linux installation

Similar Questions

• How can I place the bookmarks from a Linux installation on partition commune/home for various Linux distributions on separate partitions for access?

  17 Firefox under Linux with Linux installations on separate partitions, with a repertoire common/home its "own partition.

  I would like the json files to appear only on the / Home partition and each instance of Firefox to read and write files json here only

  Hello

  One way would be to start the Firefox Profile Manager in each Linux instance and that it points to a profile of another Firefox installation folder, preferably one that has been customized in a satisfactory manner. You can then delete the profile by default in every Linux installation.

  Profiles Howto

  Profiles of school boards

  Files & profile folder

• Tecra S3 RAID-0, the Linux installer does not recognize the hard drive

  Hello

  I've been googleling much and the only one I found is a post on this forum: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=8758

  I have the same problem, the RAID controller is not recognized by one of the distributions of linux in circulation, and so the hard drive is not recognized, so the linux installation is not possible. I tried FC7 and SUSE9. Due to the demands of work, I need to install FC7.

  If there is no driver available for linux, it is possible to disable the RAID controller on the laptop? If so, is that someone could put a guide of how do, or send me to a good link on the subject?

  Thank you
  Alex

  You will be very happy if someone with S3 and Linux will write here. Until you wait for the check you must fill the pages of Linux support:
  http://Linux.Toshiba-DME.co.jp/Linux/index.htm
  http://newsletter.toshiba-tro.de/main/index.html

  Maybe you will find some info here.

  Bye and good luck!

• Linux installation - I can not find the installation script

  I'm trying to follow the LabVIEW for Linux installation guide, but I have a problem. This post will be long, as I will try to tell you what I've done so far. I am also kind again on Linux, so I don't know there are a lot of things I don't know.

  I try to use http://www.ni.com/pdf/manuals/374718a.html#installing

  and http://www.ni.com/pdf/manuals/375845d.pdf

  First step of the guide is to insert the installation media "' and run

  # sh. / INSTALL

  and it's pretty easy. Or at least it would be if I had no idea where that sh file is. I requested a copy of the installation discs for my University (I install on one of their computers), and they said that while they do not have any what Linux install disks, they were pretty sure "it's here somewhere," whatever that means. This seems to be the extent of their knowledge about linux.

  On this disc is a folder named slcp10 with the content slcp10.cab, slcp10.mis, and slcp200_mft.cab, which are all of the files of windows and as far as I can tell cannot be run under linux, unless I'm using WINE, which is clearly not the way to go.

  I have also some ISOs from the Department of licensing website, but also, no one seems to know anything about installing Linux. After you mount the ISOs, I see that they contain records Bin, Common, Distributions, licenses and Readme (which is full of all kinds of trivial things). They also contain the files academicsitelicense.html, asladminresource.html, autorun.exe, autorun.inf, nisuite.xml, patents.txt, readme_core.html, setup.ede and suite_md5_1.xml, which none do look promising. Again, I know only how to install .exe files using WINE.

  I have since then turned to the internet to try and download directly from OR and went to http://www.ni.com/download-labview/ and selected ' already own LabVIEW? Download the latest version. From there on, I select the drop-down list for alternative OS and select MAC OS x I read somewhere on the help pages OR that it would work on a linux machine (which seems logical, that the MAC is UNIX-based, right?). Well, it gives me a file dmg (apparently some sort of file mac?) I found a way to use Linux by extracting in 7zip and then ride the hfs file. It always seems to be some sort of evaluation program because it contains LabVIEW2014Evaluation.pkg, readme.html (which takes me to the installation of OSX readme-useless), installation_guide.pdf (again, only for MAC and useless for me), drivers.webloc and Extras files and licenses.

  I'm at the end of the roll, man. I feel that I'm taking crazy pills. I've never had so many badly installed a program before in my life, because technically I haven't yet started the process of installing again, and I'm already about to defenestrate from my computer. Please help me. I don't know what else to do, and I don't know there is a very simple solution that I am too ignorant to see.

  Our lab run us windows, and cake installation. After learning Linux over the last months, I never thought I would say this, but in fact, I would like to have a machine windows right now.

  Well, I managed to get installed it, but only because I found another ISO of site licensing department which had linux install files. Curiously, this unique ISO is a bit 3 GB while there are three other ISOs each come at least 7.5 GB. Are there really that many missing packages on Linux?

  Sorry if someone reads this has similar problems, but the best I can do is tell find Linux installation disc.

• Sharing location for catalogue and RPD on a linux installation

  Hello

  I am planning to do evolve horizontally an OBIEE 11.1.1.1.7 install and need to provide a location for the shared catalog and RPD by the Oracle documentation. Currently, the documentation refers to an example of installation of Windows in which you specify a UNC path in the EM console. All the world did this on a Linux installation? I need to set up a system of local files first to point to our NAS share?

