Loading of Windows XP on a Dell Inspiron 1300: "file \ntkrnlmp.exe could not be loaded disk #2 (code 7).
I'm reloading Windows xp home edition to a formatted hard drive and floppy disks. The error ' file \ntkrnlmp.exe could not be loaded disk #2 (code 7) "makes its appearance. What should I do to correct this?
I'm reloading Windows xp home edition to a formatted hard drive and floppy disks. The error ' file \ntkrnlmp.exe could not be loaded disk #2 (code 7) "makes its appearance. What should I do to correct this?
Please read the steps of troubleshooting for that mistake HERE. If you want more help back post.
Tags: Windows
Similar Questions
-
file ntkrnlmp.exe could not be loaded error code 7 2 times I tried by diskette.
My cd-rom drives do not work on my windows xp media centeredition 2005. I have loaded windows XP on 6 disks
on disc 2, it won 't finishes loading.
Hello1. are you able to use the CD to the other CD drive?See the methods in the article below and check."Ntkrnlmp.exe could not be loaded. The error Code is 7 "Error Message occurs during Windows Setup
http://support.Microsoft.com/kb/318729I hope this helps. -
I'm trying to "sweep" and reinstall windows XP pro on a computer that has had problems. I get the error ' file \i386\ntkrnlmp.exe could not be loaded error code 32768 is Setup cannot continue to press a button to exit "as soon as I got the boot from the cd (and actually after a long break). Help, please!
Hello
Try the steps listed in the link below and check if it helps:"Ntkrnlmp.exe could not be loaded. The error Code is 7 "Error Message occurs during installation of Windows: http://support.microsoft.com/kb/318729
-
original title: I get an error code 32768
File \i38\system32\ntkrnlmp.exe could not be loaded. The error code is 32 768. Implementation cannot continue. How can I fix?
Hello
· What is the number and the model of the computer?
· Which edition of Windows you install?
Try the steps listed in the link below and check if it helps:
"Ntkrnlmp.exe could not be loaded. The error Code is 7 "Error Message occurs during installation of Windows: http://support.microsoft.com/kb/318729
-
PC turns off by itself and came back, but would close market back as soon as windows starts to load and kept doing this until I stopped him. put in a cd of windows xp and it has started and froze while loading file volume Dynamics stop him again and when it started this error message came up.i386\ntkrnlmp.exe code 7
Hello
I suggest that you follow the steps in this article to resolve the problem.
"Ntkrnlmp.exe could not be loaded. The error Code is 7 "Error Message occurs during Windows Setup -
My dell inspiron 1420 built in webcam is not detected on Windows Vista
Title: original webcam not detected
My dell inspiron 1420 built in webcam is not detected. I think I might have deleted a program associated with. I tried to reinstall the driver using the given cd but I get an error message. Please help :) thank you.
Hello
What is the full error message that you receive?
Method 1: You can run the fixit available in the link below and then check if it makes a difference
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
Method 2: You can see the steps described in the Dell link below
Webcam does not work
-
64-bit windows 7 drivers for Dell Inspiron 15 R 5537
Please give me the link for 64-bit windows 7 drivers for Dell Inspiron 15 R 5537
Simple PCI 1 communication controller)
CRW - USB 2.0 2)
Contoller video 3)
http://www.Dell.com/support/drivers/us/en/19/product/Inspiron-15R-5537 looks like you need to install the Chipset drivers that must be installed before anything else. It is not installed first, other drivers will not install correctly. Make a list of your hardware Manager devices to check that you actually material. He must choose the right ones for your configuration. Some drivers listed may be for you do not have the hardware.
-
Buetooth driver installs in the window 8 on laptop dell inspiron 1564
I have Dell Inspiron 1564 laptop but Bluetooth is not indicated in window 8 while he showed in the window 7 driver installation, is not in the window 8 they say compatibility problem, I have tried several ways but not able to install the Bluetooth driver. in window 8. I also check BIOS showing Bluetooth is on, but not found in window 8
Try to download the driver that is compatible with Windows 7 on your Windows 8 of the Dell Web site.
Please report this problem to Dell support.
Take a look at the Troubleshooting of hardware on Windows 8 compatibility issues
-
I tried to install Windows 7 Home Premium Upgrade, 32-bit version. My current system is an Intel iMac (later), with Windows XP - SP3 loaded as a virtual machine with Parallels Desktop 4.0 build 3848 (according to their website, it is supposed to support Windows 7).
I allocated enough space RAM and HARD drive of the virtual machine to run Windows 7. No matter what I do, when I try to run setup.exe, I get the error message: "the file 'autorun.dll' could not be loaded or is corrupt. Setup cannot continue. Error code is [0x7E].
The file 'autorun.dll' is present on the disk.
I saw on the internet that other people have also had this problem, with or without Parallels Desktop, and get a replacement DVD of Windows 7 program made no difference to them. Nor is it an available answer, I've seen.
My Windows 7 disc is new, so I was hoping that Microsoft could solve the problem for me?
Thank you.
OK, so, this response is a little late to come, but if you never solved...
