Local test run of Viewplanner, AutoIt error failed 'error in the expression' command-line viewplanner.exe 11256

Hello

After a few fights, I managed to have the test run to start in a local race, however, after some time AitoIt script crashes with "error: error in the expression ' (see attached screenshot). After a while the workload gets killed as indicated on the log_goldendesktop.txt

2013-11-14 11_38_18-10.24.157.198 - Remote Desktop Connection.png

What can I do?

Thank you

Please download the newspapers. I looked at the newspapers and it seems that it is a failure on video-play. Can you ensure that Windows Media player is installed?

Tags: VMware

Similar Questions

  • "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

    I have QQ (an international chat program) installed on the laptop. Then my hard drive crashed. Now when I try to reinstall it on my new hard drive I get the following message:

    "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for details" -how can I solve this problem? I have Windows 7.

    Hello

    Thanks for choosing Microsoft Community to post your question.

    It seems that you can not install application QQ, you get an error: "the application could not start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

    We're here to help and guide you in the right direction. This problem could be caused when the computer is missing the correct C++ run time for your type of system components. (x 86 or x 64).

    Here are a few troubleshooting steps that you can try to solve this problem.

    Method 1: we will install Microsoft Visual C++ for your computer package.

    Note: If you use the 32-bit operating system, download and install 32-bit edition(X86).

    If you use the 64-bit operating system, download and install edition(X64) 64-bit.

    Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86)
    http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=A5C84275-3B97-4AB7-A40D-3802B2AF5FC2&displaylang=en

    Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64)
     http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

    Package redistributable Microsoft Visual C++ 2010 (x 86)

    http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84

    Package redistributable Microsoft Visual C++ 2010 (x 64)

    http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867

    Method 2: Run the fixit available at the following link.

    Solve problems with programs that cannot be installed or uninstalled

    http://support.Microsoft.com/mats/Program_Install_and_Uninstall

    Also, check the event log using Event Viewer.

    Please see the link below for more information on how to use Event Viewer to check the error message or information,

    http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

    If you have additional problems, please reply to this post and we will be happy to help you further.

  • WINDOWS 7 error the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

    «WINDOWS 7 error the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.»

    This cams almost for all the applications that I try to open. I read all kinds of things to solve problems, but I can't install anything because it is constantly on the screen.

    I think it's like that because my computer shuts off when I was doing the system restore, because he has not started.

    I don't know what to do.

    Hello

     
    You can view the event log by using Event Viewer. See the link below for more information about how to use Event Viewer to check the error message or information,
     
    Please check the information in Event Viewer and let us know the problem more briefly for a better solution.
     

    Method 1:
    However, try the SFC (System File Checker) scan on the computer. Check out the following link to do the same thing:
    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929833
     
    Method 2:
    You try to run the fixit given in the following link and check if it works:
  • The application has failed to start because its side-by-side configuration is incorrect. See the application event log or use the command-line sxstrace.exe for more details

    Hello

    I can t open Google Earth or Microsoft Office programs because I get this message - the application could not start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe for more details.

    A few days ago I could open all what programs. I put t know what is the problem.

    I did sxstrace and that's what I have-

    =================
    Launch the activation context generation.
    Input parameter:
    Flags = 0
    ProcessorArchitecture = Wow32
    CultureFallBacks = en-US; en
    ManifestPath = C:\Program Files (x 86) \Google\Google Earth\client\googleearth.exe
    AssemblyDirectory = C:\Program Files (x 86) \Google\Google Earth\client\
    Application configuration file =
    -----------------
    INFO: File analysis shows C:\Program Files (x 86) \Google\Google Earth\client\googleearth.exe.
    INFO: Manifest definition identity is (null).
    INFO: Reference: Microsoft.VC80.CRT, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.4053"
    INFO: Resolving reference Microsoft.VC80.CRT, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.4053".
    INFO: Resolving reference for ProcessorArchitecture WOW64.
    INFO: Resolving reference for the neutral culture.
    INFO: Application binding policy.
    INFO: No found publisher policy.
    INFO: No redirect political connection is found.
    INFO: Start the detection of assembly.
    INFO: Can't find the assembly in WinSxS.
    NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC80.CRT\8.0.50727.4053__1fc8b3b9a1e18e3b\Microsoft.VC80.CRT.DLL.
    INFO: Found no manifesto for the neutral culture.
    INFO: End detection of assembly.
    INFO: Resolving reference for ProcessorArchitecture x 86.
    INFO: Resolving reference for the neutral culture.
    INFO: Application binding policy.
    NEWS: Control strategy of the Publisher C:\Windows\WinSxS\manifests\x86_policy.8.0.microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.5592_none_517247830f45081d.manifest
    INFO: Start the detection of assembly.
    INFO: End detection of assembly.
    ERROR: Activation context generation failed.
    End activation context generation.