  Any help is appreciated.

  Kind regards

  K.A.

  Yes, you need to mount the NAS between your linux servers, so this way you can place the RPD and the catalog and the cache in a path shared by creating folders and copy these files here, and even set in EM.

• Tecra S11 - 11G - Linux installation

  Hello

  I got a Tecra S11 11 G and I want to install Linux Mint on it.
  During installation, I get the error that 'acpi CCP probe failed.
  I googled for the last hour and I discovered that it can be connected to the uefi boot mode.
  But my laptop has uefi?
  Does anyone know what I can do to fix this?

  Thank you
  Theboda

  You can run Linux Mint live view? If so, start Linux Mint in direct mode and run GParted. In the GParted menu bar, click view , and then click device information. If the partition table is reported as TPG, the hard disk is partitioned probably for UEFI. Another control, you can do is to search a tagged partition ESP. An ESP partition indicates also that UEFI is in use.

• Click-Mini satellite L9W - B - Linux installation issues

  Hello

  I try to install linux on a toshiba mini-click L9W - B. Since I was able to boot with the USB (UEFI only) I've got trouble finding drivers to be able to use the card Wifi and the keyboard Dock.

  Ony 8.2 debian is able to start with a touchscreen to work but without network...

  Is anyone have positive results in the deployment of linux on toshiba mini-click L9W - B? Any working linux distribution?

  Thank you
  Best regards, Freddy.

  Given that I have no answer, I will publish my own test results here:

  From my own tests with toshiba mini click, you'll be able start vfat usb key with a well formatted starting efi directory and file (/ efi in your USB). BIOS even in version 5.10 can't start legacy.

  8.1 32-bit Windows usb Windows 8.1 build key is able to start on click mini (ntfs file system) and 64-bit Windows usb key build of Windows 8.1 8.1 64-bit does not start on click mini. I suspect, that chat on the forum of the EU of toshiba, toshiba mini click bios to start using 32-bit efi startup plans on efi/boot/bootia32.efi.

  Here's a way to start any distro of linux of your mini click using a usb key with the vfat file system:
  1 - try to boot with a USB stick to gparted (vfat file system)
  2. get the boot efi files / (including a grub.cfg file)
  3. use the directory/boot/efi on the new USB that you create, you have managed to boot linux change efi/boot/grub.cfg.

  Try Manjaro (ArchLinux) distribution, this distribution has the best material of support right here. 15.04 - Ubuntu or Debian - 8.2 may work in some time, always missing drivers in the installation process.

  Posted by ffrouin
  

  Hello

  I try to install linux on a toshiba mini-click L9W - B. Since I was able to boot with the USB (UEFI only) I've got trouble finding drivers to be able to use the card Wifi and the keyboard Dock.

  Ony 8.2 debian is able to start with a touchscreen to work but without network...

  Is anyone have positive results in the deployment of linux on toshiba mini-click L9W - B? Any working linux distribution?

  Thank you
  Best regards, Freddy.

• Equium P200: realtek ethernet adapter Linux installation error

  I have an old Equium P200 - 1Ed, who started to play up.

  When I try to install Linux, it gives me an error for realtek ethernet adapter and I studied the problem on the forums.

  Apparently, my hard drive is old and decrepit.

  I tried to reinstall Vista from the default Toshiba CD, just out of curiosity, and installed fine, except, seemed unwilling to connect internet.

  Tried Linux, but still the same problem from realtek.

  Apparently I can download the driver bios flash and try to reinstall the bios... it looks like my last hope.

  Anyone know where I can get the bios driver for P200-1ED?

  Updates to the BIOS, you can find on toshiba BIOS support page - http://eu.computers.toshiba-europe.com/innovation/download_bios.jsp

  To be honest I don't know if the BIOS update will help with the installation of Linux, but you can try it.

• Satellite L650 - 10 M - Fendora Linux installation problem

  Hello

  I have an urgent problem.
  I tried to install F8, F9, F10, F11 and F13 direct but all gave the same problem which is I can't install the operating system.

  the problem is that Fedora can not communicate with ATI Radeon HD 5145... the installer crashes just straight up
  sometimes crashes when it tries to run anaconda...

  Now F10 X86_64 was installed normally, but after the first reboot... he become crazy... and started posting garbage... going to init 1 and you try to run the GUI I have X Server error.

  also the ubuntu worked too much

  My laptop is
  Toshiba Satellite L650 - 10 M
  Processor Intel CoreTM i3 - 330 M (2.13 GHz, FSB:1066 MHz, 3 MB level 2 Cache)
  2 048 MB of memory DDr3 (1066 MHz) of system RAM memory
  320 GB disk sata hard
  Mobility of the ATI Radeon HD 5145, dedicated 512 MB up to 2 810 MB Graphics
  Wireless 802.11 a/B/G built-in Wi-FiTM; Bluetooth

  Help please

  Have you tried to visit a few Linux forums and the search for solutions?
  As you know Toshiba doesn't support Linux on the laptop model, and you'll be really lucky if someone has the same model of laptop and the same problems of Linux.

