Listener refused the connection with the following error

Similar Questions

• Listener to refuse the connection with the following error ORA-12505

  Hi everyone, Am really new to the oracle database, I work on my school project work and am stuck in the middle of this error (listener refused the connection with the following error ORA-12505).
  
  I started the time serveral listener and it is said that 'no service supported by the LISTENER', I can't access the database via sqldeveloper including trows on the same error (listener refused the connection with the following error ORA-12505, TNS:Listener currently know of SID given in connect descriptor.) In addition, my em show red arrow down to the listener. Here are my coordinates hard & software.
  
  
  Oracle 11.1.0
  OS: Red Hat Enterprise Linux 4 (running the operating system through Vmware workstation)
  TNSNAME. ORA
  
  LISTENER2 =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  ((ADDRESS = (PROTOCOL = TCP (PORT = 1522))(HOST=localhost.localdomain))
  )
  )
  
  AUDITEUR1 =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1523))
  )
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521))
  (ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1521))
  
  
  
  
  Listner, ora
  
  
  
  
  LISTNER_ORCL
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1523))
  (ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1521))
  )
  
  IMT_ADMI =
  (= DESRIPTION
  (PORT = 1522))
  (ADDRESS = (PROTOCOL = TCP (PORT = 1522))(HOST=localhost.localdomain))
  (ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1523))
  (ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1521))
  
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = imt_admin
  )
  )
  
  LISTENER_IMTADMIN =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP (PORT = 1522))(HOST=localhost.localdomain))
  (ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1523))
  (ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1521))
  
  )
  
  ORCL =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1523))
  (ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1521))
  
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = orcl)
  
  I read on some forums that I need to edit somethings that am not sure cos I don't want to mess with the database, I need help on what to.
  Thanks for the help in advance.

  (ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1521))

  Try to edit listener.ora by:
  (ADDRESS = (PROTOCOL = TCP) (HOST = HOST_NAME_OF_YOUR_DATABASE_MACHINE/OR TRY USING THE IP ADDRESS OF THE DATABASE SERVER MACHINE)(PORT=1521))
  Just try to edit HOST = value line above. You must use HOST_NAME_OF_YOUR_DATABASE_MACHINE or IP OF the DATABASE SERVER MACHINE.

  Host name can be obtained by the hostname command on the database server.

  With localhost, no one can connect to the database remotely.

  Concerning
  Girish Sharma

  Published by: Girish Sharma January 11, 2013 18:26

  then after the output of commands below:
  lsnrctl stop
  lsnrctl start
  Wait 60 seconds...
  ORACLE_SID =
  sqlplus scott/tiger@tnsname

  Show us what is happening now.

• Listener refused the connection with the following error: 12505

  Hello experts,
  
  I am facing the problem for the last two days, when I'm trying to connect to the oracle with sql developer and Jdeveloper database. Previously, it was running fing.
  
  The description of the detal problem is
  
  To perform the requested operation, an error has occurred:
  
  Listener refused the connection with the following error:
  ORA-12505, TNS:listener is not currently of SID given in connect descriptor
  
  
  Code provider 12505
  
  I tested the following text, and every thing seems fine
  ==============================================================
  
  E:\Users\Anutosh > lsnrctl services
  
  LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on August 25, 2012 20:25:34
  
  Copyright (c) 1991, 2010, Oracle. All rights reserved.
  
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)))
  Summary of services...
  Service 'CLRExtProc' has 1 instance (s).
  Instance of 'CLRExtProc', status UNKNOWN, has 1 operation for this service...
  Managers:
  "DEDICATED" set up: 0 denied: 0
  LOCAL SERVER
  The command completed successfully
  
  E:\Users\Anutosh > lsnrctl status
  
  LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on August 25, 2012 20:26:13
  
  Copyright (c) 1991, 2010, Oracle. All rights reserved.
  
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)))
  STATUS of the LISTENER
  ------------------------
  Alias LISTENER
  Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Production
  Start date August 25, 2012 19:04:12
  Uptime 0 days 1 hour 22 min 1 s
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  D:\app\Anutosh\product\11.2.0\dbhome_1\network\admin\listener.ora Listener parameter file
  D:\app\anutosh\diag\tnslsnr\MTECH\listener\alert\log.XML log listener
  Summary of endpoints listening...
  (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=127.0.0.1) (PORT = 1521)))
  Summary of services...
  Service 'CLRExtProc' has 1 instance (s).
  Instance of 'CLRExtProc', status UNKNOWN, has 1 operation for this service...
  The command completed successfully
  
  E:\Users\Anutosh > tnsping orcl
  
  AMT Ping Utility for 32-bit Windows: Version 11.2.0.1.0 - Production on August 25, 2012 21:35:44
  
  Copyright (c) 1997, 2010, Oracle. All rights reserved.
  
