loads of folder system32 on restart

Similar Questions

• When Vista starts, getting the error "Error loading C:\Windows\system32\sshnas.dll this module specific point is not found"

  When I start my PC it opens as soon as my desktop appears on the screen, error loading C:\Windows\system32\sshnas.dll the specified module could not be found.  How can I fix it?
  * original title - need HELP, Windows System 32 error *.

  Hello

  who is / was malware or a boot remains for her entry

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Problem loading c:\windows\system32\NvMcTray.dll

  When I connect my account these two pop-up windows.
  C:\windows\system32\NvCpl.dll and c:\windows\system32\NvMcTray.dll loading problem
  I scanned the computer with pc max speed. But when I press the fix all button program incounters an issue and stops?
  The program is only a limited trial and not paid.
  Hope you can help.
  Thank you.
  Steve

  I can't comment on your pc max speed problem, but you can solve your problem by reinstalling the NVIDIA drivers.

  Here are my instructions standard copy/paste of the JKB1687 article for your reading pleasure:

  If you are using an NVIDIA video system (whether on the motherboard or a supplement), the installation of the NVIDIA software added one or more startup items to launch the NVIDIA Control Panel.  They are set to launch and run whenever your system boots.

  If it worked before and you have made some system updates lately, something is messed up with it or your system has an affliction of malware.

  To see what commands look like, click Start, run and enter in the box:

  Msconfig

  Click OK to start the System Configuration utility, and then click the Startup tab to display the startup items.  You may need to drag the autour columns to see things better and like msconfig isn't a Boot Manager (this is a troubleshooting tool) you can't "make of the display is wider.

  Items with check box will be launched automatically once XP restarts.  With the checkbox elements are still "installed" but not set to start automatically every time you start XP.

  The NVIDIA partners start lines see you in msconfig Startup tab will look something like this:

  RunDLL32.exe C:\windows\system32\nvcpl.dll, NvStartup
  RunDLL32.exe C:\windows\system32\nvmctray.dll, NvTaskbarInit

  If the C:\windows\system32\nvmctray.dll or C:\windows\system32\nvcpl.dll files are missing somehow corrupted, inconsistent, out of date or wrong versions (maybe), when NVIDIA applications trying to launch, messages can appear like this (or even complain):

  Rundll32.exe - bad Image
  The application of the DLL c:\windows\system32\nvmctray.dll is not a valid Windows image.   Please check this against your installation diskette.

  RUNDLL
  Error loading c:\windows\system32\nvmctray.dll
  %1 is not a valid Win32 application

  If you don't think you use the NVIDIA Control Panel, you could simply disable the items is msconfig to prevent it to launch when you start your computer.  If you use Control Panel NVIDIA, deactivation of the elements and will leave your system without (perhaps not a good thing) NVIDIA Control Panel.

  You could just go ahead and disable the startup items in msconfig (deactivation does not uninstall anything), restart your system and understand the functioning of your system.  If things get worse, you can rerun msconfig and reactivate the NVIDIA elements, but I hope that you will not want to fix things the right way.

  Disabling items in msconfig is not really fix things and you will not have a NVIDIA Control Panel, but some people don't know what the NVIDIA Control Panel looks so can be good.  You will have stopped the message from popping up every time you start.

  If you want to use the features of NVIDIA Control Panel, you must repair or reinstall your NVIDIA software.

  The best way to reinstall the NVIDIA software is to visit NVIDIA support web page and let your system and recommend the best software for your system or that you get the right version of the software on their web page and download the latest package of video driver for your system software and install it yourself.

  It is recommended to run the scan NVIDIA with Internet Explorer.

  Here is the link to the support page NVIDIA for the scan:

  http://www.nvidia.com/download/Prescan.aspx?lang=en-us

  Read the instructions, and then click the GRAPHICS DRIVERS button to start the scan.

  Let online to take a look at your video system scanner them and see what he suggests for drivers and consider their analysis if they offer a new pilot.

  Download and install the recommended driver and restart your system.

  If following their indications do not straighten things, then follow these steps:

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
   
  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system information summary appears, click Edit, select all, copy and then paste the
  information here.

  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information.

  This will minimize back Q & A and eliminate guesswork.

  There will be some personal information (such as the user name and the name of the system), and everything seems to be
  information private for you, just delete pasted information.

  When you have the time, I could do that too:

  Perform scans for malware, and then fix any problems:

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

• I get cannot load bitmapc:\minint\system32\res256\rstbgd.svg during an attempt of the pc recovery

  When I try to use pc recovery iget failed to load bitmapc:\minint\system32\res256\rstbgd.svg. I click ok and it makes that restart. I have a compaq laptop with xp media center. any help woulp be appeciated.  Ty

  Check this box:

  http://www.bleepingcomputer.com/forums/topic254200.html

• I get an error code whenever I start my computer. I have loaded several packs of registry repair software but cannot get rid of the message. The message bed error loading c:\windows\system32\pofusido.dll the specified module is not found

  I get an error code whenever I start my computer. I have loaded several packs of registry repair software but cannot get rid of the message. The message bed error loading c:\windows\system32\pofusido.dll the specified module is not found

  Hello

  I googled this file pofusido.dll and it could be caused by a virus.

