"Load driver" error when installing Win7 on Satellite C665

Similar Questions

• Need advice for installing Win7 on Satellite A300

  Hello

  I intend to buy Satellite A300-1MT (PSAGCE), and before I do I just check if there are still some problems with drivers for W7 for this model?
  On other forums, I saw that there are some problems with drivers like music keys, webcam, touchpad and FN keys and so on...

  So, can someone confirm me that all drivers are now available and everything works?

  And also until I started installing drivers is there anything I need to know (wait used?) Or perhaps better: does anyone have a special notice?

  Please, find the will to respond! Thank you very much!

  Hello

  I have the Satellite A300 running Win7 32 bit, but my model is PSAG8E.
  To be honest I have very good experience with installing Win7 on Satellite A300 and I can recommend you to install on this Satellite.

  If you visit the Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads you will see that your laptop model is supported Win7 and it shouldn't be problem to install all the necessary drivers and other stuff of Toshiba.

  Here is the list how I did this exactly:
  atellite A300 (PSAG8E) and clean Win7

  -Win7
  -chipset driver
  -Storage Manager
  -display driver
  -driver sound
  -modem driver
  -utility supervisor
  -infrared
  -patches 1.2
  -configfree
  -VAP
  Hardware - toshiba
  Control - HDMI
  -WLAN driver

  Everything works well but lacks some drivers

  Added Vista tips:
  Toshiba - help - working properly
  -Card reader - installed correctly
  -Webcam driver for A500 - tested with Skype - works correctly.
  Driver - Synaptics

  Win7 works well and I am very satisfied. No problems with the feature keys FN.

  If you are going to buy this laptop start installation Win7 following this order of installations. Please inform us of problems and I hope that we can help you about this.

• How to solve (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) error when installing on Windows Server 2008 R2 COM component

  How to solve (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) error when installing on Windows Server 2008 R2 COM component

  Please repost your request in one of the appropriate Forums for Windows Server.  Thank you!

• 302 error when installing my wireless router

  302 error when installing my wireless router

  Wireless routers are generally not required to be "installed", so please explain exactly what steps you follow, and when the error message appears.

  Be sure to include:

  • Full text of the error message, without paraphrasing.
  • Brand and model of wireless router.
  • Windows version, including service pack (start > run > winver > OK).

• Blue screen when installing Win7-32 on 7.14 workstation (linuxhost)

  Hello!

  I installed VMWorkstation 7.14 (VMware-Workstation-Full - 7.1.4 - 385536.i386) on ubuntu 11.04 (32 bit, 2.6.38 - 11-generic-pae, ubuntu gnome classic) and you try to install a virtual machine the ultimate win7-32.

  When installing win7 - Setup stops with a blue screen, MEMORY_MANAGEMENT STOP: 0x0000001A.

  I tried different DVD Win7, but breaks up with the BSOD all the time installation and already checked the laptop computers (Lenovo Thinkpad x 201 (5413-FFG) 8 GB of RAM, they seem to be fine.)

  Also installed WinXP-SP3 without any problems in a virtual machine...

  No reference to what has gone wrong?

  Kind regards

  BigMac

  view the vmware.log which was created during this installation attempt

  affect you very little or too much RAM?

• On the tray upward. error when installing the shared technologies. Then it cancels the installation.

  On the tray upward. error when installing the shared technologies. Then it cancels the installation. Download, installation, setting up

  Photoshop elements 12 fails when installing sh... | Adobe community

• A12E5 error when installing creative cloud for the premium from adobe flashbuilder 4.7 version

  A12E5 error when installing creative cloud for the premium from adobe flashbuilder 4.7 version. Please provide the solution to install the software. I have the license keys to install it.

  Hi rkcy100

  Please visit: http://forums.adobe.com/message/4562902

  http://forums.Adobe.com/message/4811565

• Satellite L500 (PSLS0E) - HARD drive not found when installing Win7

  Hello!

