Live migration of HYPER-V Server R2 2012

Hello

I have a new Hyper-V 2 built node cluster. Storage is presented through SAN. Live-Migration network, network Public, private network and virtual switches-2 VMS-MGMT. These boxes are hardware identical; HP DL580 G7 with a lot of horses. I am running Windows Server 2012 R2 Datacenter Core on each node. My problem is, I validate cluster, and I get no error at all. This is a brand new clean install, but for some reason any I can only migrate from one node to another and not return without having to reboot a node after live migration. I don't know what I'm going? Has anyone already experienced this? A peer of mine installed the same scenario in a different data center and it does exactly the same thing too. Which leaves me to believe it's OS or hardware related?

Any help will be greatly appreciated!

Thank you!

This issue is beyond the scope of this site and must be placed on Technet or MSDN

http://social.technet.Microsoft.com/forums/en-us/home

http://social.msdn.Microsoft.com/forums/en-us/home

Tags: Windows

Similar Questions

  • Hyper-V Server R2 of 2012 on Dell R510 - how to check RAID health?

    Hello, guys!

    I have Poweredge R510 with Hyper-V Server R2 2012 as host operating system. I suspect the material problems and I need to check the consistency of the disc. What software can I use with Hyper-V Server? You will need to check the RAID health. When you start the server I see no error in the Configuration of SAS utility.

    In the event log, I see:

    11 event ID driver has detected an error of the controller on \Device\RaidPort0.

    EventID 153 operation the e/s to 2 b 0 address of the logical block to disk 0 (the PDO name: \Device\0000003f) was retried.

    Thank you!

    You can run OpenManage on the host.  Page 59 of this link gives you a guide:

    FTP://FTP.Dell.com/manuals/all-products/esuprt_software/esuprt_ent_sys_mgmt/esuprt_ent_sys_mgmt_opnmng_sw/Dell-opnmang-Srvr-Admin-v7.3_User ' s%20Guide3_en-us.pdf

    Kind regards

  • How to migrate a virtual VC server to another host ESX with different CPU ID

    Hello

    by updating my equipment VI 3.5 of old AMD Single Core of AMD Quad-Core a problem has occurred: the new CPU´s of course have a different CPU - ID, so it is not possible to do a live migration of my virtual server VC from the old machine to the new one.

    A migration cold is of course not possible, because after the stop server vc I ve no connection via VC Management Console... of course

    How can I get my VC-virtual server running on new hardware, I guess that there must be a solution and I hope I m not the only one, who runs a virtual VC server and must change the material

    I look forward to any possible solution, thank you very much.

    Heinz Kabisch

    If the VCVM is on the only shared storage remove the virtual machine from the old host and enter it on the new host by connecting the VI client to each host. TO register to browse the store of data and right click the .vmx file and click Save

    If not on the shared storage (but I hope it is) you can copy the files from the virtual machine (*.vmdk and.) VMX file) from one host to another using the SCP. Then connect to the new host using the VI client and enter the VM VC

  • Hyper-V backup fails VSS in Windows Server R2 2012

    When I try to do a backup of a VM (just the virtual machine, nothing else selected) on my Windows Server R2 2012 machine, I get the following error:

    I still have to find an answer to this question.

    Log name: Application
    Source: SPP
    Event ID: 16387
    Task category: no
    Level: error
    Keywords: Classic
    User: n/a
    Computer: BitVault
    Description:
    Microsoft Hyper-V VSS Writer writer experienced an error during the creation of the snapshot.  More information:.
    The event XML:

     
       
        16387
        2
        0
        0 x 80000000000000
        2746
        Application
       
       
     

     
        Microsoft Hyper-V VSS Writer
       
       

        Writer experienced a transient error.  If the backup process is started, the error does not happen. (0x800423F3)
        Unknown error (0x80004005)
     

    It's about getting the VSS event log

    A VSS writer has rejected an event with error 0x800423f3, the writer experienced a transient error.  If the backup process is restarted,
    the error does not recur.
    . The changes that the writer made to the writer components while managing the event is not available to the applicant. Check the event log for events from the application hosting the VSS.

