Loading error when you try to load the Halo 2 "files are missing or damaged in the installation directory. A few important files required to run this game are missing from the installation directory.

Original title: load error when you try to load Halo 2

People at Microsoft, I have a problem trying to load Halo 2 on my dv7 Paviliaon with Vista and the 2.8 GB Intel Centrino 2 processor. When I try and load the game, I get and error stating: "the files are missing or damaged in the installation directory. A few important files required to run this game are missing from the installation directory. "It bothered me for several reasons. One: the disc that I use is an original disc out of the box so hsould have no problem. Two: the game has been loaded previously on the same computer without apparent problem at the time. It has been deleted (don't remember why) and when I tried to reinstall, the error came. Three: I did as recommended and updated all programs and drivers, nothing works. So my question is, how do I reinstall Halo 2 and what this problem will arise if I decide to buy and load Halo 3?

Thank you for your time in advance.

Hello

As you are facing problems with Halo 2, I suggest you to refer the link for better support:

http://forums.haloonwindowsvista.com/forums/

Tags: Windows

Similar Questions

  • get error when you try to lower the java load error 1-4 of 4 0 x 80070643.

    get error when you try to lower the java load error 1-4 of 4 0 x 80070643.

    This forum is for Microsoft Security Essentials.

    You question is with Oracle Java.

    It is recommended to go to www.oracle.com to get help.

  • Error when you try to play the game: memory access violation

    memory access violation

    I have redownloaded a game that has been previously loaded on my computer, now I get this error when you try to play the game "Memory Access Violation".

    Your sound card that is more than adequate.
    If the game was previously installed and worked fine then maybe it is not been completely uninstalled.
    I suggest you uninstall the game, look in the registry for any left over entries that can refer to the game.

    Then restart and reinstall the game.

    Alternatively, you can try to install in compatibility mode. If the program is not compatible, then you try to install and run the program in compatibility mode.
    Use the following steps:
    (1) right click on the program
    2) click Properties
    3) click on the Compatibility tab
    (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

    Check out the link here: make sure to run older programs in this version of Windows
    http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

    Let us know if that helps.

    Marilyn

  • Error when you try to view the application latencies

    I'm not able to get see Planner to latencies report application series of tests with multiple virtual machines in them. If I run a test that has 3-2 VMs in it while I'm able to view the results of the trial very well, however when I try to run tests with more of that I get errors when I try to view the results. When I try to load the web page results to see Planner, nothing happens, and I get the following error in viewplanner.log:

    2012-10-24 20:16:13, 025 INFO {}
    Unhandled error
    Traceback (most recent call changed):
    File "/ usr/lib/python2.6/site-packages/twisted/web/http.py", line 773, requestReceived
    Self.Process)
    File "/ usr/lib/python2.6/site-packages/twisted/web/server.py", line 127, process
    Self.Render (resrc)
    File "/ usr/lib/python2.6/site-packages/twisted/web/server.py", line 147, in rendering
    body = resrc.render (self)
    File "/ usr/lib/python2.6/site-packages/txjsonrpc/web/jsonrpc.py", line 112, rendering
    () defer.maybeDeferred(function,_*args).addErrback
    -< exception that is caught here >-
    File "/ usr/lib/python2.6/site-packages/twisted/internet/defer.py", line 133, in maybeDeferred
    result = f (* args, * kw)
    File "/ tmp/ViewPlanner/web_interface.py", line 527, jsonrpc_getResultsMap
    File "/ tmp/ViewPlanner/mysql_interface.py", line 571, in getTestAverages
    exceptions. KeyError: 0

    When I try to manually execute the python script statement, it tells me that there is no result for the test.

    I just ran a test locally with 276 VMs, according to viewplanner.log, all 276 VMs transferred their results to the device. Yet I still get this error when you try to view the results.

    I tried to create new images GoldenDesktop and GoldenClient, as well as deployed a new device see Planner and reinstalled all of its agent programs, nothing helps. Anyone know what could be the cause?

    We have seen this issue for large series and I attach a patch file that you can overwrite the/root/ViewPlanner harness directory and then restart the vdiappd service, and then you can give it a try.

    For manual results extratcion by using the report.pyc script, you must use '-j' I ' and '-j' operations if you ran just 1 iteration of the workload.

