Load a gif of the BlackBerry disc

Similar Questions

• Purple screen United immediately after ESXi 5 loading bar when starting the installation disc.

  I have a client that is running ESX 4.0 on a compatible with ESXi 5 host.  When I went to upgrade the host to ESXi 5 I ran into a problem, I have never seen elsewhere.  I started on the disk and screen with the status bar at the top is fine.  Immediately after loading, before showing always the yellow background or license agreement, he throws a Uni purple screen and without words.  If you leave it for about 20 seconds, then the screen goes black with gray blocks randomly everywhere.  I tried with another download and CD but I get the same results.  I couldn't find anything on purple screens without the current text.  Any help would be greatly appreciated!

  Did you check if the version of the BIOS of the host must be updated in order to run ESXi 5.0?

  André

• When I load a piece, or the movie disc wmp does not play automatically. It was, how do I get that back

  WMP does not play automatically when a disc is inserted. How to bring back this feature

  Hi billsinor,

  1. did you of recent changes on the computer?

  2. what happens when you insert a disc in the drive?

  See the Microsoft article below and try the steps mentioned, check if it helps.

  The Autorun feature or the AutoPlay feature does not work when you insert a CD-ROM into the CD drive

  http://support.Microsoft.com/kb/330135

• I can not get windows to load.i have made the recovery discs, but cannot get to work. How can I make this .thanks

  When I turn on the computer, it goes to a blue screen and stops there.

  If you have performed according to instructions of the manufacturer of the computer Vista recovery disc and you encounter problems by encouraging them to work, you must contact the manufacturer of the computer for help.

  This isn't their recovery process, Microsoft.

  See you soon. Mick Murphy - Microsoft partner

• BlackBerry Smartphones do - what do I do when the blackberry starts to load, but then the screen turns white

  A couple of weeks, I have recharge my phone and he kept on his auto turn off or not charging well so when I rang Virgin they told me to buy a new battery I did, I loaded the new battery in another phone blackberry by following the instructions at and when I got the new battery for my blackberry torch It started to load as usual but the screen turned white and it turn off its self.

  You need to ring up Virgin again and explain to them that it was not the battery because of your questions.  It is for them to take in charge your device and, as appropriate, to support RIM to get is resolved.

• My "BOLD" of blackBerry Smartphones is turned off as soon as the loading page less reaches the quarter

  Hello, I woke up this morning and my phone was working fine. I am back asleep and woke up it was off and everytime I try to turn it on I see the red light and then it starts to load until it reaches the quarter or even less, and it shuts off and restarts with the red light and the loading page... etc. What should I do? I mean my phones not died and I bought a new battery for it, so the problem is not the battery

  If your BlackBerry is still under tension turned off with a black screen, or constantly restarts, follow the instructions below. The only indication of life may be the flashing red indicator light in the upper corner. Nothing seems to wake and Desktop Manager does not recognize that a device is connected.

  (1) make sure that you have Blackberry Desktop Manager installed.
  http://NA.BlackBerry.com/eng/services/desktop/
  (2) on your PC, go to start > run and copy and paste the following line exactly (i.e. with quotation marks):

  'c:\program files\common research in motion\apploader\loader.exe' /nojvm

  (3) the Application Loader Wizard will appear - click on "next".
  (4) in the ' connection: ' drop-down menu, you should see "USB - PIN: UNKNOWN". Click on the button "next".
  (5) you should see a list of applications ready to be installed for your Blackberry. Press Next and finish, and that you are well on your way to get your Blackberry to life. Just unplug and let the process finish completely.

  NOTE: If you do not display the list of applications mentioned in step 5 and instead to see the message "the Blackberry Desktop Software has no Blackberry Device Software for the device you have connected to the computer. Contact your wireless service provider or system administrator', then you must download the Blackberry operating system for your support and your device.
  http://www.BlackBerryFAQ.com/index.php/BlackBerry_Operating_System_Downloads
  Just select the appropriate type of carrier and network, select your Blackberry model from the list and download the latest version. Install this download and follow the steps above again and you should be on the right track.