    Operation:
    PrepareForSnapshot event

    Context:
    Execution context: writer
    Writer class ID: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de}
    Writer name: Microsoft Hyper-V VSS Writer
    Writer Instance ID: {4736e32f-5954-4b83-9ca5-37c560f308d5}
    Command line: C:\Windows\system32\vmms.exe
    Process ID: 3556

    PS C:\Users\Administrator > vssadmin list writers
    vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
    (C) copyright 2001-2013 Microsoft Corp.

    Author name: 'Task Scheduler Writer'
    The writer ID: {d61d61c8-d73a-4eee-8cdd-f6f9786b7124}
    Writer Instance Id: {1bddd48e-5052-49db-9b07-b96f96727e6b}
    Status: Stable [1]
    Last error: no error

    Writer name: 'recorder VSS metadata store.
    The writer ID: {75dfb225-e2e4-4d39-9ac9-ffaff65ddf06}
    Writer Instance Id: {088e7a7d-09a8-4cc6-a609-ad90e75ddc93}
    Status: Stable [1]
    Last error: no error

    Writer name: 'Performance Counters writer. "
    The writer ID: {0bada1de-01a9-4625-8278-69e735f39dd2}
    Writer Instance Id: {f0086dda-9efc-47c5-8eb6-a944c3d09381}
    Status: Stable [1]
    Last error: no error

    The writer's name: "System Writer".
    The writer ID: {e8132975-6f93-4464-a53e-1050253ae220}
    Writer Instance Id: {2ff32bb9-b4dd-4959-bfa9-7ea79b4567ba}
    Status: Stable [1]
    Last error: no error

    Author name: 'ASR Writer.
    The writer ID: {be000cbe-11fe-4426-9c58-531aa6355fc4}
    Writer Instance Id: {4b7e63c6-ecb1-47f2-b317-e665b5de8c8c}
    Status: Stable [1]
    Last error: no error

    Author name: 'Microsoft Hyper-V VSS Writer.
    The writer ID: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de}
    Writer Instance Id: {4736e32f-5954-4b83-9ca5-37c560f308d5}
    State: [8] failed
    Last error: error renewable

    Author name: 'Dedup Writer'
    The writer ID: {41db4dbf-6046-470e-8ad5-d5081dfb1b70}
    Writer Instance Id: {5ac93c0a-dc01-4564-bac9-23051e2783a7}
    Status: Stable [1]
    Last error: no error

    Author name: 'Shadow Copy optimization Writer. "
    The writer ID: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
    Writer Instance Id: {a24b7ea7-e48b-44eb-9521-585648b7951b}
    Status: Stable [1]
    Last error: no error

    Name of the author: "COM + REGDB Writer".
    The writer ID: {542da469-d3e1-473c-9f4f-7847f01fc64f}
    Writer Instance Id: {b9b0674c-119c-4345-870d-fadc0e7beda4}
    Status: Stable [1]
    Last error: no error

    Author name: 'Registry Writer'
    The writer ID: {afbab4a2-367d-4d15-a586-71dbb18f8485}
    Writer Instance Id: {30a6302b-d5c8-4b9a-a0b7-61049e1c4767}
    Status: Stable [1]
    Last error: no error

    Author name: 'WMI Writer'
    The writer ID: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
    Writer Instance Id: {74ee0321-a546-4f94-a624-c715f2290db4}
    Status: Stable [1]
    Last error: no error

    PS C:\Users\Administrator > Get-VMIntegrationService - VMName

    VMName name active PrimaryStatusDescription SecondaryStatusDescription
    ------ ----                    ------- ------------------------ --------------------------
    Home time true synchronization OK
    House real Heartbeat OK OK
    Pair key / value of home Exchange real OK
    House real stop OK
    House VSS True contactless
    House Guest Service Interface fake OK

    Hello

    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    TechNet Hyper-V Forum.

    https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winserverhyperv

    See you soon.