  • Error when you try to install the browser first elements 10 Inspiration

    On the Adobe Premiere elements 10 welcome screen, I get an error when you try to install the browser of Inspiration (IB).

    Sorry, an error occurred.
    This application cannot be installed because this installer has been misconfigured. Please contact the

    author of the support application.

    I have uninstalled/reinstalled the latest Adobe Air. I have connected to photoshop.com while trying to install IB as well.

    OS = Windows 7 64 bit

    Adobe products installed

    Photshop CS5

    Lightroom 3.5

    Thank you

    The team and I worked to create this document on the issue. Can you try the solutions listed and see if it solves the problem?

    Can not launch/install Inspiration browser from the home screen. First 10 items | Win 64 bit

    http://kb2.Adobe.com/CPS/926/cpsid_92680.html

    -Dave

  • Windows XP SP3: Access denied error when you try to change the beginning upward in MS CONFIG. Director of applications but I am the administrator.

    original title: access denied errors when you try to change the beginning upward in xp sr CIP 3 msconfig. I am the administrator, please the administrator

    I am a user with privileges under windows xp pro service PAC 3. I recently received an access denied error message acusing me of not being the administrator when I tried to limit the start up programs in msconfig. What should I do these changes in safe mode?

    You have scanned your system for malware? It seems its infected with something. Download ccleaner install / run. Then go to tools / startup. Delete the entries that you want here

  • Get 800b0100 error when you try to install the update KB905866 (Mail filter spam for x 64 systems) in Vista

    Get 800b0100 error when you try to install the update KB905866 (Mail filter spam for x 64 systems). It keeps failing even though I followed the steps all the recommended (in aid) and installed some other stuff.  Tried several times but nothing helped.  I saw a recommendation to install a Wups2.dll file but do not know if I should do it because the recommendation is for Windows XP and I have Vista Home.

    Hello

    I suggest check the link below and try do a SFC (System File Checker) scan and check if it helps.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    I would also say that you reset Windows update components and check if this may help.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

  • Error when you try to set the Parental control 'Unable to set settings for administrators user or unknown users.

    I am trying to set up Parental controls for the user account of my son and I get the following error: error when you try to set the Parental control 'Unable to set settings for administrators user or unknown users.

    I tried to use the administrator account.

    When I ran the System File Check sfc/scannow

    TI completed indicating certain files may be damaged and cannot be repaired and check the convertible bonds. LOG file.

    How can I know which files are corrupted.

    Any other Suggestions on how to fix this user profile?  Do I have a profile that I don't know?

    Hi wimuggss,
     
    Step 1: Disable UAC (User Account Control) and check the result
    See How can I change the behavior of user account control by using the cursor?
    Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.
     
    Important: Enable UAC after you complete the steps.
     
    Step 2: If the problem persists, try to set the parental control in safe mode and check the result. If you are able to apply settings in safe mode, this means that some program is causing this problem, mainly the security software.
    See Start your computer in safe mode
    Kind regards
    Syed - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.
  • Disabled-Adobe Acrobat 9 Pro on old PC. Implementation error when you try to install the new PC. "Invalid serial number."

    Disabled-Adobe Acrobat 9 Pro on old PC. Implementation error when you try to install the new PC. "Invalid serial number."

    Please see the following documents.

    1. Error "invalid serial number". Acrobat 9 | CS4
    2. Invalid serial number error

    Let us know if that helps.

  • Problems of conversion of PDF to MS Word document.  I managed to convert 4 files and now the subsequent files generate a "Conversion failed" error when you try to convert the file.  I have a big manuscript and I separated each chapter to assist with co

    Problems of conversion of PDF to MS Word document.  I managed to convert 4 files and now the subsequent files generate a "Conversion failed" error when you try to convert the file.  I have a big manuscript and I separated each chapter to help the conversion; as I said, the first 4 pieces without problem, then the conversion failure.  I tried to convert the document integer and same result.  Specifically, I bought the feature export to Word.  Please help.  I had initially export the Word Perfect PDF document and attempting to pass PDF to MS Word.

    Hi sdr2014,

    I'm sorry to hear that your conversion process is at a standstill. It seems that the problem is not specific to a single file, you have been unable to convert anything, since the first four chapters of a correct conversion.

    So, let's try this:

    If you want to convert via the ExportPDF site, please sign out, clear the browser cache, and then reconnect. If you use the drive, please choose Help > updates to ensure that you have installed the latest version.

