list of ID missing attributes multi-function


Hello

I have not seen this problem before.  What version of LabWindows/CVI do you use?  What version of the NO-Scope driver you have installed?  In the same directory as the niScope.fp file is located, it is also a file named niScope.sub.  This file must be present in order to fill the attributes - is this file present in the directory?  Correct this problem may require a reinstall of the pilot and the support of the CVI if there is in fact a corruption of one of the files.

Kind regards
Andrew W
National Instruments

Tags: NI Software

Similar Questions

  • MULTI-FUNCTION RUNTIME error

    Hi, experts,

    I am trying to run "RUN the FUNCTION PANEL" on CVI. During the construction of pilot, I checked the multi-function of this command, but it failed with the error message, Interactive runtime error - Unresolved symbol: _Math_Average.

    I do the material to the CVI basic text, and it is a very simple function. And in addition, it ran correctly when I finished the pilot, so I think that programming should be correct.

    So I fight with all editing parameters, but I couldn't find the solution.

    Does anyone have any solution or tip?

    Thank you

    Hello TetsuyaU!

    "' The most obvious solution to this problem would be to activate the Interactive execution environment window options found in Options ' environment ' Interactive window. These options indicate if the project or loaded instrument drivers files are used by the Interactive execution window. Otherwise, if the corresponding option is not enabled, the Interactive execution window fails to connect with your instrument driver symbol and you get an error of unresolved symbol.

    It works for you?

    Best regards!

    -Johannes

  • What CRM SKU multi-functionality rental CRM 4.0 support

    CRM 4.0 enterprise edition is already installed in my DEV environment but I'm not able to create several m organization.

    I wanted to know CRM SKU support multi-functionality rental of CRM 4.0.

    [Moved from the community centre of Participation]

    Microsoft Dynamics is supported on MSDN. Check the CRM forums to:

    http://social.msdn.Microsoft.com/forums/en-us/home?category=Dynamics

    Don

  • entry continued and finished output in 'Multi function AO AI sync.vi ".

    Hi all

    Can I acquire data streaming and output finite number of data with "Multi function AI AO sync.vi '?

    Thanks for your help!

    Hello

    I think that this should be possible.

    Just change the mode to sample your way of samles genearting to "samles finish" and add a constant or a control with the number of samples you want to generate...

    Kind regards

    adigator

  • Cannot generate the multi-function in Vista

    We ship an ActiveX control for use by our customers. In our sample code, we created a multi-function for them.

    A customer reported that it cannot create a new function by using the Vista Panel - but he can create one using Windows XP.

    Is there a known issue with the creation of panels to function under Vista?

    Concerning

    John Barton

    Hi John,.

    One thing you need to check on these machines that fail is the File Format of the FP.  This opens a file of .fp to the CVI, then going to the Options menu and then click on the FP File Format.  In this dialog box, make sure that the default new File Format is set to CVI 5.5 and later versions or CVI 8.5 and later versions. Once you put in one of these formats, you should be able to generate your panels to function again.  Please let me know if this does not work, or if you have any questions.

    NickB

    National Instruments

  • Behavior "Recall multi-function.


    Hello Bernd,

    There are a few options for you.  If you do not have one of your windows in the display by tabs, you can go to Options' environment and then uncheck the "Show workspace tabs.  Otherwise, the first time that you open a panel of function and it is shown in actual size you can go to the window menu and select "release all Windows FP".  This will remove the windows control panel function, and each new multi-function open window will remain off-station.  If you want to dock them, you can simply return to the window menu and select "confine all windows of FP.

    NickB
    National Instruments

  • How to operate the laboratory discovered multi-function synchronization with multiple devices and change the recording time?

    Hi, I'm new in Labview. I need help for:

    1 change a program multi-function in order to record the data of three cards daq (devices 1-3) and output through the map (1 unit). The current program was created to record and output signal of one of the card (1 unit). I try to choose multiple devices when I run the program, but there is an error 200558 shows "a task cannot contain multiple independent devices. Create a task for each independent device.

    2. change the duration record for a longer period, for example: 0.1 s. Currently, the recording time is s 0.009971.

    I joined the multi - funtion.lld. In this library, "des_v2_Multi-Funtion_Synch I - AO.vi" is the program that I need to change. I've also attached a file of input for runing the program signal.

    Thank you very much!

    Sincerely,

    Jie

    Hello Jshen6,

    You can have different examples of VI if you do not use the same version of LabVIEW. I am currently operating on LabVIEW 2013 SP1. Whatever it is, this article should be useful to you that he describes in detail how to synchronize multiple tasks of series M.

