Loading icon when the slected report link

Similar Questions

• What happens when the error report are sent to Microsoft from my computer?

  I received a call from a Clayton asked for a Windows Service Center. He called about the error reports that were sent from my computer to Microsoft. He gave his phone number as 91 9008 37 23295 in Calcutta, India. If this has nothing to do with Microsoft or Windows?

  John is correct.  And to answer your direct question: "what happens when the error report are sent to Microsoft from my computer? -Not much.  If these reports are used at all, they are used for the statistical analysis and do not respond to individuals.

• Bug: Trash does not display 'empty' icon when the Recycle Bin is emptied.

  Bug: Trash does not display 'empty' icon when the Recycle Bin is emptied. This only happens when you use customized for the trash icons. The Recycle Bin appears correctly when office is updated.

  It would be nice if someone could answer this question, as it is 8 months old.

  Click Start, type regedit.exe, and then press ENTER.

  Reach:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\CLSID\ {645FF040-5081-101B-9F08-00AA002F954E}

  Export the branch above into a REG file.

  Exit Regedit.exe

  Open the REG file with Notepad, copy the content and include it with your answer.

  Ramesh Srinivasan . The Winhelponline Blog
  Microsoft MVP, Windows desktop experience

• Firefox loads, icon on the bar of tasks but when you click the slide of graphics off to the right, but does not fill the screen & when you right-click again, falls back into the icon

  Firefox, Thunderbird and Quicken were active when I loadad & ran a slot machine game. When I left the game & click on icon to return to Firefox full screen, I could see the flash of the image to the right of my screen and disappear. When I clicked on the icon in the taskbar, the reverse happened - the image flashed from the right down to the icon. When I hover the mouse over the icon, the open screens appear with the red X to close, but the same thing happens when I click on this box. Two other programs that have been opened, while the game was active work correctly, only Firefox has been affected. I can't open the program to access one of the menu items that I can't get the image of the screen on the monitor. I did uninstall and reinstall a freshly downloaded copy, I had to use IE, as I am now) but with the same results when I run. I did chose to save my settings, so if something has changed here so maybe that's the problem.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  Once you get the pop-up, simply select "" boot mode safe. "

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• display a loading icon on the selection list changes (submit page)

  4.2.1

  THM:2

  Hi there - we have a list with a bunch of values. On change, it is set to "Submit of Page" and there also some pl/sql running processes when the value of the list is changed. However, these processes take a long time to run. Wondering if there is a way to show a loading icon, it is executing. I know that this can be done by the intermediary of da I was wondering if there is a way to do this when we send defined page.

  Thank you!

  This is another option, but you can think of this as the same Park ball like the use of a dynamic action

  http://Apex-plugin.com/Oracle-Apex-plugins/dynamic-action-plugin/loading-icon_81.html

  you do not like the option DA?

• Export to Excel button rather than the export report link

  I use of Denes Kubicek export to Excel. The customer wants an Export to Excel button rather than the link in the Section of the report for the report's export. So I created a button named "Download to Excel" and created a branch of the Branch of URL of return to function under a condition "When the button is pressed" with "Download to Excel" and action of the branch is
  
  Start
  return ' f? p = & APP_ID.:0 : & SESSION. : D OWNLOAD_EXCEL:no:T_REGION_ID, T_EXCEL_NAME, T_PAGE: #REGION_ID #, MiniProfile_firms, & APP_PAGE_ID.';
  end;
  
  When I press the button to get the following "File download" windows error:
  < pre >
  Do you want to save this file, or find a program online to open it?
  
  Name: .xls [1]
  Type: Unknown file Type
  < / pre >
  
  Why is that happening and how can I solve this problem?
  
  Robert

  Robert,

  http://Apex.Oracle.com/pls/OTN/f?p=31517:108

  Create a hidden item: p108_region_id and it calculate whether it is NULL using the suite of applications:

  SELECT region_id
    FROM apex_application_page_regions
   WHERE application_id = :app_id
     AND page_id = :app_page_id
     AND region_name = 'Employees'
  

  Make your button a button URL with the following link:

  f? p = & APP_ID.: 0: & SESSION. : D OWNLOAD_EXCEL:no:T_REGION_ID, T_EXCEL_NAME, T_PAGE: P108_REGION_ID, my_report, & APP_PAGE_ID.

  and there you go.

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  -------------------------------------------------------------------

• Desktop icon when the program double clicked States not recognized go to control panel of the value binding

  I have a PC running windows vista. Recently, the desktop icons when double clicked do not work, a message appears telling me that the program was not found and to go to the association Control Panel to fix this value.

  I'm now PC expert so would appreciate any advice in simple terms.

  It happens with all the desktop icons, or only some?  If only some, what are their types of files (extensions - the identifier to three digits after the point in the name of the file)?

