loading windows 7 on hp pavilion a810n feasibility

Similar Questions

• loading windows 7 on hp pavilion a810n feasibility - need to reply to the questions in the thread

  I got 1 response to my initial questions but I also followed questions that I have not received help with.   Also, here is the latest news.  I updated my old hp pavilion a810n 7 Edition windows xp home premium today.  Device Manager shows yellow exclamation points on ethernet controller and multimedia audio controller.  I ensure that I can't connect to internet because of these problems.  These two are fixed if I get some new material.  I gave the link, but I'm confused by all the different types of shows.   Please look at the thread and help me determine what I need and what should be the specifications so I can order the good part.  I'm new to this so any help would be greatly appreciated.

  Hello:

  I think you can use this audio driver.

  Audio: Accept the contract, download, unzip and install the driver first on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=23&PFID=23&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  Ethernet: Try the file 6th on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=6&level=5&Conn=4&DownTypeID=3&GETDOWN=false

• Pavilion dv7 - 4153cl: Pavilion dv7 - 4153cl replacement HD not recognized when loading windows

  I bought a replacement HD for my Pavilion dv7 - 4153cl and loading windows, I need to load the driver (I guess that a driver IDE or SATA).  It throws an error saying no compatible device not found driver (I can get exact error if necessary).  I went on HP website, downloaded 2 bios drivers, Bios tools, and storage driver.  What is an exe, I ran and then copied the directory created on a CD.

  I point to the CD and still unable to find the device driver.

  Any ideas?

  Record HD:
  Western Digital laptop bare drives 500 GB WD Blue SATA III 5400 RPM 8 MB Cache Bulk/OEM hard drive WD5000LPVX

  If another HD is required, no problem.  If it is a driver problem, a pointer in the right direction would be helpful.

  Thank you

  Ed

  If you are prompted for a driver to support the hard drive during the installation of Windows? It's because the Manager of storage on this laptop isn't RAID, AHCI and Windows 7 isn't this RAID driver available on the installation disc. But fear not only intel makes the driver available here:

  https://Downloadcenter.Intel.com/download/24779/Intel-rapid-storage-technology-Intel-RST-RAID-driver

  You need the F6 driver for 32 or 64 bit one correct installation that you do.  If 64-bit, you must f6flpy-x 64.zip. These are compressed files (.zip). Download the .zip to a different computer and extract the .zip to a USB key and when you reach him point the Windows installation when it is asked for a driver, navigate to the location where the files were extracted from the thumb drive. This should allow you to proceed with the Windows installation.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• New Pavilion g7-2220 will not load Windows to start-up

  Hello

  I just bought a new Pavilion g7-2220 and am just finishing the initial commissioning.  All registration modules and guests of live recording of MS are fine, but then the computer will not load Windows.  He explains in brief it is impossible to load Windows from the hard drive in a small dialogue window, then restarts and brings back me guests for the first time again.  It is supposed to be preloaded with Windows 8.

  Any help would be appreciated.  Again, this computer is brand new.

  Thank you.

  Hey Shannon3363,

  I'm very sorry to hear that you are having problems of this kind out of the box. The first option, I'd watch is an Exchange. If this is not a viable option, you can reset the operating system. This is a very simple process.

  1. prior to turn on/off the laptop, press in and hold the escape key

  2. press the power button as usual to start and hold down ESC until you see the Menu Start Up

  3. on the Start Menu, press F11 to go in Recovery Manager

  4. choose your keyboard

  5. click on troubleshoot

  6. click on reset your PC

  7. select just delete my files

  Leave about 30-45 minutes for the reset is complete. If you're still having problems with this load Windows normally, please let me know. Once again I aplogize for the inconvenience. Depending on where you have, there could be several reasons so that he can behave in this way. If you've got it to a brick and mortar store, technicians will provide implementation services and anything can happen during this period. I'll keep an eye out for your answer!

• Pavilion a810n drivers for Windows 7

  I wanted to upgrade to Windows 7, but after the installation of the OS, I am unable to find drivers for Audio, video and NIC.

  HP support site lists only Windows XP drivers and even then no video driver and NIC is present.

  Please let me know where I can find drivers for Windows 7 for Pavilion a810n desktop PC.

  Thank you!

  Hello:

  I do not think that the graphics card in this model can run windows 7, so you won't find any graphics driver that works.

  Once you're connected to the internet, try the automatic update of the video controller driver and see if Windows Update can't find something.

  Here are links to the audio and network drivers you need.

  Audio: Accept the contract, unzip and install the driver first on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=23&PFID=23&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  Network: a 6th on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=6&level=5&Conn=4&DownTypeID=3&GETDOWN=false

• E9 error loading windows 7 new hard drive

  Am having a problem of loading Windows 7 on a HP Pavilion p6241f. I tried using recovery software that was created by the local store here and when it doesn't work, I borrowed a copy of Windows 7 Home premium from a friend. During the first boot of windows, the software times out with an error E9.