  • MS win Server R2 2012 and Hyper-V issue licenses

    My company has 60 employees (and 60 desktops / laptops) and currently have an old principle that server solution of Microsoft Basic with element a cloud as Office 365 for email only. We seek to reduce the estate of server to Server (2 CPU - Dell PowerEdge T610), it currently runs on two old but not sterilized systems running Windows Server 2003 R2 (Dell PowerEdge 2900) and Windows Server 2008 R2 (Dell PowerEdge T610).

    In the short term, we want to create a brand new installation of MS Windows Server R2 Standard edition 2012 who will manage our advertising (and DC) and support businesses main accounting IRIS software that requires a MS SQL DB. This cloud all must be configured to allow integration with MS Azure Site recovery to allow us to turn up in the azure of the VM disaster. In my view, this means that the configuration of the OS as a Hyper-V virtual machine instance.

    The new server Win 2012 R2 has not really be a VM as its only one instance that I need, but from what I can make out, I need to make a virtual of Hyper-V machine to join the recovery Site of France. I can't determine exactly what license I need to achieve however. Any help would be appreciated.

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
    *
  • UCS C240M4 with the server Hyper-V R2 from 2012.

    Can I know if I want to install Hyper-V server on the server C240M4, the Host Configuration utility stand? any procedure and how to install it?

    • To install the Hyper-V role, Windows Server 2012 Standard Edition or Datacenter edition is required.
    • Hyper-V is supported only on x 86-64 Windows variants
    • It can be installed until the system is full or basic installation.
    • The stand-alone Hyper-V Server variant does not require an existing installation of Windows Server 2008 or Windows Server 2008 R2. Stand-alone installation is called Microsoft Hyper-V Server for non - R2 and Microsoft Hyper-V Server 2008 R2 version.

    a quick google search gave me this:

    https://en.Wikipedia.org/wiki/Hyper-V#System_Requirements

  • VMware ESXi 5.1 can run Microsoft Hyper-V Server 2012 SMV also, nice!

    I created a detailed instructions (with screenshots and video) using GA-level code here:

    http://tinkertry.com/ESXi-5-1-running-hyper-v-Server-2012

    using the "basic" version of the new Hyper-V, with tips and ideas from these forums and other sites on the previous beta tests.

    Here's the gist:

    • Create a "Microsoft Windows Server 2012 (64-bit)" VM, using the default Configuration
    • Right click on the new virtual machine and material virtual upgrade to Version 9
    • twist the VMX, adding these 4 lines:

    MCE. Enable = TRUE

    Hypervisor.CPUID.v0 = FALSE
    featMask.vm.hv.capable = Min:1″ «»
    VHV.enable = TRUE

    • Remember, it is assigned to a network where the vSwitch is Promiscuous Mode to Accept
    • Turn on the new machine virtual of Hyper-V
    • perform the default installation and configure Hyper-v, hard IP-code if you wish, create an Admin user and password name that matches a customer's system
    • create a Windows 8 'customer' VM, as the Hyper-V Manager takes just a few seconds to add
    • Difficulty of COM security on the client system
    • use Hyper - V Manager this virtual machine to connect to Hyper-V, and then...
    • create a Hyper-V hosted Virtual Machine, can connect you and turn it on to test

    I'm looking forward to suggestions or alternative methods, but for the moment, it was the only way I could get it to work in my own laboratory, thought that others might not want to try to replicate this exercise.

    Windows Hyper-V (not supported) is a selection of OS comments available through the user interface in Workstation 9.  It defines the guestOS to 'winhyperv '.  Although the selection of the BONES of Hyper-V is not available through the user interface of 5.1 ESXi, I understand that support it is always there.