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates. Then see if you can open your desktop icons.

  There may be something wrong with some extensions (such as .exe files and the .lnk files).  Go to http://www.mydigitallife.info/2008/06/22/reset-and-fix-broken-windows-vista-file-ext-and-type-associations-include-exe-com-sys-zip-lnk-folder-drive/ and run the process for the .exe and the .lnk file types. ;  See if you can open your desktop icons.

  If this does not work, your user profile may be damaged.  To fix this use http://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.  If that is the only available Administrator Profile (you need to be an administrator to fix this), enable the Hidden Administrator Account (HAA) using http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?&lang=en&cr=US&guid=&sloc=en-us&dg=microsoft.public.windows.vista.administration_accounts_passwords&p=1&tid=d20f9db4-7b2c-48be-a087-7835dc2a9055&mid=d20f9db4-7b2c-48be-a087-7835dc2a9055.  If you don't remember the password, try nothing because that's probably what you (or seller) did during the installation.  Once that is done, don't forget to disable the HAA to save it in case it is necessary once again and for safety reasons (since people often try to hack into systems using this account).  Do NOT use the HAA as your administrator account because if you lose the only administrator on the system account or it is damaged again, then you're watered.  Then see if you can open your desktop icons.

  If you still have problems, after return and we will try other troubleshooting options.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Popup disble icon when the cut or the variation in volume via keybord on Dell Latitude E6430

  Hello

  Is there a way to disable the icon that appears on the screen when I press the buttons sounds on the keyboard?

  I made a snapshotcompare of the registry when I cut and it shows the path:

  HKLM\SYSTEM\ControlSet001\Control\Class\ {4D36E96C-E325-11CE-BFC1-08002BE10318} \0001\Settings\filter\SpeakerHp\MasterMute: 00
  HKLM\SYSTEM\ControlSet001\Control\Class\ {4D36E96C-E325-11CE-BFC1-08002BE10318} \0001\Settings\filter\SpeakerHp\MasterMute: 01

  But I can't find any key associated with the icon that shows when I cut. And I want just the disabled icon, not the function.

  Can I do this?

  / Alfred

  I have a Latitude E5420. Mine came with "Dell System Manager' installed - it's in the start menu > all programs. If I click on it, then on 'system and Device Manager. "

  Open 'Display settings', then 'Notifications' uncheck 'Volume', the display of the volume no longer appears when I press the volume buttons.

  If you don't have it but you want to try, go to the E6430 download page, select Windows 7 64 bit operating system and then expand the category of Control Point. I don't think that there is a version for Windows 8.

• CC only opens when the laptop not linked to internet

  When the laptop is connected to the internet Creative Cloud opens and allows me to launch Lightroom. However when the laptop is not related to internet, all I get is error screen that says I am offline and needs to connect to the internet again. It is not related to the day 30 'Refresh' which is required to check that my monthly payment has been processed. I use the Windows 8.1 operating system and CC build 2.2.129. The problem when the McAfee virus protection is active or disabled. What I've noticed is that sometimes when I start to creative cloud the "trial of the Star' button appears but when I click on the program solves the problem when I open Lightroom."

  I spent hours on the phone and via the Adobe Support chat link and they can not get this to work. I even they gave remote access on my device. I've seen other posts in the same direction, and despite the suggested fixes, the problem persists. It becomes very frustrating because I'm doing wildlife photography and it's a challenge when in the African Bush with no connectivity.

  When not connected to the internet, please try running the installation location apps.

  For more information, please see a launch Adobe Creative Cloud apps

  Hope this will help you.

  Kind regards

  Hervé Khare

• Internally, when the user triggers link ebs

  Hi all

  What internal process occurs when a user triggers ebs link in its IE and after when the username and password is seen how he treats then give the user his exact responsibility?

  Concerning

  
  

  Knight wrote:

  Hi all

  What internal process occurs when a user triggers ebs link in its IE and after when the username and password is seen how he treats then give the user his exact responsibility?

  Concerning

  Please see previous discussions for the same topic and discussion- https://forums.oracle.com/search.jspa?view=content&resultTypes=&q=Login+AND+Cycle+AND+EBS

  Thank you

  Hussein

• How to load something when the image appears

  Hello. I have a load_swf button that does this:

  swf_path = "sample.swf"

  load_swf.onRelease = function() {}

  loadListener.onLoadProgress = {function(target_mc:MovieClip,_bytesLoaded:Number,_bytesTotal:Number):Void}

  info.text = Math.round ((bytesLoaded/bytesTotal) * 100) + "%";

  };

  loadListener.onLoadInit = {function(target_mc:MovieClip):Void}

  info.text = "";