    Help, please!

    This type of error can be caused if the Visual C++ library runtime components are missing or because of a third-party software.

    Follow the steps below:
     
    Method 1:
    If the problem is caused by the lack of Visual C++ libraries, you can download and install the Runtime components of Visual C++ libraries from the link below:
     
    This error can occur when the Microsoft .NET Framework installation on the computer is damaged or is missing.

    Try it out below step to reinstall and repair installation of Microsoft .NET Framework on the computer, then check if you can install the software.

    (a) click the Start button, select Control Panel, click programs and then click on 'Turn Windows has or not.' If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    (b) search for Microsoft .NET framework 3.5.1 uncheck, click OK and restart the computer.

    (c) after the reboot, open again "Turn Windows features on or off" and place a check next to Microsoft .NET framework 3.5.1 and restart the computer.

    Step 2

    If the previous step fails, then I suggest that you manually download and install Microsoft Visual C++ 2005 and 2008 Redistributable Package and check to see if you can install the software.

    In programs and features, you do not show that you have installed Microsoft Visual C++ 2005 Redistributable and Microsoft Visual C++ 2008 Redistributable? If this is not the case, download the links here.
     
    Package redistributable Visual C++ 2005 (X 86)
     http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=32BC1BEE-A3F9-4C13-9C99-220B62A191EE&displaylang=en
     
    Visual C++ 2005 (x 64) redistributable package manager
     http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=eb4ebe2d-33c0-4A47-9dd4-b9a6d7bd44da&displaylang=en

    Package redistributable Microsoft Visual C++ 2008 (x 86)

    http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en

    Package redistributable Visual C++ 2008 SP1 (x 64)
     http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

    I hope this helps.

  • Error: no 1639 invalid command line argument. Consult the installer of Windows S

    Hello

    I am trying to install Oracle 10 g Express on Windows XP SP3. A few seconds after clicking on 'Install' in the Summary window, I get the following error message:

    "Error: no 1639 invalid command line argument." Check the kit of development Windows Installer by using the detailed command line. »


    Anyone know what to do?


    Peter

    Please go through the following link (does not directly apply in your case).

    http://support.Microsoft.com/kb/326027

    HTH...

  • local windows for DBCA rem GUI error at the opening of the screen on a machine

    Hi Chaps,
    I connected the remote machine using putty SSH from my local PC windows
    I put on my mahcine linux5 remote as the environmnet
    $export DISPLAY = 10.96.5.153:0.0
    and running xclock on the remote computer to see the GUI on my machine (10.96.5.153) local. Unfortunately, I got an error
    "Error: can't open display: 10.96.5.153:0.0'"
    the idea of doing above is to call DBCA GUI on my local machine
    can you please enlight your experience? any solution to this will be appreciated.

    Thank you
    QA

    Published by: QAbdul on May 11, 2010 03:55

    Hi QA;

    I put on my mahcine linux5 remote as the environmnet
    $export DISPLAY = 10.96.5.153:0.0
    and running xclock on the remote computer to see the GUI on my machine (10.96.5.153) local. Unfortunately, I got an error
    "Error: can't open display: 10.96.5.153:0.0'"

    you use X transfer? Or you use a program such as VNC or Xming?

    If you use VNC, you must follow:

    1. check vnc is running or not

    The VNC Server service status< if="" its="" return="" xvnc="">

    start the VNC Server service

    2 vncserver (if you run the first time it will ask you for the password, enter the valid password)
    3. as user root

    Export DISPLAY = linux_machine_hostname(or_IP_of_linux):1.0
    xhost +.