  I would suggest that you disable the restore mode as viruses use it to reinstall set apart them.

  Download and install the free http://www.malwarebytes.org/

  Restart the computer and keep pressing F8 to get into safe mode with network connection.

  Once you have updated Malwarebytes run and see if it can remove the virus.

  So delete all cookies in your internet Explorer.

  Please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul

• Driver problem? N ' not load driver \SystemRoot\system32\DRIVERS\kbdhid.sys...

  Recently, I get a blue screen message whenever I start my Vista Toshiba laptop. I think that the hexadecimal number is 7F with a bunch of 0, but it certainly has a 7 followed by a letter. When you use boot logging, a dozen drivers who appear to be associated with Toshiba or an AMD processor seem to be does not. So, I tried the BIOS update. Most of them disappeared accept the following:

  Did not load driver \SystemRoot\System32\DRIVERS\srv.sys
  Did not load driver \SystemRoot\system32\drivers\parport.sys
  Did not load driver \SystemRoot\system32\DRIVERS\kbdhid.sys
  Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS

  Could someone tell me if any of them would cause a problem or anyone could suggest as what to do to fix my blue screen of death problem?

  Hello

  Have you added a hardware or drivers updated recently? Check Control Panel - Windows to see updates
  If all drivers have been updated it just before what is going on has begun.

  For 7f - this might be a problem of material such as uncomfortable cards or memory, while there are other causes.
  Power electric low could also lead to this. Use the troubleshooters above and below, and when you get to the
  pilots and segments of memory refer to my next message below and then return to the if necessary troubleshooters

  If a PC remove ALL power. Opening the case, remove and reinstall all memory cards and all cables (are not
  just try to squeeze) on both ends if they are accessible and on the device ends if not (remove cables and)
  the relocation of their aid to eliminate minor corrosion).

  If a laptop or a PC, you will need to take to a store (not BestBuy or other BigBox stores) or your system
  Support from the manufacturer.

  ----------------------------------------------------------------------

  BCCode: 7F 0x0000007F which is the same as 0x1000007F

  UNEXPECTED_KERNEL_MODE_TRAP bug control has a value of 0x0000007F. This bug check indicates that the Intel CPU generated a trap and the kernel could not catch this trap.

  This trap might be a bound trap (a trap the kernel is not allowed to capture) or a double foul (an error occurred during the processing of an earlier fault, which always results in a failure of the system).

  Parameters

  The first parameter that is displayed on the blue screen indicates the number of trap.

  The most common trap codes are the following:

  • 0x00000000 or division by zero error, indicates that a DIV instruction is executed and the divisor is zero. Memory corruption, other hardware problems or software failures can cause this error.
  • 0 x 00000004, or overflow, occurs when the processor executes a call to an interrupt handler when the overflow (OF) is flag set.
  • 0x00000005, or limits check fault, indicates that the processor, then executing a BOUND instruction, determines that the operand exceeds the specified limits. A BOUND instruction ensures that a signed array index is within a certain range.
  • 0 x 00000006 or Opcode not valid, indicates that the processor attempts to execute an invalid instruction. This error occurs generally when the instruction pointer is corrupted and point to the wrong address. The most common cause of this error is hardware memory corruption.
  • 0x00000008 or Double fault, indicates that an exception occurs during a call to the previous exception handler. In general, two exceptions are handled in series. However, there are several exceptions that cannot be handled serially, and in this case, the processor signals a double fault. There are two common causes of a double fault

  Cause

  0x7F bug check occurs after the installation of a faulty or incompatible hardware (including memory) or if installed hardware fails.

  A double fault can occur when the kernel stack overflows. This overflow occurs if multiple drivers are attached to the same battery. For example, if two file system filter drivers are associated to the same stack and then again the recursively of file system, the capacity of the battery.

  Solve the problem

  Troubleshooting: If you have recently added the material to the computer, remove to see if the error recurs. If the hardware failure existing, remove or replace the faulty component. Run the diagnostics of material that does not have the system manufacturer supplies to determine which hardware component.

  The scanner memory is particularly important. Faulty or incompatible memory can cause this bug check. For more information on these procedures, see the manual of your computer. Check that all the cards in the computer are well calibrated. Use an ink eraser or electrical contact treatment, available in electronic supply stores, to ensure the adapter card contacts are clean.

