-> Lion (Delete Boot Camp Partition) Snow Leopard?

I am currently on an iMac under Snow Leopard 10.6.8 (2.4 Ghz C2D, 4 GB of RAM, with VMware 3.1.3). I have Windows XP as a Boot Camp partition, but recently, I've downloaded the tool VMware Converter from VMware and I am now running XP via a Vitural Machine (saved in the My Documents folder).

I can't install Lion because it cannot create the recovery disk and there is an error with my scores (I don't remember the exact wording). I'm guessing that it's because of my Boot Camp partition that has XP installed on it, which is no longer compatible with Lion.

My question is: since I converted the Boot Camp partition in a Virtual Machine, can I remove the Boot Camp partition and still be able to run XP?

It's on my iMac at work, and I rely on XP for 75% of my work, so I make sure that I always have access to XP via the Virtual Machine.

Thanks in advance!

My question is: since I converted the Boot Camp partition in a Virtual Machine, can I remove the Boot Camp partition and still be able to run XP?

The short answer is Yes.

The longer answer is to make sure that you run only a normal file based Virtual Machine and a virtual Boot Camp Machine partition not before deleting.

It's on my iMac at work, and I rely on XP for 75% of my work, so I make sure that I always have access to XP via the Virtual Machine.

If there is a system of work, then you shouldn't be move to Lion still and wait for at least the first version of Lion and a version of VMware Fusion, which is officially certified to be fully compatible with Mac OS X Lion before the upgrade.

Tags: VMware

Similar Questions

  • Several Boot Camp Partitions appearing

    Hi, I have recently updated my Boot Camp drivers using the Snow Leopard disc. Everything works well in Boot Camp, but I noticed that when I run merge very often I receive duplicates of my Boot Camp partition inside my library of Virtual Machine. I delete the partitions 'extra' in the library of the VM, but they tend to come back. I do not use my Boot Camp partition in the merge but I want to make to the cause of the problem, ever, this happened with the former Boot Camp drivers supplied with Leopard and has started only after the upgrade. So if anyone has experienced this problem and is there any kind of fix?

    Thank you

    1 Apple does not guarantee the name of BSD to a drive between reboots.

    2 VMware unfortunately and inexcusable was unaware when they designed Fusion and as such when OS X assigns a name different from BSD on a disc, then it previously and when this disc has a partition Boot Camp that has already been established to run as a Virtual Machine, then two or more entries for the partition Boot Camp one can and will appear on the library Virtual Machine in all versions of GA merger to date.

    It is more common on a Mac Pro however I knew it with a MacBook Pro and especially when after attached external drives with a Boot Camp partition on them. On a Mac, which has a single hard drive and only one partition for OS X and a partition for Windows, it is less likely to occur compared to the Mac Pro, which often have more then an internal drive however I have experienced it on a MacBook Pro in by itself but it is more likely to occur when several hard disks are at stake.

  • Unable to access the Vista Boot Camp partition.

    I've got Snow Leopard 10.6.2 on an iMac Intel Core 2 Duo 3.06 GHz with 4 GB of ram.  My version of Fusion is 2.0.6.  Vista Home Premium (32-bit, of course) is upgraded to SP2.  All I am able to do is a blue screen of death when I try to access my Boot Camp by merge partition.  This senario has never worked for me.  I just use Fusion to access another copy of Windows that I designated merger.  The exact code is available on the attached screenshot.  I am able to access my Boot Camp partition without problems on a restart.  I looked for a specific answer to my problem with no luck.  The only thing I've tried so far is increase the default 512 MB available ram (I think) to about 2 GB.  Please help me to solve my problem.

    Thank you

    Sean

    This gives a test:

    http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1007351

  • The Boot Camp Partitions drive and abandon

    I am running OS X El Capitan, Version 10.11.5 early 2016, 12 inches and I am trying to load Windows 8.1 Pro using Boot Camp.  (ignore what is in the product box)

    Boot Camp successfully created a program loading of Windows, including the Apple drivers on my USB.

    I was able to successfully partition my HDD 256GB.  50 GB for Boot Camp and ~ 200 GB for my OS X.

    After the partition, the Boot Camp program is finished and I have a screen with my Mac OS disc and my Boot Camp disk.   My Boot Camp drive is completely empty.

    When I restart the Boot Camp, I gives me the possibility to remove the disc from Boot Camp.

    How can I load Windows 8.1 on my Boot Camp drive?   Should I delete the disk Windows/Boot Camp Partition and start again?

    Macs 2015 and more late do not use a USB Installer. Disconnect the external storage, launch BCA, delete the current Windows partition and start all over again. You must put the ISO of Windows in your Documents folder and it must be dismantled.