    4. install the Vncviwer on your machine and then enter
    linux_machine_hostname(or_IP_of_Linux):1.0 and pass

    5 from the menu vnvviwer

    Su - oracle

    You can then run DBCA

    Respect of
    HELIOS

  • Running a Seq file when running the GUI (command line option) return an error

    Hello

    I use a LabVIEW based UI to run/execute a file in sequence by using the command line option. My command line is "Test DUT' D:\QF\GUI-test-Sequential.seq D:\QF\GUI-Test.exe - runEntryPoint

    When I ran the get 3 popup saying that some of the perameters 'is not a valid file of LabVIEW"(see attachments). No idea how to avoid these messages? (The user interface works very well and runs the entrypoint of the USE Test)

    LabVIEW 8.5

    TestStand 4.1

    Thank you.

    Hi Tom,

    When you create a new application to your specification to Build, you must set the 'Pass all arguments for application command line' in the Advanced tab.

    Once you do that it should all work.

    Concerning

    Ray Farmer

  • The use of the VMWare command line error.

    VMware version: 7.1.0 build 261024

    Windows 7

    I'm trying to use the command line to launch a virtual machine using the instructions found on the website of vmware.

    That's what the chain of command line should be:

    "C:\Program Files (x 86) \VMware\VMware.exe - x C:\Users\xioc1138\Documents\Virtual Machines\Windows 7 x64\Windows 7 x64.vmx".

    However, when I try to create this short cut, I get the following error:

    The file is not found.

    So, I tested each segment of the chain of the "Run" dialog of Windows to see if they work.

    Run the first half, VMware opens.  The second half run VMware opens to the specific machine that I'm opening.

    Combine them: fail.

    When I try to run the entire string in the dialog itself, I get several interesting error messages:

    VMware Workstation:

    Unable to open computer virtual: c:\Program Files (x 86) \VMware\VMware Workstation\x64.vmx.

    Could not open the file "C:\Program Files (x 86) \VMware\VMware Workstation\x64.vmx ': the system cannot find the specified file.

    And in a second area of error:

    VMware Workstation:

    '7' is not a virtual machine configuration file (vmx).

    Note that "VMware Workstation" indicates the name of the window opening.

    Any thoughts on what I might need to do to fix this?

    Hello and welcome to the forums.

    It is probably the space in the path and/or file name (C:\Users\xioc1138\Documents\Virtual Machines\Windows 7 x64\Windows 7 x64.vmx") which is the origin of the problem.  To remedy this, you can try renaming the paths and file names, using short file names (C:\Users\xioc1138\Docume1\Virtua1\Window1\Window1.vmx') or try to encapsulate your path information in quoatation marks.  Sometimes, it may also be easier to create a vbs or fighting the file to launch the shortcut.

    Good luck!

  • "Error: unknown protocol: c ' on the install command line + launch, after 'Throw error' on FB4 install + launch

    Just try to get AIRHelloWorld.as installed and launched on the Simulator, and I encountered some problems.

    With the help of FB4 (v4.0.1), I get the following by following the instructions at http://docs.blackberry.com/en/developers/deliverables/21877/Testing_your_application_from_FB4_134713...

    for the configs of type "Run", he pretended to install and launch, but does nothing. ".

    for the launches of type "Debug", after he sat down to "Waiting for Adobe Flash Player to connect to the debugger" for awhile:

    "The launch has failed."

    "Failed to connect; session has expired.

    Ensure that:

    1. you have compiled your Flash application with debugging on

    2. you run the debug version of Flash Player. »

    The advice of the thread here - http://supportforums.blackberry.com/t5/Tablet-OS-SDK-for-Adobe-AIR/Launch-Failed-Launching-Error/m-p... - I went to try from the command line with the following command:

    > blackberry-airpackager-bin-debug package AIRHelloWorld.bar - installApp - launchApp - C AIRHelloWorld - app.xml AIRHelloWorld.swf - device 192.168.152.128

    That I get:

    "Error: unknown protocol: c.

    Any help is appreciated.

    Alrighty, for those who wish to learn from my mistake, do not use the default path to your workspace in Windows XP. Place your project files in a path that has no spaces in it. Otherwise the code that reads XML application descriptor will throw and give you this completely useful message on the "unknown protocol".

    For more information...

    According to SUN ( http://bugs.sun.com/view_bug.do?bug_id=6506304 ), it's a regression of jdk1.5, so it can be bound to the version of Java that was used to create the blackberry airpackager. My recommendation to any dev BBPB watch this forum is to use another (earlier? Since jdk6 won't necessarily be released because of the Oracle) jdk for the set of tools... you know, if you want to support default Windows XP installed and you have the time. The solution is pretty easy once you know.

    Alrighty, now off to see if things work!

