LJ 1536 and Wireless Bridge: prints and scans but lost connection Toobox ePrint

Similar Questions

• AcrobatX worked well both printing and scanning when harwired to my computer. I went wireless and Windows programs work well both printing and scanning, but not Acrobat.

  Using Windows7 - I tried Windows10 but restored to 7.

  AcrobatX worked well both printing and scanning when connected to my computer. I went wireless and Windows programs work well both printing and scanning, but not Acrobat. In Acrobat, we don't get the scanner and printer prints in a .prn e-file, not to the printer.

  Help please...

  OK - I'VE CORRECTED THE PRINTER WHICH HAS BEEN INEXPLICBLY THE 'PRINT TO FILE' VALUE, BUT THE SCANNER IS STILL MISSING.

• HP Officejet 6500 a Plus won't copy. It allows to print and scan but copies are empty. Windows XP

  I have a HP Officejet 6500 has more.  It allows to print and scan but the copies are to come in white.

  Hey, here's a link for y our question, it says empty and white scans copies, but it breaks down in their own separate headings, here is the link: http://support.hp.com/us-en/document/c03111687

  If that does not help the problem, a sequel to the above listed link I would do a hard rest is: while the printer is on, pull on the power cord to the printer and the wall. After 30 seconds reconnect power to the wall and printer. This will trigger a 'dirty power upwards' and restoring the printer to a State well known (if possible). No user settings are lost with a "hard reset." I'm pulling directly the instructions for this process of a hardware instruction guide. I'm sticking to it would have shown here Word for Word. I hope this helps

• I have a Packard Bell computer laptop, installed speedypc and scanned but pc still keeps freezing

  Oh my? is my title lol

  * original title - Hi got packard bell laptop computer, installed speedypc and scanned but pc still keeps freezing - silly instrucs pse - thx * need help of pse - no new download installed and has had this prob for a few days.

  Hello nettynooross,

  Here attached a link where other users have had this problem.  There are several steps to try.  I hope this helps out.

  Microsoft Answers:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/my-computer-freezes-randomly-and-is-doing-it-more/21b36130-50c8-41d2-B82C-5655f32a7831

  Thank you

• Windows Fax and Scan do not connect to fax

  Recently installed Windows 7 Home Premium. Trying to get Windows Fax and Scan to fax in my HP Officejet J4580 multifunction device. Install the HP drivers, printer and scanner work OK and fax device appears under devices and printers. With the device on and in Fax Setup, select 'Connect to a Fax Modem' generates an error: "an error has occurred. Please try the operation again later or contact your administrator. "It's strange because the fax device appears to be installed correctly and is recognized by Windows.

  How can I get Windows Fax and Scan to recognize and connect to the fax?

  Windows 7 set my printer and fax as separate devices (HP C6180 all-in-One) - should also ensure that the fax was NOT DESIGNATED as a PRINTER in the dropdown under printer properties - you can have the same problem in reverse...

• Problem with Windows Fax and Scan does not connect to the Internal Modem

  Just got a new Acer Aspire 5542-5416 computer laptop with Windows 7 64 bit Home Premium, 4 GB of Ram and a 320 GB hard drive. It has a 56 k modem integrated fax of like the old days, but I can't make it work. The laptop did not come with the Windows CD.

  If I open the program Windows Fax and Scan, it is not able to connect to the modem. Basically, if I click on tools > fax accounts > Add..., I get a box with 2 choices: to connect to a fax modem or connect to a fax on my network server. When I want to connect a fax modem I get a message that says: an error has occurred. Please, try the operation again later or contact your administrator. It allows me to do this then just clock OK and them I'm right where I started.

  While in Windows Fax and Scan, if I click on tools > fax settings... nothing happens. No menu settings or anything ever appears. Quite simply, the program does nothing. If I try tools > Fax Status Monitor... I get a box that says entrance exam status, ready to receive a fax. It has a blue progress bar as something takes over, but it gets about 1/100 to and never goes further or ends. There is no box, but there are 3 buttons: view details, answer call or cancel. If I hit details, I get an empty list. If I click on answer call I get an error that says that the fax service is not available.

  If I try tools > Options, general tab has only a single option box is checked: play a sound when come it to new messages. If I try to print a Word or PDF file to a fax using Fax in the printer list, I get the same box with 2 choices: to connect to a fax modem or connect to a fax on my network server, but I get the same error message: an error has occurred. Please, try the operation again later or contact your administrator.