  };

  var mcLoader:MovieClipLoader = new MovieClipLoader();

  mcLoader.addListener (loadListener);

  mcLoader.loadClip (swf_path, swf_loader);

  };

  I want to do without having to press the button. I want to do when the image appears on the screen. Something like OnClipEvent (load) the problem is that I do not know how to convert this code works with OnClipEvent (load), can you help me?

  use:

  swf_path = "sample.swf"

  loadListener.onLoadProgress = {function(target_mc:MovieClip,_bytesLoaded:Number,_bytesTotal:Number):Void}

  info. Text = Math.round ((bytesLoaded/bytesTotal) * 100) + "%";

  };

  loadListener.onLoadInit = {function(target_mc:MovieClip):Void}

  info. Text = "";

  };

  var mcLoader:MovieClipLoader = new MovieClipLoader();

  mcLoader.addListener (loadListener);

  mcLoader.loadClip (swf_path, swf_loader);

• Choose Preserve Image Dimensions when the reissue of links

  Is there a way to change the preference "choose preserve Image Dimensions when rebinding" scripts? This setting is available in the user interface (in the Edit menu / Preferences / file manipulation tab).

  Andreas

  I don't know, but try:

  app.imagePreferences.preserveBounds = true;

  If true, preserve the boundaries of the image when the restoration of the links.

• FRM-41029 obtaining when the form report

  Hello
  I have the procedure to run the report but its running fine, but gives error FRM-41029 during the call to the form report.
  
  runrep('MATREP,'REPSER','PDF','F:\rec\RepEnt.RDF');
  
  Rep: = FIND_REPORT_OBJECT (repobj);
  SET_REPORT_OBJECT_PROPERTY (Repid, REPORT_EXECUTION_MODE, LENGTH);
  set_report_object_property (of REPID, REPORT_SERVER, repserv);
  set_report_object_property (RepID, REPORT_COMM_MODE, SYNCHRONOUS);
  set_report_object_property (REPID, REPORT_DESTYPE, 'file');
  set_report_object_property (of REPID, REPORT_DESFORMAT, repfor);
  set_report_object_property (of REPID, REPORT_FILENAME, repfile);
  
  Rgds
  Soumya

  Soumya,

  Change the line

       set_report_object_property(repid, REPORT_DESTYPE,'file');
  

  TO

       SET_REPORT_OBJECT_PROPERTY(REPID, REPORT_DESTYPE, FILE);    -- Remove the Single Quotes.
  

  Then it should be OK.

  Kind regards

  Manu.

  If my response or response from another person was helpful, please mark accordingly

• Crash when opening. Site prior to any loading appears to the crash report.

  Windows XP. Have used Firefox for years. Ran CCleaner, Malawarebytes, defragmented, Super Antispyware, reinstall. Tried to open it in safe mode by pressing F1 - same result. Happened here for the first time trying to clear the history/cookies. Any help would be greatly appreciated.

  If you use roboform, please upgrade to the latest version 7.6.2 and try

  • www.RoboForm.com/support/News

• Problem with the display of the icon in the interactive report

  Hello

  for several days I am looking for a solution on the web, but I have not found the right article.

  I can't display images in the display of the icon of interactive report.

  I tried to understand with an example of implementation of the SUMMIT.

  I work with the same component without success.

  IN MY PAGE:

  first region

  P1O_IMG1: File Explorer to download image

  P10_TITRE: text box: title

  P10_LIBELLE: area of tex: topic

  P10_CANCEL: button cancel

  P10_submit: button to submit

  in this area, I upload a picture and create a row in the CG63_IMG table

  ID_IMG	NUMBER
  FILE NAME	VARCHAR2 (400 BYTE)
  MIME_TYPE	VARCHAR2 (50 BYTE)
  CHAR_SET	VARCHAR2 (128 BYTE)
  IMAGE_CONTENT	BLOB OBJECT
  DATE_MAJ	DATE
  LIB_IMG	VARCHAR2 (400 BYTE)
  THE TITLE	VARCHAR2 (100 BYTE)

  and everything is OK

  second region with interactive report

  Select

  cg63_IMG.ID_IMG ID,

  CG63_IMG.ID_IMG as ID_IMG,

  CG63_IMG. Name of the FILE as FILENAME,

  CG63_IMG. Mime_type like MIME_TYPE,

  CG63_IMG. CHAR_SET as CHAR_SET

  CG63_IMG. DATE_MAJ as DATE_MAJ,

  CG63_IMG. LIB_IMG as LIB_IMG,

  CG63_IMG.titre,

  Decode (NVL (DBMS_LOB. GetLength (IMAGE_CONTENT), 0), 0, NULL, apex_util.get_blob_file_src (ID_IMG, NULL, 'P10_PHOTO', 'inline')) detail_img_no_style;

  apex_util.prepare_url ('f? p ='|: APP_ID |) » : 20 :'|| : APP_SESSION |': P20_ID_IMG :'|| ID_IMG) icon_link

  of CG63_IMG CG63_IMG

  in my report, detail_img_no_style, icon_link are hidden

  
  

  in attributes of reports

  the normal display mode is ok

  the detail view is ok

  display the icon: problem no picture

  I would like this (in the order of the lines of the "icon view" attribute)

  YES,

  NO,

  ICON_LINK,

  DETAIL_IMG_NO_STYLE,

  TITLE,

  HEIGHT = "140" WIDTH = "140"

  #TITRE #.

