List of cursor only save last position in loop for
Hi, I'm new to LabView 2010 and try the list of cursor to use in a different program to the top of the label. My test program has a problem however, only displays the last Summit of cursor not all. Basically my program will simulate periodic signal jacquard Sinc, finding peaks and their location of Summit with PEAK detect and then use a loop (the length of the array of locations of long peak) for update cursor list repeatedly. I can't understand why on my graph, only the last point gets poster well! Any suggestions? Attached is my diagram of block VI
You have some very weird code constructs, suggesting that you are not yet fully understand dataflow.
The property node double where you first write, then read the list of cursor is half-useless. Remove the lower property. You could just branch wire on the node property and the indicator.
The property on the left node is outside the loop, which means that it is read only once and then never again. All that you read at each iteration is the outdated value stored in the tunnel. If you need the updated list cursor, place the node property inside the loop.
Your code is much too complicated. All you probably need is to index automatic on two tables of orange and the list of cursor, built the new list of cursor on a tunnel to exit of autoindexing, then write on the property node.
Please join the real VI so I we can show you more easily.
Tags: NI Software
Similar Questions
-
Cursor Oracle return only the last record
I am a newbie in oracle stored proc. I tried to select data using the slider, but it only return last record. The recording must be greater than 1.
CREATE or REPLACE procedure MySchema.Test (myrefcur on sys_refcursor)
Is
Begin
declare
Cursor C1 IS
Select mySerialNum from TableA;
MyRecord C1% rowtype;
Begin
Open C1;
Loop
Fetch C1 into myrecord;
When the output C1% NotFound;
Open for Myrefcur
Select SerialNumB from TableB where SerialNumB = myrecord.mySerialNum;
End loop;
Close C1;
End;
end;
However, it only returns the last record in the list.
Original case *.
The original code is as below:
1st, I'll need to select a list of ImageSerialNum of ImageSerial
* 1 query:
Select A.ImageSerialNum from ImageSerial A, ProductionOrder B, Bom C
Where A.ProductionOrderID = B.ProductionOrderID And B.Assembly_Num = C.Model_Num and
B.Revision = C.Revision And B.EngRevision = C.EngRevision and
C.Bom_ID = passInVariable* and C.FactoryID = "7"
2nd, I'll need to check the process of EACH series with the code below:
* Low code a return process for 1 series only.
Select t.processid, t.processname, t.assembly_num, t.revision, t.engrevision of
(Select p.ProcessID, p.ProcessName, in. Assembly_Num, in. review, in. EngRevision, im.imageserialnum
Process p, Routesequence rs, Imageserial im, ProductionOrder in.
Where im. ImageserialNum = SerialNum* and p.ProcessID = rs. ProcessID
And rs. RouteID = in. RouteID and rs. SequenceID = im. NextRouteSequence
And in. ProductionOrderID = im. ProductionOrderID AND IM. STATUS OF '0'
UNION
SELECT A.REWORKROUTEID AS PROCESSID PROCESSNAME AS B.ROUTENAME, C.ASSEMBLY_NUM, C.REVISION, C.ENGREVISION, a.imageserialnum
OF IMAGESERIAL A, B OF ROAD, PRODUCTIONORDER C
WHERE A.REWORKROUTEID = B.ROUTEID AND A.IMAGESERIALNUM = SerialNum*.
AND A.PRODUCTIONORDERID = C.PRODUCTIONORDERID and a.status = '0') t
After that, I would like to combine the two in 1 stored proc code.in this case, you just want to join the two applications to use in the FROM clause
As I don't have your tables, I created two tables, each representing the results of your queries. Substitute the names of table with your queriesSQL> drop table master 2 / Table dropped. SQL> drop table details 2 / Table dropped. SQL> SQL> create table master 2 (ImageSerialNum varchar2(25)); Table created. SQL> SQL> SQL> insert into master values ('Serial1'); 1 row created. SQL> insert into master values ('Serial2'); 1 row created. SQL> insert into master values ('Serial3'); 1 row created. SQL> insert into master values ('Serial4'); 1 row created. SQL> insert into master values ('Serial5'); 1 row created. SQL> SQL> create table details 2 (ImageSerialNum varchar2(25) 3 ,ProcessID number 4 ,ProcessName varchar2(25) 5 ); Table created. SQL> SQL> insert into details values ('Serial1', 1, 'Process1'); 1 row created. SQL> insert into details values ('Serial3', 3, 'Process3'); 1 row created. SQL> insert into details values ('Serial5', 5, 'Process5'); 1 row created. SQL> SQL> select m.imageserialnum 2 , d.processid 3 , d.processname 4 from master m 5 left outer 6 join details d 7 on (m.imageSerialnum = d.imageserialnum) 8 order by m.imageserialnum 9 / IMAGESERIALNUM PROCESSID PROCESSNAME ------------------------- ---------- ------------------------- Serial1 1 Process1 Serial2 Serial3 3 Process3 Serial4 Serial5 5 Process5
your query will be something like
select m.imageserialnum , d.processid , d.processname from (
) m left outer join ( -
"Save history" set to 30 days but can only view last 7 days of history - how can I view the longer history of 7 days?
