Local storage - lack of space for the backup snapshot?

Similar Questions

• What is normal for the backup of XP SP3 and the startup type of the removable storage service?

  I was getting ready to plan and attempt a clean full backup for tonight.  I have the backups created on several entities, currently backup but have a very stable system at the moment and wanted to try to make a clean backup file.  That day has finally arrived after been forced a corrupted system files hard drive failure "repair" critical and forced me to go back to SP1a (my Windows Genuine valid CD which I highly appreciate) in order to obtain any boot system, including safe mode and console mode.  Repair has presented many incompatibilities at the level of program and system, including the basic WMI and COM of the corruption system.  Three months later... it of time to update my backups and recovery procedures and hope that this does not happen!

  In preparation, I decided to refresh my memory on the use of the backup and by browsing the Help and Support Service Center files.  One of the first things I noticed was "storage removable service must be started for the backup works correctly."  Audit and inspection of my existing Services using computer (Local) management, I have observed that after a normal windows startup, the removable storage service is not started with manual startup type.  I use a USB drive connected as my backup media, and it is fully operational as a normally formatted NTFS data disk volume.  I have windows indexing disabled on this volume.  Is the type of service required removable storage of normal manual started?  The backup program will automatically start this service?  I know I've never manually started it myself and backups seem to work well.  Should we change the startup type to automatic?

  -Thanks, Jerry

  I would like to leave as a textbook.

  The Service will start (if capable) as soon as ntbackup.exe begins.

  If you want to see, with your Services window related to the function of RS place and it will not work and the manual.

  Click Start, run and enter in the box:

  Ntbackup.exe

  Click OK to start the backup and the Restore Wizard.

  Go back to your Services window and press F5 to refresh and SR Service should now work.

  When you exit the backup and the Restore Wizard, the RS Service stops (it may take a few minutes), and you may need to close the Services applet and reopen it to notice she's moved to manual and not running.

  You will see things like present to the event system log viewer:

  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7036
  The removable storage service entered the running state.

  (this is when you go out the backup and the Restore Wizard and wait a few minutes... then the Service stops itself...)

  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7036
  Description:
  The removable storage service entered the stopped state.

  It's like aid and assistance...  Most of the people (including the technical support engineers who are hired by Microsoft) say to set the Startup Type to automatic, but you don't have to...  Set it to manual and it will start fine when he needs start (if he can).

  There is no need for these Services (and many other Services in XP) as starting at each restart and run all day without doing anything.

  Here is a good list that will help you understand your XP Services:

  http://www.blackviper.com/2008/05/19/black-vipers-Windows-XP-x86-32-bit-Service-Pack-3-service-configurations/

• determine the storage space for the upgrade of the APEX

  I put on my 11.2.0.3.12 level APEX APEX to APEX 4.2.4.00.08 version 3.2.1.00.12 version database.  I understand that I must perform the full upgrade, I am moving from version 3.2.x to 4.2.x.

  According to the APEX 4.2 Installation Guide for the full development environment, I have to spend in the following arguments:

  @apexins.sql tablespace_apex tablespace_files tablespace_temp images

  Where:

  • tablespace_apexis the name of the storage space for the user of the Oracle Application Express application.
  • tablespace_filesis the name of the storage space for the user to Oracle Application Express files.
  • tablespace_tempis the name of the temporary tablespace and tablespace group.
  • imagesis the virtual directory for the images of Oracle Application Express. To support future upgrades Oracle Application Express, set the directory of the virtual image that /i/ .

  
  

  How can I determine which user is the " " " User of the oracle Application Express application" and which the user is the user Oracle Application Express 'files' (if I can then watch their default storage spaces)?

  
  

  
  

  Hi Mimi Miami,

  Mimi Miami wrote:

  I put on my 11.2.0.3.12 level APEX APEX to APEX 4.2.4.00.08 version 3.2.1.00.12 version database.  I understand that I must perform the full upgrade, I am moving from version 3.2.x to 4.2.x.

  According to the APEX 4.2 Installation Guide for the full development environment, I have to spend in the following arguments:

  @apexins.sql tablespace_apex tablespace_files tablespace_temp images

  Where:

  • tablespace_apexis the name of the storage space for the user of the Oracle Application Express application.
  • tablespace_filesis the name of the storage space for the user to Oracle Application Express files.
  • tablespace_tempis the name of the temporary tablespace and tablespace group.
  • imagesis the virtual directory for the images of Oracle Application Express. To support future upgrades Oracle Application Express, set the directory of the virtual image that /i/ .

  How can I determine which user is the user Oracle Application Express 'application' and that the user is the user Oracle Application Express 'files' (so I can then look at their default storage spaces)?

  APEX 3.2.x installation that follows is users:

  • Oracle Application Express Application user: APEX_030200
  • Oracle Application Express user files: FLOW_FILES

  So to determine the tablespace_apex and the tablespace_files you must connect with the user sys with sysdba privilege and run the following query:

  SELECT USERNAME
       , DEFAULT_TABLESPACE
    FROM DBA_USERS
   WHERE USERNAME IN ('FLOWS_FILES','APEX_030200')
  

  Then use the APEX_030200 user as tablespace_apex tablespace and a tablespace of the FLOW_FILES user as tablespace_files.

