List of the camera modes

Similar Questions

• Change the video recording in the camera mode?

  Just bought an iPad 9.7 inch Pro. I can't believe that they did not provide a way to switch between video and recording slo - mo resolutions and cadences of the camera app. I can go slipping between video and Slo - Mo and the amount of time, but I can't switch between shooting 4K and 1080 p video, or between 30 FPS and 60 fps 1080 p or slo - mo 1080 p 120 fps and 720 p 240 frames per second. In fact, I have to jump out of settings > Photos & camera to change DEFAULT record for these features of the camera modes? Please tell me I'm missing something.

  We are all of the users like you

  Please send your comments if you wish to http://www.apple.com/feedback

• How to find the list of the cameras raw files supported for 12 items

  Where you will find the list of cameras supported by photoshop elements 12 raw processing?

  Here:

  Camera Raw plugin | Supported devices

  What operating system do you use?

  PSE 12 can use up to camera raw 8.5, so if you do not have 8.5, use help > updates editor of PES 12 to get the update to camera raw 8.5.

• change the camera Flash Mode without rebooting the viewfinder,

  Hi, is it possible to change the flash of the camera mode without having to restart the viewfinder?

  Thank you!

  void CameraTest::changeFlashMode()
  {
      if(currentFlashMode==CameraFlashMode::Off)
      {
          currentFlashMode=CameraFlashMode::On;
      }
      else if (currentFlashMode==CameraFlashMode::On)
      {
          currentFlashMode=CameraFlashMode::Auto;
      }
      else if(currentFlashMode==CameraFlashMode::Auto)
      {
          currentFlashMode=CameraFlashMode::Off;
      }
  
      cameraSettings->setFlashMode(currentFlashMode);
      camera->applySettings(cameraSettings);
          camera->open();
  
  }
  

  When I change the settings of QML, the viewfinder of the camera doesn't have to be restarted. I can't do it on C++, and if it does not restart without the last line, so I hope someone else can jump in and help.

  Good luck!

  Edit: I' read part of the API of the camera, and nothing not said that this

  // Use the camera pointer to get
  // the current settings.
  cameraObj->getSettings(settings);
  
  // You must cast newFlashMode to a CameraFlashMode::Type
  // to pass it to the setFlashMode function.settings->setFlashMode(CameraFlashMode::Type(newFlashMode));
  cameraObj->applySettings(settings);
  

  will force a reboot of the viewfinder.

• Help! Webcam: How to pass the VIDEO mode to camera mode?

  I used my Webcam in camera mode to take pictures.  Somehow, the 'camera' mode changed in 'video mode '.  I don't know how he did it.  And I do not want to record videos... I want to return to "camera mode".

  How to switch back and fourth from video mode to camera mode?

  I can't find this answer anywhere!  Nor, I understand no button press to switch between the two modes.

  Help, please!

  -Meredith :)

  You will find the answer when you contact technical support on the camera manufacturer's website, or get their manual from their Web site or try to Google for the manual for the unit.

• Camera soft keys come and go while the camera tries to focus

  Hello! My camera on the screen the buttons disappear each time that his tent to focus. It gives me a hard time to take pictures. This happens regardless of the settings or the camera mode is activated. For this reason, I was forced to use Google camera. Did anyone here know how to solve this problem? Thank you!

  I have the same camera as you, that you have not seen this problem. You can try running a repair using PC Companion software?

• How to control the number of fields in the Advanced mode in < af:query >

  Hello
  
  How to control the number of fields in the Advanced mode in < af:query >?
  
  Say I have 20 fields in my table, and I created a view of criteria with 2 fields. This would work perfectly in basic mode. But in Advanced mode , the choice of fields is possible by clicking on the Add fields button. I didn't have the customer to search with all 20 fields. Only 10 fields must be listed in the Advanced Mode, even if there are 20 fields in my table.
  
  How can I control the list of fields in ADDFields button?
  
  Any ideas?
  
  
  
  KR

  You can uncheck the contestable ownership of attributes that you must not appear in the Advanced Mode (but they will not appear in the other modes too!) or by programming the value the same as those mentioned here.

  http://adfcodebits.blogspot.com/2010/11/bit-27-setting-view-object-attributes.html

  Also, you can hide the button AddFields as suggested here - http://www.notjustjava.com/2011/12/cool-tips-to-showhide-components-of-the-query-control-of-adf/

• Camera mode

  For some, this may seem obvious, but in LR3, the camera mode appears anywhere. I find that ISO, shutter etc, displayed below the histogram, but nothing as to the actual camera, AV, TV, M mode?

  Thank you

  Dave

  Change the display of EXIF metadata and you will find lots of information about the way you shot, including exposure mode.

• Low power mode will affect the performance of the camera?

  I take my iPhone 6 on a trip backpack my camera. I intend to put the phone in airplane mode and I wonder if I should also set low power mode. If I put it in low power mode, it will reduce the performance of the camera?

  I suggest that you test this configuration by yourself before you leave.

  You can also consider taking the external battery back up like those manufactured by mophie.