  • Run the VI command line in Windows 7

    I try to open a VI and do it run whenever called from the command line.  I am running Windows 7 and LabVIEW 2009.

    I followed this guide to get me started.

    First, I marked my VI "run the opening:

    I therefore call on my command prompt similar program:

    "C:/Program Files/National Instruments/LabVIEW 2009/LabVIEW.exe" "C:/User/Desktop/test.vi"
    

    If I already open LabVIEW and running in the main menu, then it opens my VI perfectly without any problems.

    However, if I don't already have LabVIEW open, it opens LabVIEW as she normally does, but it only loads to the main menu.  It doesn't load any of my VI.

    Does anyone know if this is expected behavior, or how can I fix this so that it opens upward Although LabVIEW is currently closed?

    Well... I managed to do work haha.  If you come to ignore the document and open the file via the command line, it opens fine.  I don't know why they say that you can use the command line argument LabVIEW.exe.

    "C:\User\Desktop\test.vi"
    
  • The fix command line install ColdFusion 11 9 fails

    When I run the patch from the command line by using this statement:

    D:\ColdFusion11\jre\bin\java.exe-jar D:\ColdFusion11\cfusion\hf-updates\hotfix_009.jar-i silent f D:\ColdFusion11\cfusion\hf-updates\my-server-name.profile

    I get the following error:

    Error: Could not find or load the class main D:\ColdFusion11\cfusion\hf-updates\hotfix_009.jar

    I also seems to ignore the profiles option, because I see the following new folders in the C:\ drive.

    C:\ColdFusion11

    C:\hf-updates

    C:\hf-11-00009

    Is the broken 9 patch, or is this just me?

    [This message has been edited, I have removed superfluous information.]

    My my-server document - name.profile has been altered causes a problem during the installation.  Corrected a .profile file using has solved the problem.

    INSTALLER_UI = SILENT

    USER_INSTALL_DIR = D: / ColdFusion11

    DOC_ROOT = D: / ColdFusion11/cfusion/wwwroot

    #The following only applies to multi server scenarios.

    INSTANCE_LIST = cfusion

  • Try to run a telnet from the DOS command line session. Or anything else.

    I am new to windows 7 and I'm not a technical person, but I use the DOS command window to start a telnet session on my XP machine for years. For some reason, I am unable to do it with my new WIN7 machine. I am also able to cd to another directory. I'm sure it's something really simple that is not obvious to me.

    Here is the error:
    U:\>Telnet columbia
    'telnet' is not recognized as an internal or external command
    operable program or batch file.

    Go to Control Panel > programs > or turn off Windows features turn on , defiler, scroll down, put a check mark in the Telnet Client check box, and then click OK .

  • expdp/impdp method in the database upgrade from 11.2.0.4 to 12.1.0.2 an error in logic of "command line"?

    Hi DBA:

    We are evaluating different methods of upgrading 11 GR 2 DB to 12 c (12.1.0.2) this year, it is very important for us to use the right method.  It was reported that when DB version was 9i and has been updated to 11g, there were some order of tables 'line' was wrong when execute SELECT statements in application (Java application) - at the moment I didn't if it is ' select * from... "or any specific part with a"where"clause, and what type of data was wrong (maybe sequence CLOB data, etc.).

    I think I know, ' exp/imp', "expdp/impdp" logical backup of DB methods.  Therefore, Oracle automatically import data and fix it in each table.  If no error in impdp connects after it's over, should not be any mistake, right?

    If the use of the method of 'creates a new data + expdp/impdp basis for schemas user' 11g 12 c port data, questions:

    1. this method will lead to erroneous sequence data when ordering?  If so, how to re - generate the sequence number?

    2. this method can bring CLOB, BLOB data and without any errors?  If error, how to detect and repair?

    I use the same method in the 10.2.0.5 to 11g port data, no problem.

    I'll keep this thread posted after getting more information from application.

    Thank you very much!

    Dania

    INSERT... SELECT, CREATE TABLE in the SELECT and Export-Import will all "re-organize" the table by assigning new blocks.

    In place--update (using DBUA or command line) don't re-create the user tables (although it DOES not rebuild the data dictionary tables).  Therefore, does not change the physical location of lines for user tables.  However, there is no guarantee that a further reason for INSERT, DELETE, UPDATE instructions does not change the physical location of ranks.  Nor is it a guarantee that a SELECT statement will return always stored in the same order unless an ORDER BY is specified explicitly.

