LJ200 will only print black

Similar Questions

• Color LaserJet CP1518ni: HP Universal Print Driver for Windows PC (64-bit) will only print black on Color LaserJet CP1518ni

  HP Universal Print Driver for Windows PCL6 (64-bit) will only print black on Color LaserJet CP1518ni

  Also, would like to have the complete software program to download rather than just the universal driver.

  Hello @wyodude

  Try this

  Go to devices and printers and right click on printer properties then go to device settings and go almost all the way down to the type of device a color change and save the changes then go in the printer preferences and in the color tab, make sure that in its unaudited grayscale printing option

• Photosmart HP 6510 will only print black light gray text

  Any suggestions on how to solve this problem.  Been thro all the habit change the cartridges, clean the heads (several times), align the cartridges.

  Problem started after the low ink warning and then change cartridges.

  Need to BEST print mode to get the light gray black text only printer and printing grayscale value must be set to OFF, otherwise no visible impression is reached.

  Colurs look OK on the Test print but once again no sharp black, light not gray see the upward.

  Help please!

  Hi SportBilly15,

  Welcome to the HP Support forums.   I understand that your Photosmart 6510 is not printing black ink properly.

  I've included the document setting the streaks of ink, faded prints and other common print quality problems . It takes you through several steps to correct the problem of troubleshooting.

• I have a HP Officejet used that only prints black

  Hello! I recently bought a HP Officejet 4500 used. I use it as a printer with my MacBook Pro version 10.9.3 and it will only print black. I have combed all through information from print and can't find where to change the settings to print in color or black. Also, how can I connect it via Ethernet? Thank you!

  The Officejet being able to print colors without problems when compared with the computer, we have a path take it now. Try to reset the system of printing on Mac, this will delete the printer drivers, when return adding that it will be the default settings. Mac OS x: how to reset the printing system will guide you if you have not done this before.

  Now that the printer drivers are deleted, repair disk permissions on the computer. Download and install this: v.2.16.1 for OS X HP printer drivers and add your printer. There should be no reason why the printer would not print color of the computer.

• HP Deskjet 1000 printer - just changed the black cartridge for the first time and now it will only print first half of the page. Can anyone help

  HP Deskjet 1000 printer - just changed the black cartridge for the first time and now it will only print first half of the page.  Can anyone help

  Hello Gloria,.

  I ask you to execute methods in the following link and check if the problem is resolved.

  Solve printer problems

  You can also contact the manufacturer to find out how to clean the print head.

  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en

  Please get back to us with the State of the question.

• Printer HP Photosmart will not print black

  Printer does not print black.  New cartridge, vent open, rebooted, powered turn off/on. etc.  Will be no copy/print or computer/print.  Commercial ran.  Will only print colours - not black.  Need advice.

  Hi robin

  I hope that we can get you back to print.

  You have a c310 PS, right? Have you tried the usual things like

  -check ink levels

  -running a clean print head

  -verification of the cartridge is properly ventilated

  If so, then soaking the printhead suggested by Bob Headrick might work. Otherwise, you could buy a new printhead at shop part of HP (because I assume that your printer is now out of warranty?)

  The part No. you will need to pick up at the store is CN642A. The link is below ("buy a new online')

  http://support.HP.com/us-en/document/c02914910

  Hope this helps

  Ciara

• 5512: 5512 printer will not print black - 3 of all colors print correctly

  Hello

  The 5512 will not print black.  New cartridge installed.  Clean print head run more than 5 times without problem.  There was many 5512 'no black printing problem' not noticed on this forum with many courses of resolution.  I followed the instructions found on so many comments, but unfortunitely, the problem still exist.  I noticed there were some done private view so I don't know that there is a similar problem that needs to be processed offline.  Thanks in advance for any help provided.

  Thank you all for the suggestions.

  Nothing has worked for don't solve the "no black ink.

  So, I took the print head of cart and carefully protected the small circuit board on the back side.  There is a large accumulation of ink on the bottom of the Assembly.  I sat the nozzles at the bottom of the distribution of very hot water and allowed some time to soak.  From there on, I used carefully some fabric material and q-tips to wipe the nozzles.  Then I got very hot water, and he ran to the top of the side of the Assembly to the screens and through the nozzles.  This effort lead to a very large discharge of ink black and color.  I dried the Assembly and reassembled the transport to the printer.  Placed all the cartridges back in, ran clean printhead once and then guess what? the printer now prints black and color inks better than he has in years.

  Total time needed to perform this cleanup was less than 30 minutes from start to finish.

  Good luck to all of you who have this problem.

  Before the rampage of the printer, it is interesting to try this fix.

  Good luck!

• I have a Kodak esp3.2 printer... I am trying to print a receipt... printer will only print the title

  My question pretty well summarizes my problem... printer will be only to print the topic... rest of the page is blank... This receipt is necessary in case I need to return the product. Wal-Mart has suggested printing the receipt... so whats up don't you assume? as I said before, I'd really appreciate any suggestions... RL

  Moved from feedback

  Original title: I have a Kodak esp3.2printer... I am trying to print a receipt of my computer... printer will only print the title... help! enjoy suggestions... RL Herrin

  You will need to contact Kodak support.

• My Officejet 6500 E709 all in one will not print black.

