loading windows 7 on windows 8

Similar Questions

• After loading Windows - crashes BSOD on Portege A200

  Portege A200 Windows XP;

  Before windows has finished loading a blue screen appears and the machine stops. Prior to that, the machine was intermittenlty off without apparent reason. The last thing I did before this happened has been updated to IE 7. Ran scandisk, but has not fixed anything.

  Can start in safe mode but impossible to uninstall IE7 in safe mode. The option selected to load windows last config that worked to option, but windows crashes before the end of loading. Restoration of the system to consider the return to January 08 but still the same problem.

  Any advice would be appreciated.

  In this case, I would recommend do you a clean installation of OS. As you can see that nothing done. I don't really know what you can try, but I really don't think that you will be able to do anything.

  Save all your data important and make the clean OS installation. I know it's quite radical solution but, believe me, one that suits.

• Satellite L300 laptop will not load Windows

  I have a model of Satellite L300 number PSLB0A - 00L 022 running windows Vista.

  The problem is that it does not load Windows. It starts ok and I can access the boot manager and the Setup utility and that's it. It stops just loading.
  After studying the problem, I ran a car aptitude test and the result was the error code 0 x 70. After looking at the code I m under the impression that I need to erase the disc. I have no problem with that.

  My question is - if I run the windows Recovery Wizard will be it solve my problem? I will have to re install vista at all? All advice is appreciated!

  Hello Jane and welcome in the Toshiba forum

  After reading your ad, I must say that the best solution and easier for you is to reinstall the operating system via original Toshiba recovery DVD. This DVD contains the operating system, all necessary drivers, specific Toshiba and utility tools. After recovery image installation you will get state out-of-box and clean the preinstalled operating system.

  Yes, this should solve your problem. Please note: when you do it all saved data will be deleted.

  You have some important data saved on your laptop?
  Do not use this disc reinstall Vista and everything should be ok again.

• I need to display a corporate tutorial site which is only supported by Microsoft Windows.  Is it possible to load windows on an external hard drive and a MacBook to view the Web site?

  I need to post a tutorial for some training company corporate site only supports Microsoft Windows.  I'll buy a MacBook in the coming weeks when I go to training and I wonder if there is a way to load windows on an external drive and launch it on my MacBook?  I know you can use bootcamp, but I don't want to burn up that much of my Flash memory by placing it on the MacBook itself.  I have a 1 to Seagate that I use on my iMac at home for Time Machine.  Could just operate with Windows on it to visit the society tutorial with my MacBook?

  Boot Camp will not allow that.

  It is possible that one of the many emulators Windows for Mac can allow you to run with such a disk configuration.

• Blue Screen of death - now cannot load Windows (even in safe mode)

  Laptop last night (Satellite L500-19Z;) Win 7 64 bit) crashed while playing CIV4. Had a blue screen of death. before I had the chance to read one of the error messages about the computer restarted.

  It loaded windows in SafeMode very well then and informed me that he had loaded OK the problem safe mode will be linked to some recently installed software and I should uninstall programs I had installed until it loads normally. As it was late last night I closed and thought I would sort the morning (with the benefit of hindsight it may have been a mistake...).

  Today, when the computer tries to start, it tries a startup repair; Unfortunately it does not work every time and it says "Startup Repair tried several times but still cannot determine the cause of the problem"

  I looked at the paper it produces, but it passes all of the individual tests.

  I can't access also advanced recovery options system & support, that appears in the Startup Repair dialog box as it requires that I be connected, which apparently I am not (probably the machine never got to the windows screen connection before attempting repair system). The error message reads "you must be logged to access system recovery options. If you encounter problems to connect, please contact your computer administrator for help. Please click OK to restart the computer. »

  I had a go at the start in the advanced options (safe mode, safe mode with command etc., but the result is the same).

  I also tried the repair of your computer to the screen option options advanced boot, but after the screen where it asks you to choose the language and keyboard, I get the same error of connection mentioned above.