  The original software recovery disk only arrives at 8%, then stays there. In an effort to solve the problems, I downloaded the cyberlink "fix" (from this website) and created the CD, this update was for arising problems while performing a system restore, but that did not fix my problem and so... I decided to borrow the copy of windows 7 Home premium.

  If I'm stuck with a boat anchor? I don't really want to bring it to HP for repair! Any help would be appreciated!

  Thank you

  Hello

  Your PC model number was first delivered in 2009.  The COA PC is Win 7 64 bit or are you referring to the COA for the Win 7 install disc?

  HP recovery disks are generally reluctant to HARD drive smaller than what has been delivered with the PC. It is from your PC, comes with a 1 TB HARD drive. Thus the recovery disks created by the repair shop should work on a 1 TB HARD drive, unless they are defective.

  Is the advanced format HDD 1 TB HARD drive? I think that previous versions of HP Win 7 recovery disks will not work on an advanced format HDD.

  You can order a set of recovery discs here. Or you could try to download the right version of Win 7 SP1 Refresh of ISO media here, burn it to disc and try to reinstall Win 7 64 bit with the disc. You should be able to activate Windows 7 using the certificate of Authenticity affixed to your PC.

  You may also have a problem with the SATA controller on the motherboard or it could be a problem with the SATA port you use. Try another SATA cable and connect it to another motherboard SATA port.

  Is- this utility from Cyberlink you tried to use it with the HP recovery discs?

  I'm out of ideas. Maybe another more knowledgeable forum member has some additional thoughts.

  Jaco

• After loading Windows - crashes BSOD on Portege A200

  Portege A200 Windows XP;

  Before windows has finished loading a blue screen appears and the machine stops. Prior to that, the machine was intermittenlty off without apparent reason. The last thing I did before this happened has been updated to IE 7. Ran scandisk, but has not fixed anything.

  Can start in safe mode but impossible to uninstall IE7 in safe mode. The option selected to load windows last config that worked to option, but windows crashes before the end of loading. Restoration of the system to consider the return to January 08 but still the same problem.

  Any advice would be appreciated.

  In this case, I would recommend do you a clean installation of OS. As you can see that nothing done. I don't really know what you can try, but I really don't think that you will be able to do anything.

  Save all your data important and make the clean OS installation. I know it's quite radical solution but, believe me, one that suits.

• Satellite L300 laptop will not load Windows

  I have a model of Satellite L300 number PSLB0A - 00L 022 running windows Vista.

  The problem is that it does not load Windows. It starts ok and I can access the boot manager and the Setup utility and that's it. It stops just loading.
  After studying the problem, I ran a car aptitude test and the result was the error code 0 x 70. After looking at the code I m under the impression that I need to erase the disc. I have no problem with that.

  My question is - if I run the windows Recovery Wizard will be it solve my problem? I will have to re install vista at all? All advice is appreciated!

  Hello Jane and welcome in the Toshiba forum

  After reading your ad, I must say that the best solution and easier for you is to reinstall the operating system via original Toshiba recovery DVD. This DVD contains the operating system, all necessary drivers, specific Toshiba and utility tools. After recovery image installation you will get state out-of-box and clean the preinstalled operating system.

  Yes, this should solve your problem. Please note: when you do it all saved data will be deleted.

  You have some important data saved on your laptop?
  Do not use this disc reinstall Vista and everything should be ok again.

• I need to display a corporate tutorial site which is only supported by Microsoft Windows.  Is it possible to load windows on an external hard drive and a MacBook to view the Web site?

  I need to post a tutorial for some training company corporate site only supports Microsoft Windows.  I'll buy a MacBook in the coming weeks when I go to training and I wonder if there is a way to load windows on an external drive and launch it on my MacBook?  I know you can use bootcamp, but I don't want to burn up that much of my Flash memory by placing it on the MacBook itself.  I have a 1 to Seagate that I use on my iMac at home for Time Machine.  Could just operate with Windows on it to visit the society tutorial with my MacBook?

  Boot Camp will not allow that.

  It is possible that one of the many emulators Windows for Mac can allow you to run with such a disk configuration.

• Blue Screen of death - now cannot load Windows (even in safe mode)

  Laptop last night (Satellite L500-19Z;) Win 7 64 bit) crashed while playing CIV4. Had a blue screen of death. before I had the chance to read one of the error messages about the computer restarted.

  It loaded windows in SafeMode very well then and informed me that he had loaded OK the problem safe mode will be linked to some recently installed software and I should uninstall programs I had installed until it loads normally. As it was late last night I closed and thought I would sort the morning (with the benefit of hindsight it may have been a mistake...).

  Today, when the computer tries to start, it tries a startup repair; Unfortunately it does not work every time and it says "Startup Repair tried several times but still cannot determine the cause of the problem"

  I looked at the paper it produces, but it passes all of the individual tests.

