Linux - breaks down during the phone call after receiving the notice of someone who comes online

Hello! Having a problem with Skype 4.2.0.11 for Linux.

This happened to me twice today: during a phone conversation (I had dialed a phone number), after that Skype gave me a notice saying a contact had been online, the cut received phone call and Skype crashed. Ideas for solutions?

I use Ubuntu 12.04, 64-bit, and once again the version of Skype is 4.2.0.11, please let me know if there is more information I could give that would help. Thank you!

Sorry for typo's fault, I can't edit any longer after a day or two. Here's the good:

sudo apt - get install libasound2 - plugins:i386

Thank you

Marco

Tags: Skype

Similar Questions

  • Time Machine breaks down during the work week, working all weekend after preferences rebuilt

    End of 2013 the MacBook Pro 13 "Retina display, 16 gig RAM, OS x 10.10.5, gigabit networks are home and work, NAS at home only.

    MacBook is used as working on simple business network machine all week. Time Machine off and save a couple hundred K and then crashes when I connect to home network at night. Same thing happens when I return to the home network for the weekend. I have disable TM, kill the TM preferences, restart to create new ones, back up on my home network NAS all weekend without problem. I turned off TM before going to work on Monday and back at home Friday night, and it fails. If the routine is now restore preferences TM Friday night, let the backup of its contents all weekend, turn off TM and go to work all week.

    I would like to have the security of offline backup that comes with the TM run all the time.

    It was suggested elsewhere to rebuild the Spotlight database. It did not work. I use locate on the command line and have rebuilt the database too.

    Any suggestions?

    A device third-party network attached storage (NAS) or a router is unsuitable for use with Time Machine, especially if it's your only backup. I know that's not what you want to hear. I know that Time Machine accepts the device as a backup destination. I know that the manufacturer says the device will work with Time Machine, and I also know that it usually seems to work. Except when you are trying to restore and find that you can't.

    Apple has published a specification for network devices that works with Time Machine. No third party provider, AFAIK, does meet this specification. They all use the application of Netatalk incomplete, obsolete Apple Filing Protocol.

    Apple does not endorse any device third-party network for use with Time Machine. See this support article.

    Network backup, use as destination an Apple Time Capsule or an external storage device connected to another Mac or a 802.11ac AirPort base station. Only 802.11ac base stations support time Machine, not older model.

    Otherwise, use Time Machine at all. There are other ways to save, although none of them are nowhere near as effective or as well integrated with OS X. I don't have a specific recommendation.

    If you are determined to continue to use the device with Time Machine, your only remedy for any resulting problem is the manufacturer (who will blame Apple, neither you nor anyone else but herself.)

  • Cannot make or receive phone calls after the upgrade to iOS 9.3

    Can't scream: cannot make or receive phone calls after the upgrade to iOS 9.3

    SOLVED

    Went into settings,

    Cell phone,

    Cellular data options,

    then change the setting to EnableLTE OFF,

    It's for my at & t att, iphone 6 s

    No joy for me.  I can't make calls, but I can not receive or use call forwarding.  So frustrating!

  • Unable to make or receive phone calls after installing IOS 10

    Unable to make or receive phone calls after installing IOS 10

    Hi Drovers run,

    I understand that after updating your iPhone to iOS 10, you are more able to send or receive phone calls. I know it's important to be able to use your iPhone as a phone, so I'm happy to provide assistance.

    Read this article to help to make and receive calls:
    If you cannot make or receive calls on your iPhone - Apple Support

    Thank you for using communities Support from Apple. See you soon!

  • ENVY 100 printer D410 - screen says "Do not, power down during the update" permanently.

    I'm a Mac user Mavericks 10.9.1 running on a Mac Book Pro.

    I have a HP ENVY 100 D410 printer that works your for a few years.

    Recently, the LCD screen of the display on the printer offered, "there is a new driver. You want to update? "(Yes/no)

    (Or something close to that.)

    Unfortunately, I chose 'yes '.

    The printer then tried to update, but eventaully the LCD screen on the printer displays a flashing message:

    "Do not feed, down during the update"

    The printer now flashes just this screen continuously. The LCD screen will not display anything other than this message.

    The printer works when connected by cable and wireless. (Airprint works very well).

    I can scan documents, I can print pages, I can even access printers "Web page.

    But the LCD touch screen control panel is 'stuck' in flashing update message.

    I can't find any way to clear this error and allow the printer to complete the update.

    Help. Please, I beg you.

    Hello

    There is a fix to resolve the specific problem, but I'm afraid it is only available for earlier operating systems under OS X 10.5 and 10.6, Windows XP, Vista or 7.