    If you export the data while it is still used, you don't avoid update sequences in the source database.  Usually results in a mismatching number sequence between the source database and the new database (imported). In fact, even the numbers may be different, unless you use CONSISTENT or FLASHBACK_SCN.  (These two options in exp / expdp do NOT prevent update sequences).   The right way to manage sequences is to rebuild or increase them in data imported with the values in the data source, once the import is complete.

    Hemant K Collette

  • Cannot run business ruleset using the Launcher command line for the calculation Manager

    Hello

    I use the Hyperion 11.1.2.2 planning version. I am trying to execute a business rule defined via the calc Manager command line utility. Please see the order form below,

    D:\Oracle\Middleware\user_projects\epmsystem1\Planning\planning1 > CalcMgrCmdLineLauncher.cmd /U:HBRadmin D:Capex /A:CORP S:Capex_Nightly

    At the launch of the above command, the utility starts and ends without triggering the rule in the database. See log info below,

    Local planning: en_US

    using java.library.path: D:\Oracle\Middleware\EPMSystem11R1/products/Planning/lib64

    EPM_ORACLE_HOME (D:\Oracle\Middleware\EPMSystem11R1) has the value of the property 'EPM_ORACLE_HOME' of the JVM.

    using the property of Java for Hyperion home D:\Oracle\Middleware\EPMSystem11R1

    For the non - RFP app, ask size is not necessary

    EPM_ORACLE_INSTANCE (D:\oracle\Middleware\user_projects\epmsystem1) has the value of the [EPM_ORACLE_INSTANCE] property of the JVM.

    Support RTC Essbase Version: 0xb1221

    null

    But if I try to execute a business rule with the calc Manager command-line utility, it works well. It is only rules base which poses problem. Please note that this set of rules is to have business rules that belong to a database that is Capex.

    Any help on this request would be much appreciated. Please notify.

    Thank you

    AP

    Please ignore this request,

    I found the KB article below

    Hyperion Planning Rulesets cannot be launched using the CalcMgrCmdLineLauncher planning (Doc ID 1453630.1)

    Thank you

    Arun

  • The developer command-line tool Setup error

    Hello

    I had a hard time trying to install the tool developer for the AEMM, since that it was released yesterday.

    Here is what I get after the execution of the installation in root mode command line:

    Anyone who managed to install the tool?

    NGP ERR! Darwin 15.3.0

    NGP ERR! argv ' / usr/local/bin/node "" / usr/local/bin/NGP "'install'"-g"'aemm.

    NGP ERR! node v5.8.0

    NGP ERR! NGP v3.8.3

    NGP ERR! path /usr/local/lib/node_modules/aemm/bin/aemm.js

    NGP ERR! code ENOENT

    NGP ERR! errno - 2

    NGP ERR! syscall chmod

    NGP ERR! ENOENT ENOENT: no file or directory, chmod ' / usr/local/lib/node_modules/aemm/bin/aemm.js'

    NGP ERR! ENOENT ENOENT: no file or directory, chmod ' / usr/local/lib/node_modules/aemm/bin/aemm.js'

    NGP ERR! ENOENT This probably isn't a problem with the NPM itself

    NGP ERR! ENOENT and is linked to the NPM is not able to find a file.

    The command line tool is still under review and will be available soon. We'll let you know when it is available.

Maybe you are looking for

  • A broken iPhone 5, now using 3GS

    A broken my iPhone 5, now using old iPhone 3 g. How can I register 3GS when I need another device verification code? When I use the iPad to get the code, the 3GS does give me not an option to put this code.  Help! Thank you

  • Change icons with Firefox 12.0 bookmark (Favicon does not work)

    I would like to change some of the icons in my bookmarks toolbar and some Add on Favicon Picker, but it does not work with Firefox 12.0 proposed. Is there something else I can do? Thank you

  • Reading 1 hour .wav file

    Hello! How to read the record of one hour in intervals of 60 sec?

  • Camera in use by another program

    Hello Very compatible with Windows Live Messenger build 14.0.8050.1202 problem (error message in the subject) Skype cannot depend on camera, no error message. Rixio - error message "selected video device failed. It's just after the restart. Sometimes

  • Help me understand the Vista backup

    I just started using Vista backup to backup my PC to an external hard drive.  There are several things I want to ask about the Vista Backup utility. 1. with many other backup programs (by example, utility backup Windows XP), I was able to review what