  I can't access also advanced recovery options system & support, that appears in the Startup Repair dialog box as it requires that I be connected, which apparently I am not (probably the machine never got to the windows screen connection before attempting repair system). The error message reads "you must be logged to access system recovery options. If you encounter problems to connect, please contact your computer administrator for help. Please click OK to restart the computer. »

  I had a go at the start in the advanced options (safe mode, safe mode with command etc., but the result is the same).

  I also tried the repair of your computer to the screen option options advanced boot, but after the screen where it asks you to choose the language and keyboard, I get the same error of connection mentioned above.

  Is it possible to repair or even run windows based hard drive recovery (do not have the DVD of recovery with me as I'm away from home for a few weeks) without connecting to windows? I expected here, but have not yet find a way to do it.

  (there is no disc in the disc drive, no other devices connected to the laptop - I tried with power outlet and the battery and have not noticed differences)

  Thank you
  James

  Hello

  Pitty, you cannot retrieve the HEXADECIMAL code
  On this side, I think that your HD or registry is damaged and you have to reinstall the entire system

  Good luck

  Post edited by: Praepositus

• Satellite 1410 801 stops loading Windows - corrupt files

  For several months I have problems at the start of my laptop: it will restart several times, stop to perform the will of loading windows; Sometimes I get start of message (registry) files are corrupted etc. In most cases, it will start after several tests correctly. I already reinstalled (clean disk) made several memory and disc of the controls without any error message. What can be the reason for this problem?

  I intend to replace the memory card or HARD drive BUT if this should solve the problem. Can someone give some advice or tips?

  Hello

  On this path, it is not easy to give a correct diagnosis. If the problem persists after the installation of clean operating system, in my opinion, you should check HARD drive first (upgrades and hope that other hardware components are original without).

  Try to get another HARD drive, Exchange and install the OS by using recovery media. In my opinion, it should be the first step.

• Re: Satellite L670D does not load windows

  Hi, I have a toshiba L670D, who recently had a windows update and since then, every time I try to turn it on will not load windows, but just comes up with the error "error fatal c0000034 application update operation 207 0f 102311 (_00000...)"

  Is there anyway I can fix it myself or is it a case of calling an expert or even go shopping for a new?

  Try to start Windows in safe mode and try to roll back OS to an earlier time using System Restore tool.

  Please post comments.

• HP PAVILION: / WIFI AND BLUTOOTH BOTTON/ICON IF POSTER NOT IN PC SETTING (CONNECTION) IN WINDOWS 8.1 HP PAVILION

  WIRELESS CONNECTION - WI/FI AND BLUTOOTH BOTTON/ICON IF POSTER NOT IN PC SETTING (CONNECTION) IN WINDOWS 8.1 HP PAVILION.

  THE SCREEN ALSO SHOWS

  PC SETTINGS > CONNECTION >... HE DIDN'T THERE WAS NO WIRELESS OPTION ON THE SCREEN... ALSO

  PC SETTINGS > CONNECTION > AIRPLAN MODE > WI - FI > WE WOULD NOT FIND ANY WIRELESS DEVICE...

  PLEASE SOLVE THIS PROBLEM

  Fortunately, I solved this issue yesterday... see below

  1. the ralink WiFi Adaper uninstalled form Device Manager

  Device Manager > network adapter > Ralink WiFi adaper > right click > uninstall

  2. download the Letest update to HP Support Assistant ralink Wi - Fi adapter

  3 installed 'last version of the Ralink wi - fi adapter' that we have download

  4. After successful installation, restart the computer

  5. change the setting of PC > connection... you can see on screen wireless Wi - Fi icon!

  But... I still have the problem with Bluetooth as

  Bluetooth icon not show in anywere in the laptop screen

  I check... Device Manager as

  Device Manager > Blutooth > I see Bluetooth yellow with trialngle symbol with. sign

  Please solve problem of Blutooth...

  Help me

• Satellite L40-170 - cannot access the parition of disc to load Windows XP Home edition

  I downloaded Intel storage disk manager 32 bit on my flash. I hit F6 again to load Windows XP Home edition, but it tells me that the startup of Windows XP Home edition program is impossible to access the disk containing the partition.
  What software do I need?

  Hello

  This will help your for sure:

  [How to integrate a SATA AHCI driver into a Windows XP installation CD | http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm]

  Check this doc from Toshiba and post feedback after installing the SATA driver.

  Concerning

• Lenovo battery Z50 - 70 does not load Windows 8% 10

  Hi lenovo Z50-70 battery does not load Windows 8% 10

  I uninstalled the old Yang APP and reinstalled this

  were of no irrelevance that even once and adde the application in the windows store "parameters of Lenovo.

  And it does not load beond 8%

  A have you tried a new charger did not help

  text is pretty funny to 8% and 2 min at full load :-)

  Try opening the energy manager and click on settings, click on conservation mode to turn it off, then unplug the power cord and plug it back again and you should see the battery load again.