Live in DC Sweep analysis display

Similar Questions

• Problem flashing with live viewing with IMAQ Image display

  Hello world

  I am writing a program for live imaging with camera Andor. I use some examples from Andor. The images are acquired in sequence and send in Image IMAQ and also graphical intensity display. There is minimal flicker issue in the graph of the intensity, but it is very bad flickering problem in display Image IMAQ. Maybe I wrong understand how to optimize vision tools. Does anyone know how to fix this? I enclose the code that I have tested. Thanks in advance.

  Best regards

  Han Yen

  HI Han,.

  You should try a right-click on the screen and choosing "snapshot". Who help me? In addition, you have a while loop nested in a while loop and the Interior more than while loop I see you have a Subvi I have not (GetMostRecentImage16) according to what is in this VI, this could slow down things - especially since the chart and display have to wait for the most secret while loop at the end of execution before the update.

  You can remove the inside while loop?

• Problems connecting to the Inbox in Windows Live Mail email get "cannot display this page".

  Experiencing major problems in email inbox but no other problems with internet connections. Internet Explore doesn't keep saying "cannot display this page" it has that started happening in the last few days and is produced also from other friends so assume this isn't just a problem with my computer. Is that what I can do to fix it please.

  Submit all Live queries on the forum right here:

  Windows Live Solution Center
  http://windowslivehelp.com/

• Windows Live Mail Inbox does not display the sender first name

  In the Inbox Windows Live Mail how can I change the order of the shipper and the Re?  I have two new computers and two new Windows Live Mail.  On one, the command is correct.  Name of the sender is first in bold and easy to see.  On the second computer the Re is the first, in bold.  Name of the sender is second, smaller in size and hard to see.  I want to first see the sender name.  I have Windows 7 Home premium 64-bit for both computers.

  You have the pane of folders on the left, the list of messages in the Center and the reading pane on the right.

  You see the inconvenience of having the reading pane on the right.  The list of messages is not wide enough to display the number of columns.

  You can display the reading pane on the bottom.  View tab, reading pane,... Bottom

  At the top of the list of messages, right-click a column header, columns...

• Windows Live Mail desktop is not displayed correctly

  When I use the Windows Live Mail program on my computer, it does not display clear fonts.

  It is connect to my outlook account.

  The icons of menu items at the top and the reading Committee are crystal clear and sharp; but the Panel of the Inbox, calendar Panel and any other Panel I open it police washes out and falling out after I go over it. I can't read at all.

  

  It looks like a map display to work setting. If you have a graphics ATI/AMD with CCC, disable morphological filtering or morphological anti-aliasing - probably in the games of the CCC section.

• Live streaming video is not displayed

  When I connect on this site, everything displays correctly except that where the camera feed is supposed to be there is only a white square.

  Download Windows Media Player Firefox plugin from http://interoplabs.blob.core.windows.net/wmpff/wmpfirefoxplugin.exe

  Install it and restart Firefox.

• Notification and analysis display twice in the application group

  Hello
  
  In 2 of our environments, Reporting and analysis showing twice in the Group Applications & put in service... We are confused about provisioning as we anticipate Reporting and analysis for all users...
  
  Even in LCM export it by showing twice, and export of LCM is also the same production output...
  
  How can we remove a Reporting and analysis of our environment...

  Looks like you have installed a second instance of the R & A Executive Officer. It is a known bug in 11.1.2.1 and can be resolved by following the steps described in the patch # 12552933.

• The analysis/display an RSS feed with the format of the attribute

  Hello

  I'm trying to integrate a RSS feed on a tab of my application. The question I have is that he is not an .xml file, I'm managing myself. It is hosted by an external source, and as the most common form of. How can I convert on the fly in (the attribute format)? From there, I know how to access and list data in a ListItem.

  I'm not very experienced with C++, so I hope this is not too advanced. Some of the directions to the right tutorials would be appreciated.

  Thank you!

  Thanks for the suggestion of dridk, but I understand the problem.

  I was missing LIBS +=-lbbdata in the .pro. It works now.

