loading zadvdctr.dll

Similar Questions

• Equium A60 won't start - error message: Load needed DLLs for kernel

  The problem is the following; in an attempt to start, I get an error message: "Load needed DLLs for kernel.
  Re-install? I made this countless times.

  Following forums, I discovered that this could be a memory problem. However, my laptop has a built-in RAM and I can't change it. I changed that in the expansion without result slot.

  Any suggestions on how to deal with this problem will be greatly appreciated.
  Blessings on you.

  Hello

  Richard's right. Also check it please this document http://support.microsoft.com/kb/812450/en-us maybe it helps!

• Gauge Power Manager: An error occurred when loading Resource Dll

  Just installed windows 10. A dialog window opens immediately after the opening session, saying: gauge of Power Manager: "an error occurred loading resource dll. Power Manager pilot was updated using the System Update and Windows Update. Windows seems to work very well after closing the dialog box.

  Event log:

  The failing application name: rundll32.exe_PWMTR64V.dll, version: 10.0.10240.16384, time stamp: 0x559f39d6

  The failed module name: IMM32.dll_unloaded, version: 10.0.10240.16384, time stamp: 0x559f3b64

  Exception code: 0xc000041d

  Offset: 0x0000000000004c70

  ID of the process failed: 0x17bc

  Start time of application vulnerabilities: 0x01d0cc1e64ae9c62

  The failing application path: C:\WINDOWS\system32\rundll32.exe

  Path of the failing module: IMM32.dll

  Report ID: dc5d2634-1815-4621-9b48-fdd9d21c8ba8

  Faulting full name of the package:

  ID of the failed package-parent application:

  Solved. The error comes from the task by Lenovo power parameters. By disabling the task in the Task Scheduler, the error disappeared.

  This does not affect the function of parameters of Lenovo, just put a little slow to load power information.

• When I use the library function node call in real time, is loaded only once for all or load the DLL whenever it is called?

  When I use the library function node call in real time, is loaded only once for all or load the DLL every time when it is called?

  I have a critical application in real time, in which I use a piece of DLL function developed in C++.  It is ok?  Make sure any senior developer?

  Thank you in advance.

  The user interface thread is the thread that is used to update the user interface. It's slow. And it's supposed to be that way because humans are slow.

  The call library function node can be configured as this thread to use in the configuration for it dialog box. Please visit the LabVIEW documentation on how to do this.

• Error loading lvdaq.dll

  Hello forum of Discussion of LabView.

  I am currently using LabView 2009. My Research Director has tried to open the files inherited from Labview 7.1 on the more modern version, without success. After doing a little research, I found that I had to download traditional DAQ in order to get the latest version of LabView to open the older file. First, I downloaded the DAQ for 7.4.1 and installed with setup.exe, after which I tried to open the program. I got the «error loading lvdaq.dll...» Error in initialization failed". I then downloaded 7.4.4, thinking that maybe it would be a better version. Same mistake. I'm now downloading version 7.1 (a previous DAQ inherited), thinking that maybe the version numbers should equal to the origin of the old Legacy DAQ file I have to run it. I hope that it will work (and if that's the case I'll just delete my post), however if it isn't, I'll update my post and I hope to help to know what to do.

  Thank you in advance for any help.

  
  

• Failed to load nicvidu.dll

  I installed the version 8.5.0 (279) of LabWindows/CVI.  I am running the 'Simple_DIO_Example' example in debugging and get an error during the call to the function 'NIDAQmx_NewPhysChanDOLineCtrl() '.  If I walk through the program I get a popup saying: 'the procedure entry point not found __CVI_Resource_Acquire in the dynamic link library cvirte.dll', but if I run the program without stepping through it, I get a popup saying "could not load nicvidu.dll.  Check your installation. »

  I found several posts referring to the '... ". procedure entry point... "message that shows a different version of the cvirte and to delete multiple copies or repair the installation.  I have one copy, and it is the same version as the software (there are two other references on my computer, but these are in an Acronis backup file).  In addition, messages seem to have in common that the error occurs on a different computer than the development environment, while mine is in the development environment.  I tried the repair track, but no change.

  I have not seen all the messages related to the second message.

  I am using Windows XP SP3, LabWindows/CVI 8.5.0 (279) and NOR-DAQmx version 9.0.2 (recently updated to 8.0.1).

  Thanks in advance,

  Leland

  Hey, Leland,.

  It seems that what you run into maybe a bug.  A corrective action request was filed (CAR #: 196232).  It seems that a dependency has been added for DAQmx IO CVI controls such as runtime engine 9.0 or newer is required.

  Workaround here should be pretty simple: upgrade to CVI Runtime Engine 9.0 or newer: http://joule.ni.com/nidu/cds/view/p/id/1285/lang/en

  Sorry for the inconvenience and thank you for that bring to our attention.

  Please let me know if you have further questions. If you want to track the status of this request at a later date, feel free to reply to this message then.

• Impossible to install FSX Deluxe, receive the error message "could not load the DLL: Gameuxinstall helper.

  Original title: installation of FSX

  When you try to install the FSX Deluxe I keep getting unable to load the DLL: Gameuxinstall helper

  Hello

  What is the version of the operating system installed on your computer (if it is x32bit or x64bit version)?