    Please see https://help.apple.com/bootcamp/assistant/6.0/#/bcmp173b3bf2 for help.

  • Windows 10 could not locate the boot camp partition

    I'm trying to install 10 Windows on an iMac end of 2015 with a 512 SSD.  With the help of Boot Camp and an ISO of Windows 10, I am able to create the Bootcamp partition and the iMac restarts in the Windows of Windows installation. I enter my product key for my Windows 7 DVD and reach the screen showing partitions.  I select "disk 0 Partition 5 Boot Camp" partition and click on 'Format' according to the Apple support document.  The partition is then renamed to 'Drive Partition 0 5'.  When I select the next button, I get the following error message:- "we couldn't create a new partition or locate an existing one.  For more information, see the Setup logs files'.  The Windows Installer does not progress.  I deleted the partition several times using bootcamp and restarted the installation and always get the same failure.

    Any advice on how to install Windows would be greatly appreciated.  Boot Camp 6 will let me install Windows 7 on the iMac and so I need to use Windows 10.  I guess the Windows 10 ISO downloaded from Microsoft will work with the Windows 7 product key and Setup seems to accept it.

    Please, disconnect all external storage devices to your iMac and run the following two procedures.

    Reset the management system (SCM) controller on your Mac - Apple Support

    How to reset the NVRAM on your Mac - Apple Support

    and now try BC Assistant.

    See also Boot Camp: "we could not create a new partition or locate one" alert during the installation of Windows 8 - Apple Support .

  • How can I move XP on Boot Camp partition in a virtual machine on a new iMac?

    Yesterday, I bought a new iMac to replace an iMac Core Duo older. I was running XP on Boot Camp partition and using Fusion to access. As the new iMac custom supports XP on Boot Camp partition, I want to use VMWae Fusion to run XP in a virtual machine on the new computer. Is there a way to get the current state of XP (with all the security and the SP3 updates) now on my Boot Camp partition, more than one virtual machine on the new computer?

    No offense intended... Have you even read the linked web page and or documentation of Paragon go virtual?

    In short, could start the Boot Camp partition natively, install and run Paragon go virtual to create a Virtual Machine in VMware Boot Camp partition and run the resulting Virtual Machine with VMware Fusion on the new Mac.

    Then you can do what you want with the old computer after deleting the partition Boot Camp with Boot Camp Assistant as you can't keep physical installation on the old system if your running a virtual copy of it on another system without purchasing another license from Microsoft.  Also, you will need to reactivate Windows XP and other software that follows what material it was initially installed on the virtual machine.

    Note: You can even create a Virtual Machine from the Boot Camp partition with VMware Fusion in two different ways, or even to use VMware vCenter Converter such as the use of virtual Paragon to go however I strongly recommend using Paragon go virtual methods due to what I consider a major flaw in the way they create the virtual hard disk when you use the command import on the Boot Camp partition and a rate higher failure by using the other methods/software VMware VMware compared to Paragon go virtual.  For the non-technical user Paragon go virtual is the best way to go IMO and the entire process usually takes less time, then the methods of VMware.

  • Changed the size of the Windows Boot Camp Partition - now merger does not

    My Windows partition was too large, so I used the scroll bar in Boot Camp to reduce its size.  Start directly on Windows (via system preferences) works very well.  However, I got an error message (I should have written it, but it didn't) when you try to start Windows using the merger.  I uninstalled and reinstalled the merger, but now when I start it up I got a message "no boot device found".  I would still be able to use the merger through the Boot Camp partition.  My thought is that the easiest way would be to completely remove Fusion, because the Boot Camp partition works fine on its own.  Apparently, the rest backout package still some files on the hard drive that caused the errors after reinstall.

    Any ideas on how to remove all traces of Fusion I can do a completely new reinstall?

    VMware Fusion of uninstalling/reinstalling will not solve this problem, and all you have to do is delete the partition Boot Camp package of Virtual Machine that is basically just meta-data and does not affect the physical Boot Camp partition by deleting.

    Note: These senses are different which have already been posted so read and follow through... Note: These steps assume that you have a single Apple to default installation of Windows on a single Boot Camp partition and Boot Camp of VMware Fusion single default partition Machine virtual (without a snapshot *) and if you have changed the partition Boot Camp Virtual Machine to add additional hard disks to be virtual or RAW disk then do not use these instructions unless you backup the Boot Camp partition the Machine package virtual first. * Also note that Fusion 2.0.0 may accidentally have a snapshot with the virtual partition Boot Camp Machine and it should not have, then you should check to ensure that the condition does not exist as well. (With merger closed if the partition Boot Camp Virtual Machine package is over 1 MB in size, then you might have a snapshot in place and do not continue with these instructions.)