• part of Windows live left hand - Laft tile disappeared

  I lost the left pane in the windows live photo gallery. He displayed my files photo in chronological order. How can I get that back?

  Hey Allen Isenberg,.

  For assistance with Windows Live Photo gallery please join experts from the Windows Live Solution Center community. The link below will take you to their forum which focuses on the Windows Live Photo Gallery:
  Windows Live Solution Center - Photo gallery

• Cannot display images in Windows Mail after upgrade to IE 9

  I recently updated my Internet Explorer 9 version to another. Previously, when I opened my email using Windows Mail, images will present as a red x, but there is a bar at the top of the email saying something like 'Images have been blocked to prevent computers unauthorized access to your computer, click here to view the images. It has always worked.

  Now, since the upgrade to IE 9, when I open Windows Mail and then an email with 'blocked images', the bar that I have just described is gone. I can't understand how to display the images now, without this bar that gives me the choice to do so.

  How can I fix this so I can get the back bar, or view these images 'stuck downloading '?

  Thank you very much in advance!

  PS: I have Windows Vista Home Premium, Service pack 2, with a 32-bit operating system (where you need this information).

  This isn't the only problem you will encounter.

  The lack of trombone, the bar block images and the police is the lack of compatibility between IE9 and Windows Mail. Your choice is:

  • Remove IE9.
  • Use a different mail client.
  • Live with it and to display the attachment by opening the message in its own window and access the attachment this way.
  • Read all messages in plain text. Who will solve the problem of fonts and show the paper clip.
  • To fix the 'Blocked the Images' bar, go to tools | Options | Security and uncheck: 'block images... '. ».

• Windows Live keeps closing down and ask every time to close Windows Live Messenger

  whenever I try to shut down my pc, it says windows live keeps closing down, it displays an option to close messenger, but neither im used to nor I want to click it every time. can anyone solve this little problem of mine?

  Hello

  they will help you with your questions/problems Messenger when repost you the link below in the Messenger forums

  http://windowslivehelp.com/product.aspx?ProductID=2

• HOWTO: Translation Live in C++ similar to re-translate in QML

  WARNING: To come long post!

  If you've built (or building) your apps BlackBerry 10 Aboriginal stunts with internationalization in mind, then you have probably dotted with QML qsTr() calls and macros tr() C++ code. When your application starts the text wrapped in qsTr() or tr() is replaced by the localized text for the local unit and the language (if defined, otherwise default text is used). This works fine unless you change the language setting on your device while your application is running. Unless you take measures to propagate the change to the language through your live webcam app, the text displayed in your application will not match the settting of language new device only when your application is restarted. QML provides this translation of 'direct' with the re-translation class, which can be used with qsTr() update of translations that soon the language setting of the device is changed:

  Page {   Container {      Label {         id: label01
  
           // ---This label's text will be live translated         text: qsTr("Label 1") + Retranslate.onLanguageChanged      }      Label {         id: label02
  
           // ---This label's text will be static translated         text: qsTr("Label 2")      }   }}
  

  In this example, label01 will be his attribute of translated text live as it is updated as soon as the device language is changed. However, label02 will have only his attribute of text translated when the software is first started and the language changes following while the application is running will not update to it.

  With the help of the re-translation with QML class makes direct translation as simple as the addition of a small amount of code just after each use of qsTr(), but C++ does provide no such convenience. To implement the translation directly in C++ code, it is necessary to call setXXX() for a string with the macro tr() attribute slot once to do the initial translation and then connect the setXXX() slot to an instance of LocaleHandler that emits a signal every time the language (or locale) changes. It's complicated by the fact that the LocaleHandler knows that the language has changed, but he doesn't know which key text to provide openings, it is attached to the then must fix the LocaleHandler signal to an intermediate location that knows what translation of key to use for this attribute, and then emits a different signal with the key as a parameter that must be connected to the slot machine control setXXX() . This means that, for every single control attribute you want live, translate you'll need a separate intermediate location set somewhere, a signal linked to this site and two calls QObject::connect(). For EACH attribute that we want to live translation. Of course, this becomes very ugly, very fast.