  '',

  ""

  
  

  third region

  I defined a P10_PHOTO point: File Explorer, hidden

  Like this

  Parameters:

  NO,

  BLOB type column specifies in the attribute of the source point,

  MIME_TYPE,

  FILE NAME,

  ' ',

  DATE_MAJ,

  YES,

  ' ',

  Inline

  
  

  Source:

  Still, replacing everything,.

  Databas column,

  Per session.

  Value of source = IMAGE_CONTENT,

  ' ',

  ' '

  
  

  It is difficult to get information: how the element such as P10_PHOTO must be created.

  
  

  APEX 4.2.5 WITH ORACLE HTTP SERVER
  

  
  

  Concerning

  
  

  MARC
  

  
  

  
  

  
  

  
  

  
  

  
  

  user_fr_cg63 wrote:

  Hello

  for several days I am looking for a solution on the web, but I have not found the right article.

  I can't display images in the display of the icon of interactive report.

  I tried to understand with an example of implementation of the SUMMIT.

  I work with the same component without success.

  IN MY PAGE:

  first region

  P1O_IMG1: File Explorer to download image

  P10_TITRE: text box: title

  P10_LIBELLE: area of tex: topic

  P10_CANCEL: button cancel

  P10_submit: button to submit

  in this area, I upload a picture and create a row in the CG63_IMG table

  ID_IMG	NUMBER
  FILE NAME	VARCHAR2 (400 BYTE)
  MIME_TYPE	VARCHAR2 (50 BYTE)
  CHAR_SET	VARCHAR2 (128 BYTE)
  IMAGE_CONTENT	BLOB OBJECT
  DATE_MAJ	DATE
  LIB_IMG	VARCHAR2 (400 BYTE)
  THE TITLE	VARCHAR2 (100 BYTE)

  and everything is OK

  second region with interactive report

  Select

  cg63_IMG.ID_IMG ID,

  CG63_IMG.ID_IMG as ID_IMG,

  CG63_IMG. Name of the FILE as FILENAME,

  CG63_IMG. Mime_type like MIME_TYPE,

  CG63_IMG. CHAR_SET as CHAR_SET

  CG63_IMG. DATE_MAJ as DATE_MAJ,

  CG63_IMG. LIB_IMG as LIB_IMG,

  CG63_IMG.titre,

  Decode (NVL (DBMS_LOB. GetLength (IMAGE_CONTENT), 0), 0, NULL, apex_util.get_blob_file_src (ID_IMG, NULL, 'P10_PHOTO', 'inline')) detail_img_no_style;

  apex_util.prepare_url ('f? p ='|: APP_ID |) » : 20 :'|| : APP_SESSION |': P20_ID_IMG :'|| ID_IMG) icon_link

  of CG63_IMG CG63_IMG

  in my report, detail_img_no_style, icon_link are hidden

  
  

  in attributes of reports

  the normal display mode is ok

  the detail view is ok

  display the icon: problem no picture

  I would like this (in the order of the lines of the "icon view" attribute)

  YES,

  NO,

  ICON_LINK,

  DETAIL_IMG_NO_STYLE,

  TITLE,

  HEIGHT = "140" WIDTH = "140"

  #TITRE #.

  '',

  ""

  
  

  third region

  I defined a P10_PHOTO point: File Explorer, hidden

  Like this

  Parameters:

  NO,

  BLOB type column specifies in the attribute of the source point,

  MIME_TYPE,

  FILE NAME,

  ' ',

  DATE_MAJ,

  YES,

  ' ',

  Inline

  Source:

  Still, replacing everything,.

  Databas column,

  Per session.

  Value of source = IMAGE_CONTENT,

  ' ',

  ' '

  
  

  It is difficult to get information: how the element such as P10_PHOTO must be created.

  
  

  APEX 4.2.5 WITH ORACLE HTTP SERVER

  Instead of all that typing it would have been easier to download the application at apex.oracle.com and share the problem here...

  Why does P10_PHOTO exist when there is already an article for the download of files in P10_IMG1?

  Is there a process to look for automatic line (ARF) DML defined to fill the first area? If not, create one and its the Nevervalue condition.