load files on an sd card

Similar Questions

• Homegroup is very slow. Loading files from another computer is very long and I can't watch movies on the wireless using the homegroup.

  Group residential slow and other problems with it

  Hello!

  I have 3 Windows 7 PC-s (office #1, #2 desktop and laptop). I created HomeGroup and join all computers, so I can access the files on each of them. But my problem is the following: homegroup is very slow. Loading files from another computer is very long and I can't watch movies on the wireless using homegroup, because it is slow and every two seconds of loading film. And also needed a few minutes to open the pictures (more than 10 GB in all folders) to a folder in the other PC. Why is this work so slow? I don't think there is a problem with slow wireless router, because I can replace my old Linksys WRT54GL Linksys E4200, which is able to transfer video HD 3D such as Linksys provide. What should I do to fix this? Should I change all the settings in Windows, perhaps in the router...?

  And why my laptop is not always visible to the other PC to homegroup? He see two others and two other sees, but they are not portable. This happens sometimes. But then I still share with homegroup libraries to my laptop and there still other computers see it and all shared libraries. Where is the problem? I also try to change the HomeGroup services automatically, but this does not solve the problem.

  If I forgot something to write, or you need more information, do not hesitate to ask.

  I'd appreciate any help really.

  Hello

  Manually check manufacturers sites WiFi because pilots offered through
  Updates Windows will most often not be later (MS is far behind certifying)
  drivers and many manufacturers do not quickly submit newer versions or not at all). See
  Manual driver update of the methods below.

  The question could be WiFi in fact however try to device (hardware)
  update the driver first.

  What antivirus/security is used? Some of those who will cause problems with the
  Homegroup. Since it happens more often on a single computer that on there
  a check.

  From this link:

  Homegroup: frequently asked questions (also shows how delete and remove homegroup)
  http://Windows.Microsoft.com/en-us/Windows7/HomeGroup-frequently-asked-questions

  "Only people who belong to the homegroup can see shared libraries. You can also share libraries or files and individual folders with specific people in your homegroup, rather than share them with everyone. For more information, see libraries with your homegroup sharing and keep files and folders to be shared with a specific residential group. »

  Share files with anyone
  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  ==================

  How to upgrade manually the drivers:

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods
  below is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
  found)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
  (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as windows
  7 love the updated drivers.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• can I import files from an SD card mts in Imovie

  Hello

  I'm looking for a good application, easy and cheap for my mac.

  To edit video files and create a mp4 file.

  I get cards sd with the MTS files and you want an application that can import directly.

  I can't find any information if the latest version of Imovie supports importing MTS files from an SD card.

  Someone on this forum can help me?

  Or do you know a good alternative for Imovie import STDs, edit video, use the features of simple enchancing and export to mp4.

  We hope to get a response.

  Conrad

  The Netherlands

  .mts files are produced by recording AVCHD cameras.  It is generally recommended to import from a full set of AVCHD (camera, SD card or copy of SD card) but the latest version of iMovie also allows drag-and - drop files individual .mts directly into iMovie or the project timeline event.

  Geoff.

• Problems importing the files from an SD card to iMovie

  After I have import files from an SD card to version 10.1.1 iMovie I have a problem when I eject the SD card then some of the files show just like a question mark (?) and some of the files are saved. I've never had this happen before that I can remember. I was just curious to know if maybe I do some thing wrong, or if there is a problem with iMovie.

  ! 0.11.4 OSX El Capitan.

  iMac late 2012

  Looks like you may have ejected from the SD card until all files have been copied to iMovie.  In fact I never use import to all but drag and drop files directly from the SD card mounted to an iMovie event.  This way an id that the files were transferred.

  Geoff.

• Windows is loading files...

  This has happened to me for a while now.

  I start the computer, if I forced mode it asks if I want to get into the Safe Mode, Mode safe mode with networking or normally.
  I usually go on the network in safe mode, because of the error on blue screen on Normal I have to fix ABC.
  He says "Windows is loading files", does microsoft thingy loading then the screen becomes larger, as if it was in safe mode, but it will start up repair.

  ... Research of the problems... Windows cannot repair this computer automatically... For the 40th time. "If you have recently attached a device to this computer, such as a camera or music mobile game -" Hey... I just want to play Xbox Live.