  • BlackBerry Smartphones Call Log problem - lists only the missed calls

    I have the curve 8900 with t-mobile and I'm having the same exact problem that this user has:

    http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=8900&message.ID=3200

    My call log lists only the missed calls (dialed or received calls). He did this for a few weeks now. I received the error message 'exception: java.lang.NullPointerException eception' a few times as well.

    I checked all available software updates and I use the most recent software.

    Please help me if you can.

    Thank you

    Mike

    I fixed it!  It took about an hour on the phone with t-mobile, but we thought about it.   For me, the problem was probably a few information corrupted in my call history.  I need to delete all the call history, and then it was fine.  To do this, you need to install the blackberry desktop manager on your computer if you have not already (be it from the cd that came with the phone or the Web site).  Open Fund Manager and connect the blackberry to the computer.  Select the backup and restore option.  Then, select the advanced option.  On the right side of the screen, there will be a list of all the features of the phone.  Scroll to phone call logs.  It lists the number of records in the phone.  All I had to do was remove all records from phone call and it was corrected.  Now my lists of newspaper calls dialed, received and missed and I no longer get the error message.  I hope it helps you too!

  • vCO WebView error - parameter value is not defined in the list of the Webview attribute

    Hello

    I tried to create a simple web view for Orchestrator (5.5.1 1617127), who will present a link to launch a single workflow. I followed the instructions in the Guide of VMware and the VCO Team Blog, but both find themselves with similar errors, which seem to have a common root: it seems that the display of web pages can not read the attributes.

    On the web page, I'll see something similar to the following:

    WebView - an exception has occurred.

    Reason: WorkflowLink component error: value of the parameter "attribute" (alias "workflow") ("createVM") is not defined in the list of the Webview attribute

    You may continue by restarting the session.

    In the server.log, I see the following: -.

    11:46:04.717 2014-10-02 + 0100 [http-bio-xxx.xxx.xxx.xxx-8281-exec-2] {} [WebviewExceptionPage] Exception Webview INFO - message:

    org.apache.hivemind.ApplicationRuntimeException: component error WorkflowLink: "attribute" parameter value (alias "workflow") ("createVM") is not defined in the list of the Webview attribute

    The createVM attribute is set in the correct web view as an attribute with a Type of Workflow and value to create simple virtual machine. I get a similar error any attribute type I try to get out of the workflow (the example of getVirtualMachineList does not create an error on the page, but is not fill the window and creates a similar message appears in the log).

    Can someone give me directions on what to watch next? I can't find anyone else with this error, which makes me think it might be something specific to this medium, but I can't work on what it could be.

    Thanks in advance,

    Ben

    I had the time this by restarting the service after each new attribute has been added, which was far from perfect, but looking around the forums, I have seen that WebViews were being obsolete, so I'll have to look at alternatives in any case.

  • Where can I find a list of complete tag attributes

    Where can I find a list of complete tag attributes. I found the tag quick reference page but it does not all modifiers that you can use with some tags. An example I used {tag_body, 200} in the ads to limit the number of characters to display. I don't know where I found this. I could find other attributes like that. Some areas are booking tags, the blog tags, the tags of the shop.

    Hello

    It's good as it seems that this attribute has been stopped article quick reference by accident.

    However, this article should list all the tag refers to less than accidentally left.  I'm going to our team of documentation updates accordingly.

    Reference tags: http://kb.worldsecuresystems.com/134/bc_1342.html

    Module reference: http://kb.worldsecuresystems.com/134/bc_1345.html

    Kind regards

    -Sidney

  • IOM audit report - missing attributes

    We run OIM 11 g R2 BP06 (under the production deployment). I work with the audit and report functions, as it is a requirement of the customer.

    According to the documentation of audit - 11 g Release 2 (11.1.2) Configuration, the UPA table contains all snapshots and changes made to the XML format. It works very well: if I update the name, phone number, never attribute, I see that change stored in the table of the UPA. The 'Audit Messages task question' will work then and dénormalisée delta of the XML in the UPA_FIELDS table, which is part of the table used by the BEEP report.

    However, it seems that some attributes are never denormalized (in UPA_FIELDS). This is for example the case for the phone number, display name. Modification of these attributes will be visible on the standard audit report.

    The question is: How do I configure IOM (I assume that the task "Question Audit Messages Task") If multiple attributes are denormalized in UPA_FIELDS and changes get visible in the reports?

    Thank you

    Didier.