  If the error appears on a newly installed system, check the availability of updates for BIOS, SCSI, or card network controller. These updates are generally available on the Web site or the hardware manufacturer BBS.

  Confirm that all hard drives, hard disk controllers and SCSI adapters are listed in the list of the products tested Microsoft Windows market.

  If the error occurred after the installation of a new or updated device driver, you should remove or replace the driver. If, in this circumstance, the error occurs during the startup sequence and the system partition is formatted with NTFS, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console in order to access the file.

  Also to restart your computer and press F8 to character-based menu that displays the choice of operating system. In the menu of Advanced Options , select the last known good Configuration option. This option is most effective when you add a single driver or service at a time.

  Overclocking (setting of the CPU to run at a speed higher than the nominal specification) can cause this error. If you have overclocked to the computer that is experiencing the error, return the CPU to default clock speed setting.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver that generated the error. You can also disable caching memory BIOS to try to resolve the problem.

  If you have encountered this error during the upgrade to a new version of the Windows operating system, the error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version. If possible, remove all third-party device drivers and system services and disable all antivirus before upgrade you. Contact the software manufacturer for updates of these tools. Also, make sure that you have installed the latest Windows Service Pack.

  Finally, if all of the steps above do not resolve the error, take the system motherboard to a repair for the diagnostic facility. A crack, a scratched trace, or a defective component on the motherboard can also cause this error.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Loading paper folding in Z for Designjet T1100ps

  Cannot load paper folding in z for HP Designjet T1100ps

  Not an update of the firmware will not help, more research shows that this printer is just not set up for this type of paper.

• I get the rundll error "error loading C:\WINDOWS\system32\vcnflrd.dll the specified module is not found."

  I get the rundll error "error loading C:\WINDOWS\system32\vcnflrd.dll the specified module is not found."
  I have Windows XP Professional, I installed Windows 7 and windows 8 and windows defender and avast antivirus scan and complete.  I did a full cleaning.

  Thank you

  I get the rundll error "error loading C:\WINDOWS\system32\vcnflrd.dll the specified module is not found."
  I have Windows XP Professional, I installed Windows 7 and windows 8 and windows defender and avast antivirus scan and complete.  I did a full cleaning.

  Thank you

  Hello

  you are fully updated? This means that the module cannot be found, what you want to do when you get this error? error codes >?

  check the reports on the problems and solutions

  You can do a support ticket, follow the link

  http://support.Microsoft.com/common/international.aspx?RDPATH=DM;en-us; Select & Target = support

  Microsoft product support has some tools that will be useful and can help to find a solution

  have a great day with OneCare Scan + 50 tips Windows 7even infected with the center of privacy? DELETE this Blog search & response threat Sysinternals Live Tools + TRANSLATOR+ Photosynth + Microsoft Security + Microsoft SUPPORT + Of Live Labs PIVOT + Microsoft Live Labs + Office 2010 beta + get Windows LIVE!

• "Error loading C:\WINDOWS|system32\sshnas21.dll".

  This is the message that appears when I start my system "error loading C:\WINDOWS|system32\sshnas21.dll. The specified module could not be found. "What do I do?

  This is the message that appears when I start my system "error loading C:\WINDOWS|system32\sshnas21.dll. The specified module could not be found. "What do I do?

  Looking for errors like this by doing a search on Google for the name of the file.  Usually, they turn up without success.

  When a search in no hits or suspicious hits result, the answer is usually that the file in question is linked to the malicious software and your anti-malware application has deleted or quarantined file, but left to the Windows registry entry that tries to start the malicious software when you start your computer.

  See http://answers.microsoft.com/en-us/windows/forum/windows_7-files/error-of-sshnas21dll-missing-at-the-startup/c414c2a7-eb5c-4d67-9883-7817fb742d18 (ignore the parts specific to Windows 7)

  Download, install, update and run full scans with two of these free analytical tools:

  MalwareBytes AntiMalware
  SUPERAntiSpyware

  Do not run the scans at the same time.  They can take some time, so start an and then go for a non computer chore for awhile.

  If the scans does not solve the problem (and they can't, because the actual malware file has already been processed), then download and run Autoruns.  Click on the "Connection" tab and look in the column 'Image path' for the dll named in your error message.  If it is not displayed in the connection tab, click the "all" tab and use the file > search tool.  A characteristic of the search of Autoruns tool is that you must move the selection under the element line "found" before you "Find Next."

  Once you find the line with the file in question, either "delete" or (if you want to be safer) uncheck the box.  The latter prevents the line running, but you can reactivate it later by removing the check mark.

• Error loading c:windows\system32\sshnas.dll wants to say what and how do I clear this pop up?

  Error loading c:windows\system32\sshnas.dll wants to say what and how do I clear this pop up?

  Hello

  Step 1: sshnas.dll is a component of spyware or malware.  Online virus and malware scanner and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Step 2: You can also see the question in the clean boot state.

