Loading software Canon Pro printer

Have downloaded the installation software (zip file), but when I run (as administrator) it will start and then freeze.  Operating system is Win8.1. Even shut down the firewall. The same problem. Someone at - it the same experience - have a suggestion to circumvent this. Just bought a Pixma Pro 100.  Thank you.

Osprey

You must have the original DVD that came with your camera installed before you can d/l and re - install from Canon.

I don't know why, it's just the way that Canon did it.

Tags: Canon Printer

Similar Questions

  • How can I download canon pro printing studio

    How can I download canon pro printing studio

    Hi davidhauer,

    Canon pro printing Studio is a plugin for Photoshop.

    You should consult the Canon (manufacturer) for this and it must be available on their Web site.

  • Installation of Canon Pro printing Studio

    This isn't a question, but a solution. I was unable to install Canon Print Studio Pro in 2015 CC Lightroom and Photoshop CC 2015. It is was on a desktop of Windows 7 who have Photoshop CS5 installed with Print Studio Pro already added.

    The standalone installation package Print Studio Pro has been able to update the plugin Photoshop CS5, but it also didn't he added to 2015 CC Lightroom and Photoshop CC 2015.

    After exchanging a few emails with the Suport of Canon European team, the solution was as follows

    Select [Print Studio Pro plugin install] in [start] - [Canon Utilities] - [Print Studio Pro], then install the Print Studio Pro plug-in in the following folder:

    [Adobe Photoshop CC 2015: 64 bit OS environment]

    2015\Plug-ins Photoshop CC %ProgramFiles%\Adobe\Adobe

    [Adobe Photoshop Lightroom CC 2015: 64 bit OS environment]

    %UserProfile%\AppData\Roaming\Adobe\Lightroom\Modules

    I hope this can help someone else.

    Hi andybolsover

    Thanks for this information.

    I appreciate really only

    Concerning

    Jitendra

  • El Capitan is my printer Canon Pro 100 'not connected' say any difficulty?

    El Capitan is my printer Canon Pro 100 'not connected' say any difficulty?

    Open Printers & Scanners, select the Pro 100 and remove it from the list of printers by clicking the button "-". Then click on the button "+" to add the Pro 100 again.

    If wrong you again then try to print a reset of the print system. Note This action will remove all devices breeders & Scanners, but not supported drivers, so you just need to add the printer again. To reset the printing system, open Printers & Scanners and rest the mouse pointer over the list of printers. Then right click on (or hold down the command key, then) and select Reset from the context menu that appears. You will be asked to enter your password for the process to continue.

  • How can I get the software of the printer Canon - MG6170?

    How can I get the software of the printer Canon - MG6170?

    I can't fing it in the Canon Web Site.

    Help, please!

    I can only find it on non-English language Canon websites such as Taiwan and Hong Kong. You may need to use an online translator to find the drivers you need (assuming that they exist for your version of Windows).

  • Error code 101-752 dotnet framework error, problems to load the new software of the printer

    Error code 101-752 dotnet framework error, problems to load the new software of the printer

    Hello

    (1) have you made changes before the start of this issue?

    (2) when you get the error message?

    (3) is the specific question of the installation of the printer software?

    (4) what is the brand and model of the printer?

    It seems that you need to fix .net Framework installed on the computer. Follow this link and see if it helps.

    Fix the .net Framework installation

    http://support.Microsoft.com/kb/976982/en-us

    Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756 /) how to back up and restore the registry in Windows

    See also:

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    Let us know if that helps.

  • MS refuses to load software for printer Plug & Play, [Kodak ESP7] and Viewsonic monitor. MS = not signed?

    Recently, MS windos XP sp3 fails to recognize the common plug & play devices.  Says error message "software not signed" then demand load anyway?... I say yes, but the charger just an infinite loop, preventing the drivers to load.

    MS refuses to load software for printer Plug & Play, [Kodak ESP7] and Viewsonic monitor. MS = unsigned.  Was the load ok previously.

    This is how I have to upgrade?  I have five computers and two are 98 and 95 for some software.  That line.  TonyR

    The signed data are perhaps crushed or damaged on the HARD drive.

    Hello

    See this Microsoft KB article and check if that helps.

    How to troubleshoot unknown devices listed in Device Manager in Windows XP

    http://support.Microsoft.com/kb/314464

    When you install a device driver and Windows detects that it is not digitally signed, you receive a warning message and the option to cancel or continue the installation this message only appears if your computer is configured to display a warning message whenever an installation program attempts to install a device without a digital signature driver.

    Note A device driver is signed digitally can still be listed as an unknown device in Device Manager.

    For more information about driver signing for Windows, see the Microsoft Web site at the following address:

    http://www.Microsoft.com/whdc/devtools/ddk/default.mspx

  • Color Management Confusion - Canon PRO 1000 printer

    Users of Photoshop CC out there working with PRO-1000 printer from Canon?