I just encountered the same problem - editing similar (Mac, Parallels 5 in my case, the SP3 of XP, MS Windows 7 Home Premium Upgrade) - you must make sure that the DVDROM drive hardware is mapped to "D:" on your XP installation. Thus on the Parallels Desktop menu go to devices, CD/DVD1 and make sure that all your actual DVD player is called is selected (should be the vertical entry in the menu) - not true CD/DVD. The reader should then start and auto run.I hope this helps... -
File setupdd.sys could not be loaded
My installation of Windows XP Edition family became damaged and would not start. I inserted the CD original and rebooted. The PC has started from the CD. It was not long before I got this error message:
File setupdd.sys could not be loaded. The error code is 32 768.
Is there something I can do?
You need a Windows XP replacement CD-ROM, looks like your current drive is corrupt.
How to replace Microsoft software
-
"The file 'autorun.dll' could not be loaded or is corrupt.
Original title: autorun.dll could not be found
I'm trying to install Windows starter on my system (net accountant) currently using Windows 7 Ultimate edition. It will not even start the process, which gives me the error message: "the file 'autorun.dll' could not be loaded or is corrupt. Setup cannot continue. Moreover, I found the file autorun.dll 'source' folder However, the installation program is not see it. It is a download, it's a Windows starter.iso file, I try to install the 32-bit version, I had antivirus in my system M.S Essentials, im trying to install from USB key no help?
Hi Praveen,
I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:
1. you are trying to install Windows 7 Starter on another partition?
2. which type of installation you are trying to run?
If you try to install Windows 7 Starter on the same drive where Windows 7 Ultimate is installed, then you must perform a clean installation.
Follow the link for the reference below:
Installation and reinstallation of Windows 7:
http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7
Warning : Before installation, you must be prepared for the worst scenarios that led to your existing data on your computer being removed. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other storage devices before performing a clean install.
I hope that the information above helps you.
-
Not able to install Itunes for my pc windows7 (64 bit) im... Every time I have install I get the message "there is a PROBLEM WITH CE PACKAGE WINDOWS INSTALLER. A DLL REQUIRED FOR THIS FULL INSTALLATION COULD NOT BE EXECUTED. PLEASE CONTACT THE SUPPORT STAFF. "What should I do? I am new to Iphone! If you could help me on this, it would be very appreciated...
aarruunn, you might want to try Windows Installer Cleanup utility.
http://www.MajorGeeks.com/files/details/windows_installer_cleanup_utility.html
-
I am trying to download a WOW patch for my computer. I am using Windows 7 Home premium. I get an error message: "could not initialize storage. You may not be allowed to write on the destination path. "I'm on my admin account, so I should have permission to play where I want to. I did have this problem before with Windows 7. Is this a problem in Windows? Y at - it an easy fix?
Have you tried to manually install the hotfix by clicking on it, and as an administrator?
-
Windows update fails - the file specifies some updates not installed - 9 updates failed, code 80073712 and code 78(f).
The update runs, and then told me that updates failed to install update automatik research, I had more failed updates that havew installed correctly.Hi Ben Dean,
Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file.
To run the System File Checker, follow these steps:
1. Click Start and type cmd in the box start the search.
2. in the area of results, right-click cmd.exe, and then click Run as administrator. You will be asked to type the password for an administrator account. If you are the administrator or type the administrator password, click on continue. Then click on continue.
3. at the command prompt, type Sfc/scannow, and then press ENTER.
For more information, see the following Microsoft article:
This article describes how to use the tool (SFC.exe) System File Checker to fix the system files missing or corrupted on Windows Vista or Windows 7.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833I hope this helps!
Thank you, and in what concerns:
Shalini Surana - Microsoft technical support.
Visit our Microsoft answers feedback Forumand let us know what you think. -
When I insert a compatible game must be installed and the alert arrives to allow another comes in and says "the file 'Localization.xml' could not be loaded."
Hi Scarface0721,
Welcome to Microsoft Answers Forums.
We would like to get a better understanding of this issue, so we can better help not only you but other users with similar problems.
(a) game in which you try to read?
(b) have you been able to install and play the game before?
(c) you are trying to install the game to your computer from the disk or directly trying to play from the disc?
Method 1:
Try to install and play the game in a different computer.Method 2:
Try another disc and verify if you are able to install the game.Method 3:
You can also post your request in the following forums site.http://forums.gamesforwindows.com/
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
My newly purchased and generally fabulous MB Pro has a malfunction in the mail. A partly addressed msg keeps flashing on the screen and I can't remove it. Can I delete the mail and start over?
-
Smart album with face East/includes returns no results
System specifications: 2012, mac Mini, 16 GB RAM, Core i7, El Capitan, Photos v1.3 I recently tried to create a new Smart Album with the following rules: Face is (OR includes) The date is in the range of 01/01/2015 to 31/12/2015 Even though I KNOW th
-
Smart failure hard drive GLHKHH-6AO74G-XD7X1G-6OEWO3 id
help required about this error
-
HP Pavilion 15-e026AX; Missing drivers
Mr. Paul, I need your help. My laptop is HP Pavilion 15-e026AX with the 32-bit version of Windows 8 running on it. When I opened my device manager option, I could see a small yellow triangle next to a machine called a peripheral PCI that signals a dr
-
It is a code of 80070005 error,
I went through the first steps, and they said in this post. Any help would be greatly appreciated. Error opening of HKLM\software\Microsoft\Windows\CurrentVersion\Component database maintenance:Access is denied. No matching items found.