  • Migration of Essential Business Server 2008 Hyper-V to ESXi 5

    Hello world

    I would like to start by saying this would be my first time on these forums posting and get my feet wet with ESX, so please be gentle! After being loaded to a backup plan, I decided to give up the use of Hyper-V and use ESX. We currently have Essential Business Server (EBS) 2008 which consists essentially of 3 Server 2008 virtual computers running on top of Hyper-V. I tried to install from scratch on the ESX host without a bit of luck, the installation process is VERY specific and fails during the installation process. There was no clue as to how to fix it, I just got a dialog box saying just reformat and start over; He gave a second shot, but again fell flat on his face. And here, I discovered the VMware vCenter Converter Standalone Client, seems to be the ideal solution, because we want a backup job! So far 2 servers have been migrated with 1 only being able to boot successfully to the operating system. The other is a domain controller, that I read can be very difficult to migrate and they are particularly sensitive to the hardware changes. Article I read seemed only to cover NT-2003 domain controllers not sure if I can go according to the Dec.

    I'm curious to know if anyone has had some luck in the same case to EBS 2008. I found no guides on the EBS installation on an ESX host, and as much as I'd like to use something different, I'm stuck with it for now. Is there something I'm missing when migrating the DC? The only option I changed was to install VMware Tools after migration and add a NETWORK adapter as the default does not select a network adapter. I still have an Exchange Server, which also acts as a domain controller, to migrate, but I wonder if I'll run into the same problem. I really want to do this work and any suggestions would be helpful.

    So, in summary: vm migrated from Hyper-V to the ESX host, using converter, DC won't boot to the operating system in normal or safe mode it just hangs.

    If you have managed to come out with a hot clone of your ad and it looks fine, you can continue with this, however when you clone a DC a cold clone is always recommended / generally fewer problems because that AD is a sequence of the database which has no way to turn it off.  A cold clone allows you to boot into a linux boot CD environment to clone the box, which means that no service is running, which means you get all the data.

    As far as your question DMZ will you have 2 options.

    Option 1 (keep simple)

    You can spend 1-2 psyhical NICs on the host ESX for a vSwitch DMZ, this may however considered a "waste of nics' However, it maintains the simpler and allows you to connect all the same way, as if it where psyhical.  For example:

    vSwitch0

    Service Console VMnic0

    VM Network Vmnic1

    vSwitch1

    Network DMZ Vmnic2, Vmnic3

    You would then just plug vmnic2 and vmnic3 on the host computer in your DMZ ports on your switch.  When you create your VM create you 1 virtual network adapter and bind it to the VM network and create a 2nd virtual nic to bind to the DMZ network.

    Option 2

    VIRTUAL LOCAL NETWORKS

    A VLAN allows the traffic of tag so you can route different traffic at different locations.  It also allows you to separate the networks so they can't communicate AKA DMZ or test laboratory.

    In VMware, you can tag VLAN on your groups of ports and then based on the balance sheet that you put on your switch ports switch will route traffice to the location.  For example, if you have your network DMZ with a VLAN 10 all traffice leaving this virtual switch when it hits your switch psyhical will have a tag VLAN 10.  So when your switch psyhical see this traffic (if it is configured correctly) he'll see oh this traffice to VLAN 10 I have this Router to port 2 on my firewall to your dmz ect.

    I hope that this makes the sence or helped shed light on the subject.

  • Support for WMI 1.5 tools on Server 2008 R2 and Server R2 2012

    We currently plan to migrate tools WMI 1.50.1131.0001 on Server 2008 R2 and Server R2 2012. The application is compatible on the aforementioned platforms?

    Hello

    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    See you soon.

  • Nested error Server R2 2012 - "hypervisor does not work.

    Good afternoon

    I'm having some trouble from a virtual computer inside my 2012 R2 VM server. I search around the internet for a while find several articles and forums on how to configure nested visualization including the official document on these forums but I still have a problem.

