Lists - dark color

Similar Questions

• PSE "Inner Glow" does not work for dark colors?

  Hello

  I had a question for users of PES. I use Photoshop CS3 at work, at home, I have PSE 9 and my question is:

  PS CS3 when I do an inner glow, I can use any color, and it works very well, however, I noticed when I do the same thing with the layer in PSE Styles, I can only choose bright colors. If I try to choose anything, like for example black, the effect does not appear again. No particular reason, why this happens?

  There is another thread on this subject here, but the answer does not exactly answer my quesiton.

  Another thread: http://forums.adobe.com/message/2482587#545257

  Everything seems strange, as trying to apply this effect to a shape I am limited to bright colors, which does not give me the effect that I would watch.

  Also, I tried to create the same form of basis, the same colors, all in PS CS3, and then I recorded, it opened to post-secondary studies and went to layer-> glow Styles / inner glow and it works very well! How does make any sense? I can handle at this moment with the dark color and change it to everything I like and copy the style layer between Forms, works very well. As soon as I try to do the same thing with another new form and just directly go to layer-> glow Styles and make the effect that, even once, dark color does not work. Which does not much sense to me, since clearly can be judge by copy layer style, as it's just a color, no other effect on it.

  Any ideas? To be, so far, this seems to be a small problem with the software that I can't really understand how do I manipulate and copy the style with the dark, once I bring him in the PS CS5 PSD, but as soon as I try to re-create it manually with the same exact conditions, that it fails.

  Thanks for reading, forward responses.

  (I enclose below a picture of what I mean, this picture is the thread listed above, but rather illustrate the 'problem').

  Kind regards

  Adam

  In photoshop using the inner glow, you should change

  the blending mode of the inner glow of the screen to normal for dark colors show.

  Of course, this varies according to the colors of text and the background and the effect you want.

  Photoshop elements by default does not allow to change the blend modes inner a glow.

  Here is an example of a workaround using red text on a white background to a black inner glow:

  Departure:

  

  1. prior to applying the inner glow duplicate your text layer and turn off the

  the lower text layer visibility.

  

  2. go in layer > layer style > settings of Style or Alt-double click

  the thumbnail of the layer of text in the layers panel to display the Style settings.

  

  3. go in the effect controls panel and the layer styles > visibility

  and choose hide. (the text disappears)  This is the same as the definition of the fill of the layer

  0% in photoshop.

  

  4 make a new white layer under the text on the top layer.

  

  5. click on the text layer at the top and choose merge down from the context menu

  

  6. turn on the visibility of the layer of remaining text.

  

  Result:

  

  There are other means and if you use one of the internal light predefined in the elements, you

  can get varied results.

  MTSTUNER

• How can I change the beige tabs with white text to the text of the tabs beige with black (or another dark color)?

  Classic restoration changed by FF 29 tabs beige with black text on the tab active and beige with white text on other open tabs. The white text is not visible. How can I change the text in white with a darker color?
  If this cannot be done, is there a way to reinstall FF 29 with just the security updates (and not all the other stuff) so that I can keep my 28 FF settings? Thank you.

  1. Open the modules (Ctrl + Shift + A Manager; Mac: Command + shift + A), then the Extensions category.
  2. Beside the classical restaurant theme, click on the Options button.
  3. Click the custom colors tab, then the less than (active/hover/default) tab.
  4. Below (active) tab, check 'Text', then click on the color swatch and choose black.
  5. Click the tab (unread) / new tab.
  6. (Unread) tab, check 'Text', then click on the color swatch and choose black.

• How can I make the fonts on the darker color of Safari

  How do the fonts in Safari a darker color. They are a light gray now and hard to read.

  You can not.  Customize the format/style/color/type of fonts is not possible in Safari.  You're stuck with what Safari renders for that particular Web site.

• Video issue of Cannon T5i - dark colors out rasterized to research.

  Video issue of Cannon T5i - dark colors out rasterized to research.

  So I was messing around with the video manual settings on the Canon T5i. However the dark colors always look polyhedral.

  I tried 1080 p 30 fps shutter 1/60 f / 4 iso 200 all the way up to 800 always the same question.  I even went up to 1/125 shutter iso 800 still the same issue.

  Given that I use the kit lens EFS 18-55 mm.  I just ordered the Sigma lens 50mm 1.4 should therefore have this week by post.  But for now, I would like to at least fix the problem, I'm going to.