  Is it possible to repair or even run windows based hard drive recovery (do not have the DVD of recovery with me as I'm away from home for a few weeks) without connecting to windows? I expected here, but have not yet find a way to do it.

  (there is no disc in the disc drive, no other devices connected to the laptop - I tried with power outlet and the battery and have not noticed differences)

  Thank you
  James

  Hello

  Pitty, you cannot retrieve the HEXADECIMAL code
  On this side, I think that your HD or registry is damaged and you have to reinstall the entire system

  Good luck

  Post edited by: Praepositus

• Satellite 1410 801 stops loading Windows - corrupt files

  For several months I have problems at the start of my laptop: it will restart several times, stop to perform the will of loading windows; Sometimes I get start of message (registry) files are corrupted etc. In most cases, it will start after several tests correctly. I already reinstalled (clean disk) made several memory and disc of the controls without any error message. What can be the reason for this problem?

  I intend to replace the memory card or HARD drive BUT if this should solve the problem. Can someone give some advice or tips?

  Hello

  On this path, it is not easy to give a correct diagnosis. If the problem persists after the installation of clean operating system, in my opinion, you should check HARD drive first (upgrades and hope that other hardware components are original without).

  Try to get another HARD drive, Exchange and install the OS by using recovery media. In my opinion, it should be the first step.

• Re: Satellite L670D does not load windows

  Hi, I have a toshiba L670D, who recently had a windows update and since then, every time I try to turn it on will not load windows, but just comes up with the error "error fatal c0000034 application update operation 207 0f 102311 (_00000...)"

  Is there anyway I can fix it myself or is it a case of calling an expert or even go shopping for a new?

  Try to start Windows in safe mode and try to roll back OS to an earlier time using System Restore tool.

  Please post comments.

• Satellite L40-170 - cannot access the parition of disc to load Windows XP Home edition

  I downloaded Intel storage disk manager 32 bit on my flash. I hit F6 again to load Windows XP Home edition, but it tells me that the startup of Windows XP Home edition program is impossible to access the disk containing the partition.
  What software do I need?

  Hello

  This will help your for sure:

  [How to integrate a SATA AHCI driver into a Windows XP installation CD | http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm]

  Check this doc from Toshiba and post feedback after installing the SATA driver.

  Concerning

• Lenovo battery Z50 - 70 does not load Windows 8% 10

  Hi lenovo Z50-70 battery does not load Windows 8% 10

  I uninstalled the old Yang APP and reinstalled this

  were of no irrelevance that even once and adde the application in the windows store "parameters of Lenovo.

  And it does not load beond 8%

  A have you tried a new charger did not help

  text is pretty funny to 8% and 2 min at full load :-)

  Try opening the energy manager and click on settings, click on conservation mode to turn it off, then unplug the power cord and plug it back again and you should see the battery load again.

• How to load Windows "On-screen keyboard" application using LabVIEW

  Hello

  If someone can tell me how to load windows "On-screen keyboard" application using LabVIEW.

  Kind regards

  Bharath

  
  

• After recommending the bios update, hp dv6131od running xp pro sp3 will not load windows - is there a wa

  After installing an update of the bios recommended on the hp website my dv6131od running xp pro sp3 will not load windows

  Update does not seem to have problems - failure, lack of time for flash, backup, etc.

  boot sequence seems normal (finds it a bootable cd in the drive, etc.), but windows won't load in safe or other mode

  next steps?  is there a way to access the BIOS?

  Thank you

  There is a simple solution to this problem.  The HP Online Crash Analysis Team has finally responded to my email after 34 days.  I had given up hearing from them despite several requests to repeat.

  I had completely disassembled the laptop trying to find the bios setting the jumpers on the motherboard in response to an idea contained in one of the PM, I sent... all to nothing does not...

  OCAT told me to look in the BIOS under "system configuration" for the Native SATA support.  The last update of the BIOS resets this point 'activated', but that only works for Vista & Win 7.  This must be set to "disabled" for XP and previous operating system.