  I'm done, it restarts and repeats continuously.
  I tried all the stuff the other forums effing threw on me, but they were not much help.

  It's the Toshiba forums, I should have here tried everything first... but can someone PLEASE help me?

  Hello

  Using Win 7?
  Usually the Win 7 and Vista as well supports some repair options.
  Start Notepad, press F8, and then choose the first option called fix my computer.
  There you should find some settings of repair.

  I worst case you could recover the laptop using a HARD drive recovery option (located in the repair of my computer if available) or you can use your Toshiba Recovery disk to reinstall the operating system.

  Welcome them

• Re: Where can I find files on my SD card?

  When I insert my SD card, I don't know where on the computer, I open the files stored on the card.
  Watching on my computer but it does not save my memory card, I find another place?

  Thank you

  Kerry

  Usually, if the SD card is inserted, the message in the to-do bar should appear and you should see the SD card in my computer

  So here are a few questions:
  You use the compatible SD card format?
  Have you tried reinstalling the driver from SD card?
  ID of the SD card properly recognized in Device Manager?

  Check it!

• Could not load file or assembly ' NationalInstruments.VisaNS, Version = 8.9.20.108

  I have an app VS c# that references the assembly OR world.  It worked fine in 32-bit Windows XP environment.  However, when I installed and ran the application in the Windows 7 64-bit environment.  The app was the following text:

  System.IO.FileNotFoundException: Could not load file or assembly 'NationalInstruments.VisaNS, Version = 8.9.20.108, Culture = neutral, PublicKeyToken = 4544464cdeaab541' or one of its dependencies. The system cannot find the specified file.
  "File name: ' NationalInstruments.VisaNS, Version = 8.9.20.108, Culture = neutral, PublicKeyToken = 4544464cdeaab541"

  Where can I find this assembly file version and why did not he ask you when I ran into the Windows XP 32-bit platform?  It's the same application binary.

  Thanks for your help!

  Another reason, you can get this error if you have your target, the value 'Any CPU' platform in the project properties. "Any CPU" setting causes the application runs in 32-bit on a 32-bit system and 64-bit on a 64 bit system mode. It would be a problem or a 64-bit system because you don't have the 64-bit installed assemblies and a 64-bit application cannot load a 32-bit assembly. You must change this setting to 'x 86' which will force to run in 32-bit mode on 32-bit and 64-bit systems.

• How can I fix error with package installed: "could not load file or assembly ' NationalInstruments.Daqmx.dll

  I'm fighting this problem for days (euphemism)...

  I used to work, but now isn't an installation package.  I tried to install and run the program on a couple of computers and the program hangs when loading the Dll NI.  I put everything ' x 86.

  The list of dependencies in VS2010 is illustrated in the attatched screenshot.

  The text of the mistake of trying to run the application on the target computer is lower in italics.

   

  Of course, I could use some help on this!  Thanks in advance.

  See the end of this message for details on the call
  just-in-time (JIT) debugging instead of this dialog box.

  The exception text *.
  System.IO.FileNotFoundException: Could not load file or assembly 'NationalInstruments.DAQmx.dll' or one of its dependencies. The specified module could not be found.
  File name: "NationalInstruments.DAQmx.dll."
  at IPClientTest.MTF_Supervisor.mainSstart13)
  at IPClientTest.MTF_Supervisor.mainStartByParts)
  at IPClientTest.MTF_Supervisor.lblSelfTest_Click (Object sender, EventArgs e)
  at System.Windows.Forms.Control.OnClick (EventArgs e)
  at System.Windows.Forms.Control.WmMouseUp (Message & m, MouseButtons, Int32 clicks button)
  at System.Windows.Forms.Control.WndProc (Message & m)
  at System.Windows.Forms.Label.WndProc (Message & m)
  at System.Windows.Forms.Control.ControlNativeWindow.OnMessage (Message & m)
  at System.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)
  at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

   