According to your troubleshooting info, you have 2 set preferences to update the:
Browser.history_expire_days
7Browser.history_expire_days. Mirror
7In the address bar, type Subject: config and press ENTER. The subject: config "This might void your warranty!" warning page may appear. Click on that I'll be careful, I promise! to continue on the subject: config page.
Search for the preference browser.history_expire_days. Right-click on it and select reset. Do the same for other preferences. -
Hello world. I get the concept of the takes, but I can't work out how to save the position of the head of characters and then in another concentrated on the position of the students, then to another socket just eyebrows and so on. If I try to do now he simply wrote on the previous setting. Different things have a record arm but changing just the value of the resistance. So is it possible to do or position the head, eyebrows, mouth students must be registered at the same time? Thank you
Here's a way to try (worked for me)
In the Panel of puppets Ch, add behavior of face for each eye and each eyebrow. In the scene, activate the record on only the face, then make a recording. Then the face, activate and deactivate the eyes (or one eye) and record. Then activate only the other eye, or eyebrows, etc.
-
How to save a position and dimensions of windows on the desktop?
How to save a position and dimensions of windows on the desktop?
In Vista, there are limited means of control Windows and many of those who apply to the general patterns and not to individual windows.
The following includes about what Vista can offer in this area, and I don't think that this will do exactly what you want (even if it is possible that the first option with references to other related articles can do a little of that, but I don't think that he can do everything or entirely as you wish without 3rd party help) except for the 3rd party program that winsizeme also mentioned below. That may do the trick:
Here's how to change the default template for a folder:http://www.vistax64.com/tutorials/70819-windows-explorer-folder-view-settings.html. Default behavior is to select the model based on the first type of file placed in the folder (you must choose something). Vista sets thefolder type template according to what are the types of files in the window and the settings display window Explorer. This will show you how to resetthe Windows Explorer folder view settings, disable Automatic folder Type discovery and increase theview of the folder cache to have Vista don't forget display settings, model of file type, size, or position of a specific window for when it was still closed to the location of specific path.
It does not work with the Sub record under, Open with,open in a new tab (Internet Explorer), etc... dialog windows of type through the goodFile menu bar item. These don't seem to be able to have their size or their position to recall. For the latter, you can use the free program WinSizeMehttp://www.pcmag.com/article2/0, 2817,2339650,00.asp to resize them and record the sizes and locations (I changed the program that mentioned in the article, because even if it is a Vista article, the 3rd referenced application part it does not indicate speciiquement is compatible with Vista so that it doesn't). I have never personally used this program myself so I can't say for some it will achieve your goals, but from what I've read on this subject, it should do the trick (although I don't think it will be automatic - you may need to set each window you want to save in this way - but that's about all that's available if you need to decide whether or not this alternative is better or) (no). I'm not certain if it applies to programs or only records - but since it's free you can test and see if it helps you with your situation (it may be that it is useful in some cases and not the worth or effective in others - it of for you to decide (but considers that there is really no other alternative that those presented here - just Vista is not this type of detailed features except to a lesser extent) as described in section 1 above).
Here is another article on how to modify the columns in Windows Explorer and sort in Vista:http://www.vistax64.com/tutorials/108665-column-customize.html. This will show you how Add, Remove, move, change the widthand change the sort order of the columns in Windows Explorer in the way that you want.
Here is another article on how to change the display of the default folders in Vista (but she claims it is not a perfect solution and can revert to the previous behavior is not as good as the prior links provided:http://news.cnet.com/8301-13880_3-10019957-68.html.) I include it only because it is an option - but also what he says it is not a very good alternative (but if none of the other works, it may be worth).
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
CC guard add "Creative Cloud Files" shortcut to sidebar, last position
CC2015 added 'Creative Cloud Files' in the side bar of the Finder of OS x as the last element in the sidebar.
This isn't a bad one time thing.
But if it is moved to a different place in the list (for example, where we used to have with our other cloud services) or if it is removed from the sidebar, agent CC is going to replace it in the last position.
It does not meet our strategy of software deployment instructions.
How can we disable it?
Thank you very much
Ross
Hi Ross and all the others who have posted on this thread!
First of all we are sorry that you have experienced pain and when you feel pain believe that pain too.
Thank you very much for your comments its really important to us that we get this information from a variety of sources as this helps determine us how important this issue is.
We set that I write this response and this correction will turn off in the very next version, so bear with us!
Best wishes,
Ashley
-
Bridge not remembering last Position for the side panels?