  I hope this helps!

  Kind regards

  Kiran

• Which card to use for the backup of Win8

  Windows 8 requires a minimum of 32 GB card to use for the backup. I bought a PNY 32 GB (http://www3.pny.com/32GB-Pro-Elite-Series-Hi-Speed-SDHC-Class-10-UHS-1---35MBs-233X-P3122C442.aspx ), but it wouldn't work. Even though it says 32 GB it is actually a little less. If I buy a 32 GB SanDisk will, that I meet the same problem? Exactly what the size is a SanDisk 32 GB card? (http://www.sandisk.com/products/memory-cards/sd/standard-class4/?capacity=32GB)

  Thank you

  Ed P2

  any card 32 GB will be less than 32GB after it is formatted to be used in a computer. It is a standard for all types of storage.

  If you need 32 GB of actual useful storage space, you will have to get a 64 GB card.

• No space for the journal on the volume

  Hi guys,.

  I have a problem that does not touch anything (that I know) except my syslog flooding.

  Context of the installation.

  I have 15 x Vdisks each using TB 1.7ish. I have a 2008 Server, who introduced these disks split into a logical drive.

  It is the camera IP camera 70-80 storage. The warning that I receive in my syslog is now below.

  2012-07-16 16:05:33 local6.warning 10.20.0.61 vmkernel: 54:21:18:35.549 cpu3:52729) WARNING: J3: 1361: no space for the log volume 4ea0b5a1-ac9a861a-f047-001018ac574a ("Cam11"). Volume opens in the mode of read-only metadata with limited write support.
  2012-07-16 16:05:16 vmkernel local6.warning 10.20.0.61: 54:21:18:19.257 cpu6:9703) WARNING: J3: 1361: no space for the log volume 4ea0b580-22da22de-1fe9-001018ac574a ("Cam10"). Volume opens in the mode of read-only metadata with limited write support.
  2012-07-16 16:05 local6.warning 10.20.0.61 vmkernel: 54:21:18:02.930 cpu9:52729) WARNING: J3: 1361: no space for the log volume 4ea0b561-e1270828 - 9 d 48-001018ac574a ("Cam9"). Volume opens in the mode of read-only metadata with limited write support.
  2012-07-16 16:04:44 local6.warning 10.20.0.61 vmkernel: 54:21:17:46.631 cpu12:97999) WARNING: J3: 1361: no space for the log volume 4ea0b540-a70fd52c-d347-001018ac574a ("Cam8"). Volume opens in the mode of read-only metadata with limited write support.
  Now, I know that I could go to the v5 and might have of large single vdisks, but y at - there any fix for this?
  Thanks in advance.

  Hello

  This should explain more on the issue: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1010931

• Increase in the Allocation of disk space for the guest system

  I use v.6.5.2 from workstation.  I have a lot of excess space on the hard disk of the host system, but with hindsight I initially did not award a sufficient amount of space for the guest system. Is there a quick (and painless!) way in which I can assign storage drive increased the operating system invited without workstation removal and re-Assembly of?

  Biggar Gordon

  Houston, Texas

  If you are just looking for elements run back, I wouldn't have selected Vista for guest OS... Probably be much better to use XP Pro (SP2) than any version of Vista... On the one hand, XP uses much less space on the disk and other... You can run XP Pro (easily) on a vDisk 16-20GB... IF you're dead set on running VIsta, then get the Business edition and who perform. I would never use any of the editions home for any professional use. Windows 7 is much better than Vista (Windows 7 is commonly called "Vista done right" within the it community). I'm actually using Windows 7 Professional x 64 on two of my systems. I have a XP Pro VM on my system main for when I need either the software which is only able to turn it on, or when I need to test something. Otherwise, I stick with Win7 these days.

  Vista Home (Basic or Premium) are not exactly the wisest choice for operating systems... Especially if you work on this system...

  VMware VCP4

  Review the allocation of points for "useful" or "right" answers.

• New AOL e-mail: one quarter of the screen is blank on the right side, reducing the space for the e-mail subject line. Resize attempts do not work on the right side, so I can't expand the e-mail subject line

  The new AOL E-mail look, which yesterday began a quarter of the screen is blank on the right side, thus reducing the space for the e-mail subject line, which limits its usefulness. Resize attempts do not work on the right side, so I can't expand the e-mail subject line? Running XP pro and Mozilla Firefox 5. No problem with I.E.

  Thank you, these settings were already in place. AOL said now erase the cache, cookies and history... to solve, which worked. (I deleted the cache and a story time.)

• HP Split x 2: not enough space for the Windows 10 update

  I have a Split of HP x 2 (64 GB SSD, drive hard 500 GB) running Windows 10.  I recently received notification of an update of Windows 10 version 1511, 10586.  Trying to install the update, I get an error message saying that Windows needs more space on C:, specifically 8.13 additional GB.

  Settings Windows reports 58.9 gb of 59.2 GB already used on C: which is 47.2 GB ' system and reserved.

