loading paper

Similar Questions

• Loading paper folding in Z for Designjet T1100ps

  Cannot load paper folding in z for HP Designjet T1100ps

  Not an update of the firmware will not help, more research shows that this printer is just not set up for this type of paper.

• 1209: loading paper HP inkjet all-in-one

  I need to know how to load paper in my all-in-one, inkjet 1209.  It was my husbands printer.  He died so I can't ask him.  I tried to find the answer online, but I can't find anything.  I hope someone can help me.

  My condolences on your loss.

  The document here can help to load the paper for your HP PSC 1209.

• HP Officejet Pro 8630: HP Officejet Pro 8630 Setup loading paper

  I have a new HP Officejet Pro 8630. Through the installation process, it is stuck at the loading paper. I loaded the paper in the upper and lower trays. I checked the trays and cartridges are seated well. Clicking next translates into a printer Calibration cycle - then returns to the loading paper. Help! Thank you.

  Hey @Zaldar,

  Welcome to the Forums of HP Support!

  I understand that your Officejet Pro 8630 e-all-in-one printer doesn't detect paper during initialization. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once completed this document explains How to solve problems of choice with your printer. If at this point, you are still unable to initialize the printer, the printer must be replaced. You can contact the HP Support by clicking here and filling out the form below to discuss the options.

  Please let me know if you are able to reach a resolution. If you are, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Message ' load paper ' wrong on Officejet 6500 has more

  I get a message ' load paper ' on my Officejet 6500 has more.  When I first got the printer and installed with my office, it does the same thing, but he stopped after a download from HP.  Today I installed it on my laptop, and now it gives several times the same message despite that I have loaded and reloaded varying amounts of paper.

  Windows 7 64 bit

  Hello

  This article should cover the problem you are experiencing. Give the steps described a shot and tell us if it helps.

  http://goo.GL/NeUWY

  Good luck!

• error to load paper in the tray of the printer

  Although I have a lot of paper in the tray of the printer, my hp c309g-m all-in-one printer screen tells me to load paper, that is, the clip from the sensor to the rear does not work (the one with the Green Strip of rubbery material about it, I guess.) I removed and put it back on a few times, thinking it was wrong set, but it didn't work.  I cleaned the rollers, etc., too.  I try to use the same types of paper, I used for a year without problem.

  I have half of my book printed and don't want to change printers because the quality is not exactly the same thing. so, I would BE ESTATIC IF someone COULD HELP me to SOLVE THIS PRINTER.

  Thank you very much

  You need to contact HP about whether a repair is possible.  It is a hardware problem, not a software problem, and you can do that in Windows can ignore this error.

• Want 5660: How can I load paper 5 x 7 to 5660 want?

  5 x 7 is mentioned in the user manual as one of photo papers suggested.  I bought some, now how I load into the 5660, please?  The photo tray seems to accept only 4 x 6.  Worked great with the paper of the sample that came w/printer.

  Hi @byronw,

  I'd love to help you load paper 5 x 7 in your printer Envy 5660. 5 x 7 is considered more paper, that being said, please, look at what I found in the Manual (p. 11) that I thought would help:

  To load small-size paper

  1. remove the photo tray. If you don't see the photo tray, remove the output tray on the printer.

  2. load paper.

  ● Insert a stack of photo paper into the print photo tray to the bottom side.

  ● slide the photo paper until it stops.

  3 push the photo tray in.

  4. change or keep on the screen of the printer paper settings.

  To load paper large format

  1. remove paper tray, slide the guides to the width of the paper to the outside and then remove any previously loaded media.

  2. load paper.

  ● Insert a stack of paper into the paper tray with the short edge forward and the print down side.

  ● Slide the paper forward until it stops.

  ● Slide the width guides of the paper inward to the stop on the edges of the paper.

  3 push the paper tray in.

  4. change or keep on the screen of the printer paper settings

  I hope this helps. If you need assistance please do not hesitate to let me know!

• There is paper in the tray, but it displays an error message to load paper?

  LaserJet P2055dn

  Windows 7

  Error message: "load paper"... .but there is paper

  Hi lventura0,

  It is a product of the profit margin. For the best answer to your questions, you need to transfer your question at the following links.

  http://h30499.www3.HP.com/T5/business-support-forums/CT-p/business-support

  http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413

• MX432 load paper more

  My MX432 had a jam of paper some time ago and now it seems that it will not load paper unless I push it.

  Hi maidenjane,

  To try to resolve the problem, with a flashlight or other light brilliant, please check the area of the paper feed printer and check that there are no pieces of paper or other obstacles to the printer that can cause the error.  Then, please make a roll of clean the unit by following the steps on the below link:

  PIXMA MX432 cleaning roll

  We recommend that you try at least three cleanings of roll.  If the paper still feeds not correctly, the printer may require maintenance.

  Please call or write to us at one of the methods on the contact us page to get your service options.

• OfficeJet 8620: can not copy, says load paper

  Said the paper loading

  Hey @Cer1260,

  Welcome to the Forums of HP Support!