    ===

    1. If the merger is open, close it.

    2. in a Terminal (/ Applications/Utilities/Terminal) copy and paste command, as the following and then press Enter and it will delete the partition Boot Camp Virtual Machine of the metadata and the Virtual Machine to help.

    Note: This does not affect the Boot Camp partition install windows in that it does not remove it.  Also be sure you copy all the command line below, as well as, "RM" at the beginning of the ' (quote) after the s in the Machines. "

    RM - dfr "/Users/$ the specified item was not found./Library/Application Support/VMware Fusion/Virtual Machines/Helper/naos-1.0.vmwarevm/vmware.log ' ~/Desktop/Helper_vmware.log

  • Problems with Windows 7RC in the Boot Camp Partition

    I have Windows 7 RC (32-bit) running on a Boot Camp partition on a 2nd generation of MacBook Air.  When I try to load it in VMWare Fusion 2.04, I get a BSOD just after the "Starting Windows" screen finishes loading.  It says that Windows has detected a problem, try to restart and executes the boot system diagnostic tool, nothing helps.  I tried implementing VMWare using Vista and Windows Server 2008, 1280 MB RAM and 3D on and outside.  Any ideas?

    akuska wrote:

    I have Windows 7 RC (32-bit) running on a Boot Camp partition on a 2nd generation of MacBook Air.  When I try to load it in VMWare Fusion 2.04, I get a BSOD just after the "Starting Windows" screen finishes loading.  It says that Windows has detected a problem, try to restart and executes the boot system diagnostic tool, nothing helps.

    At the time current Windows 7 in any version is not supported by Apple on the Boot Camp partition, nor is it supported in any way under Fusion.

    Although it is not supported, it will work however it depends what Guest select you when the virtual machine based on the creation of a regular file.  I don't got no problem using Windows Server 2008, when the virtual machine based on the creation of a regular file.

    On your Boot Camp partition was a clean build or you have an existing Boot Camp partition previously Virtual Machine.  If you had a Boot Camp existing partition previously Virtual Machine then try the following.

    ====================

    Note: These senses are different which have already been posted so read and follow through... Note: These steps assume that you have a single Apple to default installation of Windows on a single Boot Camp partition and Boot Camp of VMware Fusion single default partition Machine virtual (without a snapshot *) and if you have changed the partition Boot Camp Virtual Machine to add additional hard disks to be virtual or RAW disk then do not use these instructions unless you backup the Boot Camp partition the Machine package virtual first. * Also note that Fusion 2.0.0 may accidentally have a snapshot with the virtual partition Boot Camp Machine and it should not have, then you should check to ensure that the condition does not exist as well. (With merger closed if the partition Boot Camp Virtual Machine package is over 1 MB in size, then you might have a snapshot in place and do not continue with these instructions.)

    ===

    1. If the merger is open, close it.

    2. in a Terminal (/ Applications/Utilities/Terminal) copy and paste command, as the following and then press Enter and it will delete the partition Boot Camp Virtual Machine of the metadata and the Virtual Machine to help.

    Note: This does not affect the Boot Camp partition install windows in that it does not remove it.  Also be sure you copy all the command line below, as well as, "RM" at the beginning of the ' (quote) after the s in the Machines. "

    RM - dfr "/Users/$ the specified item was not found./Library/Application Support/VMware Fusion/Virtual Machines/Helper/naos-1.0.vmwarevm/vmware.log ' ~/Desktop/Helper_vmware.log

    ====================

    I tried implementing VMWare using Vista and Windows Server 2008, 1280 MB RAM and 3D on and outside.  Any ideas?

    VMware is a company so I doubt that you have implemented the company however, your statement is a bit ambiguous because it is not clear if your always talk your partition Boot Camp Machine virtual matter in Fusion, you tried to select each of them as an OS on the entrance of Boot Camp partition on the Virtual Machine library and it didn't help the Boot Camp Virtual Machine partition number or to be issues with creating virtual machines with these operating systems.

  • Unit works only with the Boot Camp Partition

    Hi guys - I searched the forums for a while and pretty well I came across all positions said that if the unit does not have to uninstall/reinstall VMware Tools.  I tried twice but nothing helped. I am very new to the merger, but for now I'm very excited/impressed with the trial version - I just everything works fine!

    Sorry to ask 2 questions in once, but someone pourrait' one also point me in the right direction on how to remove my bootcamp partition and strictly use VMware so that I can create snapshots and free up hard drive space?

