Liquid USB Express driver file has a setup.exe file!

Similar Questions

• USB Flash Drive files

  If I create usb flash drive files using Windows 7, can I access files in the files using another

  Windows (xp, vista, 8)?  I use the flash drive on different systems.  Thank you, Ben.

  
  

  Shouldn't be a problem at all.
   

• Satellite L675 - 11 H - cannot access and/or played on USB flash drive files

  Hi all

  I recently bought a Toshiba Satellite L675 - 11H and tried to transfer files from a USB Pendrive on my hard drive from Toshiba. The files were already transferred from my old laptop (HP - XP) on my USB flash drive.

  Unable to access the USB flash drive to any of the USB ports that I connect my new laptop flash drive. What could be the problem here? Thank you for your help or tips!

  Hey Rush,

  Can you post more detailes about this behavior? What happens if you connect your laptop HARD drive, you don't see that Windows installs the drivers for the new USB device or do you have an error message? If you have connected the USB check of Windows disk management if she s recognized there (Control Panel > system and security > administrative tools).

  Have you tried other USB devices such as USB mice? If they don t work too the problem might be connected to the USB ports. In this case, you must delete all the USB ports on the Device Manager and restart your laptop. Also the chipset driver update might help.

• How to copy music to a usb flash drive files

  Copy music files help

  I want to copy windows media on a cruzer music files.  I can't understand how do.  Can anyone help?

  It dosnt' work this way.  I tried.

  ==========================
  What happens when try you it?

  Watch the video at the following link:

  # 1... Adding files to your flash drive... click laft "Vista".

  How-to videos for SanDisk USB flash drives ted/1
  http://KB.SanDisk.com/app/answers/detail/A_ID/3170/Rela

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How boot Windows Vista from a USB hard drive that has a good backup Vista already on him.

  Hi, initially, I thought I had a virus (blue screens that appear often), then I thought I had a corrupted driver or systems file. So, I had a 2 t USB external hard drive and saved ALL my internal hard drive.  After execution of all kinds of tests from my internal hard drive, it does NOT pass the diagnostic test and always stops in the same place on the internal hard drive.  It becomes harder and harder to start on my internal drive of 'C' without getting some kind of blue screen.  I'm sure that now it's my drive "C" which is declining and malfunction and I am convinced now to go forward and every time you start my existing backup Vista SP2 that I backed up on my disk 'K', or if I can, then do a new clean install of Vista 86 x (32 bit) on the disc 'K '.  My boot sequence is as follows: 1. Disc 2 DVD 3. External drive USB 'K' 4. Internal drive C (eventually when I get all fixed, I turn OFF my 'C' drive.)  When I boot my computer without my Vista disk, it bypasses the 'K' reader, because all the "loadup data" is located in a folder and are not exposed, or I don't have the files to "load" just in the right place.  When I look at the file config.sys and autoexec.bat copied, I see nothing in the files that would be "load" my existing Vista, instead he just goes right in front of the reader 'K' and on the 'C' drive and loaded a version own intalled my Vista (if I can avoid a blue screen, sometimes I have to load in "safe mode" and even) It doesn't work sometimes!)  My question is what the loadup files are needed and where on my 'K' drive (in system32?) to be able to restart my old copy of Vista which has all my existing configurations in place?  Thanks in advance for your help.

  Hello Mrbigbry,

  I found this thread which seems to discuss what you ask also:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-files/can-i-run-Windows-Vista-off-an-external-hard-drive/16c27e12-5ae1-4320-9533-613881633831
  There are some links in the response marked as an answer that may also be useful.

• TV 39L4353D - 5.1 to pllaying question stereo USB flash drive files

  Hello

  have recently purchased the above model, and will have questions game 5.1 Blueray audio files from my USB drive on the TV...

  Basically, I can change the audio channels via the remote control, but the only channel I can operate is a horrible English dub!

  The correct language is selectable, but does not play at all... any ideas?

  Thank you

  Hello

  In my opinion, you should check first if the same question would appear from different sources.
  I mean, you should check 5.1 movies playing appearance of DVD and BD discs that support 5.1

  In addition, you should check the manual for the video/audio codec and file format supported by using the USB interface.
  To my knowledge, not all formats are supported!

• My main computer crashed and the data has been retrieved from the hard drive, including all of my Outlook Express dbx files

  I'll provide too much information because those of us who are computer knuckleheads think that everything is important since it is a mystery to us.

  My main computer crashed and the data has been retrieved from the hard drive, including all of my Outlook Express dbx files. There are four years of e-mails in these files and critical that I be able to open them.

  My only working computer running XP. It has Outlook Express is installed on it and was once used for e-mail, but not more and not implemented with my ISP to send or receive if it matters at all. Other that the sending and receiving of all the other functions of the OE program appear to be operational.

  I have read many explanations on how to open the files dbx on different sites - all is completely different and most seem well beyond my skill level.

