Loads of Boot Up Error Messages: "CLR error: 80004005 ',"the program can't start because LPK.dll is missing on your computer.

Similar Questions

• When you connect or not, receive error message for Logonui.exe "the program can't start because RASAPI32.dll is missing on your computer. Try reinstalling the program to fix this program. »

  This only happens when I boot or turns off, what I do is click on the right and it will normally connect, my computer still works well after connected. My features are Core 2 Duo E8400 @ 4.0 ghz, HDD (primary drive), Raptor 80 GB WD 500 GB WD Green drive, 4 GB ram, motherboard Asus P5e3, Radeon 5850 graphics card. The error is only one disadvantage of having to click out of it, I'm just worried that it may cause problems later. Any help would be appreciated.

  -Thank you

  Wow, it worked perfectly! The annoying error is over now! Thank you very much for your help!

  (I could not mark you for the answer so here are the steps for the problem-)
  Citing Shekhar S
  "To do this, follow these steps:

  1. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  2. type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. scans all protected system files and replaces incorrect versions with appropriate Microsoft versions. »)

  Thanks again!

• When booting Windows 7, error, "the program can't start because LayoutDll12Oem.dll is missing on your computer.

  Whenever I start my PC brand new I get a pop up message titled, "error RoxWatchTray12Oem.exe - System" the body of the window to say, "the program can't start because LayoutDll12Oem.dll is missing on your computer. Try reinstalling the program to fix this problem.  It does not seem to affect what only on the PC, but it's annoying to see every time I start the PC. Any help? I have windows 7 64 bit.

  Hello

  Method 1:

  I suggest that you put the computer to boot and check for the issue:

  http://support.Microsoft.com/kb/929135

  Note: Place the computer to a normal startup when you have completed troubleshooting by following step 7 from the link above.

  Method 2:

  You can also check the below link for troubleshooting which talks about the same issue when you face and check if this may help:

  http://social.technet.Microsoft.com/forums/en-us/w7itpromedia/thread/8d25cd36-5fe4-4691-9b68-433ebd60a717

• Civilization IV in Windows 7 gets error - "the program can't start because D3DX9_32.DLL is missing on your computer.

  I followed the script full compatibility to Win XP, everything as I was told and when I tried to launch the game, I got this error message:

  "The program can't start because D3DX9_32.DLL is missing on your computer. Try reinstalling the program to fix the problem. »

  I can't tell you that reinstall does not work... I followed this circle twice... it does not work... If someone can get this thing works on Win 7, please let me know.

  Hello PixieRose.

  First up you don't have to bother running it in compatibility mode, you don't need to.  Just install DirectX or install it from the disc of Civ 4. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• iTunes gives error "the program can't start because CoreFoundation.dll is missing on your computer. Try reinstalling the program to fix this problem.

  I downloaded iTunes and when I restart my computer I got a message-

  "The program can't start because CoreFoundation.dll is missing on your computer. Try reinstalling the program to fix this problem.

  everything seems to work even the iTunes page but whenever I turn on my computer I get this message. I am running windows 7, 32 bit. I bought an Apple iPhone 3G and that is why I decided to download iTunes to create an account to get apps and music to my phone. I reinstalled iTunes and still get the message, any ideas on what I do not or should it please?

  Ignore the mention in the article following the Apple MobileMe support and uninstall iTunes (by following the instructions on the link where it tells you to uninstall 6 applications that iTunes installs) and restart then download and install iTunes again: http://support.apple.com/kb/TS2211

• System error "the program can't start because d3dx9_43.dll is missing on your computer.

  Dear Sir.

  Update software of nero multimedia suite 10, I found ' blue nero - scratch "was installed on my computer (win7 64 bit update until today) when I tried to open the drive I got the system error message" program cannot start because d3dx9_43.dll is missing on your computer, try reinstalling '. " I first used to uninstall it, but I couldn't find the program in "programs and features". Please tell me how to uninstall or solve the problem?

  I updated latest version of directx 11 on my computer, is it necessary to install directx 9?

  Yes, you can try to install DirectX 9:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=35

  As an alternative, you can try to update to a later version of Nero.

• Error: The program cannot start because sqmapi.dll is missing on your computer. Try reinstalling the program to fix this problem. (Unable to install SP1)

  What is Spinstall.exe

  I can't install windows SP1 "the program can't start because sqmapi.dll is missing on your computer. Try reinstalling the program to fix this problem. »
  How can I fix?