    OSX 10.5.6

    Windows XP SP2 (bootcamp partition)

    VMware Fusion 2.0.4

    MacBook 1st Gen 13 "Core Duo 2 GHz, 2 GB memory

    Thanks in advance for helping me!

    drkenan wrote:

    How to remove my bootcamp partition and strictly use VMware so that I can create snapshots and free up hard drive space?

    If you want you can import the Boot Camp partition as a Virtual Machine based on a separate stand alone file, or you can install Windows from scratch.  After you import if desired you choose and you don't want to use Boot Camp natively or as a training Camp for the virtual partition Machine (not that any) and want to recover the space that the Boot Camp partition is far from taking the Macintosh HD you can then use the Boot Camp Assistant (/ applications/utilities/Assistant Boot Camp) to remove the Boot Camp partition to reclaim that space.

    For the import of the Boot Camp partition as a Virtual Machine based on a stand-alone file, take a look at: VMware Fusion (menu bar) > help > VMware Fusion help > creating virtual machines > import Virtual Machines > import the Partition Boot Camp

    Regarding the Boot Camp existing partition Virtual Machine...

    Note: These senses are different which have already been posted so read and follow through... Note: These steps assume that you have a single Apple to default installation of Windows on a single Boot Camp partition and Boot Camp of VMware Fusion single default partition Machine virtual (without a snapshot *) and if you have changed the partition Boot Camp Virtual Machine to add additional hard disks to be virtual or RAW disk then do not use these instructions unless you backup the Boot Camp partition the Machine package virtual first. * Also note that Fusion 2.0.0 may accidentally have a snapshot with the virtual partition Boot Camp Machine and it should not have, then you should check to ensure that the condition does not exist as well. (With merger closed if the partition Boot Camp Virtual Machine package is over 1 MB in size, then you might have a snapshot in place and do not continue with these instructions.)

    ===

    1. If the merger is open, close it.

    2. in a Terminal (/ Applications/Utilities/Terminal) copy and paste command, as the following and then press Enter and it will delete the partition Boot Camp Virtual Machine of the metadata and the Virtual Machine to help.

    Note: This does not affect the Boot Camp partition install windows in that it does not remove it.  Also be sure you copy all the command line below, as well as, "RM" at the beginning of the ' (quote) after the s in the Machines. "

    RM - dfr "/Users/$ the specified item was not found./Library/Application Support/VMware Fusion/Virtual Machines.

    3. start Fusion (/ Applications/VMware Fusion) and select the Boot Camp partition on the window library of Virtual Machine, and then ctrl-click it and select Delete.

  • Lack of the boot camp partition

    I use El Capitan OSX and I decided to install boot camp. I began installing Windows 7 and it has 100 GB. After installation in the Boot Camp Assistant the Macbook restarted and then appeared the installer of Windows 7. I started to install but then appeared the first problem - he says it takes 200 MB to install, but I had only 170 MB of space free (?) and is clearly not true, I always 70 GB left in the Mac OSX and 100 GB in the Windows side. So it will not let me install Windows...
    The second problem is that it is not a boot camp partition, but it took 100 GB of memory of my Macbook. I tried to uninstall everything through the Assistant Boot Camp, but the only thing it allows me to do is to install a new windows and new partition...

    Please help ASAP!

    1. in what year is your MBP?

    2. If you tried an EFI (depending on your Mac) installation, this reference (200 MB/170 MB) is generally the EFI partition.

    3. your OS X CoreStorage volume has been reduced to 100 GB, but the creation of the corresponding partition of the BC failed.

    OS X Terminal, please after the release of

    diskutil list

    Cs diskutil list

  • Can I use an ORDINARY from Mac account to load a Boot Camp Partition?

    I read the following Article on loading a Boot Camp Partition to use as a Virtual Machine in VMWare Fusion:

    http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1014618

    I understand that I need administrator privileges to load a Boot Camp Partition in VMWare Fusion.

    But can I use a REGULAR account (Non Admin), raise my admin privileges by entering a username Admin and the password and then load my Boot Camp Partition in VMWare Fusion?

    The Article seems to imply no. because it refers only to enter an Admin password.  There is no mention to enter an Admin username.

    Can someone confirm please if I can use an ORDINARY Mac account and load a Boot Camp partition in VMWare Fusion after entering a username Admin and the password.

    Or am I have to use MAC Admin account in the first place?

    When a non-administrator user accesses an Admin-level feature in OS x, the user is presented with a combination of user name and password to authenticate.

    Then, indeed, as long as you can type the user and passes an admin user, you should be able to use BootCamp with Fusion.

