Located in CallingNumber of Script during call transfer

I want to define the "caller number" in the transmission of calls to an outside line. I know that I could hide the number through the handler calls, but that would allow me to change the number of base on every script that I use.

The only solution I can think of that's at the level of the cti port, where you will configure groups separate jatpi for each request so a script. Then configure the mask of external telephone number on the cti to the appropriate ports.

HTH, please rate all useful messages!

Chris

Tags: Cisco Support

Similar Questions

  • No Audio with call transfer to the CUE Script

    Hello

    I have a CUE script set up to dial several extensions and transfer them to a conference MeetMe hosted on the same 2911 router where the CUE ISM is installed. The call flow is:

    CUCM 2911 <---> <--->CUE

    with calls to the script being initiated by phones registered with the CUCM.

    Dial the pilot script, calls to the specified extensions are undertaken and transferred to the DN MeetMe (7070) successfully, but there is no sound on calls. The script seems to complete successfully as well, because all of the extensions as well as the original one is transferred to the DN MeetMe. The command "display the compact active voice call" shows all participants connected to 7070 and the output of 'see the ephone-dn conf' displays the number of active sessions to 7070

    Direct calls to the DN MeetMe (without going through the script) work very well.

    Logging in the atrace.log seems to show that reactivate the QUEUE calls will fail. I tested with all three SIP call transfer methods CUE without result.

    CUE and 2911 configs as well as the atrace.log CUE file is attached.

    Any ideas would be very appreciated.

    Hi Miroslav,

    You can check the method of transfer in CUE - please define Bye-also and without h450 service of voip telephony services in the CME.

    HTH,

    Alex

  • Phone call during the transfer of data

    Hi, the app I'm developing sends and receives large pieces of data from a server. During data transfer, if I phone the device running the application from the phone call fails to connect. It is only when the application has completed the transfer of data that a phone call can be connected.

    Is there a way to get the phone call to connect?

    The application was developed as a moped based on portability and is executed on a v4.2.1.94 platform 2.3.0.77 Pearl

    The transfer of data should be interrupted by the wireless network to allow the call to come.  Which network see you this on?  I commend this report to the carrier.

  • With the help of the network location and mapped a drive to the server FTP. during the transfer of very large amounts of the login information is always lost.

    With the help of the network location and mapped a drive to the server FTP off site; during the transfer of very large amounts of the login information is always lost.  Computer power settings are configured to not to do no matter what, I'm assuming that the ftp server can publish a scenerio timeout but is there a way for my computer and windows to restart the file transfer?

    Hello

    Thanks for posting your question in the Microsoft Community forums.

    I see from the description of the problem, you have a problem with networking on the FTP server.

    The question you posted would be better suited in the Technet Forums. I would post the query in the link below.

    http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

    Hope this information helps you. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.
  • iPhone 5 c does not always sound during calls to the.

    iPhone 5 c does not always sound during calls to the.

    Is do not disturb on?

    This is the icon of Crescent Moon at the top right of the screen

    If yes – you can control center - activate by sliding upward on the homescreen of the lower edge and tapping on the icon

    If this is not the case - check to see if these contacts are in your blocked list

  • NB100 restarts during the transfer of files and others

    Hi, there are some problems, I've had this days with my NB100:

    (1) blocking during the transfer of file with scp-online HW reboot. Seems to be a bug in driver wifi...
    (2) no way to restore my system after hibernation-online HW restart
    (3) Toshiba function auto zoom turned on sometimes when I come back just when the screen saver starts.

    In any case, it's a good NetBook, and it's really nice to see that ubuntu pre-installed on a Toshiba computer.

    Hello

    I noticed that Toshiba has offered some BIOS updates for similar problems.
    Have you checked Toshiba support page on the BIOS update?

  • Satellite Pro A110 crashes during the transfer of the large data in LAN

    Hello

    My Satellite Pro A110 crashes during the transfer of the large data in LAN. The network driver is a Realtek RTL8139/810 x Family Fast Ethernet NIC I've been looking through this forum and found some wire whit exactly the same problem, saying that the solution is to update Realtek lan set up in BIOS, not the computer BIOS, but I can't find any link to download the necessary upgrade file. Can anyone tell me please where to find this upgrade file or send it to me directly?

    Thanks in advance

    Is - this transfer of data in the company where you work? Do you want to download data from the server, or how to understand this? How to understand what you mean under big data?

    Have you tried downloading data on the Internet? For example, if you try to download some trailer HD (more than 200 MB)?

  • got the new ipad. during the transfer of applications, some are dark. Why?

    got the new ipad. during the transfer of applications, some are dark. Why?

    All applications are probably install and not finished yet. Make sure you are connected to a wireless network and let it enabled applications can continue to have downloaded and installed.

  • The echo during calls

    I have problems with my own voice echo to me during calls sometimes. Is it for someone to another expreriencing this?