  First of all, please see - How to use the tool File Checker system to resolve missing or damaged on Windows Vista or Windows 7 system files

  If execution of the System File Checker does not have the Service Pack Setup error, then suggest that you Configure the system to boot before attempting to apply SP1 to exclude interference from 3rd party software - How to solve a problem by performing a boot in Windows Vista or in Windows 7

  You can also try to download and save the full, stand-alone SP1 package, create a new folder on the root drive (the drive where Windows is installed on, usually C:\), name the SP folder, and then move the SP1 downloaded & saved in this folder.
  Configure the system to boot, then try another attempt at installation of SP1.

  The full, stand-alone SP1 packages can be downloaded and saved this page-

  Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932)

  Click on the button continue to validate Windows 7, and then click the download in the download for your system architecture (Windows6. 1 - KB976932 - X 86 .exe or Windows6. 1 - KB976932 - X 64 .exe) to start the download.

  If no joy, contact Microsoft for assistance to get SP1 installed
  https://support.Microsoft.com/OAS/default.aspx?Gprid=14019&St=1

  Launch the request for assistance by clicking on the edition of Windows 7 is installed.

• Error - the program cannot start because MF.dll is missing on your computer in Windows Live Movie Maker.

  Original title: problems with Windows Live Movie Maker.

  I've had my laptop recently wiped and I installed all the drivers needed and antivirus. I have Windows Live Movie Maker on my laptop previously. But when I tried to download Windows Live Movie Maker it does not work. (about 7 times now.) Works fine Windows Live Photo Gallery PERFECTLY every time. but the Windows Live Movie Maker does not work.
  He used to have the error
  "Director of Windows cannot start because WMVCORE." DLL is missing from your computer. »

  I recently fixed this error. Now, he's saying,
  "The program can't start because MF.dll is missing on your computer."

  I've tried EVERYTHING.
  Download updates windows, reinstall (several times over a period of a long week.) and the package of refreshment, that NEVER ends and just said that it cannot continue. (He said it'll take 15 hours to install in the first place)

  Is there something that I am missing?
  Please help me. I need it for my business.

  Hi BrookeSmith,

  When you face issue in Windows Live Movie Maker, I recommend that you post your question in Windows Live Solution Center for assistance.

  http://www.windowslivehelp.com/

  Hope the helps of information.

• I get an error message: "the progran cannot start because DEVOBJ.dll is missing on your computer.

  When I start my computer my screen is all black and the message says 'the progran cannot start because DEVOBJ.dll is missing on your computer. Try reinstalling the program to fix this problem' I don't see even the Start button if someone knows what's going on please help.

  Take a look at the following:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/devobjdll-is-missing-cannot-login-reinstall/5080677a-DB05-4A34-B36F-d0c3329c2dd0

  I would also like to launch a full scan with your antivirus

• Problems installing the Apple updates. System error program cannot start because MSVCR80.dll is missing on your computer. "

  Original title: I am a computer newbie, could someone explain/direct me?  Many thanks, Mark

  Recently, I received an Apple update normal I-tunes.  Have done a little before, never with a problem.  This time, it seemed that everything was fine, then at the end (when expects a message "successfully installed", I received an error box with this: APS Daemon.exe - error system, the program cannot start because MSVCR80.dll is missing on your computer.)  Try reinstalling the program to fix this problem. "Well, since nothing else seems to work (or helping) and my music files have been backed up, I uninstalled I-Tunes successfully, then attempted to re - install.  I had to download the installation of Apple, which was very good. Once again, everything seemed to go smoothly, installation, etc. until it got to the point when he said "Marketing Services".  Then, as before - everything stopped and jumped up to the exact same APS Daemon.exe - error box system (with the same message) referencing MSVCR80.dll once again, saying that it is missing and try to reinstall the program.  From now on, I don't know exactly what that means (I know, I know) or if it's something someone like I could fix (or even try), or if I should just run down to my local computer store?   Never had any problems with the Apple or Windows updates before this one.

  Thank you to everyone how wants take a few minutes and help a person who has started working on computers far too late in life!
  Sincerely, mark Hawk

  Hello

  Uninstall everything according to the instructions from Apple:

  «Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»

  http://support.Apple.com/kb/HT1923

  ___________________________________________________

  It is also the same list of what to remove what is in the link above from Apple:

  http://pcsupport.about.com/od/findbyerrormessage/a/MSVCR80-DLL-not-found-missing-error.htm 

  __________________________________________________

  Or try this program to remove it:

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  Then, download and save the iTunes on the desktop > then right click > select run as administrator to install.