  • PGP Whole Disk Encryption and Boot Camp Partition

    I use the PGP 10.0 Beta for the last two weeks (it is now been shipped and is the current version), and one of the new features is Whole Disk Encryption on Boot Camp partitions. It works fine - except for the fact that VMWare Fusion 3.0.1 can not load the Boot Camp partition is encrypted (it starts initially, but does not advance beyond what I suppose is the PGP bootloader).

    I know that I can create a virtual machine and run Windows to work around the problem - I'm just curious to know if this is something that VMWare are willing to study and operate now PGP 10.0 has been shipped.

    It seems to be fixed/supported in a future version?

    Thank you very much .

    This looked interesting so I tried myself. I downloaded a demo of PGP 10.0 and encrypted to my hard drive which has OS X 10.5.8 and a Windows 7 Boot Camp partition.

    After starting the machine virtual Boot Camp in Fusion, I see a black screen that says bootguard _

    I guess that's also what you see?

    You're right - it's the PGP bootloader which replaced the Windows loader in the MBR of the physical disk. Fusion accesses the data in the partition through Mac OS X, which already has access to the decrypted data. The boot loader assumes that the drive is always encrypted and fails when he tries to decrypt again.

    Fortunately, Boot Camp VMs include a copy of the MBR (with the boot code and the partition table) in a separate file, so it's very easy to fix:

    #. Start the machine virtual of Boot Camp (not native!) with a Windows CD/DVD installation (or ISO image).

    #. Go to the repair command prompt.

    #. Run the fixmbr command in Windows XP or bootrec /fixmbr in Windows Vista or Windows 7 to replace the MBR code.

    In this way, your Boot Camp virtual machine will use the default Windows boot loader to access the already decrypted data, while the native Boot Camp startup will use code PGP MBR (which is always the physical disk) to access the prompt for the PGP password and decrypt the drive.

  • Can I install the same Windows 7 as a Boot Camp partition AND a VM regular partion?

    I've been running Windows 7 regular valuation as a VM partion.  Now that it is officially released, I bought a copy and I upgraded my Vista to Windows 7 partition and then I start under Boot Camp or Fusion 3 lets start the boot camp partition.  Starting time on a partition Boot Camp is a bit longer than on a normal partition of VM, so I find myself most of the time with the assessment of partition of the VM, but in June, it will go away.  Could I take the installation disk that I used for the Boot Camp and install it also as a regular virtual machine, or which will cause insurmountable problems for activation?  I hate to have to buy another copy of Windows 7 just to get a faster speed when I don't want to use the complete as machine when I boot Boot Camp.  Sometimes, I have to give Windows the power of the machine, so don't want to only install as a virtual machine.

    gebanks wrote:

    Well, I wouldn't mind a call to Microsoft if they'd let me activate both, but don't want to waste our time if they would certainly not.  Anyone try this?

    Ask yourself if someone illegally active copy of Windows?  This would be a pretty Brave soul to admit illegal activities.  :-\

    You only have one license for Windows if you are only allowed to have a single installation to be activated at any time.  Activate a second time to remove any other installation that uses the same license (aka product key), by the Windows EULA.  Another thing is the violation of the EULA.

    The 'Microsoft police' will come knocking at your door?  Who knows.  Microsoft has billions of dollars and could very well decide to use some of those dollars to make an example of a person, like how the RIAA did to people he considers pirates.    It of ultimately your decision whether to violate the EULA or not.

  • Where did the Boot Camp partition goes after VMware?

    Hi all

    When I was with Boot Camp the last time, there was this partition called "Untitled" on my desktop Mac, which is the partition for Windows XP.

    After using VMware Fusion for the Boot Camp partition, the "Untitled" icon disappeared from my office.

    Can I know what happened to that partition?

    Thanks in advance for any help.

    A single operating system can control one partition at a time.  If the Boot Camp partition is disassembly of OSX and mounted in the VM when you start the virtual machine.  When you shut down the virtual machine, the Boot Camp partition should be resumed to OSX.

  • Boot Camp partition appears twice in the library Virtual Machine

    I am running Fusion on an iMac (10.5.6). Once I upgraded to Fusion 2.0.2 from 2.0.1 library Virtual Machine app started listing the Boot Camp partition twice. If I had my choice that would get rid of two of them. I will not start in the merger's Boot Camp partition. If it had gone I would not accidentally choose him more. Anyway anyone know how I can remove at least one partition Boot Camp Virtual Machine library app list entries?

    Thank you

    Mike

    Take a look at: duplicate entries on the Virtual Machine Library dialog box

Maybe you are looking for