  Loading assemblies *.
  mscorlib
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.34011 built by: FX45W81RTMGDR
  Code: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
  ----------------------------------------
  MTF_Supervisor
  Assembly version: 1.0.3.3
  Win32 version: 1.0.3.03
  Code: file:///C:/mtfDebug/MTF_Supervisor.exe
  ----------------------------------------
  System.Windows.Forms
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
  Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
  ----------------------------------------
  System.Drawing
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
  Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
  ----------------------------------------
  System
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.34003 built by: FX45W81RTMGDR
  Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
  ----------------------------------------
  MTF_ClassLib
  Assembly version: 1.0.1.0
  Win32 version: 1.0.1.0
  Code: file:///C:/mtfDebug/MTF_ClassLib.DLL
  ----------------------------------------
  NationalInstruments.UI.WindowsForms
  Assembly version: 13.0.40.242
  Win32 version: 13.0.40.242
  Code: file:///C:/mtfDebug/NationalInstruments.UI.WindowsForms.DLL
  ----------------------------------------
  NationalInstruments.UI
  Assembly version: 13.0.40.242
  Win32 version: 13.0.40.242
  Code: file:///C:/mtfDebug/NationalInstruments.UI.DLL
  ----------------------------------------
  NationalInstruments.Common
  Assembly version: 13.0.40.188
  Win32 version: 13.0.40.188
  Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/NationalInstruments.Common/v4.0_13.0.40.188__dc6ad606294fc298/NationalInstruments.Common.dll
  ----------------------------------------
  System.Web
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.34009 built by: FX45W81RTMGDR
  Code: file:///C:/windows/Microsoft.Net/assembly/GAC_32/System.Web/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Web.dll
  ----------------------------------------
  System.Core
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
  Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
  ----------------------------------------
  NationalInstruments.Common.Native
  Assembly version: 13.0.40.188
  Win32 version: 13.0.40.188
  Code: file:///C:/windows/Microsoft.Net/assembly/GAC_32/NationalInstruments.Common.Native/v4.0_13.0.40.188__dc6ad606294fc298/NationalInstruments.Common.Native.dll
  ----------------------------------------
  System.Xml
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
  Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
  ----------------------------------------
  System.Design
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
  Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System.Design/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Design.dll
  ----------------------------------------
  Accessibility
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
  Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/Accessibility/v4.0_4.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
  ----------------------------------------

  Salvation Lorne.V.,.

  Exactly how you install OR DAQmx on the target computers?  Even if you include the DAQmx merge module in your version, you always need to install DAQmx on the target machine separately.

  You can also confirm that the DAQmx.dll is installed in the same directory on the development and deployment of the machines?  And you have the same version of DAQmx on both machines?

  Kind regards

• Could not load file or Assembly runtime being more recent than currently loaded run time

  I've recently upgraded to TestStand 2010 and Visual Studio 2010 TestStand 4.2.1 and Visual Studio 2008. I now get the following error in the analysis of the sequence for all calls to my .net dll.

  "Step"My_StepType"not loadable module. Could not load file or Assembly or one of its dependencies. This Assembly is built by a runtime newer than the runtime currently loaded and cannot be loaded. »

  I don't know how LONG it is. All of this worked previously. I tried to go back to the dll, but that makes no difference.

  Any ideas?

  Thank you.

  I found where this topic is discussed in detail a bit more.  It is in the TestStand reference manual that is installed with TS.  TS 2010 it's on page 5-12 and the section labeled using .NET Framework under section adapter .NET of Chapter 5 (Module adapters).

• (Dell) Windows 7 Home Prem OA: Please HELP! Windows is loading files.

  To the right,.
  Since my brother was playing around with my computer and play Minecraft, I got a screen that says: "Windows loading files. I tried almost everything, and I'm desperate. I watched a lot of things that still doesn't work. Repeativly F8 at startup, F10, F12 and nothing. The thing is, whenever I have turn the computer back on, there is no commissioning. The screen will appear just by these words: "Windows is loading files," and a white bar at the bottom. I see no symbol start like HP or DELL. I see no screen connection. I tried unplugging and reconnecting TAB, CTR, ALT, DELETE, put highlighted with arrows keys and down and clicking on ENTER. EVERYTHING. He has also been disconnected from the internet for several months and I can't use the disc slot.

  I have also all my photos, songs, videos, work, life and data on this computer. I NEED A WAY TO REPAIR THIS COMPUTER WITHOUT LOSING ALL MY STUFF! Please, please, please help!
  Thank you!

  Since your computer laptop is a Dell, I highly recommend going to Dell Community support.