  I've searched the Internet high and low for a solution but no luck. There is a lot of discussion about this problem, but none of the solutions work for me. If I go to Device Manager, the modem is working properly and if I click on the Modem query on the Diagnostics tab, it seems to be able to communicate with the modem very well. I tried to roll back the driver and updated again and still no luck, same problem. If I go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Fax\Accounts in the registry, there is no subkeys under the folder accounts I can delete.

  Has anyone else had a similar problem? Is there any solution for this? I did a Windows Update last night and has not yet solve it. Thank you.

  Sorry about that.

  Here is the link:

  http://social.msdn.Microsoft.com/forums/en-us/windowscompatibility/thread/c75ae899-D05B-411D-a7f2-00fdd33b8589/

• I downloaded Maleware bytes and scan, but none appear not on my screen

  I downloaded the Maleware bytes, the Super Scanner and Cnet, but none appears on my screen. I know I have to do something to install them, but do not remember what it is I do.

  She came back to me how to install programs. It had been a while! Download the program, and then double-click it to install it.

• Windows is ready to connect to a different printer/fax/scan but is prevented by a screen of the administrator who does not provide a place for the entrance of the administrator password? e

  What can I do with windows vista to allow my laptop to access the different one printer?

  Hello

  Welcome to the Microsoft community.

  I see that you are unable to connect to another printer/fax/scan machine.

  To help you with this issue, I would need more information:

  1. you are connected as a guest account?

  2. are you connected to a domain network?

  3. What is the full error message?

  Please return with the necessary details so that we can help you better.

• HP8600 can print on network, but may not use ePrint or install updates

  Hi all

  I have a HP 8600 Pro A-I-O printer connected wireless to my network using a static IP address.

  When it comes to printing, I have no problem. Until a few days ago, I had to restart the printer every day because it seemed to lose network connectivity. However, once I manually configure a static IP address that problem has disappeared.

  My problem is twofold. But, I'm sure they have a root cause, that's what I turn on the forums to resolve.

  1. When you log on the Server Web integrated, the ePrint shows my printer (with IP address) box, and then a red X, and then click the eprint. It is said that ePrint is on. I then page details.

  Here, it shows ePrint on and Apps. But it shows a big red X between the printer icons and ePrint and propose a fix of this link.

  When I entered the patch from this link, it will attempt to connect to the server and then returns cannot connect to the server.

  It is a basic home network connected to the Comcast/Xfinity cable, you use a Netgear WNR834b router connected by modem cable BEE. There is no proxy involved server.

  When you configure my IP information I used the DNS of Comcast (75.75.75.75) server and the DNS (8.8.8.8) Google Server, so to leave it blank. However, none of them solve the problem.

  FWIW: WINS is enabled under advanced network settings. However, it has no IP address configured for WINS. Would it be the cause of the problem?

  My network consists of a computer laptop Windows 7, Ubuntu 14.04 dasktop (not on all the time), the HP8600 and various devices based on Android.

  Any suggestions?

  Thank you

  Robert

  OK, so I 'think' I hae the problem solved. It seems that the default gateway setting if necessary, be set to the IP address of the router, not the IP provided by Comcast/Xfinity. I wish this was a little more clear in the documentation.

  Once I changed to the same as the router, I could download and update the printer; and ePrint seems to be online.

  Now, I have a strange situation where the boxes of the printer status and ink level status are red, with no info on the EWS page. But, given that the original issue seems to be resolved, I this will mark as resolved.

• Why I can't find my network wireless on my XP laptop but can connect to my Vista laptop?

  So here's my situation.

  I have a small laptop with Windows Vista Home Premium 64-bit
  I also have a laptop with Windows XP Service Pack 3 on it
  We just moved into a new House.  In our old House we had DSL with wireless router and two laptops where able to see and connect to the network.
  In our new home even company and probably even router if I'm not mistaken my computer Windows Vista laptop sees and connects to the wireless network.
  However, the XP laptop sees about 10 networks wirelss in screen 2 wireless network connection, but not ours.
  Here's what I've tried so far:
  -Tried to restart the router
  -Tried to restart the laptop
  -Tried to update the drivers for the wifi
  -Tried manually to create a wifi network of same name and enter the key
  I'm really ideas, especially since he could see and connect the network in the old House 2 days ago.   So it comes even to see my wifi network listed may not even try to move on the part of tent to connect and enter the key.
  Any help would be much appreciated and if someone needs more information let me know.
  JF

  Hello

  I suggest you to follow the steps below and check if it helps.