  Use settings files:
  d:\app\Anutosh\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
  
  
  TNSNAMES adapter used to resolve the alias
  Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521)) (CONNECT_DATA = (SERVER =
  
  DED
  (ED) (SERVICE_NAME = orcl)))
  OK (20 ms)
  
  Content of tnsnames.ora
  ---------------------------------------
  
  tnsnames.ora # Network Configuration file: d:\app\Anutosh\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
  # Generated by Oracle configuration tools.
  
  ORACLR_CONNECTION_DATA =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
  )
  (CONNECT_DATA =
  (SID = CLRExtProc)
  (PRESENTATION = RO)
  )
  )
  
  ORCL =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = orcl)
  )
  )
  
  Listener.ora
  -------------------
  
  listener.ora # Network Configuration file: d:\app\Anutosh\product\11.2.0\dbhome_1\network\admin\listener.ora
  # Generated by Oracle configuration tools.
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = CLRExtProc)
  (ORACLE_HOME = d:\app\Anutosh\product\11.2.0\dbhome_1)
  (= Extproc PROGRAM)
  (ENVS = "EXTPROC_DLLS=ONLY:d:\app\Anutosh\product\11.2.0\dbhome_1\bin\oraclr11.dll")
  )
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
  )
  )
  
  ADR_BASE_LISTENER = d:\app\Anutosh
  
  Init.ora
  ------------
  
  # Change '< ORACLE_BASE >' to point to the oracle base (that you specify to)
  (# install times)
  
  db_name = "ORCL".
  memory_target = 1 G
  process = 150
  audit_file_dest =' < ORACLE_BASE > / admin/orcl/adump '
  AUDIT_TRAIL = 'db '.
  DB_BLOCK_SIZE = 8192
  db_domain = "
  db_recovery_file_dest =' < ORACLE_BASE > / flash_recovery_area'
  db_recovery_file_dest_size = 2G
  diagnostic_dest = "< ORACLE_BASE >.
  Dispatchers ='(Protocol=TCP) (SERVICE = ORCLXDB)"
  open_cursors = 300
  Remote_login_passwordfile = 'EXCLUSIVE '.
  undo_tablespace = 'UNDOTBS1.
  # You can ensure that the control files are created on the separate physical
  features of #.
  control_files = (ora_control1, ora_control2)
  ' compatible ' 11.2.0 = ".

  Rajat says:
  How can I fix the ITI.
  Could you please suggest anything.

  no listener.ora file is necessary for the LISTENER to operate.
  move, rename, delete, or remove the listener.ora file & then reboot the system.

  each Oracle DB tries once every 60 seconds to register with EARPHONE as shown below

  tail -10 /u01/app/oracle/product/11.2.0/dbhome_1/log/diag/tnslsnr/bcm-laptop/listener/alert/log.xml
   host_addr='127.0.0.1'>
   25-AUG-2012 12:58:48 * service_update * v112 * 0
   
  
  
   25-AUG-2012 12:59:18 * service_update * v112 * 0
   
  
  

• Listener refused the connection with the following error: ORA-12505

  Hello
  

  Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor The Connection descriptor used by the client was: 127.0.0.1:1521:XE 

  Windows XP + Oracle 10.1.0.20
  
  I checked my *.ora files and found the host 127.0.0.1 but I noticed by running the netstat command on prompt back most of my ports is captured by www.360.cn including 1521
  
  When I try to stop the following message is displayed:

  ORA-01034: ORACLE not available
  ORA-27101: shared memory realm does not exists

  Thank you and best regards

  Hello

  [oracle@myoramachine ~]$ oerr ora 12505
  12505, 00000, "TNS:listener does not currently know of SID given in connect descriptor"
  // *Cause:  The listener received a request to establish a connection to a
  // database or other service. The connect descriptor received by the listener
  // specified a SID for an instance (usually a database instance) that either
  // has not yet dynamically registered with the listener or has not been
  // statically configured for the listener. This may be a temporary condition
  // such as after the listener has started, but before the database instance
  // has registered with the listener.
  // *Action:
  //  - Wait a moment and try to connect a second time.
  //  - Check which instances are currently known by the listener by executing:
  //    lsnrctl services 
  //  - Check that the SID parameter in the connect descriptor specifies
  //    an instance known by the listener.
  //  - Check for an event in the listener.log file.
  [oracle@myoramachine ~]$
  

  1. check the lsnrctl services

  2 check the tnsping output:

  tnsping MYORACLE

  3. check the connectivity to the computer hosting your Oracle server to the port (I guess 1521):

  Telnet 1521

  4. in case you are not able to connect to the Oracle Server - I investigate it in several directions:

  -problem of network infrastructure

  -some process disturbing / virus on the server Oracle itself

  -firewall problem

  Good luck!

