Load the DMVPN Balance several tunnels

Try to balance 2 DMVPN tunnel to a remote router to our Central Administration site.   The remote router is a 2811 12.4.24 running.  It has two connections DSL and I built two tunnels DMVPN to my seat with each tunnel will a separate router.  I am running EIGRP across the WAN and LAN.   Please see attached drawing.

When I put two routes by default equal and just let EIGRP to balance between router 180.7.250.1 to favour road and very little traffic crosses the 180.7.249.1 road.

The reason why I try it is because this site is in kind of a remote and I can't get a 500KB to the top and 1.5 MB DSL circuit.  So to boost performance a bit I wanted to try running both circuits.

I am open to suggestions or advice on how to get a little more bandwidth of this site.

Thanks in advance.

EIGRP metric are determined by the delay, bandwidth, reliability and support. You have the same router, the same tunnel interface. All the interfaces involved in eigrp must match exactly the same if you want to balance the load across it. See how composites represent different below. If you can make them match your traffic balance the load.

Tags: Cisco Security

Similar Questions

  • Loading the same image several times

    I'm trying to dynamically load one image several times in flash. Basically, I want to end up with two movieclips mc1 and mc2 that contains the image. I am currently using the load (connected to the ProgressBar) component to dynamically load the image. It works very well for the loading of the image once, but I don't really know how to create a second clip with the image.

    Here is my code for loading the first image:


    var mc1:MovieClip = new MovieClip();
    var listener: Object = new Object();
    Listener.Complete = function (eventObj:Object) {}
    nextFrame();
    };
    imageLoader.addEventListener ("complete", listener);
    MC1 = imageLoader.content;
    imageLoader.load (imgURL);


    But everything that I tried to load mc2 with this same image has failed. I tried 'mc2 = imageLoader.content', 'mc2 = mc1', "attachMovie", "duplicateMovieClip", called imageLoader.load () twice on the imgURL and creating a second component Loader and load the image again. All of these methods have failed. Most of them can load mc1 alright and sometimes even mc2 appears on the scene, but in the mc2 AS is always undefined.

    Can someone point me in the right direction for the loading of multiple copies of the same image? It really shouldn't be so hard, does it?

    Well I found a solution. It turns out that Flash does not reproduce the content dynamically loaded as an image into a movieclip. But there is a small class called BitmapData that will do exactly what I was looking for. Here is the link that I got this info from: http://www.senocular.com/flash/source.php?id=0.174

  • Could not load the driver for Teredo Tunneling Pseudo-Interface

    Hello

    Does anyone know how to fix this problem (Vista) Business

    Product
    Teredo Tunneling Pseudo-Interface

    Problem
    Could not load driver software

    Description
    Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 10.

    Signature of the problem
    Problem event name: PnPDeviceProblemCode
    Architecture: x 86
    Hardware ID: * TUNMP
    Configure the class GUID: {4d36e972-e325-11ce-bfc1-08002be10318}
    The PnP problem code: 0000000-a
    Driver name: tunmp.sys
    Driver version: 6.0.6000.16386
    Driver date: 02/11/2006
    OS version: 6.0.6000.2.0.0.256.6
    Locale ID: 2057

    Additional information about the problem
    Bucket ID: 12121968

    Concerning
    Dave

    Hi Dave

    Can you please give us more information on your laptop and what is happening exactly?

  • supported vs IPSec VRF taking crypto maps for several tunnels

    Hi all!

    I came to know that we can use the same public ip address for the creation of several tunnels to different websites using crypto-cards featuring many lines each representing a reference to a particular tunnel and using vrf aware IPsec, but I would like to know what are the differences / advantages / cautions.

    Thanks for your time

    Murali.

    Murali

    That I understand the feature essentially allows you to have multiple IPSEC tunnels and traffic in the tunnel that is to say. source and destination IP of the high-end devices can be in different VRF.