  If the advice already given does not, please contact Apple for assistance.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  See you soon.

• The program cannot start because LibMySQL.dll is missing on your computer, try reinstalling the program to fix this problem, it is displayed as error on my desk.

  Original title: Mysql Libmysql Dll error correction

  The program cannot start because LibMySQL. dll is missing from your computer, try reinstalling the program to fix this problem, it is displayed as error on my desk. LibMySQL. dll is C:\Windows\System32, but I can't run the .exe file, I want to run, I can to do, how to fix this problem automatically, I have Windows7 64-bit machine, computer laptop lenovo T530

  Thank you!

  I solved this problem, I put this file LibMySQL. dll to the folder where the .exe file is, I want to run. Exe file, I want to run, cannot call LibMySQL. DLL in C:\Windows\System32,that is the question, I found on a forum suggestion what I have to do

• Error of World Of Tanks: the program cannot start because d3dx9_43.dll is missing on your computer.

  Original title:

  After the download problem

  I tried to play on World Of Tanks on my laptop Windows 8 and he says: the program cannot start because d3dx9_43.dll is missing on your computer.

  So I did some research, and Microsoft told me that I had to install the DirectX program. After I installed the DirectX software and tried to run, he gave me the following message is displayed: a necessary .cab file for installation is not reliable. Please check Cryptographic Services are enabled and the certificate file is valid.

  I don't know what to do to solve this problem.

  Hello Joseph,.

  Thanks for posting your query in Microsoft Community.

  I understand that you have any questions, by playing the game World of Tanks in Windows 8. We will certainly help you with the same.

  You can read the steps below for the game of automatic encryption Services Cryptography on AutoServices and then try to install the program again. To set the cryptographic on AutoServices, follow these steps:

  1. Start the Administrative Tools utility in control Panel.
  2. Double-click Services.
  3. Click Cryptographic Services, and then click Properties.
  4. Click Automatic for Startup type, and then click Start.

  Then install the latest version of DirectX for Windows 8 and see if that helps.

  How to install the latest version of DirectX

  http://support.Microsoft.com/kb/179113

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

• Windows 7 system error 'WindowsSearch.exe cannot start because uncdms.dll is missing on your computer.

  The error screen suggests "try reinstalling the program to fix this problem.  The "program" is not on my program list.  Any suggestions?

  Hello
   
  Exactly when yoou will receive this error message?

  You have all the search engines on the third PC installed on the computer?

   

  Windows search engine is a component of windows, and it wouldn't be listed under programs and features.

   

  Method 1:

  Visit the link below and follow the steps

  Open the troubleshooter for search and indexing

  http://Windows.Microsoft.com/en-us/Windows7/open-the-search-and-indexing-Troubleshooter

   

  Method 2:
  Perform a virus scan.
   
   

• "Error system server.exe. The program cannot start because mozglue.dll is missing on your computer. Try reinstalling the program to fix this problem. »

  I tried it perform the clean boot and find the problem comes from the startup of Windows Update.

  Is it possible to fix this?
  I tried to reinstall firefox already, but it does not work.

  Hi Lusia Kristiana Purnama,

  1. have you made changes on the computer recently?

  This seems to be an infection by the virus on the computer. I suggest you analyze your computer to make sure that the computer is virus-free. You can do the scan for viruses in normal mode and check if that helps.

  Method 1.

  You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 2.

  You can also start the computer in safe mode with network and then run virus scan.

  Advanced startup options (including safe mode): http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode

  I hope this helps.

• Photoshop.exe - error system - the program cannot start because ONCoreFoundation10.dll is missing on your computer. Try reinstalling the program to fix this problem.  --------------------------- OK    ---------------------------

  How to fix?

  You do what the message says and try a new installation?

  Sign out of your account... Uninstall... to run vacuuming...

  -non-Cloud programs, to disable the service before uninstalling

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -using the vacuuming after uninstalling and before reinstalling is often necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  -Restart your computer... Sign in to your account... Reinstall

  or

  can help the Win10 full-term https://www.microsoft.com/en-au/download/confirmation.aspx?id=30679