Loading of a DLL on RT: Missing Export "DecodePointer" "Kernel32.dll" and 7 error when calling the DLL

Similar Questions

• error when calling NtSetTimerResolution in NTDLL 1097. DLL

  I get 1097 error when calling NtSetTimerResolution in NTDLL. DLL. why?   I scoured most of the posts on this forum describing the 1097 error and tried the solutions without success.

  This is a link to the function prototype (copied below) that I adapted in the node call the attached vi library (you will be asked to locate NTDLL. DLL on your system when opening it)

  NtSetTimerResolution and NtQueryTimerResolution are defined as follows. All hours are stated in hundreds of nanoseconds.

  NTSTATUS NtSetTimerResolution (
  IN ULONG RequestedResolution,
  IN BOOLEAN defined.
  ON PULONG ActualResolution
  );

  Parameters

  RequestedResolution

  The desired timer resolution. Must be the legal scope of the system timer values supported by NT. The standard x 86 systems it's 1 to 10 milliseconds. The values that are within the acceptable limits are rounded to the next higher standard x 86 HAL millisecond limit. This parameter is ignored if the Set parameter is set to FALSE.

  Set

  This is TRUE if we ask a new resolution of the clock, and FALSE if the application is indicating that he hasn't needed a resolution already implemented.

  ActualResolution

  The resolution of timer in effect once the call is returned in this parameter.

  Woohoo! I solved the problem.

  I was using a copy of NTDLL. DLL C:\Drivers\I386\SYSTEM32\NTDLL here. DLL (version 5.1.2600.1106)

  instead of C:\WINDOWS\system32\ntdll.dll here (version 5.1.2600.5755).

  An observation aside Interestingly enough, I did, when I tried to put the old version in C:\WINDOWS\system32 to see if it was just a problem of dependence, rather than a version number, I couldn't do it!  I tried renaming C:\WINDOWS\system32\ntdll.dll C:\WINDOWS\system32\ntdll.dll.old and immediately a replacement c:\windows\system32\ntdll.dll pop up would be in his place! I even tried to drag / drop of C:\Drivers\I386\SYSTEM32\NTDLL. DLL C:\WINDOWS\system32\ntdll.dll, it seemed to replace, but a system of security immediately replaced it with the latest version.   WinXP is smarter than I thought, or maybe something like Microsoft Windows Defender Antispyware installed by our company does this.

  In any case, I've confirmed lateer version is necessary because when I copied C:\WINDOWS\system32\ntdll.dll to C:\Drivers\I386\SYSTEM32\NTDLL. DLL, it also solves the problem.

  You might well ask why I did not use the correct version in the first place - well not knowing where he was, I only noticed the old version when I searched for it with my Google Desktop.

  Rgds

• Reviews for .dll file loading error when starting the laptop

  After removing an infection from malware Thinkpoint of my laptop and reconstituted at almost normal speed, a notice of a .dll file loading error appears while booting.  What are the options to eliminate that?

  This isn't a lot of information to go, but it's because forums MS Answers does not prompt for information, when a new question is asked.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Read this and see if it looks like your question and if it is not, let us know exactly what you see and we will always fix it:

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
  .  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• error when inserting the values too much or miss comma

  Hai All
  
  during the insertion, I got an error when inserting
  
  I have a table called T1 and declared as date I need to insert the current date and time in this column
  
  
  So I converted a varchar column and concat with time and iam trying to insert when inserting I got error
  
  
  insert into dail_att (respondent) values (to_date (to_char (attend_date, 'ddmmyyyy') |)) ("0815',"ddmmyyyy hh24");
  
  
  Concerning
  
  Srikkanth.M

  Hello
  Please let us know

  Desc dail_att;
  

  and the sample values in

  attend_date
  

  (There is also a ')' missing in your SQL, correct SQL would be

  INSERT INTO DAIL_ATT
              (INTIME
              )
       VALUES (TO_DATE (TO_CHAR (ATTEND_DATE, 'ddmmyyyy') || '0815',
                        'ddmmyyyy hh24'
                       )
              );
  

  * 009 *.

  Published by: 009 on March 18, 2010 21:23

• Anyone who has already seen this error when calling a dll? "Arbitrary.dll?"

  Hey people, I enclose a jpg of the error I get whenever I try and load a vi whose subVIs call a 'library function call '.

  "Double click call function I can check that the ' name of the library or the path ' is correct, and the function name is what I want.

  I do not understand why it tells me I need to "Arbitrary.dll" - the name of the lib is adwgc.dll as shown in the path (I checked).

  Anyone who deals with this error before?  I am naïve enough at the moment, any help will be appreciatized and surely kudo would be!

