Localizer.dll library: Localizer.

Similar Questions

• can I create a DLL file for labview that has DLL library with inside?

  Hello everyone,

  I am developing an application for the cards PCI devicenet in labview (beginner to labview) environment.  Is there a DLL file for the PCI card from the provider. But it's too complicated for a beginner to call each function in the DLL of labview. Therefore, I'm trying to re - use a VC ++ program (working properly) that calls some sellers DLL library functions.    To do this, I created the DLL file which includes all headers and libraries the provider DLL, as indicated in the attached figure. But I couln can't see the effect on the device. is it possible to create a DLL file for labview that has DLL library with inside? If this is not the case, how can I implement the program shown in figure?

  I would like to wish a huge as to advance.

  It is not something I have a lot of experience in so I don't know all the details of the restrictions or requirements etc - but it is certainly possible to create wrappers for the dll and then use them in LabVIEW - this is sometimes necessary to convert some native types/data structures in C/C++ into something that you can switch to your other DLL LabVIEW.

  There is a link here: http://digital.ni.com/public.nsf/allkb/06ECDC689DDA0F3D862574440074CD95

• the procedure entry point ARCCON_GetConnectMRASetting be found in the dtnamic ArcCon.dll library.

  the procedure entry point ARCCON_GetConnectMRASetting be found in the dtnamic ArcCon.dll library.

  How can I erase this on my desk. Newbie here.

  I don't mean to install Windows 8

  Hi irishmama,

  • What ArcSoft program you try to uninstall?
  • Have you tried all the steps mentioned in the previous post?

  If you have tried all the steps mentioned in the previous post, then try the step below.

  I suggest that re-download you and install the program and try again later to uninstall.

  You can also try post your query in the forums of ArcSoft.

  http://www.arcsoft.com/forum/default.asp

• SQLite3-wal-point control cannot be in SQlite3.dll library message appears at startup with windows 7 starter 32-bit system.

  SQLite3-wal-point control cannot be in SQlite3.dll library message appears at startup with windows 7 starter 32-bit system.

  Don't worry about this - I fixed it by following the steps below...

  Thanks anyway! :-)

  1. Temporarily close the anti-virus software and firewall
  2. Open the control panel configuration, programs and features or Add (and remove programs) and go to the section uninstalling
  3. Remove all Apple products in this order - iTunes, Quicktime, Apple Software Update, Apple Mobile Device Support, Hello, Apple Application Support.  You don't need to remove Safari
  4. Restart the computer
  5. Go to Apple.com and download the latest version of iTunes
  6. Re-install

• Facilitate communication instrument via VISA/dll library

  Hi, I just receive a new piece of equipment that I would like to order via Labview and I am having trouble to communicate began with the device - a spectrometer in Acton (previous on the topic post). The device can connect via a usb or RS-232 cable and appears in as COM 5 and correctly Device Manager the label as the spectrometer of acton.

  I have the instrument dll file and the header file and a detailed description of all the functions but I'm scared, I am at a loss to know how to start. I already wrote labview programs to communicate via the read/write functions VISA but this instrument communicated through hexagonal orders and seemed easier for me to work with this new instrument where it looks like I need to send commands to chain - I'm getting lost in the syntax and correct structuring of the functions. The node to call a library function lists the functions of the dll, but I'm not clear on how to take of the generic Sub funcname (void); and match it to their arguments and the functions described.

  I'm also not sure what options I have to communicate with the instrument, is using the dll with node to call a library function at a level equivalent to sending a command string via the entry VISA, or are what they used in combination or can the nodes to call a library function be used alone for release with the instrument? I understand that these questions are very basic/generic I have just had trouble finding resources to learn the answers to these questions as links to be NEITHER documentation/examples or other messages from the forum would be greatly appreciated.

  I am including as an example some info on the first basic command I would start as per - a simple device search command:

  ----------------------------------------------------------------------------------

  "detailed description":

  ARC_Search_For_Mono, function used to search for attached Monochromators. With the
  exception of ARC_Ver, must be the first function call.
  Delphi: function ARC_Search_For_Mono (on Num_Found: integer): wordbool;
  STDCALL;
  VB: Private Declare Function ARC_Search_For_Mono Lib "ARC_SpectraPro.dll".
  (Num_Found As Long) As Integer
  Num_Found: The number of research Instruments Acton found and listed.
  Enumeration list begins with zero and ends with Num_Found minus one.
  Result: True, if all of the instruments where found.

  ----------------------------------------------------------------------------------

  a code in the dll header file:

  typedef unsigned _int16 (CALLBACK * LPFNDLL_Search_For_Mono) (long &);)

  ----------------------------------------------------------------------------------

  Any help would be appreciated, I think I just need a little help to get started. Thanks in advance!

  Because you neglected post in the the model number of this intrument, everything would be conjecture at this point.