  ---------------------------------
  http://DBA-star.blogspot.com/

• CRM using SQL database in an environment of small business often inaccessible with the following error message

  Hello

  This is my first time on this forum so bear with my ignorance!  I'll expose the background of my setup and then explain the error.

  We have a small business with a server running SBS2011 and PC running Windows 8 and 8.1 connected to the server in a domain environment.

  We use a CRM product called Emu Tall that uses SQL Server 2008 R2 on the server for the database and the PC run a local application that connects to this database.

  On a daily basis, but completely randomly and sometimes several times a day, a user will try and open the application on a PC and get the following error message.

  Could not load file or assembly 'Microsoft.SqlServer.SqlEnum, Version = 10.0.0.0, Culture = neutral, PublicKeyToken = 89845dcd8080cc91' or one of its dependencies. The system cannot find the specified file.

  At first, I thought it must be a matter of waiting time as it seemed to happen every morning, but I've proved since that it occurs at any time of the day and is apparently unrelated to amount of users or idle time or something like that.

  Here's another oddity that hopefully sheds some light on it. If I go to the server and open the CRM application on the server, it works very well since it is only the PC that have the connection problem.  In addition, as soon as I connected to the server of any PC can connect immediately (until it happens again later in the day).  I don't need to stay connected to the server, connect one time and close the session and he "fixed" it for a few hours for all PC users.

  I contacted the CRM vendor, and they are completely confused and have no idea what to do.

  We are trolling along at the moment with me opening a session on the server for launch launch whenever a user receives the error message but it is far from satisfactory.

  A final observation is that it does not always.  It used to work fine.  The problem began just two months ago and seems to coincide with the increase in our user from 5 to 12 users license even if the CRM provider swear that it is nothing to do with the license.  They may agree; I don't know enough to argue the point.

  Any help will be appreciated! I'm sure it will be a simple solution and someone there will know why and the answer immediately but is elusive at this time.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• After a virus, I am unable to connect to the internet. Event log messages: the NetBios over TCP/IP service failed to start due to the following error...

  original title: NETBios TCPIP of missing in Device Manager

  I recently had to run two antivirus programs on an infected computer and am now unable to connect to the internet. When I went to the event viewer, I noticed the following error messages:

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7000

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The NetBios over TCP/IP service failed to start due to the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The helpdesk TCP/IP NetBIOS depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  When I look in the Drivers folder, I see netbt, but devices & Non Plug and Play Devices, of TCPIP NETBios is not listed in Manager.

  Hi Diddy Dell,

  Follow these methods.

  Method 1: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• I get the following error when I am trying to connect to a network by using different credentials. 1219 system error has occurred.

  Multiple connections to a server or resource shared by the same user

  I get the following error when I am trying to connect to a network by using different credentials.

  1219 system error has occurred.

  Multiple connections to a server or a shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again...

  I don't want to use the IP address. and I don't want to delete all connections using the net use * / delete command.

  Kindly give me the solution as I am now frustrated with this issue.

  Kind regards

  Sajid

  Hello

  ·         Have you tried to access the files that were on Skydrive?

  ·         Did someone else uses your computer?

  From now on, I suggest you try the steps mentioned in the article below.

  Error message when you use user credentials to connect to a network from a Windows computer: "the specified network folder is currently mapped using a different username and password.

  http://support.Microsoft.com/kb/938120

  You can also ask your question in the forum of the Tech Net Windows Server using best.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

  Hope this information is helpful and let me know if you need additional assistance.

• I'm trying to access a wireless network with the password provided for me. I get the following error message

  I'm trying to access a wireless network with the password provided for me. I get the following error message: "the network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 characters ascii or hexadecimal 10 or 26. "what does this error message mean and how do I address so that I can access the wireless network?

  I use XP Professional with service pack 3. I get this error message every other time I try to log in to a protected wireless network security. I used to not get this message; but, now, it may be impossible, sometimes to call all wireless providers when I might only need for a short period or after hours service opening.

  In addition, it is my computer that requires the network password to be different, not the provider of wireless. A password is given to me who works for other users, but my computer won't let me use it.