    My configuration:

    Physical server running - ESXI 5.5 1623387

    Physical machine - dell R720 (2 x e5-2690 - supports the VT - X and the EPT and it is enabled in the BIOS, esxcfg confirms with '3')

    New VM - Server R2 2012, VM version 9 installation (created by the web console vmx-09)

    I added / tried every configuration option I found:

    -J' created the virtual machine console web and checked "expose hardware virtualization assisted for the guest OS.

    -I made that vhv.enable = "TRUE" in the vmx configuration

    -J' tried to add hypervisor.cpuid.v0 = 'FALSE' to the vmx configuration

    -J' tried to add vhv.allow and more vhv.enable in the/etc/vmware/config, but neither makes a difference (discovered he was not necessary later thanks to a post on this forum)

    -J' tried to set the name of guestOS to "winhyperv" in the .vmx file

    -J' tried the type parameter of "ESXi 5.x" guestOS in the thick client

    -J' set the cpu/mmu virtualiztion tick at the last

    -J' tried to set the registry values level 1 as seen here ecx

    -J' have ensured that monitor.virtual_exec = "hardware".

    -J' uninstalled the hyper-v role and reinstalled after you make these changes without result

    -J' tried an another 5.5 ESXi 1331820 host with these settings and it does not work (VT - X confirmed as well)

    -J' tried 2016 instead of 2012 R2 server and it does not work

    I think it's all the things I tried. I'm sure I've probably missed something very obvious, but any help would be appreciated.

    This specific virtual machine has not generated a vmware.log file but still one of my virtual machines to test (with the same exact questions on the second physical host) has generated a couple and I enclose you one of them, and more can be provided if necessary.

    Thank you!

    Post edited by: Ian details price changes

    It seems that the latest Hyper-V does not like hardware virtual version 10.  However, it seems not be satisfied with version 11 of virtual equipment.

  • Adobe Reader on Server 2008 R2 and Server R2 2012 support

    We are currently migrating the following versions of the software Adobe Reader on Server 2008 R2 and Server R2 2012.

    Name Version
    Adobe Reader 8.0.08.0.0
    Adobe Reader 8.1.08.1.0
    Adobe Reader 8.1.18.1.1
    Adobe Reader 8.1.28.1.2
    Adobe Reader 8.1.38.1.3
    Adobe Reader 8.3.18.3.1

    Can I find out if these are supported on the above operating systems? Responses from developers would be very appreciated.

    To find out which versions are compatible with your operating system, go here: Adobe - Adobe Acrobat Reader DC Distribution

  • Server R2 2012 on ESXi 5.1

    I'm building a test lab and I managed to install Server R2 2012 but I'm unable to activate.  During the activation process, you receive an error from slmgr '0xc004fd01' and when you google you get nothing.  Then I ran the command 'slui 0x2a 0xc004fd01' and received the details of «Windows is not running on a Microsoft Hyper-V virtualization platform» supported  I've never seen a Windows OS essentially prevent it be enabled on VMware.  Someone at - there a work around for what I would try Server R2 2012 in order to test out new features and think it's weird that I could use it only on Hyper-V.

    Capture.PNG

    Hi Chdecarl01,

    Thank you for reporting this issue.  What is the nature of the product key you use to activate the comments?  The activation keys for automatic Virtual Machine (AVMA) article on automatic Virtual Machine to activate TechNet should raise an error like that, unless the client is running in Hyper-V.

    See you soon,.

    --

    Darius

  • Problem installing VMWare Workstation on a Server Windows 2012

    Hello

    I have problems when trying to install VMWare Workstation on a Server Windows 2012. Windows Server is Amazon EC2 environment and a generic image extended release.

    The problem is that the installtion process fails because of "Hyper-V" during installation, but after investigating the option "Remove roles and features" I can see that it is not installed.

    Is there any fixes for this issue?

    I enclose three screenshots for you pleasure.

    Regards, Ray...

    Hello Ray,

    Welcome to the VMware community forums.

    You run an EC2 instance that has just 615 MB memory installed?