    The only known problem that is being investigated on the echo / audio blurred is when you are in a coverage area is very low and just before the general appeal falls. Please let me know if it has any other call audio problems.

  • Locks screen during calls

    When I make a call on my premium Z5, the screen locks black and I can't use the functions until the phone is hung up by the person on the other end of the call. I did a complete reset, but it did not help, no matter who else had this problem?

    If the screen blocks black, this has something to do with your sensor, which is active during calls, so wash it in a very significant way.

    Calling someone without the sensor, it happen again?

  • Warning message to turn off "Are you sure that you want to copy this file/folder without its properties" message during the transfer of files and folders on network file servers? »

    Original title: Annoying message of loss of property

    Win7pro x 64 here.

    Is there a way to disable this annoying message "Are you sure you want to copy this file/folder without its properties" during the transfer of files and folders in all of network file servers?

    Pokermon salvation,

    It would be better if post you this question in the forum category below where this problem is related to Windows server 2003.

    Windows Server forums

    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

    If all goes well, they will be able to solve this problem.

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Impossible to find Personal Call Transfer rules Web tool

    Hi all

    I'm trying to access the personal call transfer rules Web tool through http://<> unit connection server > / ciscopca. After connection, I can not find the Personal Call Transfer rules Web Tool. Should I enable it somehow?

    Thank you

    Kristian

    Have you enabled it service class user?

    Chris

  • Keyboard of blackBerry Smartphone accessing during calls that I do

    I just got my Blackberry Storm yesterday because my Palm LifeDrive (which I liked) has a cracked screen and I wanted to migrate to an integrated phone/PDA solution.  My previous phone was a LG Dare I loved also.  It's just for the context.  Problem: when I call I want the pad to display by default.  It is heavy to go button options and then try to press the option "Show keyboard" during a call.  One of the default options that displays for "Speaker" when I make a call is annoying more useful because I accidentally turned on the speakerphone during a call several times.  Is there a way to change these options?  I searched these forums and the web, but couldn't find any doubt even closer, if I used probably just the wrong search terms.  Thanks for any help in this sense - I don't really like most of the things on this phone and read these forums helped me already.

    When phone mode, there is a small keyboard at the bottom left icon - you can press that instead of having to hit BBmenu > keyboard.  But apart from that, I don't think there is a way to have the keyboard default upward.

    As speaker, you should study an application similar to TalkLock or StormSlider they lock the screen during calls preventing the presses of the screen.

  • Notifications of Smartphones blackBerry during calls

    How can I get BBM, whatsapp, facebook notifications cat during calls on my bold 9780?

    Using EDGE (2G)? If so, you will not receive notifications.

    If you're on HSPA, it should work.

  • BlackBerry Smartphones Strange beep/feedback type sound during calls - blackberry Curve 8300

    When I'm on the phone with someone - anyone, regardless of locaton - I hear BOUNCING "beep" sound on my end of the phone. These aren't sounds system or calendar alerts, they sound a bit like feedback or R2D2 sounds. They come and go, but sometimes they are totally boring. I asked the people, I don't know whether or not they can hear sounds, and they reported that they cannot.  I called Verizon and they said they had never heard of this problem before.

    Everyone knows this? Is there anything we can do about it?

    Sorry, Yes, I do understand, I posted the wrong link above.

    http://supportforums.BlackBerry.com/T5/BlackBerry-Curve-BlackBerry-8300/feedback-issue-during-calls/...

    It is related to the system of exploitation.175 on the 8330.

Maybe you are looking for

  • Equium M70 - no icons or photo on your TV screen

    I have connected an S-video cable on my TV via my laptop. All I get on my TV is the image of the desktop, nothing else.I want to see is what I see on my laptop. Icons, files, internet, email, ect, ect. Is it possibleor should I do something else.

  • change of graphics HP compaq 6000 sf

    Hi all first time on the forum. I would like to change the graphic card installed on my desktop HP compaq HSTNC-058P-SF - dual core 3.16 Ghz - currently installed is Intel Q45/Q43 chipset (if I'm not mistaken...). I would like to install a 'better' g

  • Cannot access the data on Western Digital My Book Essential.

    Original title: Western Digital My Book Essential Cannot access data stored on My Book Essential 3 TB.  Desktop computer no longer recognizes.  Laptop sees it, but I can't access the data.  Cord replacement binding have at the least visible on laptop

  • Properly installed service pack 1 status has not updated the Windows edition information.

    Original title: windows vista 32-bit sp1 just installed the new hard drive on laptop. re-installed windows vista Home premium 32-bit. Traverse and filling all windows updates. service pack 1 is now next in line. 1.9 MB file downloads and "installed".

  • Error on blue screen Windows 7 x 86

    Hello, I had a lot of problems with my laptop. The technical support guy said that my HD was done, so he sold me a new one, with Windows 7 x 86 (before I had the x 64), and my cell phone was OK for a while. During this time, I had some blue screen er