• Help! USB mpusbapi.dll library

  Hello!.
  I am having some problems trying to manage the USB communication in BULK.
  I have no VISA but tries by library (specifically mpusbapi.dll). I did everything right (tell me if I'm wrong) and I can run the program and it ends without any problem, but I did not receive the communication.

  something causing me strange is that when he gets back to the MPUSBOPEN of the library function, it gets the same number for the entry and exit, something like "4294967295". so I guess that the problem may be in the hole in the pipe.

  occasionally I send you the number '5' in an 8-bit integer of a PIC18F4550 in accordance with the code of the CCS:

  usb_put_packet (1A, 8, USB_DTS_TOGGLE);

  the configuration of CEB to the USB header is:

  #define USB_HID_DEVICE FALSE / / deshabilitamos el uso las directivas HID
  #define USB_EP1_TX_ENABLE USB_ENABLE_BULK / / put the EP1 (EndPoint1) for IN bulk/interrupt transfers
  #define USB_EP1_RX_ENABLE USB_ENABLE_BULK / / put the EP1 (EndPoint1) for bulk/interrupt transfers
  #define USB_EP1_TX_SIZE 32 / / size to allocate the endpoint buffer 1 tx
  #define USB_EP1_RX_SIZE 32 / / size to allocate the endpoint buffer 1 rx

  If it is necessary I can download also the descriptor C define; tell me; and of course I am downloading of the VI.

  After working, I will solve the problem. I developed a vi, thatâ throw the microchip usb library sends and writes the data to a pic18f4550 (it doesn't matter witch CPU it is, just takes a one chip).

  Bye and hope it helps someone.

• Cannot find the function in the dll library

  I'm trying to use the function I build in a C++ of Labview "Call library function" dll, but it cannot find the name of the function "Add" or "divide". Attached my .dll, file .cpp and screws, could you help me to find out where is the problem?

  The only function exported in your original of the CPP file is the

  add_num()
  

  function. Declare the object as static methods does not export them. It just creates methods of objects that do not have an implicit object as the first parameter pointer and so these functions cannot reference the data object members (but your class has none yet).

  Essentially if you intend to do all your static class methods, using a class is actually pretty meaningless. You would be better with simple standard C functions as your add_num() function is.

• Cannot print: error in the kernal 32.dll library?

  Original title: unable to print from computer but able to print from the Internet error: entry point Disble Thread library called could not be located in the core of library links 32.dll dynamics.

  I can print from the internet, but not my machine.

  OT: Get error message; "Disble library thread calls the entry point not found in the dynamic link library kernel 32. dll" he is first asked to print an Excel document

  I have now resolved the issue.  It seemed to come from the Adobe Reader. It has been uninstalled and reinstalled and it seems to have solved the problem.  Thanks for your help anyway.

• error: C:\windows\system32\SHELL32.dll - updated Microsoft DLL library

  Hello, I would like to find answers to the following question. I have a problem to instal: PaintShopPro/Corel/Photo X 2.

  After you insert the CD-ROM disc, I get this error message: C:\Windows\System32\SHELL32.dll,: could not install. Please get Microsoft

  Library DLL-implementation to date.

  Thanks for any help.

  Sincerely yours

  Josef Rysavy

  E-mail address is removed from the privacy *.

  Hi JosefRysavy,

  You are able to correctly install the other applications?

  I recommend you contact Corel support for assistance.

  Hope the helps of information.

• My system crashed and I got this message "c\windows\system32\nvcpl.dll - a dynamic link (dll) library initialization routine failed.

  Original title: c\windows\system32\nvcpl.dll

  My system crashed and somehow, I was able to find it. c\windows\system32\nvcpl.dll - a library (dll) dynamic link initialization routine failed. Complete reinstallation of my netbook, it worked for 1 day and then resurfaced. Then it happened to my office. I can't get into my netbook to solve it without a complete reinstall, and if it works only for 1 day again then it's a waste of time. Help, please.

  Hello
   
  'c:\windows\system32\nvcpl.dll' is the NVIDIA Display Properties Extension.
  I suggest that you follow these steps and check to see if they help.
  Step 1:
  Start your computer in safe mode and check if you get the error.
   
  Step 2:
   
  a. your video card drivers probably needs to be reinstalled. Visit the manufacturer of the laptop computer support Web site to download the correct adapter for your specific model of laptop drivers.
  b. obtain the latest driver for the chipset and update the BIOS as well.
  
  Warning of the BIOS:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
   
  Step 3:
   
  Before installing, uninstall the old drivers.
   
  a. click on start
  b. Control Panel,
  c. open the applet, add / remove programs
  and look for your video drivers uninstall.
   