  Any idea or pointers are welcome.

  See vid of test in order to have at least an idea of what I am referring.

  You may not need better lighting.  Perhaps all you need is a lens with a larger aperture.  Which type of installation of the device and the goal are you use, or used, to be drawn from this sample?

• Image on the screen will continuously to a darker color, then back to normal colors.

  Original title: display dims

  Recently the image on my screen constantly hard a darker color, then go back to normal colors.

  It happens during the startup process, update the content on a dynamic web page (including the mouse over events) and when I move the mouse on quick start icons in the taskbar.  It is also occurring in the mmo game, which is more annoying.

  Any suggestions on how to fix this?

  Thanks for the suggestion.  I'll keep it in mind.

  When I posted this question I had brought no other than Windows updates recent changes.  I had been a few days, see evidence of the problem at each start.

  Last night I rolled the system back a few days earlier and have since had two on two boots in which the problem appeared.  If it returns then I will try to update the graphics driver.

• What is the best way in grayscale, an image that has a lot of dark colors?

  I try to calm black and darker colors so that they are all shades of gray for a book coloring grayscale. Some pictures when I use various means of grayscaling, the darker colors are still too dark. Especially in the lower left Tulip. If I try the dodge tool, looks almost a blur. I tried the 'levels' but maybe I do not just? Original and my version of shades of gray... can someone tell me how they would do?

  

  

  It's a matter of taste, but you could do a separate B & W adjustment layer to manage the lower left Tulip, but it is close enough to black and gray. The small amount of magenta in there can be lit and then hidden from the rest of the image.

  

  The maybe a B & W beneral adjustment layer.

  

  Finally, a layer of curves to adjust black and gray.

  

• Paint on the layer in Photoshop with lighter color makes the color paint more light go under the darker colors? How can I fix it?

  I have Photoshop CC

  When I use paint tool to paint on lighter colors on a layer, it always goes under the colors darker on the same layer. Even if I paint the darker color first and the lighter color, second, the lightest color continues to go under the darker color. And it's all happening on the same layer too! It's like photoshop is to order the colors based on what color goes on top and what colors light up and down in the order how dark the color is.

  How can I do so that the color that I finally painted goes on top?

  See the blending mode in the Toolbar Options paint is set to Normal.  There is a parameter 'Behind' who will actually do what you describe.

  Also check your layers panel blend modes and settings for each layer.  Maybe not relevant in the present case, but recommended when the strange behavior happens in the layers.

  Gene

• Dark colors

  Dark colors is black in photoshop but not during the Save as an image.

  Help, please!

  If you have RGB (0, 255, 255) in a document in Photoshop, which display is black instead of light cyan in Photoshop?

  Si Yes, so I expect you to use a card with a buggy driver AMD/ATI graphics. A solution for this is to use the catalyst 12.8 or catalyst 13.2.7 beta or possibly the very new beta version. Here is a link to 13.2.7 beta.

  http://support.AMD.com/us/KbArticles/pages/AMDCatalyst132BetaDriver.as px

• The tab text is yellow and blurry and unreadable on something else than the darker color tab

  Tabs appeared suddenly yellow, white, or green color with a yellow blur text unreadable. Only way to read the text on the tab must change each individual tab to the darker, gray but still blurry text. I want to go back to the tabs of the way they were with black text.

  Hello, please update to version 18.0 extension colorful tabs :
  https://addons.Mozilla.org/firefox/addon/ColorfulTabs/versions/

• Now too dark colors

  I'm sure I've seen an Epson print driver update pass, but since it was longer than 30 days there I can't see it in my account more.  Since then, Pages print my colors too dark.  I have a bunch of cards and card biz in printing Pages and ruin my Stallion now.  I know it's a problem of pages because I can print to PDF and print preview and the colors are very well.  What's up with Pages of color matching?

  It will be a real problem if I have to take all my Pages greeting cards.

  I have a professional level Epson 3800 printer.

  Are you talking about Pages 5.6.1?

  Have you tried Pages ' 09?

  Peter

• LaserJet Pro 200: Impression of dark color LaserJet Pro 200 m251nw

  I recently bought and installed a printer of Color LaserJet Pro 200 and have noticed that when I print anything either in the color of the image is very "dark".

  When I print the example page, via the touch screen, the image seems very bright and vibrant. However, whatever it is printed via my computer throug h that an application is dark with almost oversaturated colors.