    So it works mainly with the MPLS VPN IE. If you had several MPLS VPN each with their own VRF you can then run ISPEC tunnels on the MPLS network and when packets are received, they are automatically in the correct VRF.

    You could not do that normal crypto cards IE. You can cancel again several IPSEC tunnels on a public IP address but then everything would be traffic in the same global routing table.

    If the benefit is basically the same that you get with any VRF installation IE. logical separation of traffic on a single device.

    Can't really say much about the warnings as I've never used it but there are some restrictions.

    See this link for more details-

    http://www.Cisco.com/c/en/us/TD/docs/iOS-XML/iOS/sec_conn_ikevpn/configuration/XE-3s/asr1000/sec-IKE-for-IPSec-VPNs-XE-3s-asr1000-book/sec-VRF-aware-IPSec.html

    Jon

  • Several Tunnels with the same distance network & destination in cryptographic maps

    This maybe a newbie question, but I don't have production systems and don't really have a way to test our properly. We have an ASA 5520 with several tunnels from site to site. We already have a tunnel with one of the remote networks in 10.100.90.14. We have this IP on a subnet configured as remote network and the destination address in the card encryption. We also exempt rules NAT in place for our local network with the 10.100.90.14 address as the destination.

    We have another tunnel that must be built and who will have a different address peer, but that requires a large number of subnets and at least we'll have the same remote network/destination address in the map encryption and VPN tunnel that we already have in place.

    Is this possible to do with a tunnel of site to another without a static or dynamic NAT to a different IP address?

    I know, with physical networks, that it is impossible because of the static routes that are in place, but with the ipsec tunnels I'm not sure how it works, and as mentioned, I'm not able to test it.

    Any guidance would be appreciated.

    Bill

    The acl crypto map defines interesting traffic. If you have the same destination IP address, IE. 10.100.90.14 then if the source IE. the IP address of the client on your network is identical for the two tunnels, then no, it won't work and you will need to make some sort of NAT for one of the tunnels.

    Jon

  • Cisco ASA cannot create several tunnels at the same address in hand?

    We have several remote sites with Linksys WRVS4400N and Smoothwall firewall/vpn devices.  I need these sites to be able to connect to several tell-contiguous subnets to our main office.  This was done easily with smoothwall and linksys.  You create a separate tunnel for each subnet, and voila, you're done.  However, when I tried this with our ASA newly installed, it won't let me create several tunnels at the same address of the remote peer.  It is a problem because these sites have only a single IP address public static.  Did I miss something or ASA not allow connections to and from multiple subnets form a site with a unique address peer?

    Resembles the limitation on the WRVS4400N as Cisco ASA supports several subnets by tunnel.

    Is there anyway that you can configure a subnet more instead of specific subnets on the ACL?

    For example:

    If you 192.168.0.0/24 and 192.168.1.0/24, instead of having 2 subnets configured, you can combine them into 1 subnet 192.168.0.0/23

  • Cf11 on Windows 2012 several issue areas - will load the directory, but not direct FSTC

    I have a strange problem where I have two websites:

    D:\Inetpub\wwwroot\

    and

    D:\inetpub\webapps\

    that are related to the different areas.

    All about the value default (wwwroot) works very well with ColdFusion.

    However, on the 'webapps' site it loads ONLY CFM files if I call them implicitly as a directory.

    For example:

    http://my.site.com/

    load the index.cfm very well, however:

    http://my.site.com/index.cfm

    always returns a 404 error.  Is there some kind of mapping or permission that I need to make this work?

    I checked wsconfig and it is set to the IIS Web sites all.  I also ensured that the IIS_IUSRS permission is set on it.

    Has anyone seen this?  I appreciate all the advice.

    Thank you!

    Dan

    Have you actually tried wsconfig running again? Even if it is on all sites, if you add a new one, that it is not get included in this. You must re-run the new connector.