• the iPhone camera App is not memorize the recording mode

  Hello

  I use the default photo from Apple on my iPhone App, especially because I can shoot while the iPhone is locked. No other applications can do that, not even using the Notification Center (other applications for registration as Strava can do it, but not to record video).

  However, I noticed that most of the time (but), mode (video, panorama, photo,...) is not like it was before.

  I turn almost only videos (idling, when outdoors). Whenever I start the camera application, either in the "sweep upward" screen (locked phone), or from the home screen in unlocking the phone, the camera always (or almost) default is still Photo. I have not found a way to default to the video.

  When you have to take action, it is very annoying to have to fumble with the buttons until you can actually draw. Not to mention that the app is so slow that initialize in the meantime, you cannot drag on the video mode (until the camera is completely initialized); then you drag too and the video mode Miss... it's a mess...

  However, sometimes, apparently when you start the camera after making a video, the unit starts in video mode... but you expect it to start in photo mode, you can already drag by anticipation and video mode Miss yet :-)

  The behavior is not very consistent.

  Unless there is something that the camera behave correctly, I think apple should seriously improve at least 3 things in the camera application:

  (1) in previous versions of iOS, the initialization of the camera was not otherwise slow. How about you do it as fast as it was before?

  (2) pass from still photo to video, then to move slow takes too long. The control must be more effective and faster. You should have a faster and more direct access to the different modes of recoding. How about a configurable "by scanning screen?

  (3) the camera app to set the frequency of default images for videos. What about settings for the default recording mode? (video, panoramic)

  Hi there redtomato,

  I understand that the camera on your iPhone app will automatically in video mode you want. If I always had to take videos, I think it would be very convenient to open the camera in video mode application every time I opened it.

  I tried what you said on my end, opening the camera my screen lock and video mode change application then blocking of my iPhone, and then repeat the same steps. Surprisingly, when I conducted my test of the camera to video mode application.

  I'm quite uncertain that if if it is a small problem with iOS, or if it was something that apple designed specifically, or maybe I'm just having chance repeating the steps you mentioned. To help troubleshoot your device, I recommend you to make sure that you use the latest version of iOS if your device is up to date. Once you have done this, try to restart your iOS device and see if you're still having problems.

  On reflection, maybe you can force the camera app to quit smoking? If this is the case, this could explain why you may need to manually change the camera in video mode application each time.

  I think your suggestions are great ideas, and if you want too, you can submit your ideas to Apple directly here: http://www.apple.com/feedback/.

  I love my iPhone and I like the camera on it and especially photography, so I can understand how you feel about the inconvenience, but I really hope the information I've provided help it it, otherwise, if all goes well it will be or is somehow.

  Continue to take great videos!

• Z3 Compact scenes works is not in manual mode of the camera

  Hello. This is my problem: when I use the manual of the camera, the scn button is gray and does not, then the HDR. They worked when I bought the phone at Christmas... No root mod etc. Please help me!

  http://support.sonymobile.com/global-en/xperiaz3compact/Userguide/using-still-camera-settings/

  It should be set to manual mode to 8 megapixels

• "camera" always bring up the camera in auto mode higher

  not like camera app that brings the camera with the previously selected mode, the camera button, always raise camera with superior auto mode.

  not convenience, certainly need to work in harmony?

  Here's how it works, more likely to be able to take snapshots of something you see. Manual mode will no longer to save the photo. In any case, it was sent to sony several times.

• Start the camera in manual mode?

  If you can make the camera to start immediately in manual mode?

  Issue edited by Rickard

  It is not possible when you use the camera button, but if you type "Camera" in the app drawer or he will go to manual if that's what you used the last time the home screen.

• BlackBerry smartphones switches to camera mode when you use the keyboard - ack!

  I'm typing on the keyboard and more on the character 'o' or 'U' to bring up alternative characters, focus, brands, etc., and half the screen upper past in camera mode. Weird. I can get out by pressing the button options, "close". Someone else has what is happening? It is not random, I can recreate it at every time without fail.

  Thank you!

  You have loaded the latest version of the software to http://www.blackberry.com/storm/upgrades ?

• What resolution camera mode is used by the Flash Player camera settings manager

  What the camera resolution is used by the camera Flash Player Settings Manager? I refer to adjustments of the device that you have to pull up with a right-click on a swf file in Flash Player that is currently running, and in the context menu, you click on settings... click on the camera... and then you can press the camera icon bit and will show you the video stream directly from the camera.

  In order to view the live stream, Flash Player asks a camera resolution mode the driver. This mode is requested?

  For example, it would be 160 x 120 @ 30 frames per second?

  Or is it of 176 x 144 @ 30 frames per second?

  http://www.Macromedia.com/support/documentation/en/flashplayer/help/help04.html#117113

  So so the default would be 160 x 120 according to the AS3 API Reference

  We use a Hauppauge camera driver and the test live stream is empty in this dialog box settings of Adobe Flash Player. While we try to coordinate with Hauppauge to add support for their driver of the camera so that the dialog box settings of Flash Player can preview correctly the supply unit.