• How can I activate Director 11?  D11 I loaded on my MAC from a disc.  In the activation window, the ups and downs of the choice of activation are cut.  The choice of the internet is enabled, but the window says"Activation"-no link. "  But I am conn

  How can I activate Director 11?  D11 I loaded on my MAC from a disc.  In the activation window, the ups and downs of the choice of activation are cut.  The choice of the internet is enabled, but the window says"Activation"-no link. "  But I'm connected to the internet.  The phone option is not available.  When I call Adobe directly, phone mail says that the Director is not supported.  Suggestions?

  Moving to the Director

• When I down loaded Lightroom 6 of the disc is not remove or cover on my older Lightroom.

  When I down loaded Lightroom 6 of the disc is not remove or cover on my older Lightroom.

  Each version is independent, then a new installation of version is SUPPOSED to overwrite or replace an old version

• Due to the update of my OS, I lost my program. I tried to load the original disc, but the installer asked for a serial number and the serial number only I have is the 24-digit number which didn't work. How can I activate my copy of CS4?

  I lost my Photoshop CS4 due an update of my OS. I used the original disc to load the program. I used my digit S/N (24), but then the installation program asked my serial number, which I did not. How can I get my CS4 activated? Thank you.

  You can try the option Chat here:

  Contact the customer service

• The installer disc will not load?

  When I insert the installation disc in my iMac, it stays (no load) for 10-15 seconds, then auto-éjecte. The first time this happened, I assumed it was a bad drive and got a replacement. However, it happens with the replacement drive as well. I installed other software by disk successfully, recently, including an upgrade to Photoshop and does not know why the computer keeps rejecting Lightroom.

  I tried to reboot in safe boot mode and same thing.

  Any ideas how to get my computer accepts the CD so I can install the program? Thank you!

  Write the truth wrote:

  The trial version is not the full version. I know I downloaded it yesterday and it is 67MB. The full version is 198MB and I know because I planned to buy it after trying the demo version of LR 2. This was also confirmed by a salesperson at Adobe.

  Danis has it right. The trial is the full version. Try to delete the prefs file. pointers to it are in the FAQ. See resolve system errors or freezes in Photoshop Lightroom and Photoshop Lightroom 'Préférences' and ' database/catalogue'?.

  Don

• loading of GIF or SVG animations

  I'm trying to put a load on my widget animation but not having a chance.

  First, I created a small gif and placed it in my widget. The picture showed, but it was not animated.

  Then, I loaded my gif in composer and converted into a SVG. I added the svg to my project of widget, but I can't even see it.

  Anyone care to share the use of one of these correctly in a widget? I can't get there this morning.

  I found a solution

  See my post in the tips & tricks Sticky found here:

  http://supportforums.BlackBerry.com/T5/Web-development/tips-quirks-and-solutions/TD-p/470870/HIGHLIG...

• Web pages sometimes loading as GIFs without reason

  Hello

  For some weird reason, some Web pages that I have access that do not have images or GIF files on load on Firefox in the form of empty GIF images which means I can't access the Web page that I chose to go.

  Thank you

  Some firewalls like Kaspersky can block content and send a GIF 1 x 1 instead.
  Kaspersky: Protection > firewall > Filtration System: disable the banner "Ad Blocker".

• Equium A100 - unable to boot from the bootable disc

  Equium A100-549

  My son s partner has a 2 year old Toshiba which has become slow over time. I had done a backup of the system with office installed etc using Acronis. Anyway, decided to rid running Acronis and recorded image. The program runs normally, and he falls down to a denial of service as the ready to restore screen. It is then with the cursor flashing as usual and then it crashes, and doesn't allow you to access the image.

