in restoring just the c:\windows\system32\wuapi.dll
    Click Start, select run, and type: regsvr32 c:\windows\system32\wuapi.dll
    Try Windows Update

    If none of the above, perhaps this article can help you.

    http://support.Microsoft.com/kb/831429

    Windows XP stops responding when you download updates from Windows Update

Maybe you are looking for

  • iPhoto 11 crushing

    So far I never had NO problem with my desktop iMac computer. You wanted to print some pictures yesterday and before I could get started iPhoto crashed right after that I tried to open it. Tried many times to restart the computer and the program with

  • Can't associate my Apple for my Apple Watch pay credit card

    I just added my credit card in my Wallet to pay for the first time 6 Apple iPhone. He asked if I wanted to pair it with my Apple Watch, I said yes. It was about 20 minutes ago. It is frozen on the screen 'Add now' since then, no change. Apple Watch i

  • How to open file audio waveform

    We have a file on a USB audio waveform.  iTunes will not play it... any suggestions or recommendations on another application to use or download?  Thank you!

  • Acer Iconia tab 10 B3 - A20 crashes when you use the volume buttons {has only "System-UI"}

    When I press the volume buttons, I get the error {has only "System-UI"} and the screen goes black. I have tried factory reset already - did not work. Interestingly, the error doesn't occure while watching videos. Pls help its really annoying

  • How to install driver 7.7.0.498 for AR5007EG Atheros

    I downloaded the driver for this card. It is a compressed file. My computer doesn't open - what should I do?