  There is a fairly painless way to open these files? I don't want to try anything that could damage them. Please... any solution please guide me through in its simplest form - I am 64 but pretend you are explaining the process to a 7 year old. Yes, I'm that lame!

  Sorry for writing a novel and thank you to all who take their time to help the ignorant!

  I advise you to immediately copies of your DBX files restored. Save the duplicates in a place safe, and don't mess with them.
  Then try using one of the various tutorials that you have found on the Internet by using a copy of your DBX files restored.
  I did it a few times, but years ago and I DBX http://www.techrepublic.com/forums/questions/how-i-open-corrupted-dbx-files-in-oe/ visualization tool
  You just continue to make attempts, using a tutorial after another.
  As long as you have these unchanged copies of backup of your DBX files, you should survive it - other than frustration. Email PC remains a mess.

• How you can transfer a file of music like iTunes or Spotify on a usb flash drive?

  I would like to listen to my music from Spotify and Itune on my Samsung HDTV system which has an application for a USB key, but I can't download the file to my USB Flash drive. What should I do?

  I would like to listen to my music from Spotify and Itune on my Samsung HDTV system which has an application for a USB key, but I can't download the file to my USB Flash drive. What should I do?

  Make a read here: -.

  https://discussions.Apple.com/thread/3631435?start=0&TSTART=0

• How can I recover the files from my USB Flash drive before it will be deleted?

  My USB Flash drive has files on it from another computer and only the files that have been stored on the flash drive which cannot be recreated. How can I recover the files? The Flash Player is telling me that it must be reformatted and the files will be deleted. It's two computers I use. Help, please

  Hello

  Looks like it might be a problem with the flash player.

  Step 1: Try to use the USB stick on another computer or a different USB port.

• Important files are not available on a USB flash drive

  I copied the 8 GB of files on a USB flash drive and checked that the files were indeed on the flash drive before you delete them from my hard drive.  When later, I tried to access these files, no files were listed and properties indicated that all 8GB has been used.  Formatting the flash drive is not an option.  I need those files!

  Hello

  try this program to find your missing files: RECUVA

  You can use it to find the 'deleted' on your hard drive, files that are not deleted. They stay there until they are crushed.

  Flash Player for them as well equipped and this program

  http://www.Piriform.com/Recuva

• Cannot open the com files and executable file in the Original Windows Vista Software activated after updates to the registry and cleaning, error message and all the setup.exe files has been disabled, why?

  I use Vista Ultimate SP2 preloaded o/s and windows is activated with a genuine problems with executable files with product of what ID 89580-OEM-7332132-00031 on PC, the problem happens when I'm uninstalling some registry tools, the error message I got was 'impossible to connect to the microsoft client group policy server' and whenever I try to run the executable file .exe or .com I get error messages "the windows don't. not find the environment option that was entered path c:\windows\system32\msconfig.exe for example. What is your solution if all the drivers I downloaded from microsoft Update site and support Web is unexecutable because of registry files missing that causes all the executable files and com files to display error messages when clicked. What was missing in the original windows registry files after running the tool registry optimizer? What was missing in my windows vista original? Need help 4th level or windows file recovery software onwer.

  I was able to surf the internet, able to do facebooking, capable of voip webcam and chat however installation and admin work on operating system software has been disabled due to lack of the registry files all the executable files was disabled after a registry cleaning registry optimizer and all the setup.exe has been disabled when I run saying them I don't have permission to run setup.exe because I like not connected to the microsoft Group Policy Server, but it is an original windows software, I can download files from the microsoft Web site and save on my drive hard but cannot run the executable installation files, which was lacking in system files that stopped all the executable files to run, except the internet broadband. Need help 4th level or windows file recovery software onwer

  Hello

  Method 1:

  I suggest you to do a scan of the SFC. File system (CFS) Auditor verifies that all Windows 7 system files are where they should be as they are by default and not corrupted, changed or damaged.

  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

  b. click on continue or provide administrator credentials if prompted.

  c. in the type in the following command prompt window and press ENTER:

  d. sfc/scannow

  e. you should see the following message on the screen:

  § Begin the analysis of the system. This process will take time.

  § Beginning verification phase of system scan.

  f. % verification complete.

  g. once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

  For more information, see the article mentioned below.

  http://support.Microsoft.com/kb/929833

  Method 2:

  Create a new account user has administrator rights and check if you are able to install applications or not. Follow the steps mentioned in the article below.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Method 3:

  I suggest you do a system restore and check. See the article mentioned below

  System Restore: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• All deleted files from the USB Flash drive!

  I have windows XP Professional on my computer and these days I have a problem with my USB flash drive (CCPC USB flash disk USB Device. I have a very important document that is stored in it and when I plug it into my computer it shows no content of the flash player automatically (as it was).

  When I click on the peripheral E: removable where is the flash drive, I get the message that the disc is not fomratted, would you like to see it format it now? I say no, and nothing happens. When I say yes, he says he must delete all files in the USB drive, but I don't want them should be deleted. What has caused this and what can do to save my documents are deleted?