  I am that it can be altered, so reinstalled Acronis. Make an Acronis boot disk to run the image, and he does not take into account the disk boots directly to the normal hard drive (IDE 0) still no joy. Then I tried the restore of laptops disc. In the BIOS, I said peripheral CD as everything first and also the restore disc says place in the drive and turn off.

  While it starts up press F12, which brings a menu allowing you to boot from the CD drive. I did, but it doesn t appear to look at the CD and just load windows from the HARD drive. I removed the CD for system devices and rebooted. He found and added the new device to herself and asked to reset. Still no joy!

  Scanned with Norton, but still not good. Norton removal. The result is the same. Able to read the CD and also write to it as well. Diagnosis Toshibas ran on the unit and everything seems ok with it.

  Tried to make a bootable flash stick on floppy, but it is ignored, well specified the amorçage using other devices.
  Basically, it seems that I can t get it to watch prior CD onto the HARD drive.

  Flashing the BIOS would heal it? -Registry error causes this?

  Y at - it everywhere where I can talk to someone from Toshiba about this?

  Any info / help much appreciated

  Hello Nick

  Put the delivered device DVD recovery DVD and turn on the laptop. Press the C button and keep it pressed for a few seconds. This will force the DVD player to read the DVD, and I hope that you will be able to use the DVD of recovery for the installation of the OS.

  If possible, test it with some other bootable CD installations. Please post the results.

• Windows 7 does not recognize the installation discs

  Hello

  I have a problem, and I don't know if there is a solution, but here goes.

  My laptop is a HP DV6-7029WM Windows 7, 64 bit.

  The hard drive was dead, and he was replaced last month.  I sent it to HP.  C is the hard drive, and was originally the recovery on D. Removable media were on E, and when I connected a USB stick or memory card reader it would on F.

  When I came back, hard drive was on C as it was originally, and there was no recovery drive D. D is now my removable media drive. When I put in a USB stick or a memory card reader, which is now on the E drive.

  After I bought this, I put the recovery on a USB key, but I've accidentally thrown out. (My mistake) So I ordered the installation diskettes after that I return my HP PC.  I had 2 DVD system recovery disks and an Application and a recovery DVD Drivery.

  I want to reinstall Windows back to the default settings. I put disc 1 (System Recovery DVD) and close.  I reboot and it goes directly to the office. I hear the whirring disc, but nothing happens.

  I go to the control panel > Recovery > advanced retrieval methods. I click on restart, and it loads files and then says DVD set, which I do. He told me that he does not recognize the installation disc.

  I googled this problem and found a poster on CNET that had the same problem as I do. Also, I can't do a system restore.  My problem is the same as this poster on CNET.  I can read DVDs and CDs.  Those that work very well.

  http://forums.CNET.com/7723-19411_102-568059/Windows-7-installation-disc-not-recognized/

  The files are on the DVD, because I see them.

  I don't know what to do. Should I send my PC back? Can I do to solve this problem?

  Thanks in advance.

  pen

  Hello:

  With recovery disc 1 into the DVD drive, restart the computer and at the beginning of the HP welcome screen, press the ESC key to display a menu of options.

  Select the F9 boot menu option.

  Select the DVD drive on the list of bootable devices, and press the Enter key.

  Watch the screen for additional instructions.

• computer is spit back out dvd but will keep and play the game disc

  have a dell studio, he started being silly, it will read and play the game disc. partially, it reads the disks if recording information. but it wen I put it in a dvd takes it turns around inside like its gona read but it spits out back. IV run virous scans and updates and I cheak all system files and every thing seems OK Please help

  Hello

  Check with Dell Support, their online documentation, drivers, diagnostics and ask in their forums
  on the problems known.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  ----------------

  Having too many CD/DVD programs can cause strange problems, especially if they're loading of parts of
  themselves at the start because they will be competing for resources. This does not mean that this issue has been
  caused by those, however, it's a possibility depending on which and how many you have installed.

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  -------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">