• RUNDLL error-error loading C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\cnmsm98.dll

  I have a Canon MX850 printer: when the document is passed, I get the following error and it repeats until I have load with paper and press OK.  I'll have 30-40 on the screen before I can reload the printer with paper.  I deleted the printer and reloaded it.  I scanned everything and nother works.

  ---------------------------
  RUNDLL
  ---------------------------
  Error loading C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\cnmsm98.dll

  The specified module could not be found.

  ---------------------------
  Ok
  ---------------------------
  billtrice

  Hi billtrice,

  I suggest that you contact Canon support for more information on the issue.

  http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer

• Error loading C:\WINDOWS\system32\shimgvw.dll

  Hello everyone,

  Recently, I received a very troublesome machine I have don't seem to not be able to solve. He began with thumbnails of Image not appearing is not in Windows Explorer.

  Since then, I have studied the issue widely and have not yet found a solution. Here is a list of the things I've tried:

  • Open a jpg image with 'Windows Picture and Fax Viewer' by using a right-click in Solution Explorer, and selecting 'Open with'. Result: "error loading C:\WINDOWS\system32\shimgvw.dll system cannot find the file specified."
  • Check the existence of shimgvw.dll and there are of course. When I opened a back and 'cd' command line to C:\Windows\system32, enter "regsvr32 shimgvw.dll", the result is: "failed to LoadLibrary ("shimgvw.dll") - the system cannot find the file specified."
  • Next test was run "sfc/scannow" as suggested in the many messages on several online forums. This command runs for a while and returns without error. Tried the above steps once again, same results.
  • So I uninstalled SP3 through the Add/Remove programs in Control Panel. Has raced for a while. SP3 renewed. Has raced for a while. Still not perceived image and still the same error messages.
  • Finally, I got a Windows XP SP3 slipstream CD, that I created a while back and ran a repair of the system. All is very well, and when finally the system rebooted, everything was the same old.

  I know that this may be easier to simply reinstall Windows XP Home fresh from scratch at this stage, but the user don't like this idea due to the loss of all applications, settings, etc.

  I would appreciate some guidance on how to solve this problem.

  Thank you!
  Wolfgang

  Since I have seen so many questions related shimgvw.dll on the web, that many people had not found a solution, I will post the solution I found. Thanks to some research more, I stumbled upon the Dependency Walker tool. http://www.DependencyWalker.com/ after the installation of this application, I was able to analyse fully what shimgvw.dll should be able to load all dependencies. Curiously, one of the DLLs it requires is gdiplus.dll, who, for some reason, in \windows\system32 but not exist inside a different application path I forgot now. Whatever it is, it should be noted that there is a 'properties' function in the Dependency Walker tool. Right-click the dll with red indicator and verify the path where a dll (in my case shimgvw.dll) tries to locate another dll file. I then just used the system32 gdiplus.dll and copied into the other lane and eventually I got with regsvr32 shimgvw.dll. Explorer then looked at thumbnails showing again and images and faxes were also back in business.

• Error loading C:\Windows\system32\cbsrSmng.dll

  At the start of my pc a message appears telling me "error loading C:\Windows\system32\cbsrSmng.dll" each time. I have an Aspire 6930 Vista system and this error has done this for over a year. I ran "sfc/scannow", and he says that couldn't be repaired. I have my original backup disk. Am now lost what to do.

  Hello

  To remove the error message if still there after the controls above to malware.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured so that it starts automatically when
  your system boots and you connect. Autoruns also shows you the complete list of the registry
  and where applications can configure Auto-start for the files settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Error loading C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\LXBTtime.dll the specific module could not be found.

  Since I removed my old Lexmark printer and replaced by a Kodak ESP C310 printer I get the following popup every time you start... Error loading C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\LXBTtime.dll the specific module could not be found.

  Hello jackc37,

  Have you tried to reinstall your Lexmark printer and then uninstall, to check if everything is deleted?  When you started your system in a clean boot, you saw the error listed above?

  How do I uninstall Lexmark printers

  Please let us know status.

  Thank you

  James

• "error loading c:\windows\system32\sshnas21.dll" and stop c000021a

  2 problems-1 - error loading c:\windows\system32\sshnas21.dl--2 - root cause found c000021a error checking, settings = oxo, oxc0000001, ox98879140, ox1105e4, boot critical file is damaged.

  It is always sensible in this situation to achieve a malware check

  Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.
  http://www.Malwarebytes.org/
  Download and run SuperAntiSpyware (Free Edition)
  http://www.SUPERAntiSpyware.com/download.html

  Some malware is installing the entries of proxy server redirecting internet connections. If you encounter this problem step 2 see in the following link:
  http://www.myantispyware.com/2011/02/21/how-to-remove-Internet-Security-Essentials-virus/