    Please let us know how it goes.

    Best,

    Sara

  • code Ox643 error when you try to install the update of security for flash player (KB923789)

    I get the error code Ox643 when you try to install the update for flash player (KB923789) security - after Mr fixit running and the application of other measures recommended, I still have the error code and get the installation error code. What should I do now?

    Is Adobe Flash Player v11.3.300.257 (or higher) installed? Test here using Internet Explorer (only!)-online http://www.adobe.com/products/flash/about/

  • Error when you try to install the software update of tax

    It is for the HR Block Tax software,

    Update installs successfully on the XP machine, but on windows 7, I get this

    "Windows Installer does not allow patching of managed advertised products. At least one characteristic of the product must be installed before applying the patch.

    I made sure that it is running as an administrator. Tried to use the previous version of windows. Still lost.

    Google and seems that it may occur with other programs as well. Have not found a solution very clear.

    Hello Joslinm,

    1. do you get this error when you try to install any other application?

    I suggest that you contact the H & R support and check if the application is compatible with Windows 7. Here is a link you can follow to contact support:

    http://www.hrblock.com/support/index.html

    Thank you
    Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • 1330 error when you try to install the software main street

    Receive the following error message when you try to install the update of the software of Boulevard of Main Street Software, Inc. 2011 on a machine running Windows Vista 64 bit HP.

    File 1330.A error required cannot be installed because the file E:\Blvd\Data1.cab has an invalid digital signature. This may indicate that the file is corrupted. Error 8205 was returned by WinVerifyTrust.

    Another attempt to run this software update received the same message except the last line shows error 24592 was returned by WinVerifyTrust.

    I managed to install the software on a laptop then. I already tried to transfer all the content of DVD on my hard drive, then by running the Setup program, without success. I have also tried to run Setup in Windows XP compatibility mode, receive the same error message.

    It is about a Windows update that has caused similar problems for other users.

    KB978601 causes "signature digital invalid" error with a CAB file
    http://www.win7heads.com/Windows-Update/73744-KB978601-causes-invalid-digital-signature-error-cab-file.html

    If you have this update on your machine, you could try to uninstall via 'Programs and features' and 'View installed updates'.

    There are many other causes mentioned in these links too.

    http://www.Google.com.au/search?q=error+24592+was+returned+by+WinVerifyTrust&SourceID=IE7&RLS=com.Microsoft:-to the: IE-SearchBox & ie = & oe = & redir_esc = & ei = jLYyTJSoIoPJccP6mbYD

    http://www.Google.com.au/search?q=E%3A%5CBlvd%5CData1.cab+has+an+invalid+digital+signature&SourceID=IE7&RLS=com.Microsoft:-to the: IE-SearchBox & ie = & oe = & redir_esc = & ei = p7cyTP2aEc3Jcda52dYD

    What have to say about this, if you contact the software factory?

    The reason why it happens a machine and not the other could be because some of your programs or the system is missing updates, have older versions of the software, or third-party programs interfere with the installation.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/default.aspx/KB/929135

  • Satellite U205-S5034 - error when you try to create the recovery disks

    Hello world

    I have problems with the TOSHIBA recovery disk creator. When you try to create the recovery disks this error pops up:
    An unexpected error has occurred. Exit this application and start it again. (Error code: F1-0F00FE-00000002)

    The machine is a Satellite U205-S5034 under XP Pro SP3.

    Any help will be greatly appreciated. Thank you and have a nice day.

    DaveMatt44

    Hello

    What kind of DVD that you use to create a Toshiba Recovery disk? I have tried Verbatim DVD-R and TDK DVD-R and never had a problem with these discs. A friend tried DVD + R and he couldn t create a recovery disk. After he tried DVD-R and everything was fine but I do not know why this happened.
    So please try other discs.

    Also, check the Toshiba page for an update of the firmware of the CD/DVD drive. Maybe it will help you.

  • HTTP 503 error when you try to deploy the project in Visual Studio

    I get a http 503 error when you try to deploy a project in Visual Studio-SQL Server 2005. What this mean and how can I solve this problem?

    Hello

    I suggest you refer to the following msdn link for the fix for the problem.

    http://msdn.Microsoft.com/en-us/vstudio/aa718325

Maybe you are looking for