  Method 1: Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows?T1=Tab03

  Method 2: How to troubleshoot wireless network connections in Windows XP: http://support.microsoft.com/kb/870702

  (Valid for Windows XP service pack 3)

  Hope this information is useful.

• HP Envy 5530 ceased copy and scan but still printing

  Whenever I try to copy or scan HP Envy ends up with a whirling blue circle and the only way I can stop it is to disable HP Envy or turn off the power.

  I have reset by putting off power HP Envy countless times.

  I reinstalled the software/driver x 2

  I fixed the permissions of the drive on OS X

  I restarted OS X several times.

  Nothing has solved this problem, which I didn't last week. Help!

  Found printer was still under warranty, talked to Technical Support and it's a hardware problem.  Replacement on its way.

  Thank you.

• Can copy and scan but not print with my hp deskjet all-in-one 1515

  Hello

  Pls help! I can't print. I can scan and photocopy with my hp deskjet printer 1515 all-in-in-one, but I can't print. I tried to print with my computer laptop windows 7 and was able to print but I can't print using my regular laptop, which is a laptop HP 650 which uses windows 8.1. When I send a document to print is says it is printing and shows in the print queue and then disappears. What can I do? He has not even print a test page but it printed a page of information and the alignment of catrige page.

  Hello

  Please, try the following steps and let me know if that can help you:

  1. In the Control Panel, select uninstall a program and uninstall the driver software base HP Deskjet Ink Advantage publicly traded 1515.
  2. Click the R keys on your keyboard and the Windows Logo appears in the Run dialog box.
  3. Spool type and click OK.
  4. Open the Drivers folder, and then select the x 64 folder if you have a 64-bit OS or the w32x86 if you have a 32 bit OS
     Note: visit http://whatsmyos.com/ to find your type of operating system if necessary.
  5. Open the 3 folder, locate the HPBXPSRENDER. DLL file and rename it to HPBXPSRENDER. OLD
  6. Reinstall the latest version of the HP software:
     http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-117537-4&cc=us&DLC=en&LC=en&OS=4158&product=5385208&sw_lang=

  Shlomi

• PIXMA MX870: Can print and scan but can not fax. Phone number is correct

  Seems to work, get ther 'beeps' for a while, then get a report saying that the transmission is incomplete.  I don't know what to do from here?

  Hi CCC70,

  It is recommended that you contact the direct technical assistance. There is NO charge for this call. Information in real-time to a technical assistance call live would be very beneficial in this case.

  Please call 1-866-261-9362, Monday - Friday 10:00-10: 00 ET (excluding holidays). A Canon technical support representative will be able to solve this problem more quickly.

• printer 5530: scan does not connect to the server

  Can not scan documents. On my printer screen appears "there was a problem connecting to the serverI.

  The cords are properly pluged. Router is working as wel as internet connection. Please help me solve the problem

  Hey @Jola34,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I see that you are having problems with the help of scanning to E-mail on your 5530 desire. I can help with that. To resolve this problem:

  1. Turn your printer off.
  2. While the printer is turned off, unplug your router for a minute.
  3. Once you have internet connection try once again scanning to Email.

  If allows you to analyse then we will need to do the following:

  1. On your printer, click the icon in the upper left corner that looks like a tablet with a phone beside her.
  2. Click settings.
  3. Click on delete Web Services.
  4. From the main screen, click the icon at the top left again.
  5. Click on accept.
  6. Click Yes.
  7. Try scanning to E-mail.

  If your printer is connected to your HP account logged (for ePrint or instant ink) we need to add back.

  1. Connect to your connected HP account.
  2. Click the devices tab.
  3. Click Add a device.
  4. Add the printer back by entering the claim code that was on the printed paper earlier.

  Let me know if you have any questions. If this resolves any then please let others know by clicking on accept as Solution below my post.

  I hope this helps and I hope you have a nice day!

• HP4500. Wireless: Wireless HP4500 - prints Test Page but nothing else

  I just bought my first iMac.  I also have a HP (Windows) laptop connected wireless to a HP Officejet 4500 Wireless printer/fax combination for work.  For the new iMac, I loaded the software from the HP drive.  The test page printed beautifully, but nothing prints.  No e-mail, not a word processor file, nothing.  I have tried the uninstall / reboot / reinstall way nothing helps.  I saw the instructions to configure a static IP address, but I'm not sure what could do to my current computer-printer link.  Any suggestions?

  Unfortunately, I am not sure I can reproduce the steps but I finally got my printer to work.  I had to install a new driver from HP and Hello "Multifunction" from Apple.  After several reboots, the printer works now.  Sheesh!