    I found the answer on support (which is down this morning) in the present note:

    -The list of attributes that need to generate Audit records in the Table UPA_FIELDS (Doc ID 1401055.1)

    also, which refer to a bug, do not yet resolved and with no workaround:

    - BUG: 13626801 -all THE ATTRIBUTES do NOT COME to the TABLE of UPA_FIELDS

    In other words, it's a known :-(limitation

    The solution I see is to try to generate a report of BI Publisher UPA table directly AND XML-based. Not sure if this is possible.

    I thank me for the good support :-)

    Didier.

  • HP Notebook: Missing laptop bluetooth function

    Bluetooth for my laptop HP [15-ac178nr] function has stopped working after update Realtek RTL8723BE Bluetooth driver for MS Windows. Peripheral Bluetooth no longer appears in Device Manager. This driver doesn't appear in the list of the network as a «WiFi adapter» adapters I generally back the driver but, this option is not available in the Properties menu. Please notify.

    Hi @A2Ruff,

    Welcome to the HP support community!

    I read your post on your computer laptop 15-ac178nr HP detects only not the Bluetooth. I uninstall the driver Reattek and reboot the laptop. Update the driver for Bluetooth Device Manager.

    Hereis a linkthat shows you how to check that the Bluetooth discovery settings are turned on and file sharing is also turned on.

    Please get back to me how that happens.

    If this post helps you solve the problem, you can click the thumbs up icon to show the gratitude!

    Thank you.

  • synchronization of multi function HAVE AO

    Hi all

    I would like to synchronize the analog input and two separated outputs analog (Ao0 Ao1) to a NOR-6040.

    First of all, I used synchronization function multi HAVE AO vi of examples and added a second AO as photo 1 indicates, without synchronization and it worked fine.

    But I also want the second AO (Ao1) with the acquisition of synchronization. I tried this as photo 2 States, but it always says "error: 50103 the specified resource is reserved.

    Does anyone know how to do this?

    Thank you

    Adão Monteiro

    Hello to determine,

    Thanks for the reply. Your answer works, but I would like to have independent patches for both channels.

    I use them on different parts of my program, and if I have to write together I always know the value to put on the other channel (except that I'm really trying to put).

    If you have other ideas, please let me know.

    Thank you

    Adão

  • 'chain' missing in pannel function

    Hello

    I develop a code labview for serial communication, but when I right click in the control panel I have not found "string" in the Panel "functions".

    I work with LV 2013, this does not happen in labview 2012

    Have any body and idea why 'string' is missing.

    see you soon,

    SASA

    also check in this way:

    C:\Program Files (x 86) \National Instruments\LabVIEW 2013\menus\Categories\Programming

  • BlackBerry Smartphones MIDlet name missing attribute

    Despite the appworld deletion, then by restarting my blackberry with a battery pull whenever I try to re download appworld I get the same error message saying that the 'MIDlet name attribute is missing. " I just can't work it out and tried so many times. Can anyone help?

    I found these threads:

    Let us know if it works.

    http://supportforums.BlackBerry.com/T5/BlackBerry-Curve/helpp-the-MIDlet-name-attribute-is-missing/t...

    http://supportforums.BlackBerry.com/T5/BlackBerry-App-World-General/upgraded-to-7-1-on-bold-9900-and...

Maybe you are looking for

  • proxy

    I want a new 5535.  I'm on OS 10.9.4.  I connect to the internet through an airport.  There is no proxy address. The printer prints very well.  However, he says that he needs an update and cannot connect to the web without a proxy address.  ?????  I

  • Best practices for designing a view in PlayBook

    Hello world I'm new to BlackBerry PlayBook development and I would like to know how to make a user interface appropriate for playbook, what would be the best practice to do and it will be helpful to me if someone can post sample code here Thanks in a

  • USB mouse and wireless keyboard/touchpad cursor, lags and freezes

    Original title: cursor lag / freeze a system slow, very slow or cannot manage not to load the devices & printers, his noisy hard drive, excessive heat, mouse and keyboard lag / freeze constantly fight my wireless mouse and it's not the mouse itself.

  • Calculation of the Manager - missing tool > menu Variables in 11.1.2.4

    HelloI can't manage (all applications) in Hyperion Planning 11.1.2.4 substitution variables. The menu, I should be able to achieve in the calculation Manager underTools > Variablesis absent. How can I access and manage overall in Hyperion Planning 11

  • CC desktop will not show apps, then crashes after minutes of the spinning wheel

    I have done everything to uninstall, reinstall, again and again, after many suggestions, but can't seem to get CC Office to work properly and display applications.I ' ve used the tool own adobe just uninstall and reinstall office and nothing CC. ".An