  I wanted to install a new Windows 7 (without recovery), but the hard drive was not found during installation. In the start instead menu I can find the drive. So what I need is a driver. But I have no idea where to get one! Can anyone help?

  Version: PSLS0E-06T01KGR

  THX

  Now maybe stupid question but are you using the original installation disk Microsoft Win7?

  I installed Win7 on several different Toshiba laptops (old and new) and HARD drive was visible every time. I deleted existing partitions, created a new and correctly installed Win7 on it.

• How to install Win7 on Satellite C870-190?

  Hi, I hope I'm posting in the category right forum then...

  My laptop is Toshiba Satellite C870-190 and it doesn t want to start my windows 7 CD.
  I tried first with the DEL-button that opened the system startup when I start Notepad and then choose the CD-ROM device and do not want to load the CD and then I chose F2, the first unit on the boot to the CD-ROM section, still do not want to load it... the final solution, I tried to install it from the Windows 8 (current operating system) from my computer--> CD--> setup.exe, and then click INSTALL.

  My computer laptop doesn t have allowed me to install it even from Windows... on file copy screen to say... and then it gives me an error that says that the operation failed... What is happening with this laptop?

  How can I format my HARD drive and then install windows 7?

  Thank you

  At the beginning I will say that I hope that you have created a recovery media (DVD or USB) before you have begun to install Win7.

  Return to your Win7 installation. A long time ago I installed Win7 on friends U940 and the first stage was changing course startup in the BIOS settings mode - http://aps2.toshiba-tro.de/kb0/TSB2C03F80002R01.htm
  After the installation Win7 has started successfully, but in my case the SATA driver support was necessary.

  Please check first and send comments.

• 0x000000c1 error when installing the printer

  Original title: OS-Included HP Printer Driver does not install

  I recently had to reinstall my Windows 7 computer due to a hard drive failure, and on this new installation of my printer driver will not install.  Nothing has changed in the physical environment, and the software environment is essentially the same as the previous installation.  When it is plugged in, the ball "new hardware found" appears and then is replaced by 'driver have not installed ".  If I go into the properties of the device, the driver information tab, it says that no driver is installed. Press update driver, search windows update, download a driver, try to install and fails.  Printer comes with a yellow triangle throughout this process.  I got an error 0x0000000c1 (not sure of how many zero in there) several times, trying to force installation of the driver. Any attempt to interact with the printer stops the entire print spooler service.  The printer is a HP Deskjet 6540 and uses the oem7.inf driver file.  Two other printers (both brands Canon) are connected by network and their drivers installed without problem.

  HP support site is useless, as it just says: "install the supplied driver OS." And said nothing else.  I also saw on other forums that the 0x00... 00C 1 error indicates a corrupt driver file, but I forced winupdate to download a new driver and install it, and it still does not work.

  Any help is appreciated.

  Stats: Fully patched Win7 Home premium
  Intel Core i7, 6 GB ram, 64-bit system

  ANSWER well, workaround.  Thanks to a guy randomly in HP forums:

  For all those who felt fossoyées by the driver windows 7 for hp deskjet 6540 printer I went manual Add a printer and used a model in the 6900 Series. It will not solve the problem since you will lose some functions anyway because you do not have an official update from hp (please hp if you're here, nowhere do us justice). It is a very good printer and mine is more or less like new since 2004.

• Error when installing Windows 10

  Hello

  When installing windows 10, it's show error 8007002.

  I deleted temporary files, but its still the same error showing.

  Help, please

  80240020 8007002C 80246007

  1. navigate until "C:\Windows\SoftwareDistribution\Download" and delete the contents of the folder. 2. press on the Windows key + X > click (Admin) command prompt and then type "wuauclt.exe /updatenow. Press enter 3. open Control Panel > Windows Update and Windows 10 should begin to download...

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times and try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Do a clean boot, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both and try the installation again.
  • If you update via Windows Update, when download reaches 100%, disconnect the Internet LAN (Ethernet) or wireless, and proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

    How to: upgrade previous versions of Windows using the file ISO for Windows 10

    How to download official Windows 10 ISO files

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

• Installing Win7 on Satellite P50T-B-108

  Hello!