  The update program says that I can use another drive for the update and I tried the built in D: (more than 200 GB free) and an external drive (900 GB free), but the update will fail with the same message outside a slight reduction in the amount required on C: (7.17 GB) of free space.

  I had already cleaned useless all the files using the Windows disk clean and have less than 6 GB in applications and data, in order to get rid of everything that would still runs.

  All GB 47.2 OS is really necessary?  Any large pieces I can get rid of, or is the only way an SSD upgrade?

  PeSke

  Only in the last day or two, MS has eliminated a new update of Win10 who, claim, addresses the problems of people said that they do not have enough disk space for the Nov 10 update and when they provide you with an external hard drive, it will not use it.

  I suggest that you are looking for updates and see if it is applied and then retry the update 10 Nov.

  Good luck

• When will install Server 2008 Windows OS. Error Msg 0 x coming 80070070: "do not have enough space for the installation..." Even if I have 20 GB of space? Pls solve this problem immediately.

  When will install Server 2008 Windows OS. Error Msg 0 x coming 80070070: "do not have enough space for the installation..." Even if I have 20 GB of space? Pls solve this problem immediately.

  Hey Shiva,

  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=windowsserver2008r2general

  Please do not hesitate to contact us if you have other questions related to Windows.

• Application error "not enough of space for the environment" in Vista.

  Could not find the right answers out there for this problem. Application error "not enough of space for the environment '. I am running Windows Vista Home Premium. Thanks for your help!

  I suggest you try compatibility mode.
  If the program is not compatible, then you try to install and run the program in compatibility mode.
  Use the following steps:
  (1) right click on the program
  2) click Properties
  3) click on the Compatibility tab
  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.

  If you run Windows 7 Home Premium, you cannot run Windows XP mode, but you can try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other 3rd party software virtualization and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

  Let us know if that helps.

  Marilyn

• Cannot find a volume with sufficient space for the extraction of the file, trying to watch a movie on netflix with Silverlight plug-in

  Install the Microsoft silverlight plug in. it's necessary to watch movies on my vista computer. When I try it is the message I get. Cannot find a volume with enough disk space for the file extraction. This is the message I get trying to watch a movie on netflix.

  Hi cardsharkha,

  I suggest you try the steps mentioned in the link below for cleaning broken Silverlight installation and check if the problem persists

  How to manually clean a broken Silverlight installation

  http://blogs.msdn.com/b/rpomeroy/archive/2008/06/10/how-to-manually-clean-up-a-bad-Silverlight-installation.aspx

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• Partitioning hard drive, I want to spend 30/40 GB drive and the remaining space for the creation of other partitions.

  I created a recovery disc for my system that I bought the new laptop.
  It consist of 500 GB HARD drive, now the problem is the C - drive which is my WIN7 Home Basic installed occupies 400 GB of space and the D-drive has only 25 GB.
  My problem is I want to partition the drive C so that the other player must occupy the space according to my condition.
  But here its only gives me half the space to shrink.
  I mean, when I opened diskmgmt to shrink, C this is 200 GB disk space allotted to me.
  Medium I can use this space to create other partitions, but what I want is, I want to spend 30/40 GB C drive and the remaining space for the creation of other partitions.
  Help, please... Thnks...

  That's what we tried to tell you. An OEM installation does not lend itself to change and having to clear guarantees for re-setup means that you must be quite certain that you have other reliable ways to re-setup.

  If you want to dabble with Linux or dual boot, you should buy a complete commercial edition of Windows 7 that will give you more flexibility and accept that for drivers etc, you're on your own...

• Hello! I have CS5.5 Production Premium installed and now downloaded and installed CS6 PP Upg. Problem is the lack of space on the disk. What I can uninstall 5.5 or the Upg 6 should it work? I can move the 6 if necessary.

  Hello! I have CS5.5 Production Premium installed and now downloaded and installed CS6 PP Upg. Problem is the lack of space on the disk. What I can uninstall 5.5 or the Upg 6 should it work? I can move the 6 if necessary.

  Upgrades need not have the old version installed in order to work properly.  You can remove the old version if you wish.

• When you try to install Acrobat 9 Standard to my HD Setup outboard seems stuck on C:\ and I can't move on a disk with enough space for the installation.  What can I do?

  When you try to install Acrobat 9 Standard to my HD Setup outboard seems stuck on C:\ and I can't move on a disk with enough space for the installation.  What can I do?

  You will need a bigger c. For everything that you can move there will be 10 things, you can't. Software installation puts the huge amounts of information in the Windows Installer on C database.

• Remove empty space for the search query entry

  Hi guys, I am currently using JDeveloper 11.1.2.1.0
  
  I created a search with the use of criteria to display, query and table, which works perfectly with success.
  
  But I would like to improve the research by removing the empty space for the entry. For example, search for the name (with the search operator = Contains):
  
  Entry: Adam-> Works Fine!
  Entered: < space > < space > Adam not work :(
  
  I would like to remove the empty space at the beginning of the end (trim()) part of the entry.
  
  Any suggestion or comments?

  Please take a look at this thread
  publish in the search criteria for the ADF

  Seems to be the same requirement.

  concerning
  Peter