    Obviously, I should have a handle on my colors, but despite the download management workflow and by applying the right profiles of icc for the documents, have a calibrated EIZO monitor, the colors are downright bad and inconsistent at best.

    The dilemma:

    In my printer set up, I have a color management options) let the printer manage colors, or b) let Photoshop manage colors.

    The big problem I have with the PS, it is that if I let Photoshop manage colors (what I want), I get a warning that says "Please use Adobe Color Printer Utility If you need to print with no color management.

    printer setup.jpg

    There are already 2 problems with this:

    1. I DON'T want to print with color management

    2. the utility of Adobe Color printer not only is not manage the colors, it is apparently not yet supported by Photoshop CC, that was told to me through some Adobe support chat. The utility itself seems pretty useless.

    The question becomes HOW am I supposed TO MANAGE COLOR using the CANON PRO 1000 with ADOBE CC?

    With an exhibition that I'm supposed to be set up in less than a week and no Adobe or Canon support site, I passed the point of despair and entry in full-on panic. Someone please help! Thank you.

    In fact, there is no much to experiment. If Canon profiles are good, and there is no reason to think that they are not, there is only one way to do it:

    • The document in a standard color space
    • Photoshop manages color (if ensure that color management turned off the coast in the printer driver, you don't want the color management double)
    • Choose the right profile for your paper in the PS print dialog box
    • Also choose the type of media in the printer driver to set the total amount of ink

    The printer driver is that you get to when you click on 'Properties' in the dialog box print in Photoshop.

    There's a review here, separated what corresponds to your objectives of calibration of monitor the density of white ink and paper max (this is to monitor the white and black points). If you get prints that are too dark, your screen is too bright. Not the other way around.

  • Canon Pro 100 printer - worth getting?

    Hello!  I have a chance to buy a printer Canon Pro 100 for a good price, but I was wondering how a printer it is.  People have good success with soft-proof-to-print quality?

    I'm better off to just use the icc profile of a laboratory for their printer/paper and send it to them for printing?

    Thank you!

    I had my Canon Pixma Pro-100 now for a few years. What is a print quality, I think it is excellent. Note that it is an ink system die. Some people warn that the prints will not last as long. Pigments based systems reportedly produce impressions of longer duration. Personally, I don't mind it because I don't print that much. I had prints now posted on my wall for a couple of years and have seen no noticeable change in them.

    The other concern is whether or not you think you are going to print your own in order to save money. Many people refill their cartridges, which significantly reduces the cost of printing. I don't post enough to worry about the cost of ink, so I continued using OEM cartridges. It's really much cheaper to have your prints made by a reputable lab, even if you print a lot.

    Thus comes down to whether or not you really want to print, and what you want to accomplish. If you want just the experience to complete the process of a House, the Canon Pixma Pro-100 is a very good printer in my opinion. I used a number of different papers of the Red River. They provide profiles for all their papers and impressions fit very well. I have no problem with the printer.

  • 5 Lightroom, printing of blank pages on Canon Pro 9500 Mark II

    I tried to print 4 x 6 on a 9500 MkII photos. Everything looks good in printing configuration. I chose the right paper size (4 x 6 borderless), I'm going to send the job to the printer and I can hear the printhead come and go, but when the paper comes out it is blank.

    Anything obvious, I'm missing here?

    Here is my setup...

    Mac OS 10.11 (El Capitan)

    5.7 Lightroom

    Canon Pro 9500 Mark II

    Thanks for your help!

    Ted

    Hi tedvieira,

    Please follow the steps below:

    > Trying to print PDFS from Lightroom and see if it prints.

    > Check the selected paper type and profile of the printer used.

    If you get fine PDF printing, please uninstall the printer drivers.

    Download and reinstall the printer driver updated.

    Click on the link to add the printer to Lightroom: using Adobe Photoshop Lightroom | The print module basics

    I hope this helps.

    ~ UL

  • Canon Pro 9000 MKII printing problem

    When I try to make a 5 "X 7 print with Photoshop CC (towards 2015.0.1) using my Canon Pro 9000 MKII I get an error 1062 say printer the paper width is set to false (it is not)." The printer prints, paper and fine same photo using Lightroom.  My computer is the retina 5K of Mac with OS X Yosemite 10.10.5.

    Hi Jermer073,

    Well this will be the key to the space bar on the keyboard. Press and hold down the SPACEBAR when you click Print on the file menu.

    Thank you

  • Printing to a Canon pro 9000 mark ii produce cloud creatives

    I use Windows 8 and I am trying to print on a Canon pro 9000 ii printer Mk of Photoshop, Illustrator and InDesign. I am a user of creative cloud of registry and have the latest drivers for the printer. I use official Canon papers and inks. I can't get color to print properly, the colors are too dark with a blue cast, I recently changed this printer to an old 1290 Epson with a reproduction of the colors well (for his age and that it was just a system of two cartridges). At first, I thought it was a problem with the printer, but after printing with several other programs I realized that it is an adobe problem exclusively!