  I want to change my current Windows 8.1 for Windows 7 operating system, but I have a lot of problems to deal with, because of the UEFI boot system.

  I already changed the boot manager of UEFI to CMS (compatible BIOS Boot Manager) and I tried to install Windows 7 Ultimate x 64 as usual by booting from the CD.

  But if I come to the sequence where I have to choose on which drive I would install it, not work in car because of the GPT Partition of the hard drive.

  I also tried to install it via VHD, but he also didn't work.

  I hope someone can help me!
  Thank you
  Lukas

  Toshiba Satellite P50 - T B108

  A question before continuing to discuss: I checked the Toshiba download page-http://www.toshiba.eu/innovation/download_drivers_bios.jsp and this laptop model is not supported for Win7.

  Where you find drivers, tools and utilities for it?
  By the way: you created before recovery media you have begun to change anything?

• NB550D - error when installing Bluetooth

  I installed Windows 7 64 bit on my NB550; the only missing part is battery bluetooth.
  During the installation of coating it of "BT-stack-64 bit - toshiba.zip ' (is of the toshiba Download Center), he's looking for a 'Toshiba RFBUS; pilot' as it is not able to find, the installation fails, and bluetooth driver are not loaded.

  The result is RFBUS & RFCOMM bluetooth driver error in info sytem, with no possibility to use bluetooth.

  Any suggestion on this?

  Hi Fapor,

  Now you see all conflicts in Device Manager?
  Have you tried installing BT once more?

  I would recommend this doing. New battery BT + driver can be downloaded from the portal official Bluetooth site:
  http://APS2.toshiba-tro.de/Bluetooth/

  But before starting with the installation, make sure that you have removed the old version first ;)

• Installing Win7 on Satellite M70-173 - query of wireless internet

  Hello

  I have a Toshiba Satellite M70-173, which I think to be up-to-date with windows 7. However after you run the windows 7 Advisor, he told me to download the driver of the wireless device that is:

  Intel (R) PRO/Wireless 2200BG Network Connection

  I put t really know what it is? Is my wireless 'card '?
  In any case, I check on the Intel site for the updated drivers for win7, and he says:

  "Intel® PRO/Wireless 2200BG Network Connection does not support Microsoft Windows * 7.

  Intel® PRO/Wireless 2200BG Network Connection is no longer manufactured by Intel, nor Intel provide any future software updates to support new operating systems or improve compatibility with devices and third-party software products. "

  Does this mean that I should not install Windows 7?

  How can I work around this problem, do need me to upgrade and how much would this cost?
  Thank you

  Satellite or Equium M70 is old model of laptop computer designed for Windows XP Home edition, so it is certainly not taken in charge for Win7. It is certainly possible to install Win7 on this laptop, but you will not be able to make it work with all the options that are specific to Toshiba.

  Yes it's the wireless card if this card doesn t work for lack of best drivers and the best option for you is to buy the wireless USB dongle. Ask your dealer how local it costs. As far as I know that's not expensive.

• No driver error when you include traditional DAQ in the Kit of Distribution CVI 9.0

  I have a legacy code (CVI 6.0) that I wanted to update recently.  The main reason was the ability to add the device drivers for the distribution kit.  When I installed the software on a new machine, I had a driver number error when you make a call to CounterStart.  In the past that error means that I had not included support CVI when I installed traditional DAQ.  Since that it has been installed as part of a kit of distribution that I do not see what elements have been installed.  I guess that since it was listed in the framework if a distribution of CVI kit that support the CVI is automatically.  How can I get rid of not the pilot error?

  Thank you

  CP

  Hello

  Unfortuantely, there is no way to have included in a CVI tDaq generate setup with the support of the CVI.  R & D is aware of the issue.  For now, the solution is to modify the installation of tDaq and add support for the CVI.

  For more information, please see this KB.