  Hello

  I suggest you to visit these links and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/the-network-password-needs-to-be-40-bits-or-104/f3fdc3ee-CB40-4107-A632-082093dcdcb8

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/need-to-connect-to-home-wireless-network-Windows/5bf37a22-cc42-4a0f-9d15-83e780f00123

  It will be useful.

• When a computer XP starts, the following errors occur. Can't find Mac addresses, can't find DHCP at startup. PC is not connected to a network. Why would it gives this error at startup.

  When a computer XP starts, the following errors occur. Can't find Mac addresses, can't find DHCP at startup. PC is not connected to a network.

  Why would it gives this error at startup?

  It is not a Windows problem, it happens very early in the boot process until Windows is still a part of the image.  Your computer is configured for a remote network via PXE boot and there is no this PXE server so that you get this error message.  With PXE network boot, you can start a computer without him having a hard drive, the operating system resides on another machine on the network.  When the BIOS does not find the PXE server it gives you the error message, and then it proceeds to the next start equipment, which is probably your local hard drive.  Go into the BIOS and disable the PXE boot option or move it to the bottom of the boot order so that the hard drive is set as the primary boot device.

  John

• Journal of session "Homegroup" was able to start with the following error: 0xC0000035

  Hi my event error log says: session "Journal of home group", was able to start with the following error: 0xC0000035

  I don't have a setup of home group because I am the sole operator of my PC. (Windows 7 SP1 x 64).
  I assume that the error is so wrong? Y/N?
  If so is there a way to change the reports for this message?
  Thanks for all the support.

  Hello

  1 are you facing a problem to work with any application because of the error?

  2. do you have connected on a network printer?

  3. you remember changes to the computer before the show?

  I suggest you try the following:

  Run a scan of the System File Checker.

  http://support.Microsoft.com/kb/929833

  Also, make sure that homegroup is not created on the computer, even if the computer is not connected to the other computer. When you configure a network device it will prompt you to create a home group. Check the following link to leave a homegroup.

  http://Windows.Microsoft.com/en-us/Windows7/leave-a-HomeGroup

• Impossible to analyze the xml.aspx contained in the main.js.Iam get the following error"could not obtain XML document, and the connection has failed: status 500

  Impossible to analyze the xml.aspx contained in the main.js.Iam get the following error"could not obtain XML document, and the connection has failed: status 500

  My main.js resembles

  xmlDataSource var = {}
   
  URL: 'dcds. - symbianxml.aspx", etc. (sample).
   
  init: function() {}
  URL, successful reminder, the reminder of failure
  This.Connect (this.) (URL, this.responseHandler, this.failureHandler);
  },
   
  /**
  * Analyzes the XML document in an array of JS objects
  @param xmlDoc XML Document
  * @returns {table} array of objects of the device
  */
  parseResponse: {function (xmlDoc)}
      
  var chElements = xmlDoc.getElementsByTagName ("channel");
     
  channels of var = [];
    
  Console.log (chElements.Length);
    
  for (var i = 0; i)< chelements.length;="">
      
  var channel = {};
     
  for (var j = 0; j)< chelements[i].childnodes.length;="">
      
  var node = Sublst.ChildNodes(1).ChildNodes(0) chElements [i] [j];
              
  If (node.nodeType! = 1) {//not an element node}
  continue;
  }
         
  Channel [node. TagName] = node.textContent;
  }
     
  Channels.push (Channel);
  }
  Console.log (Channels.Length);
  return the strings;
  },
   
  /**
  Manages the response and displays the data from device web app
  @param xmlDoc
  */
  responseHandler: {function (xmlDoc)}
    
  var channel = this.parseResponse (xmlDoc);
  var markup = "";
     
  for (i = 0; i< channels.length;="">
     
  markup += this.generateHTMLMarkup (i, channels [i]);
  }
  document.getElementById("accordian").innerHTML = mark-up;
  },
   
  /**
  Generates HTML tags to insert in to the DOM Web App.
  * @index i, index of the device
  @param device, device object
  */
  /*
  generateHTMLMarkup: function (i, channel) {}
    
  var str ="";
  "Str += '.

  
  ' onclick =-"mwl.setGroupTarget ('#accordian ',' #items_" + i + "', 'ui-show ',' ui - hide');" + ".
  "mwl.setGroupTarget ('#accordian ',' item_title_ #" + i + "', 'ui-open', 'ui-farm'); Returns false; \ » > » ;
  "" Str += "" + channel ['name'] + ' ";
  "Str += '.
  ";
  "Str += '.

  ";
  "Str += '.

  "+" id: "+ channel ['id'] +" ' "

  ";
  "Str += '.