  My HP Officejet 6500 E709n all-in-one will not print black.   All other colors work very well.  Have you tried what follows - new black cartridge installed, ran the print heads clean utility, made sure the wind was compatible black ink cartridge, turned printer off and restarted.  Print tests still not print black - other colors and images to print, but not text black or shades of black in images.  Any suggestions on how to fix or what needs to be repaired?  Thank you.

  Hi jim: I just had the same problem a few minutes ago. After having gone through all the troubleshooting steps, I realized it was all just a bad cartridge. The PIN on the printer heads were not reading the new cartridge, so nothing in black print could be printed. I installed a new black cartridge and I could resume my printing projects. I then contacted the HP store directly to report the faulty cartridge while they could send me a new, that I won't be out of pocket for a cartridge I bought directly from them.

  Hope this helps you with your problem.

• Got paper stuck in the printer and now will only print proofs. How to reset the printer

  Got paper stuck in the printer and now will only print proofs. How to reset the printer

  It looks like you may have some saved jobs in your queue that need to be removed.

  Here's how:

  To clear the print queue, stop the print spooler service and delete all the jobs/print pending.
     
  You cannot delete all print jobs in the queue so that the Print Spooler Service is running.
        
  To stop the Print Spooler Service, click Start, run and enter in the box:
         
  services.msc
         
  Click OK to open the Services Applet.
         
  Locate the Print Spooler Service, right click and choose 'Properties' and then click on the "Stop" button to stop the Print Spooler Service is running.
     
  The option "Startup Type" of Service properties print spooler is usually set to "Automatic" (which is now a good time to check it out).
     
  If the "Startup type" is not set to "Automatic", set the "Startup type" to "Automatic" If that is your desire (which now is the time to check it out).

  Do not try to start or restart the Print Spooler Service immediately.  You must remove all print jobs backed up first...
     
  Then, delete all updates pending upward and forward to printing from XP.  If they do not print before, you will need to send the to the printer again.
     
  Using Windows Explorer, navigate to the following folder (assuming that Windows is installed on your C drive):
     
  C:\WINDOWS\system32\spool\PRINTERS
         
  Delete all the print jobs in queue (select and delete all the files) in the folder if the folder is without waiting for print jobs.  The folder must be empty when you are finished.
         
  Reboot your system and check the Print Spooler Service again to make sure the Print Spooler Service restarts automatically restart (given that the startup type is set to automatic).
     
  After the reboot, check again the Spooler Service for printing and the 'Status' column for the print spooler must be read "started."

  Submit new failure of print jobs.

• I can't get the labels to print an entire page of the same label he will only print four. Help

  I try to print a full page of labels, all the same. I did in the past, but now it will only print 4. How can I get to print an entire page?

  Thank you for your help.

  Hello

  1. What is the brand and model of your printer?

  2. what applications printer do you use?

  I suggest you to change the print settings and check if the problem persists:

  Reference: To set the properties of the printer

  Hope the helps of information.

• On the web why is vacuum print-preview and will only print headers and footers?

  On the web why is vacuum print-preview and will only print headers and footers?

  Hi BARRYSPAULDING,
   
  -What is the browser you are using?
   
  -If it is Internet Explorer, what version of IE are you using?
   
  -Is this issue occurs with any of the Web pages that you print? Or is it specific while trying to print from a particular Web page?
   
  If you use Internet Explorer version 7 or 8, steps in the link below will help you solve the problem:
   
  You cannot print or print preview Web pages in Internet Explorer on Windows Vista or Windows 7
   
  Note: The steps in the link are also well worth for Windows XP.
   
  Check "C:\Documents and Settings\\AppData\Local\Temp\Low" folder under Windows XP against "C:\Users\\AppData\Local\Temp\Low" for Windows Vista or Windows 7

• Re: HP Deskjet 3520 - will not print black text

  Re: HP Deskjet 3520 - will not print black text

  so frustrating piece [language edited by moderator]

  Hi @Jaaanosik

  Please use the following document to solve the problem. Printer cannot print black ink or color ink, or prints blank Pages.

  If the problem persists, I would call you HP regardless of your warranty status. The number of call HP is 1-800-474-6836 for the Canada and the United States, or you can Contact HP worldwide.

• HP LaserJet Pro CM1415: Printer will only print a single document. Bloggy queue and I need to restart the computer to print

  Printer will only print a single document. Bloggy queue and I have to restart my computer to print more than a single and repeat for each print job... very annoying. She's been doing this for printing the PDF, chrome, Word document, etc.

  Hello.

  Please, try the suggestions you find here:

  http://support.HP.com/us-en/document/c022054777

  Dovid

• Smart photo more B 210: Photo Smart Plus B will not print black

  My Photosmart B210 printer will not print black.  Changed cartridge, and all the other colors work.  Is there a place it could be 'blocked '?

  Hi @Ryegal,

  Welcome to the HP Forums!

  I see that your HP Photosmart b210 will not print in black. I'm happy to help you with this problem of print quality!

  Please consult this guide, printer prints blank Page or doesn't print black or color ink for the HP Photosmart Plus e-all-in-one (B210a, B210b, B210c and B210e) printers.

  If the guide does not solve your problem, please call our hotline at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Good luck!