    Someone at - it an idea of what I am doing wrong or if there is a way to get adobe products to play well with the printer?

    Thank you in advance,

    Jeremy

    First of all, the functionality of the product remains the same, that installed Adobe Cloud or as a perpetual product. In other words, there is no difference in functionality on the product except the additional functions that are provided to users of clouds.

    Now, since you mentioned that your old printer works very well with applications like Photoshop adobe, InDesign & Illustrator, then it might be a problem with the pro 9000 Canon that you use. Could be a problem with the printer drivers. You may need to check this. If possible, contact Canon to the same and ask them to provide correct printer profiles and update printer drivers.

  • CS5 crashes when I try to load "other profiles" when printing

    I use a Canon Pro 9000 printer. I read somewhere that you cannot disable printer manages colors however if you choose printer manages colors, then Color Matching (verified ColorSync) and load then you're your ICC that it will match. I see the profiles of Canon, and then in low "other profiles". As I Red River profiles I want to load one every time I'm falling down and select "Other profiles" CS5 crashes.

    In the printer driver, there should be a framework for the management of colors - make "No. color adjustment.

    But even once, recent printer drivers should not have this problem.

  • How can I activate print double-sided on my Canon MG6350 printer

    How can I activate print double-sided on my Canon MG6350 printer

    I go to the website of canons and get their driver and check their software if the printer is supported and he supported printing double-sided on OS X, it would have parameters in their software in system preferences

  • Color Laserjet M252N: HP Color Laserjet Pro printer M252N for Windows XP Embedded Standard.

    I can't install the driver HP Color Laserjet Pro printer M252N to my machine (OS: Win XP Embedded Std version) without an internet connection.

    1 error message are requested in advance for MS .net framework 3.5. (after that, I download and installed: NETCFSetupv35.msi)

    I found the name of the printer in the list of drivers, but then I try to add a new printer with this driver, the pop-up error message and the installation is not complete.

    My question is: the HP Color Laserjet Pro printer M252N are not compatible with Win XP Embedded Std?

    Please help, even the HP sales technician unable to answer me to this questation.

    Hello

    The HP Color Laserjet Pro M252N Featuer software complete is not supported on Windows XP, however you can get the features of the printer using HP PCL 6 Universal Print Driver listed on page 9 of the User Guide, be aware that the Service Pack 3 must be installed on the operating system to use the printer:

    Make a right click my computer and select Properties - locate Service Pack 3 in this form... If Service Pack 3 is not the operating system MUST be updated first:

    http://h10032.www1.HP.com/CTG/manual/c04475955

    You can download the HP Universal Print Driver below:

    http://ftp.HP.com/pub/softlib/software13/COL39348/LJ-95977-14/UPD-PCL6-x32-6.2.1.20636.exe

    As Windows Embedded edition is an edition of the customized version no official support is guaranteed.

    It is a customized operating system version includes only the components of the operating system selected for specific needs.

    Those selected by the OEM computer and not necessarily include any component required by the HP software or hardware.

    Try to install the printer and see if this can work, however it can work as explained and may not only the manufacturer of the computer can respond if such material can be installed on the operating system or not...

    Kind regards

    Shlomi

Maybe you are looking for

  • Need a card system for Satellite Pro M40

    Hi, does anyone have a system M40/motherboard for sale in working condition known? I am a repair engineer and have already bought 2 boards on eBay, but they arrived does not. My client has a need urgent sound M40 back up and running. Thank you, Phil

  • dual-boot 10.8 and 10.11

    Hello people - I'm running a MBPro 2011 currently dual booting OS 10.6 and 10.8.  I use my computer professionally and need to stay in the sweet spot for a variety of programs that don't play well with the latest and great artist OS versions.  The ne

  • HP 5510 Photosmart e-All-in-one printer will be no. Longer Print black

    I have a Photosmart HP 5510 e-All-in-one printer and after replacement of a black cartridge empty with a new, the printer will print is darker. I tried all the solutions on HP Support forum. I have inserted a new black HP (not a photo black) cartridg

  • wrap a vi with indicators in a stand-alone block

    I am a rookie in Labview, so this may be a common problem with the rookie.  However, I asked this question to more experienced Labview users and left without solution.  This post is a little long and it actually contains 2 little issues - apologies.

  • Spare propeller Stylus/pen ball

    I just got my Helix in yesterday and I'm still getting used to it. This is my first laptop with an active digitizer and I got it specifically for sketching and drawing. One thing I was wondering is if I can buy a 3rd party/stylus that is bigger and e