  I downloaded and installed the most recent driver from the HP site and nothing has changed. The printer is connected wireless to the home network and I tried not directly connected to the computer at the moment.

  Any suggestions would be greatly appreciated.

  Hello

  In the Printing Preferences screen (click Properties or settings of the print dialog box in the application used to print to access printing preferences screen), try disabling the HP EasyColor option in the color tab.

  Also try to select the themes of different colors like photograph (sRGB) or Photo (Adobe sRGB).

  You can see any difference with the results then?

  Shlomi

• a badge of the value-based list background color

  Hello

  I am using Apex5 on Oracle 11 g. I'm playing the plugin list Badge to come with Apex packaged Application, I would like to know if it is possible to change the background color (fill color) of the badge round based on the range of values, for example, I'm working on a few badge tickets report, I am critical, high, medium, low budget, what I want is that the values is 0 (no tickets) and then display the badge as green Cycle; If 1-10, show orange. If greater than 10, shows red.

  Thank you

  Mike

  I thought about it. Here's what I did:

  Create a refreshment after DA (java script based) and java scripts:

  $(".t-BadgeList-value").each (function () {}

  If (parseInt ($(this) .text ()))<>

  $(this).css({"background-color":"green"});)

  on the other

  $(this).css({"background-color":"red"});)

  });

  Thank you

• Display the ToolTip on the list of colors

  Is it possible to display a ToolTip to display the name of the color?

  http://S10.postimg.org/94rd93scp/Z034.PNG

  Here is my code for the ComboBox color rendering

  import javafx.application.Application;
  import javafx.collections.FXCollections;
  import javafx.collections.ObservableList;
  import javafx.scene.Scene;
  import javafx.scene.control.ComboBox;
  import javafx.scene.control.ContentDisplay;
  import javafx.scene.control.ListCell;
  import javafx.scene.control.ListView;
  import javafx.scene.layout.StackPane;
  import javafx.scene.paint.Color;
  import javafx.scene.shape.Rectangle;
  import javafx.stage.Stage;
  import javafx.util.Callback;
  
  
  public class ProvaComboRendering extends Application {
     
      @Override
      public void start(Stage primaryStage) {
         
         
          StackPane root = new StackPane();
          ComboBox<String> cb = new ComboBox<String>();
         
          cb.setPrefSize(150, 20);
          root.getChildren().add(cb);
         
         
          Scene scene = new Scene(root, 300, 250);
         
          primaryStage.setScene(scene);
          primaryStage.show();
  
      ObservableList<String> data = FXCollections.observableArrayList(
              "chocolate", "salmon", "gold", "coral", "darkorchid",
              "darkgoldenrod", "lightsalmon", "black", "rosybrown", "blue",
              "blueviolet", "brown");
       
        cb.setItems(data);
       
        Callback<ListView<String>, ListCell<String>> factory = new Callback<ListView<String>, ListCell<String>>(){
            @Override
            public ListCell<String> call(ListView<String> list){
                return new ColorRectCell();
            }
        };
       
        cb.setCellFactory(factory);
        cb.setButtonCell(factory.call(null));
       
      }
        static class ColorRectCell extends ListCell<String>{
            @Override
            public void updateItem(String item, boolean empty){
                super.updateItem(item, empty);
                Rectangle rect = new Rectangle(120,13);
                rect.setStroke(Color.BLACK);
                if(item != null){
                    rect.setFill(Color.web(item));
                    setGraphic(rect);
            }
          }
        }  
  
      public static void main(String[] args) {
          launch(args);
      }        
  }
  
  

  Just add

  setTooltip (new Tooltip (item));

  in your updateItem method (...).

• of appearance - too dark colors

  I run this on a Mac and now windows 8 and the version of windows the curved Bezier handles are dark blue and change the background does not help me be able to see them.

  Why is it dark blue? I would like to change them into white or a lighter color code temporal or other numbers in the effects window are a lighter blue.

  where can I change this in white?

  no problem on the mac version.

  Hello

  The latest version of Premiere Pro has the blue interface has changed. It seems that you have updated to the latest version only on the Windows computer. (Premiere Pro 20141 CC to be exact)

  Unfortunately, there is no way to change the blue color.

  And on a Mac, you can run an older version (Premiere Pro CC 2014.0.1 in my opinion, if you're the PP CC 2014)

  Thank you!

  Regalo