  On Linux forums, you can chat with others about installing Linux on different laptops, but with a similar hardware configuration.

• Satellite L770D - 10 M: Linux installation cut off my warranty?

  Hello
  I bought a Satellite L770D - 10M and I have "a user of linux opensuse
  Can I reformat the hard disk in order to install opensuse without losing the warranty?
  Thank you

  Of course you can do it. You can do with your computer laptop all you want.
  Before installing Linux create recovery disk. One day if you want to still have factory settings use this disk for the installation of Windows operating system.

  If you install Linux without create recovery DVDs, you can do this but follow Toshiba recommendation on the creation of recovery DVDs.

• Need help from the United Nations, Linux installation

  I would like to remove Linux and re install Vista. Can someone tell me how?

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Conflict Version Java problem on ADR 3 Linux installation.

  Hello

  
  

  I installed 3 ADR in vmware in Oracle Linux 6.5 64-bit. It works fine, no problem. Now in my production server, I try to install 3 ADR in Oracle Linux 6.2 64bits. Oracle HTTP Server 11 (web tier) is also installed in the same server. I can't wait to move from ESO of Glassfish/ADR REST Full web services Apex 4.2.6 support. Now I have also installed Glassfish Server 3.1.2.2 successfully.
  

  
  

  When I run the command

  
  

  Java $-ords.war advanced pot installation

  Suite error indicates:

  Java $ [oracle@myserver ords3] - installation of ords.war advanced pot

  Exception in thread "main" java.lang.UnsupportedClassVersionError: oracle, dbtools, jarcl, Entrypoint: version unsupported major.minor 51.0

  at java.lang.ClassLoader.defineClass1 (Native Method)

  at java.lang.ClassLoader.defineClass(ClassLoader.java:634)

  at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:142)

  at java.net.URLClassLoader.defineClass(URLClassLoader.java:277)

  to java.net.URLClassLoader.access$ 000 (URLClassLoader.java:73)

  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:212)

  at java.security.AccessController.doPrivileged (Native Method)

  at java.net.URLClassLoader.findClass(URLClassLoader.java:205)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:321)

  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:294)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:266)

  The main class is not found: oracle.dbtools.jarcl.Entrypoint. Program ends.

  I suspect it's the Java version number so I checked the version

  Java-version

  Java version "1.6.0_22".

  OpenJDK (IcedTea6 1.10.4) runtime environment (rhel - 1.41.1.10.4.el6 - x86_64)

  OpenJDK 64-bit Server VM (build 20, 0 - b11, mixed mode)

  Then I installed the jdk 1.7... and control changes in fact file installation in bash_profile as follows:

  JAVA_HOME=/usr/java/JDK1.7.0_79; Export JAVA_HOME

  Path=$path:$JAVA_HOME/bin:/usr/java/JDK1.7.0_79/JRE/bin; export PATH

  but the version of java is always 1.6.0.22. Now, since ORDS3 requires jdk 1.7... I think the problem is with the version of java. But I can't do the update java as the default jdk. How can I do it. Help, please

  
  

  Thank you

  Hasan Al Mamun
  

  Problem is resolved a little, or it was done one way or another.

  I created another server in vmware with OL6.0 64 bit. Java version is jdk1.6...

  Now, I have

  1 tar - vxzf jdk-7u79-linux - x 64 .tar .gz

  created by /usr/jdk1.7.0_79

  in the bash profile

  export JAVA_HOME=/usr/jdk1.7.0_79

  PATH="$path":/usr/JDK1.7.0_79/bin; export PATH

  2. now installed server Glassfish 3.1.2.2. then it took the JAVA_HOME for Installation.

  3. now, I issued the command

  ords.war advanced pot /usr/JDK1.7.0_79/bin/Java-installation

  Done with success.

  4. now, I could deploy deployment ords.war and i.war in Glassfish Server

  It works fine now.

  If the key was to install JDK 7 and set JAVA_HOME to java to update location prior to the Installation of Glasfish.

  Thank you

• OBIEE 11.1.1.7 Linux installation error

  Hello
  I'm doing OBIEE 11.1.1.7 Enterprise install on a Linux server. When I run the Setup, after you specify the installation location, when I set up the components (select BI Enterprise Edition, BI Publisher) I get error as ORACLE_HOME variable is already set and I should remove it and re-run Setup.
  
  He already has Oracle 11 g DB installed and variable ORACLE_HOME points to that location. How to solve this problem?
  