  I hope that this post will save someone having to wait 5 weeks invest hours of work for a solution that took 3 minutes!

• Pavilion dv7 - 4153cl: Pavilion dv7 - 4153cl replacement HD not recognized when loading windows

  I bought a replacement HD for my Pavilion dv7 - 4153cl and loading windows, I need to load the driver (I guess that a driver IDE or SATA).  It throws an error saying no compatible device not found driver (I can get exact error if necessary).  I went on HP website, downloaded 2 bios drivers, Bios tools, and storage driver.  What is an exe, I ran and then copied the directory created on a CD.

  I point to the CD and still unable to find the device driver.

  Any ideas?

  Record HD:
  Western Digital laptop bare drives 500 GB WD Blue SATA III 5400 RPM 8 MB Cache Bulk/OEM hard drive WD5000LPVX

  If another HD is required, no problem.  If it is a driver problem, a pointer in the right direction would be helpful.

  Thank you

  Ed

  If you are prompted for a driver to support the hard drive during the installation of Windows? It's because the Manager of storage on this laptop isn't RAID, AHCI and Windows 7 isn't this RAID driver available on the installation disc. But fear not only intel makes the driver available here:

  https://Downloadcenter.Intel.com/download/24779/Intel-rapid-storage-technology-Intel-RST-RAID-driver

  You need the F6 driver for 32 or 64 bit one correct installation that you do.  If 64-bit, you must f6flpy-x 64.zip. These are compressed files (.zip). Download the .zip to a different computer and extract the .zip to a USB key and when you reach him point the Windows installation when it is asked for a driver, navigate to the location where the files were extracted from the thumb drive. This should allow you to proceed with the Windows installation.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Help, please! computer HP laptop g72 does not load windows

  I can't get my laptop to initialize. I was it clean and running virus/spyware scans when it overheated and judgment (something he seems to do more in more often lately), I came back to the room to check on it and he stopped. He gave me the usual message about how he had disappeared in hibernation because the internal temperature exceeded blah blah blah (don't remember exactly what he said, but it wasn't the basics of it) now normally at this stage it will restart and be well and I can continue with what I was doing before. However this time it will not go beyond the second screen. It's what he does... (I will include the information in the end system)

  I press the power button then screen shows the following

  1 HP screen of the logo with the message "Press ESC for Boot Menu" at the bottom left then flashes to the next screen.

  2. starting Acronis Loader...
  Press F11 for Acronis Startup Recovery Manager... (horizontal cursor flashing after...) then flashes to view the first screen again

  and this process is repeated again and again until I got disabling or press ESC to #1 screen or F11 to the screen #2 how it will load either the menu start screen where I can access info sys diagnotics, BIOS or system recovery system.  or Acronis where I can make backup dics or start the Recovery Manager (who I'm trying to deal with the system if that is possible at this time because there are pictures and things on the hard drive that I want not deleted if it can be avoided)

  the process is normal to start but after #2 it should be blank with blinking cursor and then begin loading windows... I cannot at this point. He repeates just the first two times, I let it run for about 10 minutes at a time to see if she would do anything else, and it won't.

  System info-

  portable mode: HP G72 notebook PC (not sure what particular model because I don't know where to find this info)

  System ID: 1425

  Product number: LE846UA #ABA

  Warranty start date: 27/03/2013

  BIOS date: 08/11/2010

  BIOS version: F.26

  Processor type: Intel Pentium CPU [email protected]

  Processor speed: 1866 MHz

  Operating system: Windows 7 premium 64-bit

  I bought this computer used. The battery has never held a charge, I've always had it up to use it, but I don't know if I had to buy a new battery it would probably work. I never had the money to make and never really needed it so never bought.

  I tried to access the BIOS and it requires system administrator password. I tried to enter my password that I used to connect to windows, but that did not work. After 3 tries I have a message to disable the system with [6207076] below.