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Driver files that run the parallel port and USB port

  In the system information utility where to look to find the parallel port and the port driver USB, name of file that manages these?

  Know the drivers specific, is only half the story.  Why you looking for these drivers?  You have problems with your parallel port or USB port?  This can be caused by problems with drivers or it could be a hardware problem (hard to diagnose a hardware problem without good parts to swap and test).  If you need to update the drivers, you must use device (not msinfo32) Manager - or maybe clicking on an executable file that loads the drivers automatically (depends on how it is sent by download).

  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need drivers (I assume that you want to the parallel port and USB ports), get the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.  Or run the Setup program of driver provided by the vendor of the computer or the manufacturer of the device.  Be VERY careful get Vista compatible drivers for these devices are difficult to identify (they usually come with the numbers of model or something like that if they can have serial numbers) and using the wrong drivers could make the problem (whatever that is) worse.

  If you update the drivers succerssfully and the problem persists, then it is probably a hardware problem.  In this case, contact the manufacturer of your computer for technical support (hopeully it is still under warranty) or bring it to a professional computer repairman (NOT Geek Squad or one of those big store centers because they don't really know what they're doing and charge a lot for this level of expertise) to have the components tested and possibly replaced.

  I hlpe that aid.

  Good luck! Lorien - MCSA/MCSE/network + / A +.

• Windows 7 USB Flash drive - if I click on Scan and difficulty after you insert the disk, it erases my files

  Original title: Windows 7 USB/Flash drive problems

  In Windows 7, if I plug in my USB drive, the message box appears titled ' do you want to scan and difficulty of removable disk (e :))?»  If I click on Scan and Fix, he deletes my files (or so I thought).  I hope that the files are still there and I have simply can't see because the drive is FAT32 and not NTFS (it says that most of the drive is NOT of free space, so I assume that the files are still there).  What should I do to see / access files?

  Note: A reader, I never selected "Scan and repair"... so I can still see/access files.
  On the other drive, however, the first time I plugged it on Windows 7, I clicked Scan and Fix and it erased all the files on this drive (I guess).  This of course got me very angry.

  Hi MichaelGramm,

  It seems that the file format has been corrupted. You might consider formatting the drive in NTFS file system and check if this solves the problem. For Windows 7, the best choice for hard disks is NTFS.

  Note: Make sure that you back up the data before formatting the disk.

  See these articles for more information on formatting disks and flash player:

  Create and format a hard disk partition

  http://Windows.Microsoft.com/en-us/Windows7/create-and-format-a-hard-disk-partition

   

  Formatting disks and drives: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/formatting-disks-and-drives-frequently-asked-questions

   

  Caution:

  Formatting erases all existing files on a flash drive. If you format a flash disk that has files on it, the files will be deleted.

  Hope this information helps.

• Why does movement of files on a USB flash drive last so long?

  I don't know if this is a Windows problem, but when I move a lot of files/folders (no copy, but select, then drag, or cut and paste) a place on the USB to another place on the flash drive, it takes much longer than the same hard disk.

  What is a Windows problem or a problem of flash player?

  If Windows is somehow move the files into pieces on the hard drive, then moving them back to the flash drive, I could see that as being the reason, but this seems very inefficient. If Windows says just the flash drive to move files and it does itself, I wonder if it is an inefficiency in the flash drive (or formatting) or just the nature of how flash drives move some files.

  I don't know that you have understood my problem. I moved the files to the flash drive from one folder to another on the flash drive. When I move tons of files in a folder on the Windows Installer by car, no matter where the records are or the number of files/folders are moved, it usually happens instantly and occasionally perhaps takes a fraction of a second or two; I know it's simply by changing the index (do not physically move the files). With a USB flash drive, it takes seconds to minutes, depending on how much is moved, which is usually much less to install on the windows drive. It's because flash player must physically move the files on the disk, there is no index to put it as on a fixed drive.  In addition the only way to move is to copy in memory, and then write it to the new location.  This means that each overflow bit must go through the USB connection (which is thousands of times slower than SATA cable on the real hard disk), and since then he has to go twice (in and out), it is even half as slow as new.

  There is no transfer between the hard drive and the flash player I know.

  What this means for me, it is the index or take more time to rewrite, or files are actually moved. What I'm asking is if Windows is somehow data transfer (even if it's the index) drive flash disk, then moving them backwards, slowing things down. I think that even moving them by RAM would slow it down, but I'm not sure.  Also considers that the internal drive is cached. So even if a bit should be moved, Windows will just notice "Yes move this bit later."  The progress box says it completed instantly, but really uses lazy writeback just finish the job later.  That is why if you lose power to your computer, it corrupts the files got reported as fact, but were not actually written on the disc.  Flash drives do not use the lazy "write behind caching" because they never know when the user will disconnect unexpectedly, so that they take the slow lane and check writing all ended before they say the progress bar to advanced. 

  You can change this second element by setting your USB device to "best performance" in the device, as Manager below.  But I do not recommend because it cannot handle unplug you the reader more.