  I see that you see an error message on your 8620 e-all-in-one printer Officejet to load paper. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done, this document explains How to solve problems of choice with your printer.

  If after the above, that you are still not able to copy, the printer must be replaced. You can contact the HP Support by clicking on this link and fill out the form below to discuss the options based on your warranty.

  Please let me know the results after following the above. If you are able to copy or to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP officejet 4500: error message always saying load paper in paper on hp officejet 4500 using 10 64-bit windows

  I using hp officejet 4500 10 windows, printer. error message saying "load paper in paper," but I have papers

  NEED HELP! IMMEDIATELY

  Hi donj1,

  I have provided the reset of the printer try to please.

  Please take a moment to read the privacy policy of HP to

• HP photosmart d110a printer load paper message demo lights after power to the top

  After changing the black cartridge, when I turn on the printer, it always comes up with the message "loading paper".  There are in the paper machine.  I removed, repositioned, tried different papers, etc.  I have the choice to see the demo or "OK to continue".  Whatever it is, it then puts to the top of the screen, which suggests that I run the alignment process.  It is the only choice.  When I press OK, it now says 'print alignment page' and displays the blue bar pulse, the Red 'X' and the power button flashes, but it remains that way forever.   Oddly enough, I can still print, even when paused trying to print the alignment page.

  Hey there. Try following the steps described in this paper: a "undetected alignment page" or "Cannot be alignment" Message displays on the all-in-one

  Even if the title is not correct for your mistake, it goes through the same troubleshooting steps. Let me know if this is not the problem. If she does not show returns with a new details and we will continue from there.

  Good luck

  Sean

• Error "loading paper".

  I get a message "load paper" on my printer, even if there is paper in the printer! Why?

  Usually caused by a physical problem with the printer, not Windows. Call the mftr printer technical support... MS - MVP - Elephant Boy computers - don't panic!

• Color Laserjet MFP M177fw Pro: MFP M177fw load paper

  printer had a paper jam. the paper has been removed. now the printer load paper

  Hi @ncm1,

  Thanks for getting back to me.

  I have recommended to perform cleanup on the rolls of paper several times, to see if she gets the movement document.

  Make sure that you use the correct paper size and type and that you are not overloading the paper tray.

  Handling - paper Manual

  Entry, standard paper management

  • tray of 150 sheets

  The production of standard paper handling

  • 50 sheets facing the low bin

  Maximum output (leaves) Up to 50 sheets Double-sided printing

  • Manual (Manager for support provided)

  Output over management

  • Offset machine leaves

  Supported media formats

  • Letter, legal, Executive, 4 x 6, 5 x 8 in, 8.5 x 13, envelopes (No. 10, Monarch)

  Support, custom formats 3 x 5 to 8.5 x 14 in Support, custom formats 76 x 127 to 216 x 356 mm Types of media Paper (bond, brochure, colour, glossy, photo, paper, letterhead, plain, preprinted, prepunched, recycled, rough), transparencies, labels, postcards, envelopes Weight, supported 16 to 58 lb. (link) Media weight, ADF support 16 to 24 lb

  If the problem persists, contact HP.

  Contact HP for service in all countries except Asia-Pacific.
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number are displayed.

  Good luck!

• HP ENVY 7640 all-in-one: print envelopes and its telling me to load paper into the photo tray

  I am trying to print envelopes on the HP ENVY 7640 printer and it tells me to load paper into the photo tray. Have you encountered this problem and how to solve? Thank you.

  Hey @cmm3,

  Welcome to the Forums of HP Support!

  I understand that you have a problem when printing envelopes from your Windows 7 computer to your HP ENVY 7640 e-all-in-one printer. I would like to help you today with correct this print error "Photo tray". To start I have to make sure that the envelope is correctly loaded in your troubleshooting paper tray. Once you have confirmed that your envelope is loaded OK we'll take a look at the envelope to print on your computer settings. Can I please you follow the steps below.

  Step 1: Load the paper:

  To begin troubleshooting, please click here. Once the support document opens, please select the drop down list for "load envelopes. Please see the instructions on the screen to ensure that your envelope is correctly loaded in the paper tray. Once you have confirmed that your envelope is loaded correctly, proceed to the next step.

  Step 2: Check the print settings:

  Below I will provide you with instructions for printing envelopes per word. You should use a different program on your computer to print envelopes, please respond to this post with the program that you are using so I can provide specific measures.

  1. Open Word and click mail merge to top
  2. Select "envelopes" in the upper left side
  3. A page of envelopes and labels should now open. Enter your delivery and return address.
  4. Select 'Options' on the lower right
  5. Under the tab 'Options for envelopes' to ensure that your envelope is correctly selected.
  6. Select the 'Print Options' tab at the top. You must now select as appropriate feeding method for your product.
  7. Make sure that you choose the option "Face down".
  8. Also ensure that 'right-hand Rotation' is selected
  9. At the bottom of the window, select the drop-down list of pet food
  10. Make sure that the feeding method is set to main tray rather then select automatically
  11. Press 'OK' and 'Print'.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!