  Thank you

  -pat

  Edit-also, I'm using LV 2011

  You get this error because adwgc.dll is responsible Arbitrary.dll because internally that whoever wrote adwgc.dll called a function in Arbitrary.dll. Is the only one with this problem to obtain Arbitrary.dll and place it in a folder that adwgc.dll can load it. Put it in the same folder as adwgc.dll should work.

  Where did you get adwgc.dll to and are you sure they provide Arbitrary.dll as well?

• missing Ntoskrnl.exe and other errors when who reinstall windows 7 pro 64-bit

  I had windows installed on a HARD drive and received an SSD and I decided on the SSD HARD drive image, so I wouldn't have to reinstall. As I suspected it might that cause some problems and I decided to simply wipe the SSD drive and attempt to reinstall. I wiped the SSD and started my windows 7 Professional 64-bit SP1 DVD. It will pass through the first process (Windows loading files) with the screen of levels of grey and the downstairs, but subsequently loading bar, I get an error telling me that the ntoskrnl.exe is missing or damaged, and I have no option other than to try again to load the disc, or stop. I have another disc of Windows 7 Professional 64 bit I tried to use, and it gave me the same message. There are a few other errors I received, I do not at the moment, but as soon as I get some time and if I get them again once I will update the thread with this info.

  I also ran memtestx86 and there were errors with a specific location, but I just removed the RAM of this niche and I guess it should be OK after that. Am I wrong?

  I am the computer OEM. If I need to provide more information please let me know and I can accommodate.

  Thank you.

  The problem was with RAM. One of my 4GB DIMMS was bad. I removed and changed my poles autour needed and I could boot disk Windows 7 Pro and install correctly.

  A faulty RAM stick was causing the problem.

• Opening 5 LR I see "Lightroom has encountered an error when reading the preview cache and need to quit."  I deleted the folder Preview Cache completely (saved).  What can I do next to load Lightroom?

  Anybody out there can help get LR works again.

  Open LR 5 I see message "Lightroom has encountered an error in its cache of the preview reading and needs to stop smoking".  I deleted the folder Preview Cache completely (saved).  This does not solve the problem.  What can I do next to load Lightroom?

  If you remove the preview cache folder and the problem persists, then most likely you have found the wrong preview cache (it's for a different catalog previews) and you must find the right cache overview. You should use the search function of your operating system to find all files whose name ends with Previews.LRDATA and remove each of them until you can open your Lightroom Catalog.

• Get the error when after the desktop is loaded: "search parameter was a problem and will be shut down."

  original title: definition error according to the office is responsible.

  the search parameter error message had a problem and will be shut down. This happens when startups while remaining on the desktop.

  Hello

  1. What is the exact error message you get?

  2. have you recently made changes to the computer?

  I suggest you to see the site mentioned below:

  Step 1: Safe Mode

  Start the computer in safe mode and check if the problem persists

  A description of the options to start in Windows XP Mode

  http://support.microsoft.com/kb/315222.

  If the problem does not persist in star safe mode the computer to the boot and see if the problem still occurs.

  Step 2: Clean boot

  How to configure Windows XP to start in a "clean boot" State

  http://support.microsoft.com/kb/310353.

   

  I also suggest you to see link below:

  Advanced Troubleshooting for General startup problems in Windows XP

  http://support.microsoft.com/kb/308041.

  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.

  Warning: As there is a possibility of loss of data after the upgrade on site I suggest you make a backup before the operation.

   

  Note:  When checking a disk for errors, if bad sectors si des secteurs defectueux sont are found then the system tries to repair sector. All data may be lost. So make a backup of the data.

• error when pass array 1 d by data in table pointer via Labview-built c++ dll

  I'm trying to generate a Labview VI to a DLL and let it be invoked by vc ++, by which a 1 d array is passed. However, I can't generate the DLL when you use the data pointer to the table, which gives the error like below:

  [ERROR]
  Code :-2147221480
  Strengthening of the DLL.
  Error when compiling the DLL as a function name or a parameter is illegal. Check function and parameter names are legal C identifiers and are not inconsistent with the LabVIEW headers.
  Additional information: 9 project link errors
  Type Library generate error. MIDL.exe failed during the compilation of the odl file used to create the type library.
  Note: The error indicates that the odl file has unknown types. This error is possible when
  works with non-standard types is exported using the method qualifier exporting files in
  release the configuration that have not been recompiled during the build process.

  The Prototype of VI define is as below

  

  But, if I use the pointer to manage through the table, the generation is successful, error-free. I write something to call the DLL built labview, which basically reads 1000 double the data of an instrument.