  I prefer to use C++ with QML little or not to expose my app pages so I was determined to find a solution that was easier to use than retranslating in QML (or almost) and after some trial and error I came up with a solution that I am very satisfied. The core of this technique is a C++ class called LiveTranslator. The syntax to use is a bit more complicated to use QML re-translation, but as re-translation you only need to add a line of code for each attribute that you want to translate live. Here is the header for LiveTranslator:

  #ifndef LIVETRANSLATOR_HPP_
  #define LIVETRANSLATOR_HPP_
  
  #include 
  
  using namespace bb::cascades;
  
  class LiveTranslator: public QObject {
      Q_OBJECT
  
      QString _key;
      QString _context;
  
      static LocaleHandler* _localeHandler;
  
  public:
      LiveTranslator( const QString& context, const QString& key, QObject* target, const char* slot );
      static void setLocaleHandler( LocaleHandler* localeHandler );
  
  private slots:
      void localeOrLanguageChangedHandler();
  
  signals:
      void translate( const QString& string );
  };
  
  #endif /* LIVETRANSLATOR_HPP_ */
  

  .. .and the body...

  #include "LiveTranslator.hpp"
  
  // ---Initialize the locale handler pointer on app startup so we can tell if it has been set properly later
  LocaleHandler* LiveTranslator::_localeHandler = 0;
  
  // ---Note that the target control is also used as the parent so the live translator dies when the control does
  LiveTranslator::LiveTranslator( const QString& context, const QString& key, QObject* target, const char* slot ) :
          QObject( target ) {
  
      bool success;
      Q_UNUSED( success );
  
      // ---Save the context and key string
      this->_key = key;
      this->_context = context;
  
      // ---Die (during debug) if the locale handler hasn't been set properly before use
      Q_ASSERT( LiveTranslator::_localeHandler );
  
      // ---Watch for locale or language changes
      success = QObject::connect( LiveTranslator::_localeHandler, SIGNAL( localeOrLanguageChanged() ), SLOT( localeOrLanguageChangedHandler() ) );
      Q_ASSERT( success );
  
      // ---Trigger specified slot when locale or language changes
      success = QObject::connect( this, SIGNAL( translate( const QString& ) ), target, slot );
      Q_ASSERT( success );
  }
  
  void LiveTranslator::localeOrLanguageChangedHandler() {
      // ---Use the specified slot on the target to update the appropriate string attribute with the translated key
      emit translate( QCoreApplication::translate( this->_context.toLocal8Bit().constData(), this->_key.toLocal8Bit().constData() ) );
  }
  
  // ---This function MUST be called once with a valid LocaleHandler before any LiveTranslator classes are instantiated
  void LiveTranslator::setLocaleHandler( LocaleHandler* localeHandler ) {
      LiveTranslator::_localeHandler = localeHandler;
  }
  

  LiveTranslator encapsulates all the ugly stuff, including remembering the key to the translation, the intermediate signal/slot, and all signal/slot connections necessary for direct translation. Use is as simple as creating an instance of LiveTranslator, passing the constructor the translation for the attribute key (and the context, but more on that later), the Visual control of the target and the location on the control that accepts the update of translation. Note that tr() only works with static keys chains...

  // ---This is valid
  QString str1 = tr("string one");
  
  // ---This is not!
  Qstring str1 = "string one";
  QString str2 = tr(str1);
  

  .. .so instead tr(), LiveTranslator must use QCoreApplication translate() internally.