  I suggest you to contact Microsoft Flight Simulation support to improve the assistance on the issue:

  https://microsoftflight.com/en-us/contactus/

  You can also check out the link below:
  http://www.Microsoft.com/products/games/FSInsider/community/pages/default.aspx

  http://support.Microsoft.com/kb/910816

  http://social.technet.Microsoft.com/forums/en-us/w7itproappcompat/thread/641b3933-3C3a-4077-8a1e-e271b3c19a95

  If you use windows x64bit OS Microsoft Flight Simulator x Deluxe is not supported.

  Reference: http://www.microsoft.com/windows/compatibility/windows-7/en-us/Search.aspx?l=en-us&type=Software&s=Flight%20simulator%20deluxe&os=64-bit

  Hope this information is useful.

• Microsoft expression are not work says cannot load ftpsrvutl.dll

  Microsoft expression are not work says cannot load ftpsrvutl.dll

  Hello

  Microsoft Expression is not supported on responses to check with Experts of these resources.

  Microsoft Expression
  http://www.Microsoft.com/expression/

  Microsoft Expression - community
  http://www.Microsoft.com/expression/community/

  Microsoft Expression - Forums
  http://social.msdn.Microsoft.com/forums/en-us/category/expression/

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Error loading lvanlys.dll

  Hi all

  2 days ago my PC starts to send this message: error loading lvanlys.dll. Inavalid access to memory location. I use winidows 7 and LabView 2010.

  To fix that I do every thing and finally I reinstall windows and labview, but nothing change. I need your advice.

  Thank you.

  Ah. Ok. Hey, I have the same machine!

  It's quite extraordinary material and you should probably mention that.

  There is a bug in the old intel MKL library of known on machines with many cores. Are you really sure it worked before on this same machine with the same version of LabVIEW?

  You should probably update LabVIEW to make it work correctly with 32 virtual cores. This is an old discussion.

  See also my report here. If you disable hyperthreading in the bios, things should work. Would be - that you had it disabled before?

• load needed DLLs for kernel

  Have an Acer Aspire one and I have this message: Windows did not start because of an error in the software. Please report this problems: load needed DLLs for kernel. Please contact your support person to report this problem. NetBook came with XP disc. What can I do? and is it possible to retrieve documents and other things?

  Check this box

  http://support.Microsoft.com/kb/326671

• Marketing, Windows XP displays "error loading msinuc32.dll specified module could not be found.

  While starting up, Windows XP displays "Error loading msinuc32.dll specified module could not be found" help me solve

  Hi Rahmansherif,

  ·         Did you do changes on the computer before the show?

  Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

• I have W XP, SP3. Suddenly, Adobe reader showed the error: Acrobat could not load the DLL base.

  I have W XP, SP3. Suddenly, Adobe reader showed the error: Acrobat could not load the DLL base. Have Adobe reader X (10.0.1) who refuses to be carried away. Other than a drive X (10.1.0) has been reinstalled. Also have Acrobat reader 5.0 is installed from a CD of the Canon scanner slide. The error remains. If anyone can help. Leif Stg

  Hi Leif,

  Where do you get this error message?

  I suggest you to follow the steps and check if it helps.

  Method 1: Uninstall all the instance of Adobe reader and Acrobat reader and install the latest version of one of the drive and check if it helps.

  http://get.Adobe.com/reader/?promoid=DINRS

  Method 2: If the problem persists, perform a system restore and check if that helps.

  How to restore Windows XP to a previous state

• "The logon user interface DLL failed to load athgina.dll. Contact your system administrator to replace the DLL or restore the original DLL. "was my initial problem.

  "The logon user interface DLL failed to load athgina.dll. Contact your system administrator to replace the DLL or restore the original DLL. "It's my original problem due to uninstallation of a Netgear usb internet device programthen a friend got their hands on it: now, put on it goes to safe mode selection screen. the result options of safe in many hyper scrolling mode that reads - multi (o) disc (o) partition (1) windowssystem32drivers\ ___sys... then stops & starts up etc when in last known good config that worked or start normally the icons of windows screen is displayed every thing seems as it should, then it turns a shade of blue just 1/2 a screen of white lettering & bam his judgment in a Flash. Cannot read this fast.      XP sp3 Toshiba Satellite P305

  Hi chygirl,

  You can follow the solution at the bottom of the link:-
  http://www.GeeksToGo.com/forum/topic/270656-cant-boot-up-after-unistall/

• I get an error saying "error loading newdev.dll" when trying to uninstall a program.

  I get the following message "Error loading newdev.dll" when trying to uninstall a program. I can't reinstall without be asked to unistall it first. I want to just delete the program

  original title: error loading newdev.dll

  Try this app (works fine).

  http://www.revouninstaller.com

  I hope this helps.

• load needed DLLs for kernel windows xp home edition

  I tried to put in the disk of OS widow emachines xp home editon, restarted my computer and did a system recovery, chose to do a full system restore (destructive) I just wanted to clear everything and restore the original settings, and now it says windows cannot load beace of an error in the software: load needed DLLs for kernel and I have no idea what to do any help?

  Hello

  Do you have the XP installation CD?
   
  See links
  Error message: Windows did not start because of an error in...
  http://support.Microsoft.com/kb/326671
  Error Messages When you start your computer if Program Files of Windows are missing or corrupted
  http://support.Microsoft.com/kb/812450
   
  If you have the CD of the CD for scratches check, clean the CD-ROM with a soft cloth and try to install the operating system.
   
  If you do not have the CD you can organize a CD borrowed from a friend or a parent and try to install. You can also contact the manufacturer of your computer.