    It's kind of a weird for a host, much too low for Amazon memory configuration, even be profitable.

    I think that your server is running UNDER Hyper-V, for example. It is probably a Virtual Machine.

    You can easily check that yourself by running the script from this site:

    How Hyper-V to: detect if you are inside a virtual machine

    If it's a Hyper-V virtual computer then I don't think you can install VMware Workstation on the virtual machine and run the nested clients.

    You could do the opposite (invited running hyper-V in a workstation virtualized on vSphere) but is not very fast.

    As you have no control over which platform virtualization Amazon use for their windows servers, I'm afraid you will have to go for a dedicated server instead of a virtual machine.

    Hope this helps,

    --

    Wil

  • ESXi 4.1 error live migration

    I have 2 servers Esxi 4.1 in a HA cluster with a dozen of VM (Windows and Linux hosts). Due to limited resources, we had to add a server more Esxi 4.1 (spec material for guests shown below). The idea was live migrate virtual machines from existing hosts to the new host. Pretty strange of the virtual machine will not migrate direct and throws the error message "host CPU is incompatible with the requirement of the virtual machine to CPUID level 0 x 800000001 register"edx"...» (screenshot attached).

    esxi1 (hosts in cluster HA)

    esxi2 (hosts in cluster HA)

    esxi3 (new host added)

    3 x DL360 g5 with Intel (r) Xeon 5130 CPU @ 2.00GHz and 4CPU X 2 GHz.

    As a work around, I can poweroff these virtual machines and migrate them to newly added host and switch on. This seems to fix the problem automatically incompatible cpu.

    Now, I'm puzzled to understand whats going on. I'm sure that someone out there had a similar experience and might have answers.

    you need to activate tehcnology Intel VT in the bios. Some manufacturers call it virtualization technology in the bios. Once you turn it back on, save it, then turn off the server and boot to the top. This gives a power cycle to cool off in ready mode of VT.

    Here's the tutorial for Dell server, but it is not far for other manufacturers. http://www.vmwareinfo.com/2009/02/enable-VT-and-EVC-in-Dell-BIOS.html

  • My account is migrated to a new server, so I had to recreate the same account in Thunderbird, but I can not delete the old one - they appear together now.

    My account is migrated to a new server, so I had to recreate the same account in Thunderbird, but I can not delete the old one - they appear together now.

    If there is no email from the old account that you want to keep, move them in local directories first.
    Tools > accounts settings
    OR
    Right click on the email account in the fodler pane, and then select "settings".

    Select the account you want to delete.
    Click on "Actions account."
    Select 'delete account '.
    Click OK

    See the image as an aid:

Maybe you are looking for

  • New MBP affected by frequent kernel panics and crashes application

    New MBP affected by frequent kernel panics and application crashes. If anyone can identify which can cause a kernel panic, I would be very grateful.  Latest kernel panic today documented report below I already finished the Apple data download procedu

  • Pre-release version of Windows Vista will expire

    I had to download this version of Vista on my HP computer as one that came on the computer was so buggy it was unueable most of the time. I now get a message telling me that "this pre-release version of Windows Vista™ Home Premium will expire in 0 ho

  • problems with Vista and msn

    my laptop had vista business on it originally, it crashed a year ago and the store put windows 7 Home Edition premium on it, last week I had to have my hard drive changed due to problems with it and computer scientist put my vista business back on it

  • (Redirect) DEll Inspiron 3537 starts do not

    I created a partition of my Dell Inspiron 3537 & when I tried to reboot it is not commissioning. Only a Dell logo is displayed and an error message appears on a blue screen. Is it possible that my HARD drive is crashed? Or is it possible first to eit

  • How to find the product key of Windows 7 or Windows 10

    I have a laptop of lenovo B590 which was preinstalled windows 7 ultimate. I upgraded to windows 10 as requested by microsoft. and it works well. but I don't have the product key for windows. so, if I get any problems in the future and I need to reins