  • Need help with loading BSO cube with several data export files using the Regional service

    Hello

    We have BSO cubes that are huge and when I expoted data in files, it generated ABC.txt, ABC_1.txt, ABC_2.txt, like this.

    How to load this data in the Cube that sits on the other environments? We use Essbase 9.3.1.

    I can load the individual files using EAS data loading? If so, ABC_2.txt then ABC_1.txt and finally an ABC.txt would be the loading sequence back?

    Please suggest.

    As Essbase is written this block by block, each block will have its complete info if it is done as a single export or parallel export. You can easily prove this (and I have) If you export a database and load only files 2 or 3, it loads without error. don't forget that you load a file rules, the load fails when the first error. There is no error found, so a value of a complete block of information must be present. Also open export (large files can be opened with wordpad) and you will see a complete info for block exery

  • Loading of the SharedObject on several areas

    Hello

    I have a small question about SharedObjects. Suppose you want a flash movie to load the same SharedObjects little matter where it is accessible. Is it possible and how you would put in place the parent movie to carry the SharedObjects?

    Thank you

    Ed

    SharedObjects can not be shared between different areas.

    what you trying to do?

  • FDMEE 11.1.2.4 - how to load the same record source of 2 different custom in HFM members

    Hi Experts,

    We have the following situation:

    We need download a source document unique member 2 custom end balance as well as two rollforward Member custom movement 2 (additions, for example), the SAME account.

    In our GL, we have separate accounts for the additions, disposals, depreciation, etc.   In HFM, we use custom for these last members.

    I tried the multi-dimensions mappoing member card custom 2 individual based on the story.   It works fine, but when I add another condition by using the same account of source and card balance end Member, he only ended up filling a 2 custom members (according to what has been covered last importing).

    What would be the best way to load a single 2 custom members (same account) source document?

    I wanted to use the accounts of logic since I know that would work, but our financial team do not accept this approach.

    It is even possible to load the same record of 2 different HFM Member?  Even if we loaded the file even a second time in another place, I think that it still would replace what took the first time, instead of loading again to another custom on the same member account.  Even if we loaded to HFM on 'merge '?

    Any ideas at all would be appreciated.

    Thank you
    Mark Smith

    Why your financial team will not accept the approach of the accounts of the logic? He is the obvious solution to your problem. FDM or FDMEE, you can only load on the data at the intersection of a target element. If you want to load the same piece of data at several intersections in the target, then you need to have this piece of data repeated in data sources n then you will need something in the source that could identify how unique each copy so you can map correctly. As noted it is one of the main functions of the accounts of the logic, other approaches are likely to be messy, more prone to error and much harder to verify.

  • How to return to the line. Try using Firefox this AM. All I get is an error message "could not load the XPCOM.

    PC is several years old running Windows XP, but was working OK yesterday. This morning could not get Firefox at startup, only the error message "cannot load the XPCOM.

    Do a clean reinstall, delete the program folder before Firefox to (re) install a new copy of the current version of Firefox.

    Download a new copy of Firefox and save the file to the desktop.

    https://www.Mozilla.org/en-us/Firefox/new/

    Uninstall your current version of Firefox, for cleaning of the Windows registry and the settings in the security software.

       DO NOT  remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
    
       It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
       http://kb.mozillazine.org/Uninstalling_Firefox
    

    Your bookmarks and other personal data are stored in the Firefox profile folder and will not be affected by a uninstall and (re) install, but make sure that 'delete personal data' is NOT selected when you uninstall Firefox.

    If you keep problems also create a new profile.

  • In e-mails AOL, verification of the individual messages in the results of regular system in this error message: there was an error while loading the message. Please try again later.

    In access to AOL e-mail via the full version, I can navigate my account (old messages, new messages, spam, etc.) very well, but when I try to open an individual email, I get this error message: "there was an error while loading the message. Please try again later. »

    This is identical to a problem someone else was described in another thread... Unfortunately, nothing suggested you him seemed to work. I have BEEN cheated at the opening of a file attached to an e-mail immediately before this started, so I think it's a virus or something. IN ANY CASE... I AM able to open the messages when I use the basic version of AOL. Initially, the problem seemed to be in Firefox, but I tried with Internet Explorer now also and it's the same thing, and the basic version is accessible while the full version is still blocked.