  Thank you

  You can try to use unset just before you run Setup:

  unset ORACLE_HOME
  . / runInstaller

• Apex 4.2 Linux installer

  Hi all
  
  Is the Installer Windows Apex the same file used to install Linux database?
  
  Thank you very much.

  "yxes2013,"

  This is the same file download and installation for all platforms. Ultimately, installation of the APEX is carried out via a SQL script that is executed through SQL * more.

  Joel

• OraDB 11g 2 on Oracle Linux installation

  Can someone help me with the installation of Oracle Database 11 g in Oracle's Linux!

  The Oracle supported only on Linux 6.x database currently is 11.2.0.3, which can be downloaded from https://support.oracle.com - see my post above

  Srini

• OEM clinet on Linux installation issues

  Hello-
  
  I'm stuck during the installation of the OEM (Linux_x86_64_Grid_Control_Agent_11.1.0.1.0) Linux client. This is my environment:
  

  <db1> cat /etc/*-release
  Oracle Linux Server release 6.1
  Red Hat Enterprise Linux Server release 6.1 (Santiago)
  Oracle Linux Server release 6.1
  <db1> 

  Linux version 2.6.32-131.4.1.el6.x86_64 ([email protected]) (gcc version 4.4.4 20100726 (Red Hat 4.4.4-13) (GCC) ) #1 SMP Wed Jun 15 13:25:00 EDT 2011

  I use the installation in silent mode as follows:
  

  . runInstaller -silent -responseFile    /app/oracle/dist/linux_x64/response/erpdba_additional_agent.rsp

  Installation gets stuck on this:
  

  Starting Oracle Universal Installer...
  
  Checking Temp space: must be greater than 150 MB.   Actual 762 MB    Passed
  Checking swap space: must be greater than 150 MB.   Actual 4041 MB    Passed
  Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-05-02_09-34-03AM. Please wait ...<cmsprddb1.es.gwu.edu:OEMAgentR1v11101> Warning: Is the following line present in /app/oracle/dist/linux_x64/response/erpdba_additional_agent.rsp correct?
  MYORACLESUPPORT_USERNAME=
  
  Warning: This line is not added to HashMap
  Warning: Is the following line present in /app/oracle/dist/linux_x64/response/erpdba_additional_agent.rsp correct?
  MYORACLESUPPORT_PASSWORD=
  
  Warning: This line is not added to HashMap
  Warning: Is the following line present in /app/oracle/dist/linux_x64/response/erpdba_additional_agent.rsp correct?
  COLLECTOR_SUPPORTHUB_URL=
  
  Warning: This line is not added to HashMap
  Warning: Is the following line present in /app/oracle/dist/linux_x64/response/erpdba_additional_agent.rsp correct?
  PROXY_USER=
  
  Warning: This line is not added to HashMap
  Warning: Is the following line present in /app/oracle/dist/linux_x64/response/erpdba_additional_agent.rsp correct?
  PROXY_PWD=
  
  Warning: This line is not added to HashMap
  Warning: Is the following line present in /app/oracle/dist/linux_x64/response/erpdba_additional_agent.rsp correct?
  PROXY_HOST=
  
  Warning: This line is not added to HashMap
  Warning: Is the following line present in /app/oracle/dist/linux_x64/response/erpdba_additional_agent.rsp correct?
  PROXY_PORT=
  
  Warning: This line is not added to HashMap
  *** Check for updates ***
  *** Select Installation Type ***
  *** Check Prerequisites ***
  *** Specify Oracle Management Service Location ***

  And it just sits there. Here is the log:
  

  oracle.sysman.install.oneclick.EMGCInstaller
  -scratchPath
  /tmp/OraInstall2012-05-02_09-34-03AM
  -sourceLoc
  /app/oracle/dist/linux_x64/agent/install/../stage/products.xml
  -sourceType
  network
  -timestamp
  2012-05-02_09-34-03AM
  -nowelcome
  -silent
  -responseFile
  /app/oracle/dist/linux_x64/response/erpdba_additional_agent.rsp
  INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
  INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
  INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
  INFO: *** Check for updates ***
  INFO: The Option selected is skip
  INFO: *** Select Installation Type ***
  INFO: *** Check Prerequisites ***
  INFO: The PrereqLoc is: /app/oracle/dist/linux_x64/agent//stage/prereq
  INFO: *** Specify Oracle Management Service Location ***
  INFO: validating variable: ORACLE_AGENT_HOME_LOCATION
  INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1

  What can be? Help, please.

  If a silencer, you will have with 11 and do not use parameters support

  defined in the answer file

  SECURITY_UPDATES_VIA_MYORACLESUPPORT = FALSE
  DECLINE_SECURITY_UPDATES = TRUE

  and at least you get the warnings should be ignored.

  Published by: deebee_eh on May 2, 2012 16:24