  An example of use of LiveTranslator :

  MyClass::MyClass() {
      Label* label = Label::create().text( tr("Label one") );
      new LiveTranslator( "MyClass", "Label one", label, SLOT(setText(const QString&)));
  
      Option* option = Option::create().text( tr("Option one") ).description( tr("Option one description") );
      new LiveTranslator( "MyClass", "Option one", option, SLOT(setText(const QString&)));
      new LiveTranslator( "MyClass", "Option one description", option, SLOT(setDescription(const QString&)));
  
      ActionItem* actionItem = Option::create().title( tr("Action one") );
      new LiveTranslator( "MyClass", "Action one", actionItem, SLOT(setTitle(const QString&)));
  }
  

  Note that there is no need to save a reference to the new instance LiveTranslator since the constructor sets the 'target' as a parent control. When the control is destroyed by your app the LiveTranslator will go with him. The first parameter to the constructor LiveTranslator is the 'context' where the translation key. When you use the macro tr() (or function qsTr() QML) the code parser mentions of where he found the key and stores it in the translation file. This way you can use the same key for translation on different pages, and if the context is different, you could have them translated differently. The parser doesn't know anything about the LiveTranslator class but it must indicate the context explicitly. For C++, the context is always the name of the class containing the code that you are translating. In addition, in case it is not obvious, the "key" parameter must be the same value used with tr() on the input line.

  There is one thing that you must do before using LiveTranslator in your C++ code and that is to give it a LocaleHandler to work with. Rather than force you to spend a LocaleHandler for each instance of LiveTranslator, you tell LiveTranslator that one to use only once with a static function call. If you created your application from one of the Momentics models then you already have a Manager, you can use:

  ApplicationUI::ApplicationUI() : QObject() {
      // prepare the localization
      m_pTranslator = new QTranslator( this );
      m_pLocaleHandler = new LocaleHandler( this );
  
      // Use this locale handler for all the live translations too
      LiveTranslator::setLocaleHandler( m_pLocaleHandler );
  
      ...
      ...
      ...
  }
  

  I enclose the source for LiveTranslator so all you need to do to get the direct translation working in your BB10 native C++ code is extract the zip in your src directory, add a call to LiveTranslator::setLocaleHandler() in your main application class constructor, and then call new LiveTranslator (...) with the appropriate settings for each attribute of the control you want to be living translated. I hope that is useful to the native BlackBerry 10 development community wonderful (and long-suffering).

  IMPORTANT!

  The instructions posted above have been extended and improved to work with some additional user interface controls such as SystemDialog and SystemUiButton. It was published with a link to a sample application on GitHub as an guest article on the Blog of Dev of BlackBerry. Additional functionality has been added to the original code shown above, then the blog article and GitHub example now consider the definitive description of this technique.

  See you soon.

• Link results in two on a single dashboard analysis reports

  Hello

  I thought it would be easy but so far I've had no chance of finding a solution.  What I want to do is to create a dashboard with two different analysis reports (both with views of table).  When the user clicks a line on the first analysis, the data on the second analysis is updated to show only the data based on a common key-filter value.

  For example, if displayed A analysis of the sales by year and B analysis displayed by region, when the user clicks on a line of analysis, the results are updated on the B analysis to show only the data for the selected analysis year a.

  Basically, I want to have the same functionality as the events of master / detail that is available for different views within an analysis, but put it implemented on a dash between two separate analysis reports.

  Any help is appreciated.

  Thank you and best regards,

  Kevin

  Check the blog below pt2.

  http://how2learnobiee.blogspot.in/2012/09/master-detail-report-feature-of-Obi-11g.html

  Thank you

  AJ

• start DW CC 2015 with 'code' 'split' 'live' rather than 'code' 'split' 'design '?

  Is it possible to implement DW CC 20015 to open a statement with Live discovered among the display options?   I tried to save the workspace with the 'code' 'split' and 'live', as options of three display and when I reopened DW 2015 she returned to the 'code' 'split' 'design'

  Thanks for your suggestions

  Artoo

  Watch as default in split view workspace

• subtitle in prompt analysis

  Hello
  
  I used OBIEE 11.1.1.5
  
  When I create a prompt analysis, always appears a subtitle under the command prompt. I would like to disabled options, how?
  
  In the subtitle said as part of the analysis, display an image to better explain.
  
  [IMG] My picture of problem
  
  
  Thank you
  
  Published by: Benito Camelas on 1 Sep 2011 09:24

  You can get rid of the subtitle by adding a text element in the dashboard (not the report itself!) and in the box put the following text:

  Be sure to check the box to contains the HTML markup.

  Paul