  #include "TestDQMaxDLL.h"
  #include 
  
  using namespace std;
  
  int main(int argc, char** argv) {
      cout << "Start testing DQMax DLL" << endl;
  
      int leng{ 1000 };
      DoubleArray rawDPData = AllocateDoubleArray(leng);
      test_dqmax_dll(&rawDPData);
      cout << "Successfully invoked the DLL!" << endl;
      cout << "DoubleArray.len: " << (*rawDPData)->dimSize << endl;
      for (int i = 0; i < leng; i++)
      {
          cout << (*(rawDPData + i))->elt[0] << "\t";
          if (0 == i % 10)
          cout << endl;
      }
  
      system("pause");
  
      DeAllocateDoubleArray(&rawDPData);
  }
  

  But the printed results are not correct.

  My questions are:

  1. why cannot generate DLLS with the data of table pointer. In this case, the argument of the function is as simple as a double array.

  2. for table handle pointer, when the resutls are incorrect and how to get the good ones.

  Any comments would be appreciated.

  BTW: I use Labview 2012 with Visual c ++ 2013 on Windows7 64 bit.

  I never needed to pass a table of LabVIEW handle external code. Search this forum for posts of RolfK, it is most likely to have posted such an example. I recommend that you keep things simple and remodelling your table a table 1 d 2D before moving on to external code and manage as a 1 d table (it's just a little extra math).

  Sorry I don't have a solution on why you can't build with a 1 d as a pointer of table table. If you post your project I'm happy to try to build (I'm on LabVIEW 2012, however), but as you said, it will rely on another machine, it seems more likely to be a problem with something on the specific computer where there is a problem.

• Error 1097 when calling DLLS in LabView

  I get an error 1097 when calling the LabVIEW provider library. Curiously, the error, the DLL routines still seem to do what is asked of them.  This is the test code.  It opens an Ethernet connection to a controller of axes Galil, he asks (possibly) the value of its internal clock, and then closes the connection.  Each call library function returns error 1097 but "valve function" I32 error number is always zero. Open function causes the connection to be opened, the command function causes the send command and receives a reasonable answer, narrow funtion seems to cause the connection to be closed.

  

  Here is what I see when I run the test:

  

  Also directly configure call-library functions, as I did in this VI, I also tried using the import-shared-library Wizard to create a vilib of functions of the DLL and I get the same behavior and errors when I use these functions.  I tried to tweak some of the data types in my configured manually call library functions to see if I could find a combination that worked better with the library, but had no luck there.

  I use the x 86 version of the DLL with v2014 LabVIEW 32-bit on a 64 bit windows system 7.  I see that the error on the two computer systems of different work configured in this way. I see a similar error on a home computer with just the RTE of 2014 installed. The manufacturer says they can not reproduce the error. I always saw the error over multiple versions of their library DLL.

  In the attachment ZIP it has a link to the DLL library on the manufacturer's website. There is also a copy of the VI, the DLL and a large part of how-to-use documentation that accompanies the DLL.

  I was hoping that someone who was familiar with the use of the call-library function might take a peek at what I do and see if an error could be spotted.

  Unable to find an error, I did, I would be happy to suggestions on how I could solve this. Little seems to me like there may be a problem with the library. The manufacturer, Galil, said that they have opened a log with OR to see if NEITHER could help but since Galil said they can not reproduce the problem and provide an example of the NC, it really went anywhere.

  Given the decoration of symbol names as exported by the DLL I "m convinced that you must change the stdcall calling convention.

• Get the error message about the file cCNColms.dll missing at startup.

  I get the missing file from cCNColms to C:\windows\when dll I start and after connection as I administer. Can't find any help on the internet. I did a fixboot and have done several analyses. A fixmbr command showed that corruption but a fix can damage the disk partitions. Anyone have any suggestions? Thank you

  Using a Google search, I do not met that DLL and it has a special name, and is in the c:\windows folder so it sounds suspicious to me.  I would say that your system is perhaps currently or has been infected by malware.

  Because the MS Answers forum asks you to zero information on your system when a new question is asked, we know absolutely nothing about your system - and I would skip trying things.

  Read these instructions carefully and see what you can find:

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding
  .  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
  .  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• 2 errors cannot start the file missing PSHED.dll and a blue screen error 0x0000C1F5

  Hello

  A few moments ago I had to do a restore of the system for some reason forgotten but restoring interrupted when the power off when I tried to restart it gave me a chioce of such boot options that start normally start SafeMode etc... but when I choose one of them it is said that the PSHED.dll file is missing or currput so I put in my drive repair/install and reboot, but after the white bar has loaded and the green bar loads, it gives me a blue screen error with the info tech being 0x0000C1F5 and the rest are zero

  I have a gateway with windows Home premium 32-bit model and more recent material I instaled a grapics card xfx 9800gt nvidia and a new mouse, any help would be appreciated thanks

  -Renton

  Hello

  This error is somehow a special case:

  Stop error message when you start a Windows Vista-based computer: "0x0000C1F5".
  http://support.Microsoft.com/kb/946084

  How to get around the Stop error 0x0000C1F5 on a Windows Vista-based computer
  http://support.Microsoft.com/kb/970101/en-us

  Stop error when you start a Windows Vista-based computer, even though hotfix 946084 is installed on
  computer: "0x0000C1F5".
  http://support.Microsoft.com/kb/958069/en-us

  Other methods:

  Workaround for STOP 0x0000C1F5 / 0xC1F5 / C1F5 / BSOD / CLFS. SYS / KB946084
  http://www.delmartian.com/nullpointers/workaround-for-stop-0x0000C1F5-0xC1F5-C1F5-BSOD-CLFS.sys-KB946084.html

  Easier to read same message
  http://BSODs.com/content/Windows-Vista-and-stop-0x0000C1F5-Linux-anyone

  SystemRescueCd
  http://SysRescCd.org/Main_Page

  Video fix
  http://www.YouTube.com/watch?v=Y_OjCkbZyTw

  Video Fix - Linux
  http://www.YouTube.com/watch?v=SwSvIhyZRVc

  ================================================

  For the most part, the BlueScreens (the above is a special case as noted)

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot the BlueScreens - top 3 answers.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Fatal error: unable to load library "pdh.dll."

  When I double click on Skype icon, a dialog box appears. It says "Fatal error" at the top, and inside, it says: "cannot load library 'pdh.dll.'" "I can't Skype to open at all.

  I used Skype without problem the day before, and I did nothing for all the files or anything like that. I don't think so.

  I restarted my computer, uninstalled and reinstalled Skype and entered %APPDATA%\microsoft\windows\sendto and renamed the Skype folder, tried to open Skype, then renamed the file back again. None of this has worked.

  I did a scan for Malware, and he came clean. I am running a virus scan.
  Can someone help me?

  Try to run the tool (sfc.exe) System File Checker

  http://support.Microsoft.com/kb/929833

• 0xC0000221 error windows didn't load a critical system driver is missing or corrupt.

  Hey, I got a letter on my laptop to install service pack 2 for windows vista and I did it with no complications until I reset my laptop and when it came back I received an error:

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "repair your computer."

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  File: \Windows\System32\drivers\ecache.sys
  Status: 0xc0000221
  Info: Windows could not load a critical system driver is missing or corrupt.

  I followed these instructions several times and made repairs to start ending telling me that "Windows cannot repair this problem automatically" and "If you recently set a device to this computer, like a camera or portable music player, remove it and then restart your computer." I have nothing connected to the computer.

  I also tried to restore the system that is not no matter how far back that I try to restore to.

  Take your laptop computer to a local computer repair shop, reputable and independent.

• I have a Dell computer that came with Windows XP Home edition. When I start my computer the monitoring of ERROR appears: RUNDLL error loading \3\DLBUtime.dll

  Error loading \3\DLBUtime.dll

  I have a Dell computer that came with Windows XP Home edition.  When I start my computer the monitoring of ERROR appears: RUNDLL error loading specified not found \3\DLBUtime.dll module

  I just click 'ok' and he goes, but, as for what it stop popping up everytime I start my computer.

  Can someone help me with this?

  Aprilm,

  You are LuLu5119, who posted a question last August?

  If this isn't the case, you should have started your own thread.  If so (and even if not), you should have responded to questions about Dell printers.

  Assuming that you complain of a "Error loading \3\DLBUtime.dll" message that appears when you start your computer, you should know that the DLBUtime.dll file probably has something to do with the software from Dell which has been partially deleted, but could also be indicative of malware as well as partially withdrawn.

  In both cases, the best way for start you to prevent the message at windows is to download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

  Install the Autoruns and let it complete the scan of your computer.  Then click on the "Connection" tab and uncheck the following entry:

  Look for an entry that has 'DLBUCATS' in the first column.  If you do not see that, look for "rundll32 \3\dlbutime.dll" in the last column ("path of the Image).

  Uncheck that entry, close Autoruns and restart your computer.  You should get is no longer the message.

  If for any reason, you find later that you need dlbutime.dll running, run Autoruns and check the box. If you decide that you need never again, run Autoruns, right-click on the entry and select Delete.

  As General precautionary measure, in case your entry dlbutime.dll was related to malicious software, rather than the Dell printing software, download the following free scanners:

  MalwareBytes Anti-Malware: http://malwarebytes.org/
  SUPERAntiSpyware Portable: http://superantispyware.com/portablescanner.html

  For MalwareBytes Anti-Malware, download, install, update and run.
  For Portable SAS, follow the instructions on the Web page (note that the instructions assume that you use a different computer to download; if you're not, just make a note of the name of the file).