  "+" type: "+ channel ['type'] +" ' "

  ";
  "Str += '.

  "+" language: "+ channel ['language'] +" ' "

  ";
  "Str += '.

  «+ "bandwidth:" + "fast" channel + "»»

  ";
  "Str += '.

  "+" cellnapid: "+ channel ["cellnapid"] +". "

  ";
  "Str += '.

  «+ ' link: '+'start the video »»

  ";
  "Str += '.
  ";
  return str;
  },*/
  generateHTMLMarkup: function (i, channel) {}
     
  var str ="";
  "Str += '.
  ";
  str +=  "" +
  "" + channel ['name'] + ""+""
  ";
  "Str += '.
  «+ ' link: '+'start the video »»
  ";
       
  return str;

  },
   
  failureHandler: {function (reason)}
  document.getElementById("accordian").innerHTML = "could not get XML document.
  '+ reason;
  },
   
  /**
  Retrieves a resource XML in the given URL using XMLHttpRequest.
  @param url URL of the XML resource to retrieve
  @param called successCb, in the XML resourece is recovered successfully. Retrieved XML document is passed as an argument.
  @param failCb called, if something goes wrong. Reasons, in text format, is passed as an argument.
  */

  Connect: {function (url, successCb, failCb)
    
  var XMLHTTP = new XMLHttpRequest();
    
  XMLHTTP. Open ("GET", url, true);

  xmlhttp.setRequestHeader("Accept","text/xml,application/xml");
  xmlhttp.setRequestHeader ("Cache-Control", "non-cache");
  xmlhttp.setRequestHeader ("Pragma", "non-cache" "");
    
  var that = this;
  XMLHTTP.onreadystatechange = function() {}
     
  If (xmlhttp.readyState == 4) {}
      
  If (XMLHTTP. Status == 200) {}
       
  {if (!) XMLHTTP.responseXML)}
  try {}
  If server has not responded with good an XML MIME type.
  var domParser = new DOMParser();
  var xmlDoc = domParser.parseFromString(xmlhttp.responseText,"text/xml");
         
  successCb.call (that, xmlDoc);
         
  } catch (e) {}
  failCb.call (, "answer was not in an XML format.");
  }
            
  } else {}
  successCb.call (that, xmlhttp.responseXML);
  }
  } else {}
  failCb.call (this, "connection failed: status"+ xmlhttp.status ");
  }
  }
  };
  XMLHTTP. Send();
  }
  };

  Please see the content in main.js is fully analyzed.

  Forward for the solution to my request all members of the community...

• 6.2.16: when you try to update Itunes, I get the following error message: "there is a problem with this package of can I install."  A program required for this install to complete could not be run.  Contact your support team / packages vendo

  6.2.16: when you try to update ITunes on my Windows laptop, I get the following error message: "there is a problem with this Windows Installer package.  A program required for this teaching to complete could not be run.  Contact your supplier of staff or the package of support ".  There is no associated error code.  I've never had a previous issue with ITunes updates.  Thank you, Debbie

  Repair Apple Software Update since the programs & features Panel configuration and then try again.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Hello! The new version of Firefox, I have a problem with the opening of the site VKontakte. The browser displays the following error message: "Firefox has determined that s.

  Hello!
  The new version of Firefox, I have a problem with the opening of the site VKontakte. The browser displays the following error message: "Firefox has determined that the server redirects the request for this address in a way that it will never end." How to solve this problem? Please excuse me for my English.
  Sincerely, Vsevolod.

  This can be caused by corrupted cookies or cookies that are not sent or otherwise blocked.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  See also:

  • http://KB.mozillazine.org/The_page_is_not_redirecting_properly
  • http://KB.mozillazine.org/cookies

• Just recently, I receive the following error message when you try to access the web sites. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" then I have to click ok. There is a problem with some plugin?

  Just recently, I receive the following error message when you try to access the web sites. I use Firefox browser version 10.0.2. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" as the web site page is displayed in the browser winder. So, I have to click ok. Any link/website I go to what happens. There is a problem with some plugin?

  It is only a problem for the SiteAdvisor users who are still on 3.4. This problem is resolved in the latest version of SiteAdvisor, which is 3.4.1.195. Go to http://siteadvisor.com and click on download. This will fix the problem.

  Meanwhile, SiteAdvisor team will push down a JS update in the coming days 1-2 to automatically resolve this problem in version 3.4.

• Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  If a shortcut is used while Firefox is already open the error will not occur.

  For me, the problem was the FoxClock extension. Once I disabled it, the problem was gone.

  Hope this helps.

  Olivier