  Step 4:
   
  After you install a new set of drivers.
   
  a. right-click on your desktop and select Properties
  b. click settings, change the color quality "highest (32 bit), then adjust the resolution of your screen to your liking, then click on apply.»
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• error message recurring 573 Ordinal not found in the iertutil.dll library of dynamic links when I try to open some windows.

  error message - 573-Ordinal not found in the dynamic link library iertutil.dll when I try to open some windows. Also when trying to open windows help, says it is not found. Any suggestion is welcome.

  Had the same problem and fixed it. Had tried all ideas that Microsoft had and that they did not fix the problems. I have seen that many peoples problems began after may windows update (mine did at), found two dealing with update to IE9. I uninstalled both and that fixed the problems. The numbers update
  KB2820197
  KB2847204
  After you have uninstalled those reboot and everything so well.

• How can I recover hal/dll library - computer restart without warning

  My computer kept restarting with warning message. Detectors of viruses and malicious software nothing - nothing did fall within the firewall either.  When we tried to recover to an earlier point (it started when Microsoft had us install malicious programs) the hal.dll file had been corrupted or deleted.  This message came when we tried a system restore.  We do not have a disc XP from Microsoft.

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that put you the computer in start mode normal as suggested article above.

  It will be useful.

• I get a message on start up _ 'create the Xml reader that is located in the XmiLite.DLL library

  This erases all the videos and other features of my computer. Geek Squad said it was a Microsoft problem. There should be a load down to fix it. I don't find that the load down.

  XmlLite execution file

  The execution XmlLite, Xmllite.dll file, is built into the operating systems and the following products:

  • Windows Server 2008

  • Windows Vista

  • Windows XP with Service Pack 3 or later.

  • Windows Server 2003 with Service Pack 2 or later.

  • Microsoft Internet Explorer 7 and later versions.

  Please start the command prompt (cmd.exe) with admin rights [1] and run sfc [2]:

  sfc.exe/scannow
  
  He is able to find and repair broken files? the XMLLite.dll is now restored?

  Best regards
  André

  [1] http://windows.microsoft.com/en-US/windows7/How-do-I-run-an-application-once-with-a-full-administrator-access-token
  [2] http://support.microsoft.com/kb/929833 "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Reference to Struct to DLL (library function call)

  I have two functions written in C, which takes the reference to a struct.

  Statements:

  IpAddress_Parse (IpAddress, address const kChar * text)

  ConnectIpAddress (connection, const kIpAddress * address)

  typedef struct IpAddress
  {
  int version;
  address to unsigned char [16];
  } IpAddress;

  Extracted from:

  Sub main (int argc, char * argv)

  {

  IpAddress ipAddress;

  IpAddress_Parse (& ipAddress, "12.0.1.10");

  ConnectIpAddress (connection, & ipAddress);

  }

  I'm trying to convert above in LabVIEW, but are struggling to. I tried to create a Cluster in LV and analyze the data of IpAddress_Parse() and pass it to ConnectIpAddress() as "Adapt to the Type" nothing helps. Even though I have artificially build a Cluster to move to ConnectIpAddress(), I mistake 1097 of LabView. My cluster included an int and a byte array that follows typedef struct IpAddress.

  Please provide some indication that what I'm doing wrong. Thanks in advance.

  Please submit your LabVIEW code. The IpAddress cluster must contain a 32-bit integer value and a nested group containing 16 U8 values. You can not replace an array of fixed length C with an array of LabVIEW; You must use a cluster containing the same number of items instead.

• Could not load the wxfw.dll library at startup error

  I uninstalled the weather channel and now whenever I turn on the computer, I get this message. An error code 126

  I would not apply any of these ideas MSE - that has nothing to do with your problem.

  A system restore I wouldn't do either.

  If use you msconfig to disable the item, it can make the message go away, but that will leave you with a sloppy XP configuration.  The msconfig program is a troubleshooting tool - not a Startup Manager.  You have to solve the problem and the difficulty not only the symptom of the problem.

  I would like to download and install either CCleaner or Autoruns.   These two run only "we demand" and don't install not install all the elements on your system to slow down.  There are other popular boot managers, but something like CCleaner has other things in there you might like too.

  Then take a look at the entries to start your computer.

  If you use Autoruns, start it and look at the tools, start-up and located at the entrance of offending startup and disable it.  Restart, and if you are satisfied the problem is resolved, you can use CCleaner to then remove the offending entry from your startup list.

  If you use Autoruns, run Autoruns.exe and expect that it ends the filling of the list of entries.

  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.

  The problem is usually to start the system or the user startup entries, then click the logon tab
  and see if the startup item is there.

  Scroll through the list and look for a boot entry associated files in the error message.

  If you can't find on the connection tab, look in any tab.

  You can also click file, search to search for logon, or any tab for all or part of the name of the element.

  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.

  If you decide that you don't like CCleaner or Autoruns, just uninstall them.