    I you suggest to get a computer with any operating system supported, install the latest version of the software on the HP site using a USB and then follow the steps.

    The latest version of the software can be found below (the basic software should be sufficient):

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&OS=4062&product=4073738&softwareitem=MP-92513-1&sw_lang=&

    Make sure that you carefully go through the procedure to the installation section in the patch download page.

    Hope that helps,

    Shlomi

  • Message "do not power down during the update"control panel screen not fade.

    Product name: HP ENVY 100 e - All - in - One Printer D410a

    Product no.: CN517A

    The message "Do not power down during the update" on the control panel of the printer refused to erase and remained perpetually disaloowing acess the Menu home for other actions as photocopies etc.

    I see.  I found this utility that will help you to solve the problem.  It seems the printer lost connectivity during an update firmware and glitch out.  The utility should take care of it.  Let me know what happens.

  • Every day I receive a notice that someone on my computer using the same I.P. address

    Title of the Moose: I. Address of P.

    Every day I receive a notice that someone on my computer using the same I.P. address but yet I found nothing of canoe

    Hello

    (1) work on a domain network?

    (2) how long have you been faced with this problem?

    (3) what is you receive the exact error message?

    Method 1:  If it is a small network of computers on homegroup, contact the person with administrative rights system on your network.

    Method 2:  Make sure that the network card is configured according to the manufacturer's specifications and that the configuration is not incompatible with the other hardware configurations.

    Method 3: Run Microsoft Security scanner (MSS) to any threat and try to correct
    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: Infected files can be deleted from your computer; There is a chance of data loss.

    Method 4: download and install all available Windows Update

    Install Windows updates
    http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

    If you are working on a domain network, then please post your query on the TechNet forums for more specialized help.

    TechNet Forum

    http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

  • Black screen when the phone call after 5.1

    The screen loses response (black screen) on the call (after dialing) after 5.0 OTA. But it works well if I plug headphones. The screen can also recover the black screen after I have connect a listener.

    Do you have a case on your phone? It can interfere with the proximity sensor and turn the screen black... it is supposed to do after you hold the phone to your ear/head so that your face not to accidentally push buttons.

    If it does when you do not hold your phone to your face/head/ear then something else is triggering the sensor of prox - often a case which is near the prox sensor, or a protective screen that is not clear in this area can cause this.

  • Cannot make or receive phone calls after the upgrade to iOS 9.2

    Last night, I could make and receive phone calls. This morning I upgraded to iOS 9.1 to 9.2, and now I can't make or receive calls.

    Any call I make - other iPhones, to landlines, whether on my list of Favorites or not - says 'call X... '. "(where X is the name of the contact - X is omitted if I don't dial a contact). After a few seconds, the phone says "Call ended." and I get three quick tones.

    When they call me, it goes to voicemail once they hear 1 or 2 rings. I don't hear anything. The call does not appear in the 'recent' folder, but I received a voice message.

    I don't have to "do not disturb" lit.

    My iPhone is a 4 s, which can be a key because my wife has a 5. She has just upgraded and has no problem with calls. We are both on the Sprint network, using 'Ting' which is a dealer - so our actual provider's Ting. My phone says "Version 9.2 (13 c 75)", carrier "Sprint 23.0" and model MD377LL/A."

    I turned the phone on and off several times, and also to do a reset (now hold both power and home until the apple logo appears). neither helped. I double-clicked the original key and removed the phone application and all other applications, then restarted the phone application, which also helped.

    WiFi works.

    A related issue is to: IOS 9.2 update .

    OK, now it works.

    I think that what I had was specific to my carrier - as well as anyone with this problem likely needs to communicate with their provider!

    For Ting (Sprint), here's what I had to do:

    1. to connect to a Wi - Fi network

    2. dial # 873283 #.

    3. press the call key

    4. press "Start Service Update" and wait a minute or two.

    5. press on "Full Service Update" and wait a minute or two for the phone to reconnect to the Sprint network.

    6. once the upper line shows that Sprint is connected, I could make and receive phone calls.

    Greg

  • SBH52 don't make phone calls after the installation of Marshmallow

    Hello

    I upgraded my Z3C Marshmallow Android and since then, the SBH52 does not allow me to make phone calls from the call log.

    I had similar behavior original lollipop but discovered "Call Log Smart Extras" had to be installed and the problem solved.