    On both browsers, after the error message, I can't even click on individual posts to TRY to open another, and there are a few not-very-right boxes and the x and the things that appear on the screen that do not belong.

    Please tell me that you can not do that, go away... I tried uninstalling and reinstalling... Firefox who did not. I also enjoy McAffee, and that has not changed anything.

    You can do a check of malware with several digitization programs of malicious software on the Windows computer.

    Please scan with all programs, because each program detects a different malicious program.

    All of these programs have free versions.

    Make sure that you update each program to get the latest version of their databases before scanning.

    Alternatively, you can write a check for an infection rootkit TDSSKiller.

    See also:

  • When I run a web browser immediately loaded two blank tabs. How to make the browser to load the only?

    When I run a web browser immediately loaded two blank tabs. How to make the browser to load the only?

    Have you checked the home page to make sure that if is not the vertical bar (|) symbols?

    See the following for a few suggestions:

  • How to reboot can I configure Firefox to re - automatically load the tabs I had open when I stopped?

    Every morning when I do a soft start to clear the cobwebs out of my brain of the PC I have my boot settings automatically load 6 apps. Firefox is a. Then I go on a toolbar start tab and click Open all tabs and it loads 4 tabs for me.

    I am trying to automate the loading of the tabs

    I use Firefox 4.0. The previous version was a function that was asked, when you closed Firefox, if you wanted the tabs you have open at that time to arrange the next time you open Firefox.

    It's kind of way to jack-leg to get the tabs open on the re-start, although it was still irritation...

    This issue does not seem has happened in 4.0.

    Is there a setting to always call the question?

    Better yet, is there a setting to always have the tabs / a group of tabs always open at startup?

    Example-in my case I load Vonage Sharefile, then 2 home page tabs.

    This allows me to keep my poor brain organized during the day because I'm multitasking in Firefox and other applications, and telephone and other.

    I thank in advance.

    Kris

    "Example-in my case I load Vonage Sharefile, then 2 home page tabs."

    See: http://support.mozilla.com/en-US/kb/How+to+set+the+home+page

    "The previous version was a function that was asked, when you closed Firefox, if you wanted the tabs you have open at that time to arrange the next time you open Firefox. ...... This issue does not seem has happened in 4.0. ..... Is there a setting to always call the question? "

    One of the changes in Firefox 4: by default Firefox 4 does not display the warning "Save tabs and exit" then to the closure of several tabs, but it can be turned on again by changing some preferences.

    • Record of the tabs was not removed from Firefox 4, but it works a little differently.

      • By default, Firefox 4 will not ask to save tabs, but instead it will always save your tabs in the output. You can restore the next time by selecting "Restore previous Session" in the history menu, or by pressing the button restore Firefox's default homepage.
      • Note: This was a decision by the developers. On this forum, we are all volunteers without compensation here to help other users. Develop them and employees of Mozilla/Firefox rarely, if ever visit here.

    Also, make sure that you do not erase "Browsing history" when you use clear recent history:

    To display the message "save tabs and exit" when closing multiple tabs, you can do the following:

    1. Type of topic: config in the URL/address bar and press the Enter key
    2. Accept the warning message (promise to be careful)
    3. Open the preferences/list page
    4. Filter = browser.tabs.warnOnClose
    5. If its value is set to false, double-click top (in the lower panel) to toggle its value to true
    6. Repeat steps 4 and 5 for the 3 following preferences also:
      • browser.warnOnQuit
      • browser.warnOnRestart
      • browser.showQuitWarning
    7. See:

    You must update the following plugins:

    • Adobe Shockwave for Director Netscape plug-in, version 11.5.9.615
    • Adobe PDF plugin for Firefox and Netscape 10.0.0
    • Shockwave Flash 10.2 r152
    1. Check your plugin versions on one of the following links:

  • Update to Shockwave for Director
    • NOTE: this is not the same thing as Shockwave Flash; This installs the Shockwave Player.
    • Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place, so you can find it).
    • When the download is complete, exit Firefox (file > exit)
    • Locate and double-click it in the installer that you just downloaded, let the complete installation.
    • Restart Firefox, and look at your plugins.
    • Download link and more information: http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
  • Update of Adobe Reader (PDF plugin):
    • Within your existing Adobe (If you have already installed) drive:

      • Open the Adobe Reader program in your list of programs
      • Click Help > check for updates
      • Follow the instructions to update
      • If this method works for you, go to the section "download full installer ' below and go to"after the installation"below
    • Download the full installer (If you have NOT installed Adobe Reader):
    • After installation, launch Firefox and recheck your version.
  • Update the Flash plugin to the latest version.
    • Download and SAVE to your desktop, so you can find the Setup program later
    • If you do not have the current version, click on the "Player Download Center" link on the 'download and information' or 'Download manual installers' below
    • Once the download is complete, exit Firefox
    • Click on the installer, you just download and install
      • Windows 7 and Vista: will need to right click on the installer and choose 'run as administrator '.
    • Launch Firefox and recheck your version or up to the download link below to test the installation
    • Download and information: http://www.adobe.com/software/flash/about/
      • Use Firefox to go to the site above to update the Firefox plugin (will also install the plugin for most other browsers, except IE)
      • Use IE to go to the site above to update the ActiveX to IE
    • Download manual installers.
  • NB550D - battery icon does not always reflect the right balance of time

    I recently bought a NB550D and I must say that, first of all, I am very happy with it. It tends to be a bit slow, but I can live with that.

    However, my problem is that the battery icon may not always reflect the right balance of time. After a full charge, it can present 9 remaining hours but after a stop and restart it will be may show 75% and the remaining 3 hours. If I stop and restart it can show 75% and remaining 6 hours

    When I started the unit I enabled him to discharge completely (by means of) three times, as suggested by the seller in the store, but quite frankly it seems not a fall of difference!

    Any advice will be appreciated.

    Concerning

    Hello

    Like Tom, battery depands of working time on the use of the laptop.
    Battery time can always change.

    In addition, I would recommend calibrating the battery to ensure best performance.
    You must charge the battery until the led would turn to green (blue) and should unload completely the battery until the cell stops automatically.
    This process must be repeated several times.

Maybe you are looking for

  • HP H1W67EA #ABU: static noise in my new laptop computer

    I get a low static sound in my computer hp laptop, also one of the lights on the side of the laptop (seems to be the light of the hard drive) continues to blink on and outside.

  • Qosmio G50 - 129 media jumps randomly

    Hello I just 129 G50 and unfortunately, he jumps and jutters during playback of the media, films and music. He shoots almost as something running in the background and hiccoughing, but I can't place it? I tried the Task Manager and Event Viewer, whic

  • What is software counterfeiting?

    What to do if a victim of software counterfeiting? why they write on my computer the windows software is not genuine? How can I solve this problem of not being microsft is not authentic? my computer became very slow.what can be the causes? How can I

  • Recover the Original of Windows 8 for the new HARD drive

    Hello.. Drive HARD original of my Dell laptop inspiron 15R 5521 has been crushed. She had previously installed Windows 8. And, I had upgraded to windows 10 recently. Please guide me to reinstall windows 8 or 10 for the new HARD drive via online, coz'

  • Several new chassis M630 knives having errors CPU 1.

    We have a new chassis, we put in place that is filled with the new knives M630.  Several of the servers have errors.  They have installed Windows 2012 R2 and if restart us them, we get these errors.  We can reinstall the blade and run the server, no