  It's the HP product HP consumer support forum.

  http://en.community.Dell.com/support-forums/

• Could not load file or assembly NationalInstruments.DAQmx

  I get an error 'Could not load file or assembly NationalInstruments.DAQmx' when I put my application on another computer.  The only difference between the two computers that I can say is that one that doesn't use the 64-bit Windows version and one who does has the 32-bit version.

  DAQmx exists on the computer and I can control the acquisition of data through the Explorer measurement & cutting automation.

  Any suggestions?

  Thank you

  Garth

  I solved the error by downloading the latest version of DAQmx on computers and recompiling code using the most recent version.

• He saids load files from memory to print later in my print spooler how to get out or remove it

  my printer will not print when I services, then in this print spooler TI saids load files into memory to be printed later.how have removed that my printer can print

  Hi Jorgecajigas,

   
  1. What is the operating system installed on your computer?
  2. What is the brand and model of your printer?
  3 is enabled, the print spooler service?
  4 are you facing this problem with a particular application?
  5. you receive an error message when you try to print?
   
  You cannot change or remove the description of print spooler. The message you get in the description box is just tells you what the purpose of the service. To solve the problem on the printer does not print you can follow the steps and check if it helps.
   
  Follow the link and check if that helps.
  Printer in Windows problems

• The Vixia HF G30 allows a direct copy of video files from an SD card on an external USB hard disk

  I am considering buying a G30 and need to know if she will allow a direct copy of video files from an SD card on an external USB hard drive.  The manual is not clear on this point.

  Not to my knowledge (I own a G30 HF).  There is no present on-the-go USB functionality.

  Personally, I do not miss such a feature, because it causes all kinds of compatibility problems, especially with regard to the power of external USB hard drives. In addition, without any file manager, backup of your video files into a nightmare. I must admit that I am rather Cannon after not on an often incomplete function development budget and have it spent instead on the main features of the camera, such as optics. Of course, this is just my very subjective opinion, and other HF G30 clients may have different opinions on this.

  In order to back up my video files on the fly and without having to carry a laptop, I recently bought a made by Hanso Hyperdrive colorspace UDMA2 and installed a 1 TB in her drive. When on the ground and after having taken my shots I just pop in my inside SD cards and the device of copies on the video files to 17Mbyte per second. At home, I plug in the UDMA2 in my Linux video workstation using a regular USB cable and pull the video from the mobile disk. The UDMA2 also did incremental backups and comes with a basic file manager. While it has a color screen, it can't play back video. It is a video and photo backup dedicated device, nothing more. But it does a decent job on exactly that.

• Couldnot load file or assembly 'sorttbls.nlp' or one of its dependencies. The system cannot find the file specified using SharePoint Designer 2007

  I have a computer on my network when you open web files WSS 3 in SharePoint Designer 2007, I get the error 'could not load file or assembly 'sorttbls.nlp' or one of its dependencies. The system cannot find the specified file. "I have looked through some forms on the web and have concluded that this is a problem of .NET Framework 2, but I have not managed to solve the problem. He also seems to be keep me to load the Update Services administration console on a workstation by using MMC. Other posts on my network can open/edit SharePoint web site files in SharePoint Designer 2007 without this error and open the Administrative Update Services console withpout errors. I tried a repair on .NET 2. Anyone have any suggestions on another approach to fixing .NET?

  Thanks for your suggestions.

  Jeff

  Hello

  -What is the operating system installed on your computer?

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  Please ask your question in the Forum on TechNet Support. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/sharepointgeneral/threads

• I installed Windows 7 on my computer. Its rebooted normally, but when he was loading files to the top of the color went all wrong... As you do not see the weight...

  Installation of window 7. ! With a problem! Help, please!

  I installed Windows 7 on my computer. Its rebooted normally, but when he was loading files to the top of the color went all wrong...

  As you do not see the weight...

  Please help me!

  • 512 GB of ram with a Flash ram Drive his 10
  • Windows aero does not support "as the scan did not say very important hahah: D.
  • Intel Inside Pentium 4
  • Reference Dell computer WITH a disk emachine hard and things 'VERY OLD '.
  • 149 with Flash Drive 500 GB hard drive

  Help, please!

  PS. Mr. need help! D:

  I can run vista Basic that lol

  I didn't mean that you cannot run Windows 7. I have run on systems with 512 MB of ram. It will work, but will slip. It will be the same for Vista. I recommend that stick you with Xp until you are able to upgrade your ram.