    However, after upgrading to the marshmallow and noting that I couldn't dial from the SBH52, I uninstalled and reinstalled Smart Connect, SBH52 app and Call Log Smart Extras but everything remains the same. I also tried disconnection and reconnection of the headset to the phone, both via NFC and Bluetooth.

    The headset works. I can 'throw' music, audio, videos and maintain telephone conversations. I can also access the call log and read SMS.

    If I want to hang up, I can still do it by pressing the big round button on the front of the helmet, so my problem is not this one:

    http://talk.sonymobile.com/T5/wireless-accessories/SBH-52-on-Android-6/m-p/1051004#M7193

    Everyone found this problem too? Is there a solution?

    Thank you.

    I wonder there was an update for applications, but resumed making phonecalls through SBH52

  • BlackBerry Smartphones locking the screen during a phone call...

    I'm just not see it or are at - there no way to lock the screen during a phone conversation? I continue to cut the call when I use my shoulder to hold the phone (Yes, I have a bluetooth connection and I know that that would solve the problem) but I mean the screen of my voyager locked when I was in a call!

    Help!

    Thank you, Mike. This looks like a great product.

    One question. What use the 'flash' function when a call comes in, or if the keys must be used (i.e. to navigate a phone system)? Is it possible to disengage and engage the program?

  • Hang up a phone call during another phone call

    My Treo 750 gave me an option to hang up the current call or ignore the second call with a text message.  The Palm Pre does not seem to allow me to hang up a call, if I got another call with call waiting.  Two calls to unplug once I hang up the second call.  It is a huge problem that no one else can get it for me while I'm on the phone in this situation until I got hang up a call I'm on.

    How to hang up a call during a second call?

    Thank you

    mcg_man

    Please take a look at this thread: http://forums.palm.com/palm/board/message?board.id=webossoftware&message.id=8913&query.id=72719

  • HP Envy stuck with message "Do not feed, down during the update"

    I tried to install the updates from the menu of the printer, but now he constantly says: "do not, power down during updates. He did all day yesterday until I have is growing impatient and returned it works, but still displays the message once it lights. This has now been reading all night.

    I read somewhere a hard reset would work, but can't find anywhere how to do this.

    Can I print a Network Setup page and page of test very well.

    I can get Internet access to the printer.

    I would like to be able to see the printer menus again please.

    Kind regards

    Mike.

    The solution obtained from the phone HP Service Center:

    Firmware update:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-92884-2&cc=us&DLC=en&LC=en&OS=219&product=4073738&sw_lang=

  • BlackBerry Smartphones in levant calendar during a phone call.

    While on a phone call, I need to look at my calendar to see if I have something open one day requesting my caller.  How do I do that?

    Hello

    Press the menu button and you will be asked if you want to go to the home screen during the call, click Yes and go from there.

  • During a phone call he plays country music, both connected

    I'm sure this has been discussed before, but I can't find an answer. On my T-Mobile cliq when I start making a phone call ist plays a starnge Western song, until he starts rining or connects. Anyway to change this choice of music or turn it off?

    OK, I went to see if there was a way to disable it on the phone itself and I'm not. You can disable if you are registered on the T-Mobile website. But also look for the my account icon on your screens. There will show you your account information and the list of your features. He'll tell caller tunes for $ 1.99. This means its on and you need to call them to fix it. It will take more time to sit waiting as it takes for them to remove it.

Maybe you are looking for

  • I can't put it on the second drive in Satellite A300-1EG

    Hello The question is whether I can put on the second HARD drive for laptop Toshiba A300-1EG, there is a place for one I found and what HARD drive it's, I mean 2.5 "and etc? As I read, there may be no connection to HARD drive, depending on model, how

  • Antenna Apple TV screensaver is blocked on San Francisco

    Air screen saver works normally except what happens in San Francisco every time. It was working fine until about two or three weeks.

  • I received a call from someone claiming to be from Microsoft

    Hello 07/06/2011 I got a call from someone sounding forign claiming that he was from Microsoft and I had problems [virus]? with my computer, I know not how he got my phone number, I'm very careful with security on the computer, he asked if I was on t

  • How many times we use programs

    I am new to windows Vista and I was wondering when I'm going to add or uninstall programs, how do I know how many times a program is used? It lets me know when it has been installed etc. but not how often. Thanks for your help!

  • The upgrade of the SATA 1 TB to 2 TB SAS drive sink r.620 Server

    Hello I have a r.620 with a H710 Mini Raid Perc.  I currently have 3 1 than TB SATA drives in a RAID 5 configuration and need more disk space.  Unfortunately, I have the bottom of basket, which only supports up to 4 drives. I tried to replace the dis