  Is there someone who can help me to fix it?

  I really don't want System recover unless there is a way to access the LIBRARY (documents, music, pictures) if I can help it. I don't have the ability to transfer all of my photos from my other computer before that happened.

  Please help me!

  Hello

  The code below should allow you access the bios menu:

  76165078

  Once, I would like to delete the password entirely - use the arrow keys to select the Security tab and press ENTER.  Use the arrow keys again to select the admin password option and press ENTER.  Enter the current password (use the above code), and then for the new password, just leave this blank and press on enter – do the same for the confirmation field.  Press f10, select this option to save the new settings and press to enter.

  Once completed, boot into the bios menu and reset the default settings - it may also be useful running a quick diagnostic on the HARD disk and the memory that is to be found under the Advanced or the diagnosis tab.

  Kind regards

  DP - K

• loaded Windows 7 and now my online games continue to be disconnected___

  loaded Windows 7 and now my games online keep get disconnected. they remain connected for only a minute. I've updated all the drivers and windows.

  Hi rudydog,

  Welcome to the Microsoft Answers site!

  We would need for more clarity on the issue.

  (1) do you use Internet Explorer to play the game?

  (2) the internet disconnected only when online games?

  (3) what game you're trying to read?

  (4) don't you encounter similar problems when downloading things other than games, like images, songs, etc.?

  Assuming that you are using Internet Explorer 8, for the same time, you can access the link below and see if you can continue to download in the View.Look compatibility for the compatibility view option to the left of the page under Webslice.

  http://www.Microsoft.com/Windows/Internet-Explorer/features/easier.aspx

  Let us however for any other assistance and include all the information possible to help better.

  Concerning
  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

• Windows 7. But the name of the account user each time before fully loading windows. How can I stop this and simply load in thank you Windows.

  I have just upgraded to Windows 7. But whenever I turn on my computer, he wants to support me on my user account name before completely loading windows. How can I stop this and simply load in thank you Windows.

  Hi UKuser7,

  Welcome to Microsoft Answers Forum.

  Automatic logon is disabled in Windows 7 by default for security reasons. If it is enabled, anyone who can physically access the computer can also gain access to everything on the computer, including the networks that it is connected.

  This setting is only recommended for cases where the computer is physically secure.

  To set up Windows 7 to connect to the desktop automatically, follow the steps below.

  1) click Start , and then enter the following command in the start search box:

  Netplwiz

  2) press ENTER.

  This opens the Advanced user accounts Control Panel window.

  (3) in the users tab, uncheck the box next to users must enter a user name and password to use this computer.

  4) click apply at the bottom of the user accounts window.

  (5) when the newspaper automatically on the dialog box appears, enter the user name for which you want to automatically connect to Windows 7. Then enter your password in the two areas where it is requested.

  6) click on the OK button.

  7) click OK in the window user accounts to complete the process.

  Thereafter, your PC at startup, Windows 7 will be automatically connect.

  Ticket back for your comments and concerns.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think

• I have Windows XP Pro on my computer but have now tried to load Windows 8 but I need to remove it again to load Windows 7 Home because most does not

  I have Windows XP Pro on my computer tower but have now tried to load Windows 8 but I need to remove it again to load Windows 7 Home because most does not

  How to perform a new Installation of Windows 7:
  http://pcsupport.about.com/od/OperatingSystems/SS/Windows-7-clean-install-part-1.htm

  How to do a clean install with Windows 7:
  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  Migration from XP to Windows 7 Easy Transfer and a USB key:
  http://www.howtogeek.com/HOWTO/3179/migrate-XP-to-Windows-7-with-easy-transfer-and-a-USB-drive/

  Windows Easy Transfer for transferring from Windows Vista or XP:
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transfer

  If the family Windows 7 product key was already activated, you need to activate by phone. Both your XP COA / product key and Windows 7 very practical key product and then activate by phone following the steps below.

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  J W Stuart: http://www.pagestart.com