The side panels in Bridge CS6 will not remain at the last position value when I close? I thought that it was a case of bridge don't close don't properly during the shut down Windows (7). I then tried to fix the side panels to where I only they and returned file > exit to close the bridge correctly and when I run it still lacks the right position. Doesn't he remember this and how can I change this?
Here is a screenshot of what I call the side panels: http://screencast.com/t/QDZGNCPp (The Red arrows are pointing side panels).
If you must start that Bridge to the launch has allowed closing the procedure should work.
Have you tried to set your panels where you want and then registering this as a workspace?
-
My back upwards only made last month on photos? How can I get my entire photo library saved? I have a lot of storage iCloud.
Re synchronize you photos with iCloud? If so, these pictures are not saved.
-
Type a question and a suggestion. I accidentally closed my session with a load of tabs open. I have then accidentally opened firefox twice, once with my old session and a new session which was just my homepage. I intend to close the latter accidentally closed the first, and now I can't restore all tabs I had open like firefox will remember only the last session I had opened, i.e. the one with just my homepage. Is it possible to set up a 'the session history' feature, so that everything as I can come back and open a tab from yesterday or last week, I can open a session yesterday or last week?
Thank you
Steve
You can watch this extension:
- Session manager: https://addons.mozilla.org/firefox/addon/session-manager/
-
How to set up the multimedia keys (only the last 3 buttons)
Hello
How to set up the multimedia keys (only the last 3 buttons)? The first button works, you open the browser and the other open WMP.
But the last 3 buttons (play/pause, Stop, forw/rewd) aren´t work with WMP. How can I fix?Thank you
Hello
Can you please tell us what model of laptop Satellite A do you have?
-
Hello
I have an example vi that has a graphics property of waveform node that has the property "old list of cursor. I tried to use it with a graph in the code that I write, but I can't find anywhere in the select property. The closest I can find is "slider specifications. Is it the same?
Thank you
Use the property "Cursor List". It is a superset of the "old cursor list."
-
a table of images only the last image shows the index
Hello world
I try to index a table of images and all, but the last item gives me the error: "not an image."
Here is a picture of the vi. The first loop load images and stores them in an indexed auto tunnel. Each diagnosis that I fell on this loop showed that all is well. The second loop must display the image stored in the tunnel sequence indexed auto, but it does not work. Instead, I got the error message that the 0 to n - 1 elements are not images, and only the last image is displayed.
What I am doing wrong?
Thanks for your help.
and vi:
Hello
This VI has worked well for me with a contribution of 5 bmp files. You can check your input files?
-
I can see only the last fax received in my PC and not all of them using an Officejet Pro 8600 Plus
I create a file in my office where received faxes can be saved. Indeed, I can see the fax received, but if I get one more, it replaces the previous one. So, I see only the last received fax. How do I see all of them and does not replace another?
The problem was that I didn't set the time on the machine of the printer. I just put the date and time and the problem solved. I get faxes pdf correctly. Be it, thanks for the help!
-
Save the position of icons on the desktop and restore if necessary in windows 7
How can I save the position of icons on the desktop and restore if necessary under windows 7 ultimate x 86
You can save custom desktop icon position and restore it if necessary, using the Layout.dll of Microsoft shell extension. REF:Save and restore available to the icon on the desktop in Windows NT/2000/XP/Vista/7. Or try DesktopOK Freeware - save and restore the desktop icons.
Ramesh Srinivasan . The Winhelponline Blog
Microsoft MVP, Windows desktop experience -
If I opened a word from an email document and made some success publishing and only save... where is it?
I guess that and still say in your email.
You can download the doc and then edit / add content.
Then use Save as and rename it to reflect the change / date of the change.
Then attach the new doc to a new e-mail message.
Maybe you are looking for
-
Bad monitor or LCD screen cable on Qosmio X 505?
Looking for a little help to solve my problem. About six months ago my web cam log if I moved the monitor back or front. A month or two later the monitor should fade a bit. I have to move the monitor to restore its brightness. The monitor will now co
-
Satellite A100-784 - I lost the recovery disk
Satellite A100-784, I had, but I lost the recovery disk and I want to restore the PC What should I do? Pleas help me
-
Send the data collected by sensors in cell phone android to Labview installed on a PC
Hello My question is if someone knows a way to connect the mobile phone and the PC to share the values of the sensors of a telephone cell phone android (barometer, termomether, gyro, etc.). Can you the app DATA dashboard or any other application avai
-
BlackBerry Z10 Z10 Blackberry Blackberry Pearl Flip 8220 switch device
Can someone tell me if this is possible, I need to make a switch of the device to a Z10 to a BB 8220... blackberry link will come looking for BB 8220 or not - the Office of bb does not pick up the Z10 and I fear that I will lose all my information on
-
Take a screenshot of BlackBerry 10 terminal
Is there a demand a place to take a screenshot of the current view of my camera?